Issues with thunderbolt not being detected on initial start up

I understand that when running windows boot camp for your thunderbolt display you have to either reboot or start up for it to be detected. However, I shut my machine down every night and when I come back in the next day and start up, the thunderbolt is never detected. I reinstalled the windows support software and this seemed to fix it but only for a short period. Any suggestions?

kirstyfiona wrote:
I understand that when running windows boot camp for your thunderbolt display you have to either reboot or start up for it to be detected.
It should not be necessary for plug/play devices.
However, I shut my machine down every night and when I come back in the next day and start up, the thunderbolt is never detected.
Do you boot with the TB monitor connected?
I reinstalled the windows support software and this seemed to fix it but only for a short period. Any suggestions?
Do you have Windows Automatic Updates set up, which may be updating your drivers, without you knowing what is going on? Check Windows Update history.

Similar Messages

  • When is the next ios update and will it fix/address the issue with photos not being shown in chronilogical order?

    when is the next ios update and will it fix/address the issue with photos not being shown in chronological order?

    All of us here are users just like you. We have no inside info of when Apple products or operating system updates/upgrades will be released. The next iOS may not even change the issue you have.
     Cheers, Tom

  • Has anyone had an issues with certain not being able to SMS certain numbers after upgrading to IOS6.1.3

    I upgraded my software on iphone 4s on Tuesday and since then I can no longer send an SMS to my parents (how live in Spain and therefore its a Spanish mobile).  The international dialing code is correct, and I am on a contract therefore no isssues with credit.
    When i try to send the SMS it keep saying delivery failed.  Been trying for 3 days.  And also when my parents call me from there mobile numbers it now coming up as a blocked unknown caller rather than the contact name as it did pre-upgrate.
    Would really appreciate if anyone has an ideas to fix this as hate being cut off from my familly.

    Already done this and they haven't found any problems or made any changes.  All the problems started following the upgrade to 6.1.3

  • Issue with groups not being able to run applications on remote server

    Hi all..
    I've got an older PowerMac G5 running 10.5.8 that gets the OpenDirectory accounts from our MacMini server running 10.6.5. I've got a group setup called "Children" that my kids belong to and which is managed care of the Workgroup manager. However, I find that some of my apps can't be run by any of the kids if they're in subdirectories within /Applications. They receive a "The operation could not be completed because you do not have enough access privileges." I've tried playing around with various settings and finally decided to not restrict access to any applications but the problems remain.. Some apps can be run just fine but others are out of reach.. Any ideas on how to fix this or perhaps diagnose it?
    Thx!

    Hi
    Another approach is to create a folder in the local Administrators Home folder. Name it Applications. Place the applications you want to restrict access to into that folder. If you have ARD you could use the mkdir and mv commands to achieve this. In some situations I find this an easier way of managing applications rather than what's available in WorkGroup Manager. For me it only tends to work with Apple's built in applications effectively. Anything else is liable to cause a problem along the lines you mention. Some 3rd-Party applications can have dependencies that may be sited in different locations. The trick is tracking down them.
    Tony

  • Issues with spot not being saved on page

    ''locking as a dupe of https://support.mozilla.org/en-US/questions/976793''
    I have asked this question in another category and thought a change will hopefully get it answered.
    For example I save and quite on a webpage at a specific spot an article and lets say said article is fairly long, well I'm scrolled half way down when I last closed it when reopened however its has either scrolled up all the way to the top of the page or is scrolled up to close to the top. I have no idea what this is or where the problem would be located. I have already used the troubleshoot reset Firefox problem still persists. Did not have this issued on Firefox 24.

    Actually, they all go into one incredibly long list, so one of the two posts is likely to be locked, either this one or:
    [https://support.mozilla.org/en-US/questions/976793 I'm having issues for firefox 25 does not save spot on a webpage.]

