Issues with the latest IOS 7.0.4 upgrade, iPad shut down!!

I updated the ipad on saturday, with latest software, but since update i cant turn on the ipad. Is their anything i can do, like uninstalling the new upgrade. I could restore, but not sure if i have icloud sorted to ensure i dont loose all my photos!! Help!!

You are in Recovery Mode. Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

Similar Messages

  • With the latest IOS 7.0.3 for my iPhone, it no longer syncs with iTunes. I've run the diagnostics for syncing and it says everything is working, which it clearly isn't. Is there anything to be done without restoring iPhone? Thanks

    with the latest IOS 7.0.3 for my iPhone, it no longer syncs with iTunes. I've run the diagnostics for syncing and it says everything is working, which it clearly isn't. Is there anything to be done without restoring iPhone? Thanks

    update : so after reading numerous posts, I tried unchecking entire playlist and just tried one of my playlists. That sync seemed to work, so I rechecked entire playlist and did the sync. It worked. Then I went in to my "walk to work" playlist and added some songs to see if it would sync now, and it did!!! so happy now. will see what happens tomorrow.

  • Are there any known issues with the latest update to iTunes on Windows 7 maxing out the processor and nearly bringing the system to a hault.

    Has anyone experienced an issue with the latest update to iTunes (11.2.0.115) for Windows where iTunes pegs out the processor at 97%, 98%, and holds there for maybe 15 minutes before dropping to 50%. During that time, the system is basically useless. You just have to ride it out. I'm running Windows 7 Home Premium.

    Hi OnceBeforeIDie,
    Welcome to Apple Support Communities!
    Take a look at the article below, it has some some tips that will resolve a performance issues like the one you described.
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/ts4123
    -Jason

  • How can i get my logic3 istation (ip106) to charge my ipod 4gen with the latest iOS?

    how can i get my logic3 istation (ip106) to charge my ipod 4gen with the latest iOS? i had recently bought it for my ipod to play and charge my ipod

    Is it compatible with iOS 5.0.1? Some users have reported that after updating to iOS 5/5.0.1 their dock no longer worked.
    Have you contacted the manufactuer?

  • Why does FF save files to desktop, when I have "downloads" checked in options? This is a new issue with the latest version 3.6.3 Windows XP Thanks.

    Why does FF save files to desktop, when I have "downloads" checked in options? This is a new issue with the latest version 3.6.3 . Using Windows XP Driving me nuttier! Thanks.
    (Is is that MicroNetFrame Asst thing?)
    == This happened ==
    Every time Firefox opened
    == When I installed latest version

    Thanks for your reply. I appreciate your help.
    It was just a hunch that MircoNetFrame was causing the problem. I disabled it as you suggested, and I still have the problem.
    I just changed under Tools>Options> General - had checked "ask me every time" under downloads, so instead of asking me, FF saved the download to I know not where. It no longer saves it to the desktop, leaving a duplicate in "my documents".
    In windows, I have found unless one knows the entire name of the document, one can never find anything. It isn't listed under recent ''''''__. I can't recall the nomenclature, but the
    capability is ridiculous. So, I don't know where that file I just downloaded is!
    I downloaded a PDF file, but this happens with all DL's. It was so easy to have them all stacked in one place and I could recall
    what I had and when I downloaded it easily.
    Do you have any other suggestions other that going back to the old version of FF, which I would rather not do?
    Thanks again for your time, it is very considerate to help a complete stranger, I must say. Sounds like something I might do! Cheers!

  • HT6147 With the latest iOS 7 update (Feb 2014) is anyone else experiencing trouble with the App Store not able even to load updates for existing apps, and unable to download new apps?

    With the latest iOS 7 update (Feb 2014) is anyone else experiencing trouble with the App Store not able even to load updates for existing apps, and unable to download new apps?

    With the latest iOS 7 update (Feb 2014) is anyone else experiencing trouble with the App Store not able even to load updates for existing apps, and unable to download new apps?

  • I updates my iPad with the latest iOS and despite backing up all the information prior, my iBooks application was deleted along with a hundred important PDFs on it. Is it possible to locate these missing files? Urgently requires assistance. Thank you!

    I updated my iPad with the latest iOS and despite backing up all the information prior via iTunes, my iBooks application was deleted along with a hundred important PDFs on it. Is it possible to locate these missing files? Urgently require assistance. Thank you!

    Hi Sam,
    I understand where you are about being your own IT department, it can be overwhelming ...
    What drives to buy depends an awful lot on how you will use them, what your budget is, and your preferences.
    In the case of your DP Powermac, for online storage used primarily for editing, I would add one or more internal drives first. Look for drives that are at least 7200rpm and have at least an 8MB cache. 10,000rpm/16MB cache is even better, but more expensive. Seagate Barracudas have always been good choices.
    For backup purposes, I'd pick some good external FireWire drives; you can also use these for online editing, lots of people do. Your Mac has both FW400 and FW800 ports - either kind is fine but if you get drives that support both, you would want to connect them to the FW800 port for the added performance.
    In my experience, the Lacie d2 Extreme drives have been very very good. In fact I have 3 of them daisy-chained off my iMac G5 right now and they work flawlessly with FCE. Weibetech and Granite Digital drives are further upscale in performance and price. RAID configurations would be even further upscale. Do stay away from consumer level hard drives, however ... the Western Digital MyBook series & no-name drives come to mind ...
    Don't use a FireWire hub for your external drives, it's just asking for trouble.
    ps. And thanks for your nice comment about me. I'm happy to help, as are other folk in the forum.

