Issues with updating apps on ONE iMac - please help!

Hello everyone
I use an iMac at home and at work. At work, firewalls or similar have been stopping my apps being updated and also accessing the itunes store
I brought the iMac home at the weekend so I could bring everything up to date.
However, the itunes stuff downloaded immediately. Two apps from teh store updated quickly too.
However 6 other apps would not update - I kept getting a null message.
After a few attempts I have been getting teh following message for all six apps. "The product file could not be verified It may be damaged or was not signed" I have tried updating all and doing them individually. I even tried deleting one app completely to reinstall but the same message came up everytime.
The apps range from Final Cut Pro X to Angry birds so it's not like they even just apple ones.
Anyone able to help me?
Thank you
Chris

"The product file could not be verified It may be damaged or was not signed"
OS X Lion Update 10.7.4 (Client Combo) may help Chris. Restart your Mac after the combo is installed then try updating your apps.
Make sure you are using the same Apple ID for updating that you used to them with.
It's ok to do this even though you are already running v10.7.4 on your iMac.
I even tried deleting one app completely to reinstall but the same message came up everytime.
If you just dragged the app to the Trash, that does not remove all the associated files.
Use this free utility > Download AppCleaner for Mac - Uninstall your apps easily. MacUpdate.com
edited by: cs

Similar Messages

We use dial up and upon updating to Firefox 10 we have had issues with facebook/ playing games...please help!

We use dial up and upon updating to Firefox 10 we have had issues with facebook/playing games...please help!

Hi nancybrendel,
Have you looked at the Knowledge Base article [[Problems using Facebook in Firefox]]? There is a lot of good troubleshooting information in there. Please be sure to try all of the suggested steps. Each one is valuable and may be the answer to your issue.
Hopefully this helps!

Issue with Updating Apps through iTunes

I have been having this issue for sometime now, and through multiple versions of iTunes. Whenever I open up iTunes and see that there are apps that I need up update, i'll click on applications, ill go and click update apps, I'll see the apps that need to be updated and ill click update. I put in my password, but when I do that, I get an error saying:
We could not complete your iTunes store request. There is not enough memory available.
There is an error in the iTunes Store. Please try again later.
Obviously I have enough memory and space on my computer, but not sure if this is an error with the store itself or with my computer some how. I can download new apps with out a problem, purchase anything and download anything through iTunes, even after that error pops up, but I just cant update any apps. I can update them on my phone, and if I sync my phone with iTunes, and then try updating apps that might not be on my phone when I updated them, it will work then. Not sure what would cause this, and its not that big of a deal, just an annoyance and something I find a bit odd.
Thanks for any info and advice.

What part of no wifi did you not understand?
I'm well aware that I can update through the app store, if you had read the original question properly you would see that.

" Compatibility issues with power management. on g50 45 . please help.

LENOVO G50-45my BIOS is up to date and I updated my power management system just yesterday. The battery also drains very quickly , just 90 minutes. Please help.I am getting this problem since a week now. and my battery drains so quickly even when on power saver mode. when i click on the message , I get no solution although my laptop is connected to internet it says , its not connected.And when i click on it , it says , Now if I click " View all problem this applies to , it says a different thing, there are two things saying the sam thing, driver software installation. wheni click one of them it says, " Pnp driver not found" PLEASE HELP. Thank you. I want my power manageent system back.

You should check your startup drive as a starting point, if programs are crashing regularly. That's obviously not "normal." Run +Repair Disk Permissions+ in Disk Utility while started up normally. Then, start up from another disc and run Disk Utility to use the +Repair Disk+ on the startup drive, to look for disk directory issues (you can startup from the Mac OS X installation disc to run Disk Utility).
When this happens, Force Quit doesn't do anything. Any other options?
You can start the Activity Monitor program and quit processes that look relevant to the app. Sometimes, force quit does not work to quit an app because an underlying process keeps running. Sometimes, the Mac is not able to restart or shutdown normally because an app refuses to quit, due to this problem. It is often difficult to know if you should kill a process, so after doing it to make an app quit, it would be a good idea to restart.

Issue after update Apple TV 2. Please Help!

After i accidental update my Apple TV. I can only see 2 icons. Computer and Settings. I use to be able to use youtube for my toddler to play his favourite learning programme... Please help... Can't bear to see him sad for not able to watch his learning programme and songs...

Welcome to the Apple community.
Unfortunately, a number of users appear to have encountered this problem. Some of these users have reported that the problem just disappears the following day or shortly after. Other users have found various other solutions to this problem.
Firstly, are you receiving any date and time errors when you turn on your Apple TV?
Check that you are properly connected to the Internet, by ensuring that you have a proper IP address and not one starting with 169. Also check that your location for the iTunes Store is set correctly, if so you might try changing it and then changing it back.
If the problem persists try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router, or if this doesn't work you might like to try a restore.

