Issues with Video Exporting in CS6

I get an error message when I try and export videos using Adobe Media Encoder.
"Could not complete the Render Video command because of a problem with Adobe Media Encoder."
Are there some settings I need to adjust or something I need to download? I have a subscription to CS5 Extended installed as well. Could there be a conflict?

Here is an update...
If I open the .psd in CS5, it works.
I am on the subscription plan for CS5. There must be a conflict having them both installed. Should I remove CS5? Or does CS6 have to be licensed first?
Any ideas?

Similar Messages

Intermittent issues with video output initialization

Hi Guys,
I have received a new (i5, 15') Mac-book Pro more than 9 months ago. About 6 months ago it started having some serious intermittent issues with video output. Those issues are numerous and different every time, but all seems to lead to GPU problem. In chronological order:
1)Started showing static colors as flickering and white color as blue.
2)Blue screens in bootcamp and hangs in mac os
3)Startup problems (fail to start)
4)Startup problems resolved with firmware patch, but video fails to initialize during startups:shows black on mac os, and distorted green during bootcamp.
So right now I am stuck with #4. The main issue is that it is intermittent - sometimes it starts to happen and sometimes it does not. Is there any way I can make apple replace the unit or the video-card? I did bring it to a apple certified service center, but they did not give any crap, even when I was able to demonstrate it to 2 people in there and gave me back the unit after failing to reproduce the problem on their own. I have all those problems in video and photos, but I don't see anywhere I could send them besides this forum.
Some of the evidence (I have much more):
http://www.youtube.com/watch?v=MsTYnUFCX1I
http://www.youtube.com/watch?v=zK85Hi9gx24
http://www.youtube.com/watch?v=pRH3DpN7qB0
http://www.youtube.com/watch?v=dMXo8qF6S_k
Message was edited by: Breakable

"I have received a new (i5, 15') Mac-book Pro more than 9 months ago."
You are still under warranty. *Call AppleCare*
"Is there any way I can make apple replace the unit or the video-card? I did bring it to a apple certified service center, but they did not give any crap"
No you cannot make Apple do anything. What you can do is call _Apple Customer Relations_ in your country. You can call AppleCare & ask politely & firmly to be transferred over to Customer Relations if there is no direct phone number like there is in the US. Relay to them what you stated in this post. See what they can do for you.
You posted in the wrong MBP area (Original). I have requested that a HOST move your post to the proper forum MacBook Pro (2008 and Later). There will be no need for you to repost.

Issues with Video Conversion in N95 8GB

I purchased a N95 8 GB yesterday. I have been trying to get the video conversion to work with video manager
The conversion status tab do not go beyond 40% and it hungs there without any error message.
Has anyone faced similiar issues with video.
I used another convertor to convert the AVI file to mp4. But this file could not be played by N95 real player.
Are there any specification for conversion, for the video to play in N95.
Can anyone suggest on the best tool to convert video to MP4 and play in N95 ?
Thanks,
Sooraj

For tips and tricks on video and nseries visit this blog..
http://portablevideo.blogspot.com/
640K Should be enough for everybody
El_Loco Nokia Video Blog

Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2.

Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls help

Lindsay,
Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard.

Issues with video quality after editing in Premiere Elements. Please help!!!

I am having issues with the quality of video output from Premiere Elements. I tried to combine 4 videos clips that I took (all were crystal clear when viewed prior to combining them in Premiere Elements). The first clip is quite pixelated, the second has wavy lines running across it the whole time (recorded webinar), and the third clip looks crystal clear. (FYI...first clip and third clip were both taken using the exact same settings on my Canon) I am not very tech "savvy". I am guessing it has something to do with the way I saved or "shared" the video after editing? But I have NO IDEA what settings I need as I am not very "tech" savvy! I want to upload the finished product to Vimeo. I looked on Vimeo and followed instructions from a tutorial that a Premiere Elements user posted about how to save the best quality video for uploading to Vimeo, and the quality turned out FAR WORSE than the first time I saved it. Please help!!! Thanks so much!

