Issues with video/audio playback and Source window

I have some video that I am trying to import to get into my sequence. Anytime I open the video into my source window (or drag it to the timeline), the audio goes crazy. It starts skipping around and jumbling itself. When I open the video file in Quicktime on my computer, it opens and plays fine. Also, I don't know if it is unrelated, but sometimes when I open a video in my Source window, there is no audio. I can drag it to the Sequence and double click on it to bring the Sequence video into the Source window and it plays fine.
The video that I am having issues with is a .mov filmed from an iPad (not sure which iPad model). It is filmed in Portrait mode, not sure if that matters. Please let me know what other information might be needed to troubleshoot this issue.
Thanks!

Ooh. Sorry about that.
- I am using Adobe Premiere Pro CS6 v.6.0.3
- I'm sure I have the latest update. I'm using Creative Cloud, and the Adobe Application Update Manager says everything is up to date.
- Operating System is Windows 7 Professional (Service Pack 1)
- Source footage is a .mov filmed in portrait mode (I didn't record it.. Haha) on an iPad, not sure the model.
- I am getting no error messages.
- I was just dragging the video file from the Media Browser to the Source window. Nothing special.
- This is working on all of the other clips filmed from the same iPad at same resolution, etc. Also, this particular video plays perfectly in Quicktime. It's just when I try to play it in Premiere Pro.
- Other software that is currently running is standard stuff: antivirus, Outlook, Gtalk, Dropbox. Nothing that uses audio.
- I have installed K-Lite Codec pack when I got the computer.
- I have a Dell Preision T7600, Dual Xeon Quad-core processors (2.00GHz), 16 GBs of ram, Nvidia Quadro 4000 (2GB), and running off of a 256GB SSD.
- I am using the Mercury Playback Engine GPU Acceleration.
- The issue is happening on playback, both in the Source window and the Program window when I drag the video to the Sequence. It plays fine in Quicktime.

Similar Messages

Autosync - Sync Detection Problem with Video/Audio from different sources

Hi,
i've got the following problem:
I'm editing a feature film, where video comes from tape and audio from harddisc-recorder. The clips are combined/linked manually via in-point (slate).
If I cut this video/audio combined clip in the timeline, and move only the audio 3 frames to the right, sync detection informs me correct about the out of sync problem (3 frames). BUT: If I split the audio file in two pieces, the left clip still has the "out of sync" info in the timeline and remains "linked" to the video, but the right clip doesn't show his relation to the video anymore !!!
Is this a bug ?
Because, if I use video and audio from one "media-source", ex dv, the sync detection in the timeline is working correct with the above example ?
I'm lookin' for a similar way to sync clips like autosync with media-composer and thought combine audio and video clip to a new combined clip should do this....
Thanks for help !

I have my waveforms back! Thank you SO MUCH! I looked everywhere and just couldn't find a setting for this.
As for the sync, I guess that's OK - it's no worse than what I had before (and with the waveforms back, less of an issue to do manually). Would be nice if they'd add the ability to offset the audio track in the Modify Clip screen at some point (and it would open up the multi-cam sync feature to more users), but I can cope without for now.
Thanks again for your help.

Premiere Pro 6.0 Low audio playback in source window.

I'm using PPro 6.0 and out of the blue the volume of my source window is lower then the Program window. The levels are consistent. The actual volume coming from the speakers is louder on the program side then the same clip on the source side. All settings are the same as they have always been as far as I can tell. I'm using Premiere Pro WDM Sound. I've rebooted, I've reseated all the connections. Kinda stuck with this one. I suppose the sound card could be dying. Any other ideas?

