Issues with speed changing on clips

i have a issue with speeding up clips. ive exported a slideshow and them imported it into imovie but noticed it was a bit too long..i tried speeding up the clip but when i do and try to play the clip it just shows a black screen..however if i hit backspace and revert it back to original it plays fine..any ideas whats going on? this is soo frusterating to go back and for between the two programs and be off by a few seconds? ?thanks

well the audio built into the slideshow clip im not worried about..but yes bascially its a bit too long..and for some reason the speed tool will change the width of the clip to a perfect length but then when i go to play on it and check it..i just get a black screen..its just quite irritating to have to go back and forth exporting and cause im 8 seconds to long or whatever you know. thanks everyone hopefully my descrition is better this time.
i have to try a regular video clip and see what happens..it may only be a iphoto slideshow issue.

Similar Messages

  • Issue with PO change output - Service line items

    Hi All,
    This is issue with PO change output. We have PO with line item 10, 20 and item 10 has 4 service line items. PO is approved and initial print out is taken.
    Some one goes and makes changes to 1st service line items of PO line item 10.
    A change output gets triggered. When this output is printed, it prints line item 10 details. This is standard functionality as this item is changed. But its printing all the service line items for this PO line item. Consider a case where there are 3000 service lines for a PO item. If I add 1 service item to this PO line item, the change form prints 3001 services for that line item. There were no changes done to first 3000 service line items.
    Currently PO change form takes care of changes at PO line item but it does not take care of changes at service line item level.
    Is there any setting that needs to be done for this so that it only considers the changes at Service line item level also.
    Regards,
    Shahu

    If you're using a standard form, send a message to SAP. Otherwise make a change in the form.

  • Clips with speed change freeze upon export

    When previewing my finished movie in FCP everything looks great, but when I export it all clips with a speed change - constant not variable - freeze up on a single frame. I cannot figure this out, any ideas? Thanks.

    Export Directly from Final Cut, using *Quicktime Conversion:*
    Click Options...
    *VIDEO settings*
    COMPRESION: H264
    Quality HIgh
    Key frame rate 24
    Bitrate 1000
    frame reordering YES
    encoding mode: Multipass
    Dimensions 320 x 240
    SOUND
    AAC, 32 Khz (good or normal)
    Perhaps this will help... ( I do a lot of motion graphics in final cut and use this for sending for client approvals...) for bit rate I usually use 650 to 850, but I saw in the Compresser web settings, bitrate was 1000...
    ALSO< is your original video interlaced? If so, try checking off option De Interlace (in size) or vice versa...

  • How do You Make Accurate Speed Changes To Clips?

    How do you apply a speed change to an audio clip in with frame accuracy? I have 2 audio clips, one from a camera and the other from a cheap solid-state recorder. The latter has audio drift and needs a one-off, constant adjustment to sync it with the camera audio.
    However, FCP only wants to execute clip speed changes down to 1/10th of 1%, which is not small enough. Does anyone know what to do here - either within FCP or Sountrack Pro? Thanks.

    I just know that often when capturing long segments of DV tape for our shows, we occasionally get a clip that comes in at 47.998 or 48.002, instead of the solid 48kHz.
    When I export to aiff, it seems to clear up any sync drifting we experience with the original clips.
    Might give it a go.
    STPro is a solid option as others pointed out. I simply suggested a quick fix to a possible sync/drift issue. (quicker than learning a new interface...though that's something that should be done anyway, for the tools STPro offers).
    K

  • Imovie '09 v8.0.5 bugs with speed change and titles

    OK so here is what I'm experiencing.
    I take a clip and change the speed. Then I add transition from the previous clip to this one and all of a sudden I cannot play the video again. I can't delete the slowed down clip even. I can play video that is in the events library, but not that in my project. When I do mouse over the beginning of my video and play I can hear the sound but it is like it is far off in the distance and the video is just solid gray. I have run into many other similar bugs when changing the speed of a clip but could always delete the clip, quit, relaunch, and try again. With this problem I added a transition and can't even delete the clip. Apple please address this issue. Thanks!

    I am having the exact same issue. Change the speed of a clip in the project, then the ongoing video screen no longer displays the project correctly (but does display when playing clips from the library). This happened recently as I've made several older projects on iMovie 09 using multiple speeds. Perhaps a bug with the 8.0.5 update.

  • Issues with Speed Ramps in Premiere CC

    Hey all,
    I opened a project that I copied from one drive to another and got this issue on some clips:
    In the past, I've seen this happen on clips that were, say, 60fps and then being interpreted at 24fps. In this case, the original is 23.976, with only a Speed/Duration adjustment.
    I tried referencing the original project on the original setup. When I frame match, it gives me TC readings that are way beyond the clips (08:52:40:00 but it only goes up to 08:52:05:00)
    There are a ton of clips that have speed effects in the project but these are the only two that have this. What's wrong with them? How can I fix it?