Thanks for your response John! Do you think my issue may be due to the way I initially "set up" the project when I created a new project from the very beginning? I am operating on Premiere Elements 10, so I do not see an option for sharing online directly to vimeo....only facebook and Youtube. I am combining 4 video clips. 3 of the 4 clips were shot on my Canon EOS 60D, and 1 of the video clips was a recording of a PowerPoint based webinar that we did via Meeting Burner (meetingburner.com). Since I am combining more than 1 video format, is it likely that I will run into quality issues? The strange thing was that 2 of the clips shot with my Canon showed up blurry after exporting/sharing my final video, but one of them was still crystal clear. This doesn't make any sense to me since I did not change any settings on my Canon. I didn't see any specific tutorials on setting up the project to match the video from that list of Tutorial links.

Issues with Adobe Flash Professional CS6

I have been using Adobe Flash Professional CS6 and have had a few issue with it.
-The program crashes
-The program stops responding quite often whilst I am working and will take a few seconds to load
- It will sometimes glitch and my clicks will be delayed. I have also had the issue where certain pencil lines will not undo
- When moving things on the stage they will sometimes duplicate themselves
- Sometimes when I have selected a tool and used it once it will automatically change back to the Selection Tool
- Sometimes after I have imported a video the keyboard shortcuts will stop working
Has anyone else had these issues and if so, please, how do you fix it?

My computer Spec's are
- ACER
- Aspire 5745G
- Windows Home 7 Premium
- Service Pack 1
- Intel Core i5 CPU. [email protected]
- RAM 6GB
- 64-Bit Operating System

Issues with video/audio playback and Source window

I have some video that I am trying to import to get into my sequence. Anytime I open the video into my source window (or drag it to the timeline), the audio goes crazy. It starts skipping around and jumbling itself. When I open the video file in Quicktime on my computer, it opens and plays fine. Also, I don't know if it is unrelated, but sometimes when I open a video in my Source window, there is no audio. I can drag it to the Sequence and double click on it to bring the Sequence video into the Source window and it plays fine.
The video that I am having issues with is a .mov filmed from an iPad (not sure which iPad model). It is filmed in Portrait mode, not sure if that matters. Please let me know what other information might be needed to troubleshoot this issue.
Thanks!

Ooh. Sorry about that.
- I am using Adobe Premiere Pro CS6 v.6.0.3
- I'm sure I have the latest update. I'm using Creative Cloud, and the Adobe Application Update Manager says everything is up to date.
- Operating System is Windows 7 Professional (Service Pack 1)
- Source footage is a .mov filmed in portrait mode (I didn't record it.. Haha) on an iPad, not sure the model.
- I am getting no error messages.
- I was just dragging the video file from the Media Browser to the Source window. Nothing special.
- This is working on all of the other clips filmed from the same iPad at same resolution, etc. Also, this particular video plays perfectly in Quicktime. It's just when I try to play it in Premiere Pro.
- Other software that is currently running is standard stuff: antivirus, Outlook, Gtalk, Dropbox. Nothing that uses audio.
- I have installed K-Lite Codec pack when I got the computer.
- I have a Dell Preision T7600, Dual Xeon Quad-core processors (2.00GHz), 16 GBs of ram, Nvidia Quadro 4000 (2GB), and running off of a 256GB SSD.
- I am using the Mercury Playback Engine GPU Acceleration.
- The issue is happening on playback, both in the Source window and the Program window when I drag the video to the Sequence. It plays fine in Quicktime.

Issues with video rendering

I just wanted to mention, I love having the ability to edit video in my paint program!
But to get straight to the point, I am have some issues with rendering video. Let's say I add a white fade on a video that I am currently working on. The issue about that is that the video once it's finish rendering will not display the white fade transition within the video, it will just do a hard cut transition and it drives me crazy. It also has some other issues while I am adding effects that don't appear in the final footage. am I exporting my video in the wrong format? I usually export in WMV, or MOV, but I am willing to change that.
~Thank you in advaced for any assistance given about this small issue.

Other than what Mylenium suggests, there isn't a whole lot else we can do. It is a very unwise thing to jump into using AE without introducing yourself to the basics, because the application contains too many ways to foil the uninitiated. Furthermore, since you don't know the arcane AE lingo, there are also translation issues to deal with.
Almost NO ONE successfully learns AE intuitively. Those who are successful have last names that begin with the letters "ein" and end with "stein". Almost EVERYONE has to start with the basics. Here is a very good introduction to the basics.
Fight the temptation to jump right into AE. You do so at your peril.