Problem with safari app keyboard ?? Please Help

Hello,
When i enter website address in safari app it does not show space bar in keyboard?
please help.??

You cannot have a space in a URL or any of several other sorts of characters, i.e., ASCII control characters, non-ASCII characters (80-FF hex), reserved characters ($, &, +, etc.), and unsafe characters (space, <, >, etc.).
If any of these characters are required in a URL then they must be URL Encoded. This consists of a % character followed by the two digit hexadecimal value of the character. For example, a space character would be encoded as %20.

E2000 NAT issues with my xbox. ive tried everything please help!

ive tried the dmz port range triggering, forwarding. ive done it all please help me all i want to do is a play little online.

what is the modem that you are using? some internet provider use a modem/router instead of a 'modem only' device.
if it is a modem/router they have NAT enabled, and this would cause Double NAT on the modem and on the linksys router, which would cause the port forwarding setup not to work.
if that is the case you need to ask your provider to set your modem/router to bridge mode or work as modem only. when that is done, then you can proceed to port forwarding by following the instructions here

Issues with updating app

I recently had an update for my Verizon Backup Assistant app, I hit download and put the phone down walked away like I normally do, cam back a few hours later and it still said waiting and the app was transparent. I waited a little bit longer and it still said it. It has been three days and it still says waiting and other aps have updated just fine so I have no idea what is going on. I looked at other threads on here and none of the solutions have been working, I restarted the phone, turned it off and then back on, went to my old pc and tried to delete it from there but that did not work either. When I use my macbook the apps do not show up in that list so I cannot uncheck anything from there, it just shows the image of the phone screen but when i hover over the app with the cursor no X pops up either. Even on the PC its removed from the list but still on my phone screen. I have tried everything even resetting my prefferences on the phone and nothing is working for me it just sits there, which isnt a big deal I just do not understand why I cannot delete it.

Have been to Library, and looked in Receipts/InstallHistory.plist
This plist confirms that on 27 Jan App Store downloaded Pages version 5.0.1 again (actually for the third time it appears), although it was supposed to be downloading version 5.1. My App Store/Updates page says version 5.1 was installed (which it isn’t). Same issue for Numbers.
The plist also confirms that the App Store forced me to download the same version of iPhoto in December and Today.
Keynote and iMovie (not one of the iWork) won't open until I download again, but do not have the internet capacity to redownload these large files again and again.
So far iTunes, Aperture and iBook do not seem to be affected. By the way have done simple things like restart, repair permissions etc...
Are there some files/applications that control the downloading of new versions that might be malfunctioning?

I've seen several issues with updating Apps. Is there a problem on Apple's end?

I'm unable to update my Apps. The "Update All" button is not highlighted. If I click on the individual App, it just goes to that App, instead of updating it. I've seen this issue from other people, but no one has supplied an answer that I've seen. Is the problem on Apple's end?

Actually, I have seen a few people answer it and state that restoring to factory settings fixed it. You can try that. Backup your iPad, restore to factory settings, restore your backup and see how that works for you.
Read this for more information.
Use iTunes to restore your iOS device to factory settings

Prod issue with Inventory management in BW ..please help

hi Folks
i am new into inventory management extraction into BW. i have read all the document regarding the extraction. My question is
1. what all the comon produciton issues you wil come across when you do the inventory management
2. what is the dificlut challenge you face during extraction and validation
3. what all things you need to consider or keep in mind while doing this process
4. what is pros and cons of this process ..any bettar way to improve this process?
please shoot me your thougths ..which will helpfull for my new task..

My Dear Friend...
Typical Steps for refreshing your understanding :
1. Transfer Business Content Datasources 2LIS_03_BX , 2LIS_03_BF, AND 2LIS_03_UM in RSA5.
2. Go to Transaction LBWE, Activate Datasources 2LIS_03_BF, AND 2LIS_03_UM.
3. Go to Transaction MCB_ select SAP BW usage 'Standard' Radio button.
4. Save it.
5. Go to Transaction MCNB, enter name of run Stock_init. Enter Termination date in future. Enter Datasource as 2LIS_03_BX.
6. Execute the initialization.
7. Entries can be found in SETUP Table MC03BFSETUP & MC03BFSETUP.
8. Run SETUP for 2LIS_03_BF, AND 2LIS_03_UM using TCodes OLI1BW and OLIZBW respectively.
ALWAYS LOAD in order as BX datasource first then BF datasource and then UM datasource in cube
9. Run the extraction for 2LIS_03_BX in BW.
10. Compress the request with No Marker Update NOT SET i.e. unticked or unchecked.
11. Run the extraction for 2LIS_03_BF in BW.
12. Compress the request with No Marker Update SET i.e. ticked or checked.
13. Run the extraction for 2LIS_03_UM in BW.
14. Compress the request with No Marker Update SET i.e. ticked or checked.
Steps 1 and 2 shall be executed in Development and transported to production and step 3 onward should be carried out in Production itself with posting Block.
And about Reconcilitation of data ...Count the number of records in R/3 in particular table and check with BW is its matching...When you request in Detail Tab you can find the number of records...
Then check if the balances are matching in R/3 and BW...saying for ex: Check opening Stock for today in both the systems...
If you follow the process properly I dont think you will face any issues...I havent ever seen any complication in Inventory loading...Dont worry...Just follow the typical LO Extraction steps...All Good
Regards...
Sandhya