    Changing the speed on one or more of your timeline clips has resulted in these clips asking for more frames than are in the source media.  That's why you're getting the danger stripes.  It's unclear if your issue was caused by what was done to these clips in particular, or if it was caused by speed changes on other clips in the timeline.  Pay particular attention to clips immediately surrounding the problem clips.
    Cheers,
    Jeff

  • Adobe Media Encoder CS4 Causing Jerky Playback with Speed Changes

    Here is an Matrox AVI that was captured in Adobe Premiere Pro CS4. Watching the edited clip with a speed change of 600% looked fine when played in Premiere Pro CS4.
    When I export the clip using Adobe Media Encoder CS4 as MPEG2 Blu-ray with a preset of 1440 x 1080i High Quality playback is very jerky. An export of the same clip with normal speed looks great??
    Any suggestions would be greatly appreciated
    Thanks
    Type: Matrox AVI
    File Size: 119.9 MB
    Image Size: 1440 x 1080
    Pixel Depth: 24
    Frame Rate: 29.97
    Source Audio Format: 48000 Hz - 16 bit - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 00;00;36;27
    Average Data Rate: 3.2 MB / second
    Pixel Aspect Ratio: 1.3333
    Codec Type: MPEG-2 IBP
    Bit Depth: 8
    Scan Mode: Interlaced - Upper Field First
    Actual Image Size: 1440 x 1080
    Here are the specs on my workstation
    Case: Coolmaster-830
    Op System: Vista Ultima 64 Bit
    Edit Suite: Adobe Creative Suite 4 Production Premium Line Upgrade
    Adobe Premiere Pro CS 4.0.1 update before installing RT.X2 Card and 4.0 tools
    Performed updates on all Adobe Production Premium Products as of 03/09/2009
    Matrox RTX2 4.0 Tools
    Main Display: Dell 3007 30"
    DVI Monitor: Dell 2408WFP 24"
    MB: ASUS P5E3 Deluxe/WiFi-AP LGA 775 Intel X38
    Display Card: SAPPHIRE Radeon HD 4870 512MB GDDR5 Toxic ver.
    PS: Corsair|CMPSU-1000HX 1000W
    CPU: INTEL Quad Core Q9650 3G
    MEM: 2Gx4|Corsair TW3X4G1333C9DHXR DDR3 (8 Gigs Total)
    1 Sys Drive: Seagate Barracuda 7200.11 500GB 7200 RPM 32MB
    Cache SATA 3.0Gb/s
    2 Raid 0: Seagate Barracuda 7200.11 500GB 7200 RPM 32MB Cache SATA 3.0Gb/s Using Intel's integrared Raid Controller on MB

    Have you ever upgraded Adobe Premiere Pro in the middle of a project?
    By the way I captured the same clip in Adobe software only mode using HDV as a capture settings.  The editing mode is Adobe HDV 1080i, 29.97 frames. The results are also jerky. When I render the clip captured it is also very grainy??
    Type: MPEG Movie
    File Size: 196.4 MB
    Image Size: 1440 x 1080
    Pixel Depth: 32
    Frame Rate: 29.97
    Source Audio Format: 48000 Hz - compressed - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Average Data Rate: 3.2 MB / second
    Pixel Aspect Ratio: 1.3333
    Thanks for responding so quickly!

  • Export EDL or XML for seq with speed change

    Hi,
    I am trying to export an EDL or XML of a 30 sec sequence of 10 clips. 5 of them have speed change. Basic speed change, not variable. They are UC 10bit from a DigiBeta captured with a Kona 2.
    The problem is that the exported EDL or XML doesn't get the right clips in and out points for recapture on other systems. Any clue?

    As long as there are speedchanges in the sequence, FCP will screw the EDL timecodes for source clip in/out and position in the timeline....and it's way off.
    And the problem is not with Flame, if I open the XML or EDL in TextEdit, I see the TC mistakes. We do that all the time with the Avid MC and it works very well. Even if the speed changes wouldn't go through, I would expect clips coordonates and in/out to be ok.