John
Thank you so much for all this (and wine snob) Sorry I've not contacted you sooner but my internet connection is down at home......it never rains but it pours eh? I will read and digest your suggestions fully when I'm back up and running.
Thank you loads.
Sarah
>An added note to Sarah (if she ever comes back)
>
>The HTM note in the Zip I uploaded says the 6.02 update is a Beta... but don't
>be worried, Adobe moved on to P6.5 and then the new PPro and just never
>changed the note for 6.02
>P602 IS stable (I still use P602, in a Win2k boot partition) to run my
>Pinnacle Dv500 card for 8mm/Vhs captures... in fact, the only reason I now use
>Premiere Pro is my new computer's motherboard wouldn't work "fully" with Win2k
>(couldn't find device drivers for all the features) and when I switched to
>WinXp I couldn't get P6 to work at all... so now I have a dual boot drive,
>using Win2k only when I want to use the Dv500 and then rebooting to use PPro
>for editing (all data is created onto a 2nd hard drive)
>

Poor quality video in sequence and source windows

In Premiere CS5 the two windows at the top are displaying, for lack of a better description, dropout in the video. (Small white sparkles or pixels filled with white.) the same clips play with no dropout in quicktime. I am working in standard DV/NTSC. the output resolution is set to full for the windows in premeire. I am using an NVIDIA GTX 460 video card. Is there a setting I am missing?

OK.
You say you're working in DV/NTSC. Does that apply to the clips, the sequence, the export...?
In other words, what are the specifics details of all three elements?

Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2.

Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls help

Lindsay,
Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard.

MacBook Pro 15 Mid 2009 - Mac OSX 10.10.2 - Any issues with video lagging/audio lagging?

Hello
Current OS and System details below. Have started to experience audio and video lagging when browsing (not effecting audio on music)
Have looked at some forums and it appears to be an issue with some later cards and Mac Book Pros
Any one else experiencing issues? and if so are they resolved? and if so by what manner were they resolved?

Since yo said "an issue with some later cards and Mac Book Pros" I would also post n the MacBook forum
MacBook Pro

Im having issues with the audio on my phone, I can't hear any audio i.e music or video unless I have the headphone installed.

Im having issues with the audio on my Iphone 4s, I can't hear any audio i.e music or video unless I have the headphone installed. Any clues the problem or how to correct?

1. http://support.google.com/youtube/bin/answer.py?hl=en&answer=58132
2. System Preferences > Flash > Advanced > Delete All
3. Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Quit Safari.
    Restart computer. Relaunch Safari.

Program and Source Window Freezing :/

Have been opening up a large project in Premiere for the first time in a around a month and am having major problems with the program and source windows freezing. I don't know what's happening and am in major need of help as deadlines are incoming. I REALLY want to speak directly to an Adobe representative but this website is making that more difficult than it needs to be. Has anyone been having similar issues on feature length projects within Premiere like this and are willing to help? Preferably a representative of the company but anyone who may know what's happening; feel free to chime in.
Josh

Windows or Mac, and which operating system version?
What has changed since it last worked... if Windows, do you do the monthly updates?
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Trivial Video/Audio playback weirdness: a simple question

fire up my system this morning and fire up the old g3 so i can listen to boot liquor radio on itunes radio and i'm making some finishing color adjustments on some sequences. all is fine and dandy. turn down the g3 and turn up my jvc vtr so i can monitor the audio on a qc playback so i can label this particular sequence as ready for mpeg2 compression. hmmmm, no audio is getting through to my vtr. ***?
check the connections, all the cables, run a tape with audio and everything's good. restarts and relaunches later and still no audio is getting to my vtr but i have firewire video and i also have machine control which is rs422 anyway.
scratching my head, i toggle through the video playback options. for some odd reason i had video playback as Apple Firewire DVCPRO NTSC (720x480). the second i switched to Apple Firewire NTSC (720x480) i had audio playback via firewire thru my vtr.
hmmmmm.
switch over to my panther boot drive, fire up fcp 4.5, look at the video and audio playback and i'm using Apple Firewire DVCPRO NTSC there and i get video and audio playback thru my vtr.
i could have sworn before 5.1, i was getting audio in the same setting as well.
searched the manual and i cannot find a reason for this. what is the difference between Apple Firewire DVCPRO NTSC playback and Apple Firewire NTSC playback? why would my audio follow one and not the other?
it's a burning question that will stay with me, at least until i have another spaten oktoberfest.
thanks!
zebbie

what is the difference between Apple Firewire
DVCPRO NTSC playback and Apple Firewire NTSC
playback?
Protocol
turn up my jvc vtr so i can...
I believe the "DVCPRO" is specifically for
Panasonic.
this describes control, not playback of video or audio. plus, i use the dvcpro firewire setting for playback of audio and video in fcp 4.5. as described earlier, i already have rs422 control.
At least you tried looking in the manual
no, i didn't "try" looking in the manual, i did look in the manual.
thanks anyway.

