Issues with syncing my Outlook 2013 with icloud 4.0

I am running Windows 8.1, Outlook 2013 and iCloud control panel 4.0. When trying to sync my calendar and contacts I get an error message "Apple Outlook DAV Config has stopped working". Windows looks for a correction, doesn't find anything and closes the program. I've tried uninstalling and reinstalling iCloud. Always get the same error.

Hello Zbolt,
Security software on your system may be preventing this component from operating normally. The article linked below details the location of each component (including AppleOutlookDavConfig.exe) so that they may be added as an exception in your security software's configuration to allow them to run unimpeded.
iCloud: Making sure that iCloud works with security software in Windows
http://support.apple.com/kb/TS4175
Cheers,
Allen

Similar Messages

  • How can i sync my outlook 2013 with icloud calander, how can i sync my outlook 2013 with icloud calander

    Hello!!
    I am just trying to sync my icloud calandar and Outlook mail etc. All is good on my phone however when i install icloud on the PC all seems fine untill go to sync the contacts, calendars and tasks with Outlook ....it says the icloud controll panel did not install properly. I have tried "repairing"it in the programmes and features, restarting computer etc, but just going in circles ...any advice here?? I read somewhere that icloud does not support Outlook 2013 ..if this is true then any ways around this??
    Thanks in advance for any guidance

    It does support Outlook 2013.  Go through the troubleshooting steps in this article under "Troubleshooting on Microsoft Windows (Microsoft Outlook)":  http://support.apple.com/kb/TS3999, particularly the section on ensuring the the iCloud Outlook add-in is active within Outlook.

  • I am trying to use sync outlook 2013 with icloud and am receiving this error - Setup can't continue because Outlook isn't configured to have a default profile.  Check your Outlook settings and try again - can anyone help me out

    i am trying to sync outlook 2013 with icloud and am receiving this error - Setup can't continue because Outlook isn't configured to have a default profile.  Check your Outlook settings and try again - can anyone help me out

    Here are two threads you may want to review. I'm sure there are others. Good luck!
    https://discussions.apple.com/thread/3427840?start=0&tstart=0
    http://www.slipstick.com/outlook/icloud-outlook-problems-syncing-calendar/

  • Outlook 2013 with Office 365 and Google Apps Sync.

    This is the scenario, hopefully somebody can give me some insight on how to resolve this.
    Outlook 2013 with gapps. Both updated.
    Outlook profile with an office 365 email account (which is as an exchange account) and google apps with our main account.
    We installed an office 365 account since its the only way that several users can share and edit the same contacts on Outlook. They use almost all contact fields. 
    Gapps its the main email address and calendar. Shared calendars are deeply used too.
    The problem is that when I edit a contact (the exchange account) I get an error -when- I edit the email field. 
    "The operation failed. The messaging interfaces returned an unknown error."
    If I make a new Outlook profile with the exchange account and the gapps account via imap setup I get not errors BUT I loose calendars sync.
    So I went back to the main profile and thought. <maybe both contacts engines are screwing Outlook.> So, since I don't care about gapps contacts anymore I disabled via:
    Disable sync for individual products
    https://support.google.com/a/answer/1041455?hl=en
    And also disabled the dynamic Global Address (just in case).
    But the same happens.
    I tried with another box, with office 2010, updated it and made a new profile with the office 365 and gapps and the same history.
    Finally I though about setting the office 365 account as imap but contacts are not downloaded. 
    So I'm between a rock and a hard place here. 
    I need to use office 365 account in the same profile as gapps account. 