  • Every time I connect my iPhone to iTunes on my mac it alwasys says iPhone can not sync because sync session failed to start. What do I do to fix this problem?(It's an iPhone 4s with the latest IOS 7.0.2

    Every time I connect my iPhone to iTunes on my mac it alwasys says iPhone can not sync because sync session failed to start. What do I do to fix this problem?(It's an iPhone 4s with the latest IOS 7.0.2

    bubblesblom wrote:
    Okay, so my friends think it is funny to change the passcode on my iPhone.
    Maybe you should get new friends.
    I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
    If you can't update or restore your iOS device - Apple Support
    If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
    iCloud: Erase your device - Apple Support
    This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone.

  • HT4623 I cannot import my photos to my Windows xp PC after updating my iphone 5 with the latest iOS 7.1

    I cannot import my photos to my Windows xp PC after updating my iphone 5 with the latest iOS 7.1

    According to the iTunes download page, it still supports Windows XP.
    Windows System Requirements
    PC with a 1GHz Intel or AMD processor and 512MB of RAM
    Windows XP Service Pack 3 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
    64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    (Emphasis added)
    If your XP computer was updated, then it should work. Again, the links I posted earlier contain the current USB drivers for the iPhone and Windows.

  • Does anyone know if the Apple HDMI adaptor can play iTunes purchased movies with the latest IOS

    Does anyone know if the Apple HDMI adaptor can play iTunes purchased movies with the latest IOS. I only want to play my downloaded movie on a TV where there is no internet for Apple to unlock it and play via my AppleTV. The reviews I am reading are very mixed !

    Does anyone know if the Apple HDMI adaptor can play iTunes purchased movies with the latest IOS. I only want to play my downloaded movie on a TV where there is no internet for Apple to unlock it and play via my AppleTV. The reviews I am reading are very mixed !

  • How do I download only selected audiobooks from iTunes to my iPod.? I don't want to download the whole library..i have an iPod classic and Mac laptop with the latest ios.

    How do I download only selected audiobooks from iTunes to my iPod.? I don't want to download the whole library..i have an iPod classic and Mac laptop with the latest ios.

    If you check songs, simply sync the entire library.
    But I highly recommend (and it is far simpler) to create a playlist (or multiple playlists) and select only that playlist to sync.
    Leave everything checked.
    Then simply add/remove from these playlists and sync away.

  • After the latest iOS 5.0.1 upgrade I can't receive sms (only iMessage)

    After the latest iOS 5.0.1 upgrade on my iPhone 4s (carrier is AT&T) I can't receive sms. I can send messages, I assume they are all going through iMessage, but unless someone is using iMessage, I dont' receive a reply.  I spent 2 hours on the phone with AT&T and they said its an issue with the latest patch and that apple is working on it.  Here is what we did:
    1. Soft reset
    2. Reset network connection
    3. Deleted all messages and closed Messages app
    4. Reactivated the phone
    5. AT&T checked all the settings on their end
    6. Restored the phone to factory settings and restored from back-up
    Is anyone else having this problem?  And more importantly has anyone been able to fix it?  And if so, how?

    Try this... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    http://support.apple.com/kb/ht1430

  • Recommendations on deploying multiple iPad's with the latest iOS

    We recently purchased 25 iPad 2's. I am looking for recommendations on the best way to activate and update the iPad's before deploying them to users. Here is what I've come up with so far.
    1) Activate iPad using iTunes activation-only mode
    2) Connect activated iPad to iTunes in regular mode
    3) Click Register Later and accept the default prompts to associate the iPad with iTunes
    4) Update the iPad to the latest iOS using the latest IPSW file
    5) Repeat steps above on same workstation for each iPad
    We are providing the iPad's to board members who will need to setup the iPad's with their own iTunes accounts. Some board members already have existing iTunes accounts that they will associate with the device, for the others, we will work with them to create iTunes accounts.
    My concerns with the steps above:
    a) Will we be able to perform the above steps for all 25 iPad's or will we encounter license/iTunes restrictions?
    b) Will the steps above prevent the board members from registering the iPad's with their own iTunes accounts and using the iPad's with iTunes on their own workstations?
    c) Any other concerns/issues.
    Thanks.