  • Problem with speed change in Twixtor Pro

    Using Twixtor 5.0 and After Effects CS6, and I'm struggling with a situation where keyframing the Speed% change causes the slow frames to freeze for several frames at a time.
    What works:
    Drop clip into new comp
    Enable Time-remaping, and extend the length of the comp to a good minute or so longer than source clip
    Add Twixtor Pro to clip layer (appears to behave the same if you drop this comp into another clip and apply to that)
    Set frame rate to match comp's (and clips)
    Set speed% to something low, like 5.
    Clip plays back nice and smooth and slow, every frame is interpolated.
    What doesn't work:
    Repeat above steps... up to 5
    Set a keyframe for speed% to 1000
    Advance playhead ahead a second, set another keyframe to maintain speed
    Move several frames, set keyframe for speed% to 5
    When I playback the clip, after the last speed change, instead of nice smooth motion, I get a still frame, then several identical frames, then it jumps again to the next incremental frame, and so on – with NO smooth interpolated frames. The result, as you can guess, is quite jerky.
    If you trash all the keyframes and just leave the speed change to 5, it plays totally smooth. Which is just great, except for the fact I want to actually animate it.
    Has anyone encountered this?
    In the meantime as a backup, I'm using Timewarp, but I would love to sort this out.

    Hi Rick, I appreciate your persistence to help. That's definitely another way to use the plugin which I've never used in the past, but does eliminate the need to enable time-remapping. Certainly not as common as the majority of the tutorials out there, including Re:Vision's own.
    For the sake of argument I tried this approach, but unfortunately the problem persists. Out of curiosity, were there specific problems you avoided by using the solid method vs applying directly to the footage?
    If I can dig up my serial numbers I will install the CS6 update as instructed. I'll definitely update this post if I get any positive results.
    UPDATE:
    I'm pleased to say upgrading to 5.1.5 fixed the problem!

  • Audio will slow down with speed change, but not speed up

    I'm using FCP 6.0.6 and am trying to adjust the speed of an audio clip and some odd things are happening.
    If I change the speed of a clip to, say, 130%, the clip shortens appropriately, but the audio don't change. It just crops it off. And in the speed dialog box, the drop down menu is grayed out and Constant Speed is chosen.
    If I choose to slow down the clip, to say 75%, everything seems to work. The audio is slowed, the clip lengthens, but then I can't change it to anything else. It says slow regardless of any adjustments in the speed dialog box. I have to go back through "Undo"s to get it to change.
    Am I doing something wrong? I read some questions about this with people using FCP 7 and that seems like how mine should be working.
    Thanks in advance,
    Mark

    Well, it is an .AIFF file converted from .WAV in Quicktime. It is 187.5 megs and has a datarate of 344.5 k/sec. It is stereo at 44.1K and has a 32-bit Floating point.
    That help? I actually just was able to do the time compression in Soundtrack Pro. But I'm sure I've done it in the past directly in FCP.

  • Regarding the Cheque printing in SAP Script. Issue with Layout Change.

    I have to modify the layout of a predeveloped script.
    The issue with the existing one is that, the Labels (on the window, that is printed) and the data (corresponding to it) are not on the same line.
    To be more clear, I have like this on the cheque,
    Payee : _______________________
    Amount : ____________________
    The Data corresponding to the Pay & Amount is not in the respective line (as I shown above).
    How can I get that both on the same line.?
    Shall I need to modify the layout or what else to do ?
    Pls. guide me.
    Your guidance is appreciable.
    Edited by: ravikanth seal on Mar 9, 2011 5:09 AM
    Edited by: ravikanth seal on Mar 9, 2011 5:10 AM

    Hi niraj gadre ..
    Ur idea may not workout fir me.
    My idea is :
    Can I use any formating options in the corresponding window's text elements..
    Pressing F9 on the windiw (in the Windows list) displays the Text Elements (Goto Edit-> Text Elemets on the Window chosen) in the Windows list.
    Here can we do any formating options, so as to change the layout alignment of window's Text Elements ??
    Guide me please.
    Your guidance is Appreciable
    Thanks.
    Edited by: ravikanth seal on Mar 9, 2011 7:55 AM

  • Having issues with speed with opening/dowloading/installing from some websites

    Had speed issues with my ISP and they seem to think it is because of the browser, and that I should be using IE. Knowing my ISP is not going to take responsibilities if the fault was on their side, I did not believe it. However, when Microsoft stopped support for XP operating system, I tried to download a security program from another website and again I had nothing but problems. The program would download and some times even get all the way to be installed but the program logo would hang on for ever while installing, and I could not launch the program. If the program installed I would have to remove it before going forward. Their technical support said it was because of the browser as well. I do have IE installed but I never use it as my browser unless I have no choice. Today, my ISP rep called to solve my issue and at her request opened IE as I could go no-where with Firefox. I was right, my ISP is full of it as she could not solve my problem with or without IE. However, I left IE opened and downloaded the other program which it is now working great. Will I have to be forced to use IE so that speed and downloading improves? I hope not.