    Hi,
    What’s the file size of your Outlook data file? If your data file is over size, it may cause data file corruption.
    Outlook data file corruption may cause this problem. Please try to run a repair of your Outlook data files to check the result:
    http://support.microsoft.com/kb/272227/en-us
    Note: You may need to run Scanpst.exe for several times until there is no error.
    In addition, here is a thread discussed a similar issue, please take a look at it and check if it helps:
    http://answers.microsoft.com/en-us/office/forum/office_2010-outlook/office-2010-the-operation-failed-the-messaging/bdd2d604-e652-4fe5-96a3-038191f55d3c?page=1
    Best Regards,
    Steve Fan
    TechNet Community Support

  • TS3999 how can I stop syncing my outlook calendar with icloud and not loose the existing calandar data in outlook?  the calendar data which downloads to outlook, was also wiped off the gmail calendar after the icloud sync , how can I restore the data to g

    How can I stop syncing my outlook calendar with iCloud and not lose the existing calendar data in outlook?  The calendar data which downloads to Outlook was also wiped off the Gmail calendar after the iCloud sync, how can I restore the data to Gmail?

    same issue, looks like nobody answered you from last JULY....

  • TS3999 I am unable to sync my Outlook calendar with my Iphone. I have noted that the Icloud Outlook add in is not ticked When I attempt to load it from the designated file nothing happens Can anyone help with this? Robyn

    I am unable to sync my Outlook calendar with my Iphone. I have noted that the Icloud Outlook add in is not ticked When I attempt to load it from the designated file nothing happens Can anyone help with this? Robyn

    Re: check that the appointments in my phone are going into iCloud calendars....exactly how do I do this?  I fear this is a really stupid question!
    My iCloud account is set up with my Apple ID as one email account (for example [email protected]) which is the email account I use to sign up for internet sites like Amazon, Apple,etc, so that I can differentiate vendors/mass emails.  But my default calendar on my iPhone is in a different email name (ie [email protected]) which I use for most communications to friends, relatives, etc. and it is this account that holds most of my appointments.  To further complicate things I have other email accounts that I use for business/professional and community work.  If I want all my calendars to show on my iPhone AND sync to my iCloud, do I set this at the phone level or the iCloud level?  or both?   
    Let me clarify....It looks like if I go into appointments that I previously set up through my personal account (ie above [email protected]) and edit the entry on my iPhone, selecting the iCloud "home" calendar within the entry, it will then sync to my iCloud account, no problem....do I have to do this to EVERY entry I have? or is there  a way to name my personal account as one to sync to iCloud?

  • Issues with sync between Outlook and iphone 4S.

    Since the upgrade to the operating system and itunes, I have not been able to sync my outlook calendar with my iphone.  Any suggestions?

    There is no selection for one way vs. two way. Sync is sync... that is to say, it is 2 way by nature.  What is it you can't do that you want to? If you have multiple Address books, e.g. One in an address book on the computer and one in iCloud, if you make entries in the iCloud address book, they do not sync to the computer. That would require you install the iCloud control panel for Windows and sync them to your computer that way rather than from the phone.

