Issues with SmartPhones not connecting to Cisco LWAP infrastructure

Has anyone observed any issues in getting wifi-enabled smartphones to connect to the Cisco LWAP wireless infrastructure?
In this particular case, the system is operating essentially as a hot-spot (i.e.: No layer 2 security between the LWAP and the smartphone.)
One of the SmartPhone models having problems is the Samsung i730.
I found an FAQ at the Verizon site (attached):
Exerpt from:
http://support.vzw.com/devices/samsung_sch-i730/faq.html#item66 <http://support.vzw.com/devices/samsung_sch-i730/faq.html#item66>
"Why doesn't the i730 connect to my wireless access point (AP) /router?
The i730 supports wireless access points that transmit a 128bit preamble not 130bit preamble. Some wireless access points send a 130bit (i.e. Cisco, Linksys, etc). To address this issue you can upgrade the firmware in your wireless access point by simply going to the wireless access point manufacturer's website and downloading the latest firmware and upgrade instructions."
Full article:
http://support.vzw.com/devices/samsung_sch-i730/faq.html <http://support.vzw.com/devices/samsung_sch-i730/faq.html>
I am wondering what version of LWAP firmware would address the 128-bit issue.
Any thoughts?
Thanks,
John

Try out the latest firmware for the controllers 4.0.206.0. This might solve the issue.

Similar Messages

  • Wifi issues with iphone not responding

    Phone: iPhone 4s.
    This issue started approximately two weeks ago. My phone initially started with the Wifi connection greyed out, I followed the appropriate steps to resolve this issue, and was successful. Now I can turn the wifi connection on without problems, but my iPhone will freeze (delay), then return me to my homescreen. Occasionally I do automatically connect to my known wifi, but then will disconnect and return to 3G. If I make an attempt to go to settings to manually reconnect, the phone again freezes. The phone seems to freeze after I click settings, then when pressing Wi-Fi, the bar turns dark bold, but freezes and doesn't open. I then have to click my home button, return to the main menu. Also if I open an app during the seldom opportunity my phone is connected to wifi, the phone will disconnect, return to 3G and freeze. I have rebooted my routers, forgot networks, reset network settings. I have thought about resetting the entire phone, but my phone will not stay connected to wifi long enough for me to back up my data to iCloud. I am thinking of stopping into my local verizon store, but I think they will redirect me to an apple store; which is 35 miles away. Of course the problem with me not connecting to Wi-Fi is my increased use of data. Now I am over 75% for my monthly usage with 2 weeks remaining, and do not see justification in possibly having to pay the overage fee. Many times when my phone freezes due to these wifi issues, or will not respond, I have to do the manual power/home reset. In conclusion, I need to figure out how to maintain my connection to Wi-fi, and stop my phone from not responding when I open my wifi settings. Thanks in advance!

    My Iphone 4S is doing the same thing..  All of a sudden the WIFI button is gray and not working.  I chatted online with a Rep.  He had me call *228 and hit option 1, then call again and hit option 2.  All of a sudden the WIFI button was black.  But it could not find any network.  I shut it off and restarted it and now button gray again.  I called that number again and still gray.  I read somewhere else that a lot of people have a problem with the WIFI button.  They say it basically just stops working.  This was a replacement phone because the volume stopped working on my original phone.  I assume they gave me a refurbished one because it didn't seem new.   I'm due an upgrade in 3 months.   I'm disabled and just hate driving to the store again.  I wish there was an easier way. 

