Issues with this website
Is this a Safari issue or a Dice issue, or both?
http://community.dice.com/t5/Customer-Support/Using-Safari-with-this-website/td- p/191198
My post
The font size is WAY WAY too small, and I have had some other issues as well. One of which is when I close the browser window and come back to a thread and hit the reply button, I am taken to some search screen, and have to completely log out and log back in before I can reply. Its very annoying and needs to be done everytime I reply to a post. I have deleted all my cookies, cleared my cache, etc.. I am thinking its a issue with how this website talks with safari but I could be wrong. I could ISOLATE the problem by creating or logging into another Mac account I setup for testing problems, but I am too lazy to do so, as I am thinking this is a Dice + Safari issue because I never had the problems when I used FireFox full time.
John
I bet a donut that the problems I am experiencing have nothing to do with logging in as a admin. I bet its a Dice + Safari issue.
Similar Messages
-
hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!
kaylsk1 wrote:
udated and its on 10.6.8 yet still no change
Your signature in 1st post was 10.8.2.
You went backwards?
Did you reformat and reinstall when you first purchased it?
If not I HIGHLY recommend you do that before you do anything else. -
I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
The HTC hotspot works fine with everything else I connect to it.
Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr........... -
Problem with this Website : FilesFetche
first i have macbook pro 10.7.5,
i use google chrome,
i have problem with this Website :
FilesFetcher,
i can't Surf the Internet Comfortably,
if i open any Website be instead of it,
after few Second,
i need Surf the Internet Comfortably,
- please help me -Are yo seeing ads? The pages you are visiting are loaded with ads?
1. If adware is installed without your knowledge,
use free AdwareMedic by clicking “Download ” from here
http://www.adwaremedic.com/index.php
Install , open, and run it by clicking “Scan for Adware” button to remove adware.
Once adware is removed, quit the app by clicking AdwareMedic in the menubar
and selecting “Quit AdwareMedic”.
Safari
2. Safari > Preferences > Extensions
Turn those off one by one and relaunch Safari again to test. -
There is a problem with this website's security certificate.
There is a problem with this website's security certificate.
Error this morning on xxx.emea.acrobat.comYou attempted to reach admin.emea.acrobat.com, but the server presented an expired certificate. No information is available to indicate whether that certificate has been compromised since its expiry. This means that Google Chrome cannot guarantee that you are communicating with admin.emea.acrobat.com and not an attacker. You should not proceed.
-
EA4500: There is a problem with this website's security certificate.
When I navigate to router's webpage, I get message that "There is a problem with this website's security certificate."
I am using https.
Does this mean that https is not working on the EA4500?
Solved!
Go to Solution.wanderers wrote:
ScarletJamie wrote:
wanderers wrote:
When I navigate to router's webpage, I get message that "There is a problem with this website's security certificate."
I am using https.
Does this mean that https is not working on the EA4500?
This problem occurs if the client computer's clock is set so that the date/time is later than the expiry date of the web server's SSL certificate.
Why would the certificate of a brand new router be expired?
Hello, you can check the link posted by sabretooth. -
Part 2: Flat files and Business Contents: Any issues with this scenario?
I will appreciate some clarification on the some points made in response to my previous post "Flat files and Business Contents: Any issues with this scenario?"
1.
" ...youd better analyze those cubes for data redundancy and presence of data youll never use. " I will appreciate some clarification on the type of analysis you are referring to. Examples will help.
2.
"If you want to combine several found IOs in your custom dataprovider, then again you must know (or figure out) relationships between these IOs." I will appreciate some clarification on the type of relationship you are referring to. Examples will help.
3.
I am a bit confused with "..include into ODS structure ALL fields required for the cube" but you also noted noted that "...except navigational attributes and chars and KFs that are going to be determined in TRs or URs."
If you exclude ALL these, haven't you excluded all the fields you included in the ODS structure?
4.
"Consider carefully the ODS key fields selection. Their combination should not allow data aggregation that you dont need."
I may be missing the point here, I understand that you need to select the fields which will form the unique ID for the records in the ODS under the Key Field (please correct me if I am wrong with the purpose of the Key Field), but I don't understand the discussion of "aggregation" in the context.