  • Outlook 2013 with Dynamics 2013 CRM Plugin extremely slow

    I have recently upgraded my Dynamics CRM server from 2013 to 2013 SP1
    All of my user machines (VDI) have office 2013 with the Dynamics CRM 2011 plugin installed (I previous had Dynamics CRM 2011 on a seperate server, but 2013 was released before we set it up and so I removed the old 2011 server).
    The website has a GlobalSign SSL against it and runs fine internally and externally. I also have a terminal server running Server 2012 with Outlook 2013 and the Dynamics CRM 2011 plugin and this also runs fine.
    My machine was running fine but I decided to upgrade the Outlook plugin to 2013 and that's where my problems started. I removed the 2011 plugin (and even followed the detailed guide on how to completely remove it) and then installed the 2013 plugin.
    It installed fine but when I use it, it is ridiculously slow. For example, I highlight an email and then click "Track" in the tool bar. What should happen is the little icon of the blue/green people should appear next to it and then the options for
    "Convert To" text should be available, but they are not. The button at the top changed to read "Untrack" but that's it, making it completely unusable. If I go an make a tea, and then come back and then go an make another tea, sometimes
    it will have updated by the time i get back, but generally it does not. I can close and re-open outlook and still the icon does not display next to the email. Interestingly although the button at the top reads "Untrack" which indicates that it is
    being tracked, the pane at the bottom reads "This email is not being tracked in CRM".
    Now, if I logon to the terminal (RDS) server (that I mentioned above) everything works fine and Outlook updates immediately, all the machines are on the same VLAN and so I should be able to rule out firwall issues (that terminal server is still running the
    2011 plugin) so that would indicate that this is a problem with my machine. I created a fresh machine and installed that same applications and the same problem was had, so that now indicated that its a problem with the plugin perhaps or something very specific
    to my setup.
    I had tried to download and install SP1 for Dynamics CRM 2013 for Outlook but on 2 separate machines I received the same error when installing
    The log for my attempt last night shows:
    23:11:44| Info| Refreshing previous hotfix ARP entries
    23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2466084_Client_1033
    23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2466086_Client_1033
    23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2547347_Client_1033
    23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2556167_Client_1033
    23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2567454_Client_1033
    23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2600643_Client_1033
    23:11:44| Info| Retrieving current hotfix ARP entries for 0c524d20-1409-0060-8a9e-0c4c490e4e54
    23:11:44| Info| Retrieving entry KB2466084_Client_1033
    23:11:44| Info| Retrieving entry KB2466086_Client_1033
    23:11:44| Info| Retrieving entry KB2547347_Client_1033
    23:11:44| Info| Retrieving entry KB2556167_Client_1033
    23:11:44| Info| Retrieving entry KB2567454_Client_1033
    23:11:44| Info| Retrieving entry KB2600643_Client_1033
    23:11:44| Info| Retrieving entry KB2888948_Client_1033
    23:11:44| Info| value 'RegistryLocation': ''
    23:11:44| Info| value 'HelpLink': 'http://support.microsoft.com/kb/2888948'
    23:11:44| Info| value 'ParentKeyName': 'Microsoft Dynamics CRM 2013 for Microsoft Office Outlook'
    23:11:44| Info| value 'UninstallString': 'C:\Windows\\$CrmUninstallKB2888948_Client_1033$\CrmUpdateWrapper.exe /uninstall'
    23:11:44| Info| value 'NoRemove': '0'
    23:11:44| Info| value 'ParentDisplayName': 'Microsoft Dynamics CRM 2013 for Microsoft Office Outlook'
    23:11:44| Info| value 'NoRepair': '1'
    23:11:44| Info| value 'DisplayVersion': '6.0.0000.0809'
    23:11:44| Info| value 'Publisher': 'Microsoft Corporation'
    23:11:44| Info| value 'DisplayName': 'Service Pack 1 for Microsoft Dynamics CRM for Outlook (KB2888948)'
    23:11:44| Info| value 'NoModify': '1'
    23:11:44| Info| Retrieving entry KB2941390_Client_1033
    23:11:44| Info| value 'HelpLink': 'http://support.microsoft.com/kb/2941390'