  • Issues with our SSL connection to the Web dispatcher

    HI Alle,
    I having issues with our SSL connection to the Web dispatcher with SAP Web AS. Below is the error in the log files form dev_webdisp:
    Started service 80 for protocol HTTP on host "wdpeht1"(on all adapters) (processing timeout=120, keep_alive_timeout=30)
    [Thr 368] =================================================
    [Thr 368] = SSL Initialization  on  PC with Windows NT
    [Thr 368] =   (701_REL,Jan 28 2010,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
    [Thr 368]   profile param "ssl/ssl_lib" = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
               resulting Filename = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
    [Thr 368]   profile param "ssl/server_pse" = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
               resulting Filename = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    [Thr 368] =   found SAPCRYPTOLIB  5.5.5C pl29  (Jan 30 2010) MT-safe
    [Thr 368] =   current UserID: WDPEHT1\SAPServiceWDP
    [Thr 368] =   found SECUDIR environment variable
    [Thr 368] =   using SECUDIR=E:\usr\sap\WDP\W00\sec
    [Thr 368] * ERROR =>   secudessl_Create_SSL_CTX():  PSE "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" not found! [ssslsecu.c   1354]
    [Thr 368] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
      secude_error 4129 (0x00001021) = "The PSE does not exist"*
    [Thr 368] >> -
    Begin of Secude-SSL Errorstack -
    >>
    [Thr 368] ERROR in SSL_CTX_set_default_pse_by_name: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in ssl_set_pse: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in af_open: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in secsw_open: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in secsw_open_pse_or_extension: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in sec_get_PSEtype: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    [Thr 368] << -
    End of Secude-SSL Errorstack -
    [Thr 368] * ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
            for "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" [ssslxxi.c    2278]*
    [Thr 368]* ERROR => Initialization of SSL library failed -- NO SSL available!
    [Thr 368] =================================================
    [Thr 368] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR*
    [Thr 368] *** ERROR => IcmAddService: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv.c   319]
    [Thr 2128] IcmCreateWorkerThreads: created worker thread 0
    Regards

    Hi Olivier,
    Thanks for replay,
    The PSE does exist  in my SEC "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"  .
    I did tried Again I get  this error. I think I missing som parameter
    = SSL Initialization  on  PC with Windows NT
    [Thr 2292] =   (701_REL,Jan 28 2010,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
    [Thr 2292]   profile param "ssl/ssl_lib" = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
               resulting Filename = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
    [Thr 2292]   profile param "ssl/server_pse" = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
               resulting Filename = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    [Thr 2292] =   found SAPCRYPTOLIB  5.5.5C pl29  (Jan 30 2010) MT-safe
    [Thr 2292] =   current UserID: WDPEHT1\SAPServiceWDP
    [Thr 2292] =   found SECUDIR environment variable
    [Thr 2292] =   using SECUDIR=E:\usr\sap\WDP\W00\sec
    [Thr 2292] -*ERROR =>   secudessl_Create_SSL_CTX():  PSE "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" not found! [ssslsecu.c   1354]
    [Thr 2292] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
      secude_error 1281 (0x00000501) = "open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned"*-
    [Thr 2292] >> -
    Begin of Secude-SSL Errorstack -
    >>
    [Thr 2292] -*ERROR in SSL_CTX_set_default_pse_by_name: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"*-
    -*ERROR in ssl_set_pse: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in af_open: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"*-
    ERROR in secsw_open: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in secsw_open_pse_or_extension: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in sec_get_PSEtype: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in aux_read_PSEFile: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in aux_file2OctetString: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    [Thr 2292] << -
    End of Secude-SSL Errorstack -
    [Thr 2292] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
            for "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" [ssslxxi.c    2278]
    [Thr 2292] *** ERROR => Initialization of SSL library failed -- NO SSL available!
    [Thr 2292] =================================================
    [Thr 2292] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR
    [Thr 2292] *** ERROR => IcmAddService: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv.c   319]
    Her is my profile parameter for https.
    h6*#Https parameters for Web dispatcher  E:\usr\sap\WDP\W00\sec
    #icm/server_port_0 = PROT=HTTPS,PORT=443$$
    DIR_INSTANCE = E:\usr\sap\WDP\W00\sec
    ssl/ssl_lib = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
    ssl/server_pse = E:\usr\sap\WDP\W00\sec\SAPSSL.pse
    wdisp/ssl_cred = E:\usr\sap\WDP\W00\sec\SAPSSL.pse
    ssf/ssfapi_lib = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
    sec/libsapsecu = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
    ssf/name = SAPSECULIB
    wdisp/ssl_encrypt = 0
    icm/server_port_1=PROT=HTTPS, PORT=8400, TIMEOUT=120
    ###icm/server_port_1=PROT=HTTPS, PORT=44302, TIMEOUT=900 (old)
    ########icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=120
    icm/HTTPS/verify_client=0
    wdisp/add_client_protocol_header = true
    wdisp/auto_refresh = 120
    wdisp/max_servers = 100
    wdisp/ssl_auth= 0
    ms/https_port = 8400
    wdisp/HTTP/use_pool_for_new_conn=1
    wdisp/HTTPS/dest_logon_group = HTTPS
    #wdisp/server_info_protocol = https
    #wdisp/group_info_protocol = https
    #wdisp/url_map_protocol = https
    wdisp/ssl_ignore_host_mismatch = fals
    icm/HTTPS/forward_ccert_as_header = true
    icm/HTTPS/trust_client_with_issuer = CN = SAP CA,*
    icm/HTTPS/trust_client_with_subject = CN = sapwebdisp,*h6
    Regards