Thanks in advanceHallo
I try to give some exaplanation based on the previous answer.
1. Data redundancy - make sure you do not store the same information. does not make sense to have data redundanty across you Data Warehouse. this is also a cost. just sotre the same information one time if you get all what you need.
2. whatwhever you build you dp, which consist of IO, you need to know with kind of relation (1:1 or 1:n - n:n and so on) exist between them. that will help you when you model you infoprovider. For example I would never pit togheter IO (n:m) in the same dimension if you expect an high number of cardinality. Sometime an IO can be an attribute of another one (depend on relation. For example
Business Partner and his Address. Usually you have a relation 1:1, in this case address is an attribute of BParten and store it in the Masterdata instead then DP
3. Sometime when you load from ODS to CUBE, you can fill some IO (which are in the infocube and not in the ODS)through ABAP routine in TR-Start Routine of Update Rule. Does not make sense to include these IO in the ODS as they are NULL or Blank (the deault value). This can happen when for example, you first load in the ODS (Price and Quantity) and then you calculate Sell price later (Price * Quantity). of course it could be doen also in the Bex. Depends on other factors (Performance - Loaidng -Sizing)
4. Make sure that the KEY definition of ODS is accordingly to the data otherwise you will aggregate the data and later maybe if you need the detail you miss it.
for example: customer - product - Distr Chan - Sell Price
if each Customer can buy each product for any Distrution Channel, then when you build your ODS(Customer - Product and Distribution must be KEY) otherwise (if you have only Customer - Product KEY for example) you will lose the details for Distribution Channel.
I hope eveyrhting is clear
Regards
Mike -
Renewed my subscription with the Sun app, was charged £0.69 but app won't load seem that I am not the only one having issue with this app. How can I claim my money back?
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
I am exporting a 2 min video, using a custom compressor setting. I have not had issues with this setting in the past, but recently its taking upwards of 4 hours to process. Any idea what is going on?
Name: Vimeo HD Encode
Description: No description
File Extension: mov
Estimated size: 2.3 GB/hour of source
Audio Encoder
AAC, Stereo (L R), 44.100 kHz
Video Encoder
Width: 1920
Height: 1080
Pixel aspect ratio: Square
Crop: None
Padding: None
Frame rate: (100% of source)
Frame Controls On:
Retiming: (Best) High quality Motion Compensated
Resize Filter: Statistical Prediction
Deinterlace Filter: Best (Motion Compensated)
Adaptive Details: On
Antialias: 0
Detail Level: 0
Field Output: Progressive
Codec Type: H.264
Multi-pass: On, frame reorder: On
Pixel depth: 24
Spatial quality: 75
Min. Spatial quality: 25
Key frame interval: 30
Temporal quality: 50
Min. temporal quality: 25
Average data rate: 5.12 (Mbps)
Compatible with Mac
My video in the timeline is 1920 x 1080 / 23.98 fps
I've installed Toast and photoshop elements recently, i also updated my apps the other day.
I have had this problem before the updates of the apps though -
I would like to buy a developer license to use on a mac at a public library from a flash drive any issue with this? Very new to this
The license is for the Developer not the machine it is run on However there could be soma issues with trying to develop on a public machine.
The biggest is does the library machine have or will they let you install and run Xcode and if you are developing for IOS will they let you plug in your devices?
In addition will they allow you the hours needed on the machine? Most public machines have a time limit especially if there are others waiting to use it.
All-in-all in can be done but it won;t be an easy situation.
good luck -
I0S 7 draft folder in email exchange is gone...anyone else have an issue with thie "upgrade"? Draft folder is essential for my work as I create in draft folder on laptop/desktop and need that information available on the iPad when I travel.
I0S 7 draft folder in email exchange is gone...anyone else have an issue with thie "upgrade"? Draft folder is essential for my work as I create in draft folder on laptop/desktop and need that information available on the iPad when I travel.
-
I have a mac book pro mid 2011 and it overheats is there any known issue with this model
overheating issues
I have a mac book pro mid 2011 and it overheats is there any known issue with this modelAre you gaming or watching videos when the unit heats up? As your core temperatures rise, it's normal for the fans to speed up - but if you're not running any CPU/GPU intensive apps, it's not normal for your MBP to heat up or for the fans to run high. Download the free iStat Pro widget and either record or take a screen shot of your temps and fans speeds. Oh, and your MBP should not heat up just because you're using the power adapter.