    23:11:44| Info| value 'UninstallString': 'C:\Windows\\$CrmUninstallKB2941390_Client_1033$\CrmUpdateWrapper.exe /uninstall'
    23:11:44| Info| value 'DisplayName': 'Service Pack 1 for Microsoft Dynamics CRM for Outlook (KB2941390)'
    23:11:44| Info| value 'NoRemove': '0'
    23:11:44| Info| value 'NoRepair': '1'
    23:11:44| Info| value 'RegistryLocation': ''
    23:11:44| Info| value 'NoModify': '1'
    23:11:44| Info| value 'ParentDisplayName': 'Microsoft Dynamics CRM 2013 for Microsoft Office Outlook'
    23:11:44| Info| value 'DisplayVersion': '6.1.0000.0581'
    23:11:44| Info| value 'Publisher': 'Microsoft Corporation'
    23:11:44| Info| value 'ParentKeyName': 'Microsoft Dynamics CRM 2013 for Microsoft Office Outlook'
    23:11:44| Error| System.Exception: Action Microsoft.Crm.UpdateWrapper.MspInstallAction failed. ---> System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
    at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
    at Microsoft.Crm.Setup.Update.HotFixArpEntryHandler.<>c__DisplayClass7.<RemoveSupercededEntries>b__5(ArpEntryDescriptor entry)
    at System.Linq.Enumerable.WhereListIterator`1.MoveNext()
    at Microsoft.Crm.Setup.Update.HotFixArpEntryHandler.RemoveSupercededEntries(IEnumerable`1 arpEntries, Version minimumVersionToKeep)
    at Microsoft.Crm.UpdateWrapper.MspInstallAction.Do(IDictionary parameters)
    at Microsoft.Crm.Setup.Shared.CrmAction.ExecuteAction(CrmAction action, IDictionary parameters, Boolean undo)
    --- End of inner exception stack trace ---, Error, RetryCancel, Option1
    23:11:50| Info| InputResult: Cancel
    23:11:50| Info| CrmAction execution time; MspInstallAction; 00:01:12.9310905
    23:11:50| Error| Install exception.System.Exception: Action Microsoft.Crm.UpdateWrapper.MspInstallAction failed. ---> System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
    at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
    at Microsoft.Crm.Setup.Update.HotFixArpEntryHandler.<>c__DisplayClass7.<RemoveSupercededEntries>b__5(ArpEntryDescriptor entry)
    at System.Linq.Enumerable.WhereListIterator`1.MoveNext()
    at Microsoft.Crm.Setup.Update.HotFixArpEntryHandler.RemoveSupercededEntries(IEnumerable`1 arpEntries, Version minimumVersionToKeep)
    at Microsoft.Crm.UpdateWrapper.MspInstallAction.Do(IDictionary parameters)
    at Microsoft.Crm.Setup.Shared.CrmAction.ExecuteAction(CrmAction action, IDictionary parameters, Boolean undo)
    --- End of inner exception stack trace ---
    at Microsoft.Crm.Setup.Shared.CrmAction.ExecuteAction(CrmAction action, IDictionary parameters, Boolean undo)
    at Microsoft.Crm.UpdateWrapper.HotfixMspInstaller.Install()
    at Microsoft.Crm.Setup.Shared.ComposedInstaller.InvokeInstall(Installer installer, IDictionary stateSaver)
    at Microsoft.Crm.Setup.Shared.ComposedInstaller.InternalInstall(IDictionary stateSaver)
    at Microsoft.Crm.Setup.Shared.ComposedInstaller.Install(IDictionary stateSaver)
    at Microsoft.Crm.UpdateWrapper.UpdateSetup.Install(IDictionary data)
    at Microsoft.Crm.Setup.Shared.SetupBase.ExecuteOperation()
    23:11:50|Verbose| Method exit: Microsoft.Crm.UpdateWrapper.UpdateSetup.ExecuteOperation
    23:11:50| Info| failed.
    23:11:50| Info| Setup did not complete successfully.
    Action Microsoft.Crm.UpdateWrapper.MspInstallAction failed.
    The given key was not present in the dictionary.
    23:11:50| Error| Setup did not complete successfully.
    23:11:50|Verbose| Method exit: Microsoft.Crm.UpdateWrapper.UpdateSetup.RunInternal
    23:11:50|Verbose| Update Not Completed
    23:11:50|Verbose| Update Not Completed
    23:11:50| Info| Service Pack 1 for Microsoft Dynamics CRM for Outlook (KB2941390) was not completed successfully because of the following problems:
    Action Microsoft.Crm.UpdateWrapper.MspInstallAction failed.
    The given key was not present in the dictionary.
    23:11:50| Info| ActivatePage(HotfixFinishPage)
    I also tried manually installing Rollup 2 before installing SP1 but I still get the same error.
    Now I'm not sure if the Outlook plugin update is going to fix the problem, so as it stands I have 2 problems:
    Very very slow Outlook CRM Plugin when updating emails and icons
    Cannot install 2013 CRM SP1 for Outlook
    So, I'm stumped, and this is really holding me back. I will post any updates here, but if anyone has any ideas, please let me know.