  • Issue with Calendar not syncing with iPhone 3g

    Issue with Calendar not syncing with iPhone 3g.
    Solution
    Create backup of your entire mailbox before starting (THIS IS IMPORTANT)
    Create offline folder (.pst file) Check windows help on how to do this for your version.
    Open folders view on Outlook
    Right click on Calendar in tree view and 'copy to' offline .pst folder
    Go back to main calendar view and delete all entries in your calendar.
    Create simple cal entry and sync test with iphone
    If this works then start dragging cal entries back from the offline folder into the main calendar then sync after each step....
    I moved events in this order
    -Yearly recurrences (ie Birthdays)
    - Monthly recurrences
    - weekly recurrences
    - Daily recurrences
    All appointments from the beginning of this year >> to the end of time!
    If all these sync then the issue is with an older cal item and you have to decide if you actually need these in you current calendar.
    I chose to leave these in the offline cal and if i need access them from there.
    If at any point the sync fails then you know you have a corrupt cal entry in the block you just transferred. Move the offending items back into the offline folder and try again in smaller chunks until you identify the offending items and delete them and manually recreate them in your real calendar.
    Also smart to run the inbox (.pst /.ost ) repair tools for your OS/Outlook version.
    Fixed so far
    XP Pro / Outlook 2008
    XP Pro /Outlook 2003

    I just updated the firmware to iPhone 2.0.1 and the syncing works great both ways.

  • When is the next ios update and will it fix/address the issue with photos not being shown in chronilogical order?

    when is the next ios update and will it fix/address the issue with photos not being shown in chronological order?

    All of us here are users just like you. We have no inside info of when Apple products or operating system updates/upgrades will be released. The next iOS may not even change the issue you have.
     Cheers, Tom

  • Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????

    Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????  AT&T my DSL carrier suggests I get a new router.  Apparently the one I have is really old and doesn't support my Macbook Pro.  Does this sound right?

    If your using WEP encryption yes, Apple has discontinued that becaues it's worthless. WEP (and WPA) is cracked so encryption makes no sense.
    Get a new Wireless N router, set it up with WPA2 (AES) Personal and two different 20+ randon letter/numbersymbol character passwords
    One for Admin access only of the router, keep this on paper off all comptuers in a safe someplace.
    One for entering into devices, computers etc for Internet Access Only.
    You need the long and random password to defeat brute force attacks by GPU software that the hackers have now.
    Also if you give out the password to another, they can't hack the network with the guest access password.
    Computers remember the internet password, so anyone with access to your machines or network will have the password.
    Since you have another Admin only password, they can't hack in. got it?
    You don't need "Invisible" or "MAC Address filtering" that's a waste of time as hackers can sniff a network and causes issues getting on the network.
    Good luck.

  • How do I fix issue with computer not authorized yet when authorized it indicated already authorized?

    How do I fix issue with computer not authorized yet when I go to I-Tunes to authorized it indicated already authorized?

    I updated to iOS 5.0.1 days ago and didn't receive that notification until just now...
    This time I synced new photos I took yesterday, and it gave me the:
    "iTunes Sync: 54 items could not be synced. See iTunes for more information"
    Perhaps it kicks off when new items get synced.
    I've decided to rent a movie yesterday. Once it gets deleted, I'm curious to see if it jumps to 55 items.

  • I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

    I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

    I imagine your clients must be using Outlook, which is seriously broken when it comes to e-mail standards, especially HTML e-mail. You can work around the issues with Outlook by only sending plain-text e-mails and making sure that, in the Edit -> Attachments menu, the last two options are checked. Unfortunately, that means that HTML signatures are out.
    If you need something with a fancy layout, either attach a PDF file to the e-mail or include a link to a website in the e-mail.

  • My iPhone 5 keeps on trying to connect the hotspot with wifi not connected. will not allow me to select hotspot at all

    My iPhone 5 keeps on trying to connect the hotspot with wifi not connected. will not allow me to select hotspot at all. can anyone help am in Botswana an no apple store to help?