    I can give a few tips.
    # Update all your add ons and extensions
    # [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    # [https://addons.mozilla.org/en-US/firefox/addon/yslow/ YSlow add on]
    about:config tweaks
    network.http.max-connections = 64
    network.http.max-connections-per-server=21
    network.http.max-persistent-connections-per-server=12
    network.http.pipelining = true -
    network.http.proxy.pipelining = true -

  • Email issue with password change

    I recently had to change my email password.  Now I can't get mail on my IPad.  When I go to settings under mail, contacts, calendars, it is not highlighted and will not let me open it.  I have the same issue with messages and facetime not being highlighted.  My email works fine on all other devices, including my iphone.

    Do you currently have Settings > General > Restrictions > Accounts (under the 'allow changes' heading) set to 'Don't Allow Changes' ? If you do then change it to 'Allow Changes'

  • Provisioning issues with password changes

    I have installed and configured IDM7.1+sp3 with our AS Java portal. Most features seems to work OK, except:
    1.1. Changing fullname, display name, address, etc work - but salutation or title info doesn't display correctly (only when language independant).
    1.2. Can lock the user - but not unlock.
    1.3. Can change password (self service or via Management tab) - but password "disappears" and user can't login again via the UI or directly thru the LogonGUI.
    1.4. If the user's password expires, he gets prompted to change it - this change works fine.
    After "devouring" all the documentation I could fine... I read in the Release Notes the following:
    2.1. Users are authenticated by the SAP NetWeaver AS Java (and not by the Identity Center). The password policy of the Identity Center is not used.
          = enabling or disabling "password provisioning" in the Password Policy tab makes no difference then?
    2.2 The login task does no longer exist since the authentication is done by the SAP NetWeaver AS Java (UME).
          = ok I get this part...
    2.3 Change of password is handled by SAP NetWeaver AS Java (UME) and the change password task is no longer available.
          = so the Password Reset tab is also "pointless"?
    2.4 A user's MSKEYVALUE is used as the UME logon ID.
          = right
    2.5 Password reset is handled by SAP NetWeaver AS Java. See SAP NetWeaver Identity Management Identity Center Implementation Guide u2013 Self-service password reset for details
          = (what should I do with this?) I did get this working but stopped with some error about the "encrypt password".
    My SAP landscape is pretty standard (no custom fields/attributes) - so the IDM Provisioning framework should work "out of the box" - in my understanding...
    Any ideas?
    Sorry about the multiple postings - issue with proxy server. Pls ignore/remove the extras.

    Hi.
    I try to give some answers based on my experience below:
    1.1. Changing fullname, display name, address, etc work - but salutation or title info doesn't display correctly (only when language independant).
    >> Have you checked that the user has correct language set in Java UME? Also check that in Presentation page of the corresponding Attribute the Display name parameter is set with corresponding languages used.
    1.2. Can lock the user - but not unlock.
    >> Can you see any errors e.g. in Job Log? Would help to solve the issue
    1.3. Can change password (self service or via Management tab) - but password "disappears" and user can't login again via the UI or directly thru the LogonGUI.
    >> The reason might be the encryption of the password. Typically the UI should take care of the encrypting the password into MX_ENCRYPTED_PASSWORD attribute, especially when you're implementing tasks like Self Service Password Reset. I've noticed that when I disabled the Enable Password Provisioning option for the Identity Store, I got rid of the error regarding attribute MX_ENCRYPTED_PASSWORD and UI automatic encryption started to work. (In my case two way pwd provisioning is not needed) Otherwise if you have issues with encrypted password in your custom tasks, check whether the value is encrypted and use java script to encrypt the password when reading the value form the UI field and saving it to MX_ENCRYPTED_PASSWORD attribute, if applicable.
    Hopefully this helps you even a bit.
    Br. Jukka

  • Are there any known issues with speed between excel 2003 and 2010 when using WAAS?

    Request asked by customer. Thought I would run this by the forum first.
    Can you please raise a ticket with Cisco TAC asking why Excel files in 97-2003 file format cannot be fully optimized when compared to the same file being saved in the latest file format?
    When using the latest file format, the user experience is amazing and up to 100x faster to open and save files. Our testing has identified an issue with the older file format.

    I deployed WAAS about 3 years ago. Part of the deployment was before and after testing. When the users used Office 2010 the results were good. When they used Office 2003 the results were terrible. Some files took minutes to open, some never opened. Solution was to upgrade to O2010.
    Hope this helps.

Maybe you are looking for