    I have Outlook 2013 with the CRM 2013 Outlook client and it was running fine until about a week ago.  I ran windows update and suddenly everything stopped working. I am going to try to uninstall all the updates until I determine which one is the cause
    of the problem.  It would be nice if MS tested before releasing updates...
    Ken Compter

  • Outlook 2013 with Exchange Server - Changed custom form for contacts is not shown

    Hello,
    Our infrastructure:
    Exchange Server 2010
    Outlook 2010
    Outlook 2013
    Windows 7 Pro, Windows 8 Pro and Windows 8.1 Pro
    The situation:
    We've used an old custom form for contacts, worked perfectly fine
    I've updated the form (adding some new custom fields and checkboxes) using Outlook 2013 and publishing the form (with a new name) to the Exchange folder
    I've set the form as default form in our contacts folder
    I've used this Script to set the new form for the existing contacts  and the name of the new form is saved correctly
    BUT if I open a contact in our Exchange contacts folder, Outlook 2013 (Outlook 2010) still shows the old form
    Steps I've taken so far:
    Cleared Outlook forms cache
    Repeated the above steps 1-4 in Outlook 2010
    Switched Cached Exchange Mode off and back on
    Allowed Scripts in Trust Center Settings
    Used a new clean Windows installation with a new Outlook 2013 installation
    Used different Exchange users on different systems, but some behavior when opening contacts
    I'm out of options I can think of, so maybe somebody else has some new view on this problem. 
    Thank you very much in advance!
    Greetings,
    Karl

    Hi,
    Is the Exchange folder in which the custom form is published available to all users?
    From the description, the script used to work for the old custom form, correct? Which version of Outlook did you use with the old custom contact form? Outlook 2010/Outlook 2013 or an earlier version? If you used the script with an earlier version of Outlook,
    we can't make sure it will still work with Outlook 2010/Outlook 2013.
    In addition we may also try creating a new contact form and test the steps to see if it will work.
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • ITunes 10.5 will not sync to my BlackBerry. I sync's outlook fine with desk top manager, but when I select music DM says connect device. It also tells me to install iTunes!?!? Running XP Pro w/SR3 and BBerry Tourch 9810.

    iTunes 10.5 will not sync to my BlackBerry. I sync's outlook fine with desk top manager, but when I select music DM says connect device. It also tells me to install iTunes!?!? Running XP Pro w/SR3 and BBerry Tourch 9810.

    LowerFilters: AFS2K (3.1.21.0), PXHELP20 (2.0.0.0), IVIASPI (1.0.0.0), CDR4_XP (8.0.0.212),
    UpperFilters: Cdralw2k (8.0.0.212), GEARAspiWDM (2.0.6.1),
    hmmmm. you've got rather a lot of burning software entries in there. (it looks like you've got some kind of Roxio product installed, as well as itunes and Alcohol 120%.)
    by way of experiment, try the technique described in the following document (remember to take a backup of your device filter registry keys first).
    iTunes for Windows: Troubleshooting CD issues caused by device filters
    do you still get the itunes message with just the iTunes filters in place?

  • ITunes does not sync my Outlook calendar with my iPhone calendar

    Problem: iTunes does not sync my Outlook calendar with my iPhone calendar.
    Background: The sync was fine until I got the Lenovo 64 bit with Windows 7. I have tried to follow lots of Q/As.
    Dear iTunes / Apple, This must be solved within iTunes, I believe.
    - Windows 7 Prof, vers 6.1, SP 1, 64 bit
    - iTunes: 11.1.3.8
    - iPhone: 3GS, 32GB, iOS 6.1.3
    - Computer: Lenovo X301, 64 bit
    - Processor: Intel Core 2 Duo 2 CPU U9400 @ 1.4 GHz.
    Sincerely
    Soren

    Hi there nocomano!
    I have an article here that can help you troubleshoot this issue:
    iPhone, iPad, iPod touch: Troubleshooting contact and calendar syncing via USB on Windows
    http://support.apple.com/kb/ht1692
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • HT1386 how do i sync my outlook calendar with my ipad?