    I have the same problem, it's better trade my iPhone, or the apple it's gonna fix at the next upgrade? Please, someone help me, I try everything.

  • HP Pavilion 15t Issues with Limited Internet Connectivity on Windows 8

    So, I just received my new HP Pavilion 15t-e000 CTO Notebook PC last week, it runs Windows 8, &amp; it's a 64 bit.
    The only problem I've had is staying connected to my wireless Internet. The connection will cut out at random intervals saying "Limited" instead of "Connected". I constantly have to disconnect and connect to my wireless Internet. It is especially frustrating when I am trying to download something that takes longer than a couple of minutes because the Internet connection cuts out and I have to start the process all over again.
    I have tried pretty much every "fix" people have posted that have worked for some people. No such luck for me. Sometimes it seems like it will stay connected and then I try to connect to a web page or download something and it goes out again.
    - Turning off the "Allow computer to turn off this device to save power" under Power Management in the Properties section of my Wireless connection.... DID NOT WORK
    - Using the command prompt to reset the network adapter ... DID NOT WORK
    - Running the Network and Internet and whatever else Troubleshooters ... DID NOT WORK ***Update: If I run the network connection test via the HP Help/Support center on my desktop while the connection says Limited, I receive the notice that the "default gateway was not available" and the router was reset and issue fixed, etc. BUT, if I run the test while the wireless says Connected, the test always says there is no problem. And even though the test "fixed" the issue, it didn't because the Internet always cuts out again.
    - Windows Updates has installed new updates a few times ... DID NOT WORK
    - Forgetting the Wireless Network and Setting it Up as a new one again ... DID NOT WORK
    - Using my computer right next to my wireless router ... DID NOT WORK
    The wireless router being used is: Cisco Linksys Wireless-G 2.4GHz Broadband Router and our network is WPA with a security code. We also have a SpeedStream DSL Internet thing (sorry, I don't know what it is called). The compatibility center says this router is compatible with Windows 8 by the way. Other computers running Windows 7 and Windows Vista, iPhones, and iPads all work fine.
    My laptop uses Intel(R) Centrino(R) Wireless-N 2230 and the light is on and it always says "device is working properly" in Properties.
    Any help or suggestions would be greatly appreciated because I am at my wits end.
    Thanks
    This question was solved.
    View Solution.

    So, it seems my issue with the Limited Internet connection has been resolved. I didn't use my computer for two days and this afternoon when I turned it on I was still having issues. However, I went into the HP Support Assistant and it popped up that I had some updates to download and install, so I let it do its thing. It took a while because the Internet kept cutting out, but once the update for the Intel Wireless finally installed, my connection has STAYED CONNECTED. Finally!
    I don't know why when I went into the wireless properties it said "device is working properly" and when I tried to Update the driver it said "your driver is the latest version" or whatever.
    I suggest you go to the HP Support Assistant and check for updates in the "Updates and Tune-Ups" section. It was kind of random, but knock on wood my Wireless connection issue looks to be gone.
    Hope this helps
    P.S.
    Here's a screen shot of what the HP Support Assistant (it is the one with the big question mark logo) main screen looks like :

  • MacBook Pro will not connect to Cisco Wireless Network

    I have just bought a brand new MacBook Pro, running Leopard (OSX 10.5.1) and I just cannot get it to connect to the Wireless Network at my workplace.
    The MBP connects to wireless network and authenticates just fine, but will not obtain an IP address from the DHCP server.
    The wireless network consists of 16 Cisco Aironet 1200 Access Points controlled by a Cisco Wireless Network Controller. It does not broadcast its SSID and is WEP 128-bit hex protected.
    Changing the network from WEP to WPA is out of the question for me as this is under the control of my customers IT Department and they do not have any problems with their PCs connecting to the network. It appears to be an Apple issue.
    For reference, my old Vaio PC, my Nokia N95 and my iPod Touch ALL connect to the same wireless network without any problems whatsoever, first time, every time!
    If I boot into Windows XP from my Boot Camp partition, XP can connect wirelessly to the network without any problems, so it is not MacBook hardware related...
    It has to be a bug in Mac OSX... doesn't it?!?
    Things I have already tried (following suggestions on many forums):
    * Switching Airport off/on
    * Deleting various network-related Plist files and rebooting
    * Manually assigning an IP Address (not really permitted but doesn't work anyway!)
    * Disabling all network adaptors except Airport
    AP Grapher shows that the MBP is connected to the wireless network, at good strength, and packets are being sent and received, but Internet Access is not possible as no IP Address has been assigned. Instead, my MBP shows a 169.* IP Address (self-assigned). It should be a 10.1.255.* address.
    Can anybody please help? Thank you.