  • Crosstool-ng-svn configure errors out with automake not being detected

    It has installed fine before until now:
    ==> Starting build()...
    At revision 1558.
    ==> SVN checkout done or server timeout
    ==> Starting make...
    cp: cannot create regular file `crosstool-ng-build/crosstool-ng/.svn/entries': Permission denied
    cp: cannot create regular file `crosstool-ng-build/crosstool-ng/.svn/all-wcprops': Permission denied
    Checking for 'grep'... /bin/grep
    Checking whether '/bin/grep' supports -E... yes
    Checking for 'sed'... /bin/sed
    Checking whether '/bin/sed' supports -i and -e... yes
    Checking for 'bash'... /bin/bash
    Checking for 'cut'... /bin/cut
    Checking for 'install'... /bin/install
    Checking for 'make'... /usr/bin/make
    Checking for 'gcc'... /bin/gcc
    Checking for 'awk'... /bin/awk
    Checking for 'bison'... /usr/bin/bison
    Checking for 'flex'... /usr/bin/flex
    Checking for 'makeinfo'... /usr/bin/makeinfo
    Checking for 'automake'... no
    automake 1.10 or above was not found
    Either you are missing entirely the needed tool,
    or the version you have is too old.
    configure: Bailing out...
    ==> ERROR: Build Failed.
    Aborting...
    Error: Makepkg was unable to build crosstool-ng-svn package.
    juan ~ $
    And I have automake-1.11 installed:
    juan ~ $ yaourt -Q automake
    ==> List all installed packages
    core/automake 1.11-1
    juan ~ $
    Any help?

    its pkg off AUR. whats the error after you downgraded automake? carnt build ppc64 toolchain for some reason

  • My iphone is not being detected by the itunes on my laptop with windows 8

    the iphone is not being detected by the itunes on my laptop with windows 8
    someone please help

    iPhone, iPad, or iPod touch not appearing in iTunes

  • Anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find my provider. I swapped SIMs with another iPhone 4 on ios 4 to confirm device problem.

    Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.

    Does the device get any signal? 
    Sounds like the device may have had a hardware failure.  If it is out of warranty, the only option is the Out of Warranty replacement.
    AppleCare is only an option if it is still under the original warranty.

  • I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

    I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

    I imagine your clients must be using Outlook, which is seriously broken when it comes to e-mail standards, especially HTML e-mail. You can work around the issues with Outlook by only sending plain-text e-mails and making sure that, in the Edit -> Attachments menu, the last two options are checked. Unfortunately, that means that HTML signatures are out.
    If you need something with a fancy layout, either attach a PDF file to the e-mail or include a link to a website in the e-mail.

  • IPhone 6 and iPod Touch 5 not being detected by iTunes 12

    iPod 5 and iPhone 6 is not being detected after I downloaded iTunes 12.1.2
    Tried changing the lightning conductor, that didn't help either.
    Re-installed iTunes but it was of no use. :/

    See iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Ipad 4 ios6.1 not being detected on itunes through wifi.

    Hey guys, i don't know what's effing problem is with the itunes??
    i have enabled the wifi sync option though, still my ipad is not being detected on the itunes.
    Once in a while i restarted my ipad and then the ipad was detected. I transferred some of the files and then closed the itunes. After a while i opened the software again and got the same issue..
    please help.
    Thanks

    you have to make sure both your wifi router and the computers firewall are not blocking the ports used for wifi sync with itunes

  • Phone not being detected on laptop

    hi , well my phone is not being detected, i made assure that the usb cable is alright, usb port is not 3.0 and is fine good and is among working ports, after trying so much i changed pc , cable but the phone still remains same undetected, wherein if i restart my phone it shows installing mtp drivers and shows symbol to have patience post which it shows error,it is behaving this way only after the update to kitkat i guess, because before that it was alright.suggestions appreciated and thanks in advance
    Solved!
    Go to Solution.