Issues with restarting after a program crash- please help

Two questions regarding restarting after a program has crashed on Leopard.
1. I had an issue where Parallels crashed and I had to restart. When restarting, the dock closes and it goes to a point where there is a circle timer. This does not stop and an error comes up stating that I need to hit the power button. Is this "normal" after a program crash and restarting? On a side note, I couldn't close the program with Force Quit. This seems to be happening often.
2. How often does it occur for you where a program will not close with Force Quit? I've had Parallels crash and some other programs. When this happens, Force Quit doesn't do anything. Any other options?
Thanks for your help.

You should check your startup drive as a starting point, if programs are crashing regularly. That's obviously not "normal." Run +Repair Disk Permissions+ in Disk Utility while started up normally. Then, start up from another disc and run Disk Utility to use the +Repair Disk+ on the startup drive, to look for disk directory issues (you can startup from the Mac OS X installation disc to run Disk Utility).
When this happens, Force Quit doesn't do anything. Any other options?
You can start the Activity Monitor program and quit processes that look relevant to the app. Sometimes, force quit does not work to quit an app because an underlying process keeps running. Sometimes, the Mac is not able to restart or shutdown normally because an app refuses to quit, due to this problem. It is often difficult to know if you should kill a process, so after doing it to make an app quit, it would be a good idea to restart.

Color Banding issue with FCP and Color...PLEASE HELP!!

Ok so heres whats going on and i'm hoping some can help me out here cause i'm totally lost!
So we have a film shot on HDV. The scenes are mostly dark and well lit. Everything in the FCP timeline looks great (little noisy but great). We brought it over the color and did our color grading and corrections. Once we returned back to FCP, we started seeing some major color banding. We then applied the neatvideo plug-in with helps with noise but it made it far worse.
We are rendering in 10bit but how can we remove this banding!!
Thanks again for the help!

Yeah, you can't critically judge video quality on computer displays. They won't show you an accurate image. Unfortunately, there is no way to send a signal to a video display (HDTV, broadcast monitor) for this purpose from an imac.
Shane

HT1414 Good morning, I have an issue with my Iphone 4s, could you please help me?

My IPhone 4s is losing battery at an alarming rate, now it is getting very HOT while it is turned on and even shuts itself off because it is getting too hot?

- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

Issues with my MacBook's display. Please help!

Hi all, I have a mid-2009 MacBook 13" and the display keeps randomly turning itself right down and then off completely. As it is the 2009 model I do not have the option to select/deselect auto-brightness as everybody keeps telling me it's to do with this. Does anybody else know how to rectify this at all? I've heard it's quite common and to be fair, it's a tad irritating when I'm trying to watch something online. Thanks in advance!

It won't hurt to try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
and PRAM OS X Mavericks: Reset your computer’s PRAM

Hey guys on my mac book pro after updating three apps wont leave my dock, when i close them they just re-appear they are "LoginServer", "USBServer" and "NetServer" any ideas to what is the issue?????? PLEASE HELP.

Hey guys on my mac book pro after updating three apps wont leave my dock, when i close them they just re-appear they are "LoginServer", "USBServer" and "NetServer" any ideas to what is the issue?????? PLEASE HELP.

Hi I have just got back from the apple store and the guy at the Genius bar looked at it and said it was a manufacturing fault, and because it has been like it since new, and seemed to be getting worse he replaced the computer and I have a new warranty from today.
We got the feeling as soon as he looked at it that he has seen this before, I did say to him I was concerned it would be a replacement screen and I was not really happy about that as it was so new, and he said that was the normal procedure, but as the fault was already there at new and it was getting worse they would replace. I could not have asked for a better service.
Not unpacked this one yet but am hoping all is good, its a great little machine.
Thank you for your responses, and I hope this might help someone else. One thing it did not seem to be missing pixels but something to do with the screen production?

Issues with updating apps on ONE iMac - please help!

Similar Messages

Maybe you are looking for