    i posted this same reply elsewhere because it worked for me for my Buffalo wireless router: try manually setting your IP address instead of relying on DHCP, which sometimes (I don't know why) doesn't work well with Macs. It's a good get around. I am a happy Mac user but nothing is perfect on earth, and when the Mac gives problems, it does give a lot of frustration. Macs are not as easy to troubleshoot as Win because a Mac is built to be user friendly(and it works most of the time), meaning a lot of the background computing stuff is hidden away from users to avoid user accidentally upsetting some settings.
    Unfortunately, the highly automated troubleshooting wizards provided by OS X are not perfect so when these software wizards fail to resolve the problem, like my Network Diagnostics, I have to spend more time tinkering around. There's "Terminal" of course but then most of us, especially PC converts to Macs, don't know how to use it.
    You should also try updating your MBP, see if there are any new updates being released.

  • Exchange 2013 CU5 fresh install suffering issues with services not starting and coexistence with 2007

    Hi everyone,
    Hope you can help me out on a couple of issues I've been experiencing during the initial stages of a project to upgrade an on premise Exchange 2007 to 2013.
    On Monday last week I installed the first Exchange 2013 server into the network after a few weeks of careful planning, information gathering and remediation of our current Exchange 2007 environment and associated systems.
    The server itself has been having some issues from the word go, some of which I've resolved but none that are show stoppers but I want to get them resolved before building more servers and setting up the planned 2 x 2 node DAG's
    The main problems are as follows:
    There's usually one service that does not start following an OS restart and it's not always the same service. So far I've seen the following not start: DAG Management, Migration Workflow, Anti-spam Update, Unified Messaging, UM Call Router, Transport
    Service.
    The critical system event log entries are complaining of timeouts when the services are starting up but I can't imagine that the servers boot time is too long...  It's a 2 vCPU/12Gb vRAM VM, Windows 2012 R2
    I receive an error in the Event Log regarding RPC over HTTP Proxy
    to one of the 2007 CAS servers (not our primary one). The first error was because the Windows Component was missing but since installing it, disabling Outlook Anywhere, reenabling it, restarting the server, I now have a new error which is shown further down
    this post
    The Exchange 2013 server install is pretty default, CAS/MBX roles and some basic configuration performed such as new DNS entries, Public SSL certs installed and assigned, URL's updates, SCP updated. I have review and resolved some errors from the event logs
    for over chatty warnings about disk space (the warning is that we have loads of space...)
    This is a brief outline of the environment:
    Exchange 2007 SP3 RU13
    UK - Two physical locations in a stretch LAN (100Mb WAN)
    4 x CCR Cluster Mailbox Servers in two separate CCR Clusters
    Cluster 1 - Windows 2003 R2: One physical, one virtual server - don't ask, legacy install and I know the virtual is not a supported configuration.
    Cluster 2 - Windows 2008 R2: Two virtuals - New cluster built following a 4 day failure of Cluster 1. The aim was to move to supported config and decommission cluster 1.
    Note: Migration of Cluster 1 to Cluster 2 was halted as 2013 was so close it seemed pointless to continue the migration and instead migrate both Clusters to 2013 once in production.
    2 x Virtual Windows 2003 R2 - Hub Transport Servers
    2 x Virtual Windows 2003 R2 - Client Access Servers
    1 x Virtual Windows 2003 R2 - Unified Messaging Server
    1 x Virtual Windows 2003 R2 - Edge Transport Server (DMZ)
    US - One physical location
    1 x Physical Windows 2008 R2 - Mailbox, Client Access, Hub Transport Server
    Exchange 2013 CU5
    UK - Installed into same site along side Exchange 2007 servers
    1 x Virtual Windows 2012 R2 - Mailbox, Client Access Server
    Problem 2 Error Message - Please note, server names and domain name changed:
    Log Name:      Application
    Source:        MSExchange Front End HTTP Proxy
    Date:          18/07/2014 10:00:37
    Event ID:      3005
    Task Category: Core
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      EXC2013.domain.local
    Description:
    [RpcHttp] Marking ClientAccess 2010 server EXC2007CAS1.domain.local (https://EXC2007CAS1.domain.local/rpc/rpcproxy.dll) as unhealthy due to exception: System.Net.WebException: The underlying connection was closed: The connection was closed unexpectedly.
       at System.Net.HttpWebRequest.GetResponse()
       at Microsoft.Exchange.HttpProxy.ProtocolPingStrategyBase.Ping(Uri url)
    Event Xml:
    <Event xmlns=http://schemas.microsoft.com/win/2004/08/events/event>
      <System>
        <Provider Name="MSExchange Front End HTTP Proxy" />
        <EventID Qualifiers="32768">3005</EventID>
        <Level>3</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-07-18T09:00:37.000000000Z" />
        <EventRecordID>64832</EventRecordID>
        <Channel>Application</Channel>
        <Computer>EXC2013.domain.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>RpcHttp</Data>
        <Data>EXC2007CAS1.domain.local</Data>
        <Data>https://EXC2007CAS1.domain.local/rpc/rpcproxy.dll</Data>
        <Data>System.Net.WebException: The underlying connection was closed: The connection was closed unexpectedly.
       at System.Net.HttpWebRequest.GetResponse()
       at Microsoft.Exchange.HttpProxy.ProtocolPingStrategyBase.Ping(Uri url)</Data>
      </EventData>
    </Event>