    To solve the issue, open Device Manager on your computer to reinstall the driver for your device while your device is connected with your PC via a USB cable.
    Microsoft Windows Vista and 7 users
    To open Device manager on your computer
    Click on the Start button. 
    In the Search box, type device manager, and then press enter. 
    To reinstall the drivers for your device
    Scroll down to the Universal Serial Bus controllers (USB section) of the Device Manager window. 
    Look for an MTP Device: Media Device, Unknown Device or any other reference to your phone. Click on this entry and choose "Uninstall" whilst leaving the device connected. 
    Wait a few minutes, and the computer will reinstall the drivers for the device.
    Now, the phone is accessible via Computer/My Computer on your computer.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Bluetooth not being detected on Windows XP SP2 (3000 N200)

    Hi,
    I removed windows vista that came preinstalled and installed a windows xp sp2. I downloaded the bluetooth drivers for my version ie. 3000 N200 0769 BBG. But the bluetooth is not being detected. The bluetooth LED is always off (Only the WLAN LED is green). I tried to install drivers from broadcom site also. But, installation is not proceeding as it cannot detect any hardware. Bluetooth was working properly on windows vista. So i dont think it is any harware issue.
    Any idea what could be the problem? Please help me out with this ...
    Thanks & Regards
     Ashok

    Bluetooth is working 100% perfectly with Win Xp. I think you guys are not installed proper driver, i think this link will help you out..
    http://www-307.ibm.com/pc/support/site.wss/TVSU-UPDATE.html#DLP
    Best option is better to download System Update 3.14 (16MB) tool in the avobe link and you will get all the proper drivers for your lap. Till now you uanble to slove your problem I will upload the Blooth tooth driver for you. Let me know Waiting for your reply.
    Thank you
    _Kid_

  • My built-in webcam is not being detected by CyberLink Youcam

    My built-in webcam is not being detected by CyberLink Youcam (webcam) Pavilion dv6-6c10us

    Hello,
    I see that you're having an issue with the webcam in the notebook. If you could, please check and see if the webcam is listed in the device manager. If you don't know how to check for that, you can follow step 1. 
    Now, if you can't seem to find it listed in the device manager it could be that the webcam may have become unplugged internally and requires service. It could be a faulty webcam module which is not been recognized. I suspect you might have to send the Notebook in for a warranty repair to get it fixed. Now, if that's the case after following the steps below you will need to call HP@8004746836 and see what options they have to replace or repair the notebook. 
    Also, you can follow these steps to try and resolve the issue. 
    Steps:
    Please follow this document which will guide you through a couple of steps on how to resolve this issue you're having. 
    The document should something like this:
    First, try this steps that's circled. 
    If the first steps doesn't seem to resolve the issue go ahead and follow the next step below. 
    The first section "Video does not appear in your webcam software (such as YouCam, Skype, Messenger, etc.)" will guide you through a couple of trouble shooting steps to get the webcam to work within these programs. 
    If the first step doesn't resolve the issue please go to step #2 "Reinstalling the original webcam program that came with your computer”. This section will guide you through recovering the webcam software and drivers. This is the most important steps in the document if nothing before this resolves the issue. 
    It should look something like this:
    Once you have finished both steps please let me know the outcome. If you have any more questions please ask. 
    THX

  • Power button not working headphones not being detected

    have a sony xperia  z tablet, power button has stopped working  and  the headset is not being detected by the headphone jack,
    really annoying i ahve tried resetting and that didnt fix the problem, i tried restorign but cant because the power button doesnt work to shut it down!
    only a couple of months old - need sony to fix the problem, i use it  for work and i need it working 100%! please respond  sony - dont depend on other users to fix your issues also  you have shut down most of your stores in ireland which does not help matters.

    Hi johnboyire,
    Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    With the information supplied, unfortunately if you have performed a software reset and repair on the device then this may be related to hardware, I can only suggest that you contact Sony Mobile within your region and advise them accordingly.
    They will be able to help. Please use the link below to find there contact details.
    http://www.sonymobile.com/global-en/support/contact-us/
    I apologize for any inconvenience this may cause.
    Don't forget to mark posts that answers the topic as Accepted Solution. 
    If you find any post helpful, press Kudos.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

Maybe you are looking for