Issues with multiple audio tracks

Hello everyone. I need some help with my DVD Reel. … Please
I have a DVDSP project that I’ve been using and updating for the last year. It contains over 100 small 4-minute clips (Mpeg-2 Video + AC3 Audio) plus a lot of menus and buttons….
Everything worked nice and perfect… except that I added some surround clips last week (using stories)… so now I have one audio track (A1) with all stereo audio and a second audio track (A2) with my surround audio. Again, no problems until today when I used the same track to add a new clip with stereo audio only (A1)…. And it doesn’t want to playback on DVD Player (but it plays in the simulator)…
…. Now here is the question. Does the additional (surround) audio track have anything to do with this problem or is there any other reason why the stereo clip didn’t want to play after the surround clip? … or Do I need to create stories for my stereo clips from now on?
Some more information: I’m using Final Cut Pro and Compressor to crate my media… Intel Mac OS X… DVD Studio Pro Version 4.1.2.
Thanks for your help
Adriana

Got an almost kind of (but not really) similar problem. I have videos with multiple audio (AAC and AC3 passthru) in an m4v file. the AAC is always defaulted with the "enable" tick in the properties box. I've tried almost everything I can think of to enable the AC3 track by default so that frontrow or QT will play it. but everytime I save (even save-as) it defaults back to the AAC stereo.
Any ideas? is this a "feature" of 7.5.5?

Problem with video audio sync using Bluetooth headphones

I have recently bought a pair of beats studio wireless headphones but when using my ipad there are sync issues with video and audio. Many apps have the problem but sky go seems to be the worst followed by YouTube. Apple video is not too bad but not perfect.

Hello Jamie,
Thank you for the details of the issue you are experiencing with your new Bluetooth headphones. It can certainly get frustrating if the audio gets out of sync when using the headphones.
I recommend reviewing the sections titled "Resolution" and "Bluetooth disconnects, intermittent connectivity, or unable to find" in the following article for steps to troubleshoot the issue you described:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Thank you for using Apple Support Communities.
Best,
Sheila M.

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Issues with Safari 3.0.1 for windows

Issues with Safari 3.0.1 for windows (at work):
Lenovo T60 with intel core duo T7200 @2.00Ghz plus additional monitor (Lenovo ThinkVision) in extended desktop mode running Windows XP Pro 2002, SP2
1. Taskbar is configured to autohide: when Safari is the top (active) window, it remains on top. If the taskbar pops up, it does so behind the Safari window, because I cannot see it.
2. If an open Safari window is dragged to the external (secondary) monitor, then maximized, it disappears to the side. It is not closed. I can still find it via Alt-tab or in the task bar and can, by right-clicking ‘Move’ from the taskbar use the arrow keys to move the window back into place. Clicking to reduce the window, then re-maximizing leads to the window disappearing to the side again.
3. In general my impression is that this does not function at a ‘beta’ level, but more of an ‘alpha’ level. Still very buggy.
Jcw
iMacIntel Duo 2Gh Mac OS X (10.4.7) 1G-RAM, 250vRAM
iMacIntel Duo 2Gh Mac OS X (10.4.7) 1G-RAM, 250vRAM

This is a beta...thats why they give you the option to report probs via the bug icon. Since you are having these probs try and report them, I am not sure if apple has the time to scan these forums to try and find the big probs that people are having. So unless you report bugs, (and wait until the final realease) then they might never get noticed and or fixed.

Is there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly?

Greetings everybody,
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
On this particular product, the product variants are supposed to work in such a way where:
If you select the value "1/8" from the "Choose Ribbon Width" field
THEN
The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
Thank you very much for your time and help!

Hi...
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
At the top of this window you'll see the following:
Apple Support Communities > Mac OS & System Software > Safari > Discussions
This the Safari forum for the Mac OS X.
Better that you post your topic here > Developer Forums: Apple Support Communities
I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum.

TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
The HTC hotspot works fine with everything else I connect to it.
Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

Issues with video/audio playback and Source window

Similar Messages

Maybe you are looking for