    Hi Off2work,
    I've gone through the article and the Get-OutlookAnywhere commandlet looks fine (especially when compared with our working CAS).
    Having looked through IIS I have spotted two additional misconfigurations with a missing setting to require SSL on the RPC folder and also the .NET version was not set.
    I've now set those to Require SSL and .NET 2.0.5072 however this has made no difference following restarted of both 2007 CAS and 2013 servers.
    I could potentially reinstall the CAS server or additionally decommission it as we have two of them and the other is not causing any errors with the 2013 server. This broken CAS server doesn't even have DNS records (except it's own hostname) or firewall
    rules pointing to it, nor does it have any active client connections if I check with a quick netstat -a
    As for UM, it's next on my list following some client/server connectivity testing so I have not yet assigned the SSL to the services or setup the dial plans, etc.
    The services do start most of the time, but others then don't so it's not a consistent issue with just this service. On my current boot, the DAG Management service failed to start, but again I don't have a DAG implemented yet.
    I will see if UM drops out of that list once I've configured it shortly
    Thanks for taking the time to respond (and that goes to DareDevil too)

  • Issue with backup NCS via NFS (Cisco Prime NCS 1.2.0)

    Hello,
    Does someone have issue with backup NCS via externally mounted location (NFS)?
    I have Cisco Prime NCS 1.2.0 and tried backup it to external resources, but I have issue with my free space:
    NCS/admin# backup ncs repository backup_nfs
    % Creating backup with timestamped filename: ncs-130131-0534.tar.gpg
    INFO : Cannot configure the backup directory size settings as the free space available is less than the current database size.
    You do not have enough disk space available in your repository to complete this backup.
    DB size is 25 GB
    Available size is 12 GB
    Please refer to the command reference guide for NCS and look at the /backup-staging-url/ command reference to setup the backup repository on an externally mounted location
      Stage 5 of 7: Building backup file ...
      -- complete.
      Stage 6 of 7: Encrypting backup file ...
      -- complete.
      Stage 7 of 7: Transferring backup file ...
      -- complete.
    I have tried to add additional space and use command backup-staging-url (my configuration: backup-staging-url nfs://server2008:/nfs), but it didn't help me.
    NFS share works perfect. I have checked it via NFS repository:
    repository backup_nfs
      url nfs://server2008:/nfs
    +++++++++++++++++++++++++++++++++++++++
    NCS/admin# show repository backup_nfs
    NCS-130130-1135.tar.gpg
    NCS-130130-1137.tar.gpg
    NCS-130130-1157.tar.gpg
    NCS-130130-1158.tar.gpg
    test-130130-1210.tar.gz
    Everytime when I try create backup I receive error message "You do not have enough disk space available in your repository to complete this backup".
    Does someone know how can I backup NCS system?
    Thank you