Clinton -
ever since firefox updated to version six i am having some issues with games on facebook and also loading several sites. i'm getting a lot of time outs. i would like to go back to firefox 5. please advise
Sorry, Swanarva, It didn't work as it was supposed to. I downloaded, saved file, clicked the download to open, clicked 'run' then got an error message that it couldn't find the file(!) . No idea what happened or why. Should I have uninstalled Firefox first, then downloaded Firefox 8 using another browser or downloaded, uninstalled Firefox 09 beta then tried installing Firefox 8?
At this rate, IE is looking good, despite its shortcomings. -
Issue with viewing website in internet explorer
Hello. I created a website in dreamweaver using rollover images for the links. When I load the webpage in the firefox, google, or opera browsers it loads fine, however when I load it in internet explorer I get an "allow activex" message. When I tried to view it on my tablet in google it loaded fine, but when I tried to load it in my tablet using internet explorer it didn't show any links at all and than it crashed the browser. What can cause this and how can I fix it? is there a better way to create rollover images that I'm not aware of? I tried to use CSS code in the stylesheet to make rollover images, but couldn't figure out how to do that.
Thanks,
Mike IrvanAny server you have access to would work fine, you just upload to a temporary folder, like TEST, then delete it after the problem is found.
However, if you're not online yet, and having issue with IE, it's very likely you just need to drop IE's security settings to allow it to display local file attachments correctly (yeah, don't ask, it's a Microsoft thing).
Go into IE and choose Tools > Internet Options > Security and drop the scrubber bar down a notch or two, restart and try again.
When the site is uploaded to an actual server, that error won't come up because all files are coming from the same remote source (Microsoft, it doesn't have to make sense®)
You can do a search online to get more info on customizing the settings manually, somehting like this page will come up if you search allow blocked local files: IE 10 is blocking javascript on local html files - Microsoft Community -
Issue with embedded website links in emails
Hello all,
First time on this forum and hopefully someone can help me with this issue, which popped up in the last few weeks. Whenever there is a link in the emails that I received, the link is only underlined and highlighted up to about 30 or so characters and when I click on it, it will open another window but the address is only the portion of the link that is highlighted, therefore, it always comes back with an error. I have been getting around this issue but manually highlighting the entire link address in the email and then copy and paste it in a new window to get to the site that I wanted. This is getting annoying and I don't know why it happened suddenly and how to fix it.
Thanks,
Peter LauPeterlau,
Im sorry to hear about you link problem. In order for me to resaerch this for you I need some additional information. Please fill out the secure form http://www22.verizon.com/onecms/verizonsupport?ID=peterlau . Make sure to also include an example of a link you were emailed, how you access your email (website, outlook, etc) , as well .
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan
Maybe you are looking for
-
Premiere Pro CC 2014 - Black flickering lines during playback and when exporting video
I am fairly new to Premiere and have recently started using creative cloud on my new MacBook Pro retina - 2.3 GHz Intel Core i7 - 16GB Memory - OSX Version 10.9.4 I shot a music video using my friends camera and all the shots were absolutely fine, I
-
Changing Video Res. for A Menu
I am running Encore CS5 and am trying to create a video menu with audio. As I have done this many times in the older versions, I have "alt dragged" the file into the new menu however cant figure out how to change the resolution from HD 1920X1080 to 7
-
Can't delete or edit songs..
I like to keep my music organized so this is a pretty big deal, lol. I had some songs from an album on my library, no problems. I just downloaded a song from the same album to my iTunes. However, most of the info is missing. I click 'get info', and i
-
I uninstalled my computers sound and microphone. how do i get it back?
pavilionw g4-1104dx LW233UA#ABA i uninstalled my sound and microphone. how do i get it back?
-
Is there a way to apply the same transition between all clips?
Or is there a way to apply random transitions? Either way I'm too lazy to drag a transition between every clip and hope there's a bulk way I haven't found yet. I'm using iMovie HD 6.0.2 (267). Thanks! --Daniel