    I can sync my outlook contacts with no problem but my calendar does not sync

    Hi there lindam899!
    I have an article here for you that can help you troubleshoot this particular issue:
    iPhone, iPad, iPod touch: Troubleshooting contact and calendar syncing via USB on Windows
    http://support.apple.com/kb/ht1692
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • HT1386 how do I sync my outlook calendar with my ipod touch

    how do I sync my outlook calendar with my ipod touch

    Syncing contacts and calendars to iPod with iTunes for Windows
    iTunes 10 for Mac: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Troubleshooting contact and calendar syncing via USB on Windows
    IOS 6 sync exchange calendar issue: Apple Support Communities
    iTunes 11 for Windows: Sync contacts, calendars, and other info with iPod, iPhone, or iPad

  • Outlook 2013 with Exchange 2010

    we upgraded from Outlook 2010 to 2013 x64it and the exchange server is the same 2010
    when trying to cleanup public folders the Clean Up tool is grayed our and it says "outlook 2013 this feature is not available because you are running in online mode and connected to microsoft exchange server 2007 or earlier" none of this is true.
    It works fine when you are in your own inbox, only grays out in Public folders, this worked fine with Outlook 2010
    David

    Hi David,
    Sorry for the late reply.
    Since Outlook 2010 works well, just Outlook 2013 has this issue, I still believe this issue related to the Outlook 2013 Client side.
    I suggest also create a thread on Outlook Forum so that we can get more professional suggestions.
    For your convenience:
    https://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
    If this issue really related to the Exchange 2010 server side, I suggest re-setting the default public folder database for testing.
    Please make a back up for the current setting in case of some crash. If it doesn't work, please back to the current setting.
    Then please follow following article to change the default public folder database:
    Change the Default Public Folder Database for a Mailbox Database
    http://technet.microsoft.com/en-us/library/bb629522.aspx
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Outlook 2013 with Exchange 2007 - out of office problem

    We are using outlook 2013 with Exchange 2007. When users select their out of office it will work fine for the first day, however there after the Out of Office replies stop working. Out of Office is set correctly within Outlook, but what we have found
    is that if the user opens Outlook the Out of Office starts to work again. Also when the user opens Outlook it takes around two minutes before it registers that Out of Office is on.
    Any Ideas?

    Hi,
    How do you configure your OOF? From standard OOF wizard or define an automatic reply template from Rule wizard?
    If you are using a template, Outlook must be running for the Rules Wizard to automatically reply. Please refer to the Note in the following KB:
    http://support.microsoft.com/kb/311107
    If it is configured by using standard Out of Office assistance in File > Automatic Replies, please remove OOF settings in Outlook and set it from OWA 2007, then check whether the issue can be reproduced.
    Regards,
    Winnie Liang
    TechNet Community Support

Maybe you are looking for

  • What does this mean... can someone please help me

    Recently I tried to clean up my iMac (Safari) I saw  step by step instructions on Pintrest on how to delete my trashed stuff... after a couple of hours of my PC creating a temp file for all the stuff to be deleted I received the following msg.... I h

  • I have problem with AE2420 3D VGA

    i have this problem before and contact support send driver for me and it was good but now i losse the driver witch give after format the problem jama color or like that see pic https://www.dropbox.com/s/nzrug3fqtdfcqxs/20150325_173316.jpg?dl=0 https:

  • Scrolling only flash Scroll bar not a browser

    When i scroll the scrollBar in Flash the browser is scrolling too. What i need is to stop scrolling the browser and scroll only the flash box. And the Browser have to scroll only then when the flash scrollbar is in end. Is there a solution  for that?

  • Develop a reader plugin

    Hi I am a dev (not a co.) & want to develop plugin for Adobe Reader, I'd like to know licencing policy for developng a plugin for reader. Would request your replies/suggestion at the earliest ?

  • Why do I have to keep installing adobe flash 11 player in my computer?

    I have installed adobe flash player 11 various versions many times in my Windows 7 64-bit computer. It seems like once a week I'm having to do this. Why do you have to install the same version so many times?