    How much space is availabe on that NFS mount point? It looks like to me from the error message that there is only 12 GB.... 
    The backup-staging-url is just for a space used to stage the backup before it is written-----

  • Issue with MSSQL server connectivity from ODI 10.1.3

    Hi,
    In one of the interface we are populating data to target table in MSSQL server version 2005.
    The physical topology connection results successful.
    Since so long there is no problem and it is running successful. But suddenly I'm facing issues with this.
    I cannot see teh datastores under the model created for this table. When expanding the model, when trying to reverse the model or when I am trying to save any changes in the package I am getting the below error.
    java.lang.UnsupportedClassVersionError: com/microsoft/sqlserver/jdbc/SQLServerDriver (Unsupported major.minor version 49.0)
         at java.lang.ClassLoader.defineClass0(Native Method)
         at java.lang.ClassLoader.defineClass(Unknown Source)
         at java.security.SecureClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.access$100(Unknown Source)
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Unknown Source)
         at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
         at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
         at com.sunopsis.sql.SnpsConnection.connect(SnpsConnection.java)
         at com.sunopsis.dwg.reverse.Reverse.a(Reverse.java)
         at com.sunopsis.graphical.component.b.a.g.a(g.java)
         at com.sunopsis.graphical.component.b.a.g.a(g.java)
         at com.sunopsis.graphical.component.b.a.d.a(d.java)
         at com.sunopsis.graphical.component.b.h.e(h.java)
         at com.sunopsis.graphical.component.b.h.b(h.java)
         at com.sunopsis.graphical.component.b.h.b(h.java)
         at com.sunopsis.graphical.component.b.h.b(h.java)
         at com.sunopsis.graphical.component.b.h.a(h.java)
         at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshSplitFrame(SnpsSplitFrame.java)
         at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshNode(SnpsSplitFrame.java)
         at com.sunopsis.graphical.frame.bp.bN(bp.java)
         at com.sunopsis.graphical.frame.bp.bL(bp.java)
         at com.sunopsis.graphical.frame.a.is.bH(is.java)
         at com.sunopsis.graphical.frame.bo.r(bo.java)
         at com.sunopsis.graphical.frame.bo.bv(bo.java)
         at com.sunopsis.graphical.frame.bo.z(bo.java)
         at com.sunopsis.graphical.frame.bo.b(bo.java)
         at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Window.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    I have verified below:
    The SQL server version is: MSSQL server 2005
    the "sqljdbc.jar" file is there in place "<ORACLE_HOME>/oracledi/drivers"
    Java version: jdk1.5.0
    There is no change in source or target db. Please help me to fix this issue

    Hi,
    Thanks for the reply. The link is helpful and its the same what is there in the environment.
    "The JDK version is 1.5 and JRE version is 1.4.2."
    But, this was working fine till last week. I am worried, if the issue is due to version compatability why we were not facing this issue before. There is no changes in the environment since go live of this interface.
    Thanks,

  • Permissions Issue with Infopath Data Connection

    I'm not really sure how else to title this....
    Issue - InfoPath Form on SharePoint 2010 gives 'You do not have permissions to access a SharePoint list that contains data required for this form to function correctly."
    It gives a correlation ID
    Log file shows
    "Exception Message: The form cannot run the specified query. The list could not be found."
    Note the look-up is to a SharePoint list on the same content database.
    We have two Web-Front End servers with a load balancer.  We've had a number of other permissions type issues when the 'token' gets switched from one server to another, so we have the HOSTs file on each server pointing back to itself, so that once a
    server is 'grabbed' it stays on the same one.
    The error we are having currently, only seems to be occurring on the first Web Front End Server.
    Also we have sharepoint setup with an address of
    http://sharepoint.domain.com as well as an alias. http://sharepoint.
    The error we are having currently, only occurs if I use the fully qualified domain
    " http://sharepoint.domain.com" on the InfoPath data connection.  If I use the shortened alias, the error does not occur.  That is the current/easy solution, but I would like
    to fix it 'correctly' if possible.
    So, it appears to me that only on one of the Web Front End servers, it isn't liking the fully qualified path when doing a data connection.

    Hi ,
    Is the above issue fixed . if not please check below option
    Check the List / Library  [Source for dataconnection ] permission setting .
    If the permission is unique [ restricted from root site].  we  will the above type error message
    Velu K

Maybe you are looking for