    Thank you for the feedback Bonesaw. I've revised my steps as follows for anyone else who's interested:
    1) Open iTunes on workstation
    2) Connect iPad to workstation with USB cable
    3) In iTunes, click "Register Later"
    4) Click "Not Now" for Find My iPad registration
    5) Check the box to agree to the license agreement and click Continue
    6) Select the radio button that says "Set up as a new iPad" and click Continue
    7) Name the iPad (e.g. User First/Last Name and S/N)
    8) Uncheck all "automatic" sync options and click Done
    9) Click "Ok" or "No Thanks" for the "send Apple information" prompt
    10) To update the firmware using an offline copy of the firmware file, hold down the Shift key and click the "Update" button
    11) Find the IPSW file specific to the firmware and cell carrier and click Open.
    12) Click Update on the firmware update prompt
    13) After iPad firmware update is complete, disconnect firmware
    14) Repeat steps above

  • Has anyone had issues with the latest i-tunes update 11.1.4 on Windows Vista

    I downloaded the update on 24th Jan, and when I tried to open i-tunes after that it failed to start and the message was MSVCR80.dll and the window suggested that I remove and re-install i-tunes.
    I did this and then my CD/DVD drive was not recognised. I then decided to go for a system restore prior to the update. When I did this i-tunes worked again but a window opens every 30seconds saying 'Mobile device helper is not working'  At one point I had 116 windows open. Has anyone else had this problem or can offer any advice please? I have an i-pod classic and my system is windows vista which is approx 8yrs old. I have never had any problem with i-tunes updates before.

    Try using these directions on this link: http://support.apple.com/kb/HT1926 or http://support.apple.com/kb/HT1923
    This resolved my issue with the new update on Vista.
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)

  • 10.4.11 Has Apple addressed/fixed issues with the latest update to Tiger?

    Like many of you, I installed the 10.4.11 update last weekend with disastrous results. I eventually had to Archive and Install and my machine seems to be recovered. Has anybody had this problem and gone on to try the update a second time with better results ?? Any words of wisdom?? or had some sort of feedback from Apple to indicate they have or are going to resolve the problems with this update.

    +I just posted this on the thread that seemed geared to those who "had success" (many more than half had issues) with the recent update after pi55ing and moaning due to crashing several times while trying to post there. Subsequently I found this thread and a bit of absoultion. I have eliminated the links, thinking them redundant but they are posted to that thread.+
    "If stupidity got us into this mess, then why can't it get us out?" "
    - Will Rogers (1879-1935)
    A little story, when I first tried to install Jaguar on my then Beige (Yeah, remember them!) G3 MT, it took me a full six months to get that "Darn Cat" in that house! Oh, how I sweated and swore, you talk about "legacy", I waved every "dead chicken" that was suggested to no avail. Ended up that before I bought the unit someone had switched out the CD/ROM for one from one year later, still Apple issue, mind you. I sent to OpAmp and got an original and "The Cat" slid in as quick as grease through a goose. That's how tightly wound Apple was and still is in many ways and is why they stopped the clones. This was one of a slew of many little things you had to get used to in "Mac Land".
    One other small thing you used to do a "clean install", you still can, but under OS 9, after you were satisfied (Conflict Catcher made things ever so easy!) all was peachy, you could simply trash your Previous System Folder and get back some valuable disk space. Well not to long after my success with the install of Jaguar and still not understanding OS X at all, I was still working mainly in OS 9, I did a Clean Install on my OS X, horsed around with settings which was difficult without Conflict Catcher and bravely trashed my Prev Sys Folder. Don't ever, EVER do that. What is a seemingly empty shell but for redundant Apps and meaningless abbreviations, is indeed a necessary if gigabyte eating Albatross you are doomed to carry!
    My point with these two parables is that we are creatures of trust and habit, living on borrowed time. We have been blessed with a computer system that is virtually foolproof given certain caveats, caveats if adhered to even marginally would guarantee success. I my self have gotten into some very bad habits of late and think that this may be the cause of my computers malaise.
    Drop to your knees and be grateful you don't have a PC (shudder!)! Yes Virginia, there is an Insanity Clause! I just installed WinXP on an Intel Mac, and after it was over all I wanted was a stiff drink and a shower!
    +There's always something worse than he77, there's always Vista!+
    Message was edited by: fla_cracker

Maybe you are looking for

  • When I save web page on my HDD then when I try to open it the pictures are not displayed?

    I have saved on my hdd webpage and folder with all pictures, but when I try to open it by doubleclick it open onli web page with text but picture stay clear (only borders)

  • Calling a concurrent request from within the trigger

    Oracle apps r12. Calling a concurrent request from within the trigger. Does it requre apps initilization. Thanks, Lavan

  • Startup mount error

    when trying to mount the database for performing flashback gives shutdown immediate SQL> startup mount; ORA-01041: internal error. hostdef extension doesn't exist

  • Audio faults rendering in AME

    For some reason, the audio in a video im currently editing using Adobe After Effects, decides to get messed up when I render it in AME, the fault is around 0:27 the music in the backround sort of repeats itself and it doesn't sound correctly, would i

  • Dvd format error

    I'm trying to burn a dual layer dvd project. The file size is 7.5Gb and the dvd holds 8.5Gb. The entire video is approximately 2:30 minutes. The layer is set to Dual and the Break Point is set to Automatic. Error 1# Formatting Failed. Formatting was