Issue with video playback

I'm having an issue where video playback drops to 1 frame per second or less. The problem occurs when I have the mouse on the same screen as the video (dual screen setup) or on the second screen.
As you can see in my information, I'm running an IBM Thinkpad T43 with a Viewsonic q20wb monitor.
Thanks for the help!

Yes, I have just used the normal Video-object together with the normal trick to load Flash Video files with it. Nothing special only with a full URL for the play()-method. I have attached the source code for your convenience. The original files are edited in Premiere Pro CS4 and are based on one original ripped DVD vob file and a newly created Quicktime-based slideshow animation which has then be edited into one using Premiere.
After that I have selected the sequence of the Premiere project which I have exported using File > Export which is using Adobe Media Encoder. For the encoding I haved used the Export Settings: "Format FLV | F4V", Codec On2 VP6 and then altered the video size and bitrate so that the file size gets smaller this is for the Alzheimer08.f4v file. The other file used the H.265 Web Medium profile with also the video size and bitrate modified after it got encoded and uploaded to my webserver.
The original files used by the Premiere Pro project are:
VTS_01_1.dv
Type: DV Stream
File Size: 2.6 GB
Image Size: 720x576
Average Data Rate: 3.4 MB/Second
Compressor: DV - PAL
Quality: Normal (3.00)
SLIDESHOW 2.mov
Type: QuickTime Movie
File Size: 3.2 GB
Image Size: 720 x 576
Average Data Rate: 3.4 MB/Second
Compressor: DV - PAL
Quality: Most (5.000)
Above information is obtained in Premiere Pro by selected Properties-option of the submenu when selecting the file.
Hopefully you can use this information but I could upload the original Premiere Pro project over the next few days. If you would be interested in it.
FLA file: http://www.letslearn.it/dropbox/alzheimer.fla

Problem with video export for Pro Tools

I hired a re-recording mixer to mix my short film in 5.1. I successfully exported an OMF, and then set to making a video per his requirements: h264, 720pHD, High Quality.
Initially I chose an h264 YouTube 720p 23.976 preset. The re-recording mixer told me although it would open on his desktop in a quicktime player, he couldn't get it to load into Pro Tools. So, I next created another video with the h264 HD 720p 23.976 preset. And again, he couldn't get it to load.
As the export is quite long, I decided to re-compress the file in Apple Compressor. And here's the weird thing. The exported HD 720p 23.976 video wouldn't even load in compressor (although it plays fine in Quicktime).
Finally I used an Apple TV preset and exported again. 720p, 23.976. And this time, the video loaded both in Pro Tools and would open in Apple Compressor.
What don't I understand? Why the difference between h264 outputs? What would the ideal "preset" be?

I have always found that a simple .dv file is the most user friendly in a ProTools Suite.
I use these in conjunction with OMF exports of audio and it works flawlessly.
I am on a PC so not sure how that impacts in your Mac workflow.

Explorer issue with video swf

Hi can anybody tell me why Internet explorer did not open the video, before I had accept to open this site, in firefox it just open,
I have tried Amara slide show bouilder, and here there is no problem with the swf files in explorer.
I know that I in the internet explorer option can change this irritating bloking, so can anybody tell me why this happened for me
I have visit a lot of internet homepage, where there is a video and where internet explorer did block the site.
I have sent my html file and the swf file.
best regard
kenneth

Hi,
Does the issue occurs with other browser such as Chrome or Firefox?
Please try the following to check the issue:
1. Updating your graphics driver. visit the website of your computer manufacturer to download the latest driver.
2. Disable hardware accelerate to check the issue
Hardware acceleration is a feature in Adobe Flash Player that usually delivers a better video playing experience; however, sometimes it may cause issues.
The option to disable hardware acceleration is only available for certain versions of Adobe Flash Player system plug-in and operating systems (OS).
Follow these steps to see if the option is available:
a. Right-click on the on the video you’re having issues with
b. Click Settings
c. If you see the option Enable hardware acceleration, deselect it. If you don’t see it, the option is not available for you.
d. Click Close
e. Refresh the page and check whether the video is working
Once you disable hardware acceleration, the change will apply across all Internet browsers on your computer.
3. Reset Internet Explorer settings
http://support.microsoft.com/kb/923737
Please understand that reset Internet Explorer to its default configuration. This step will also disable any add-ons, plug-ins, or toolbars that are installed.
4. Disable the security software temporarily and see if it works.
Hope it helps.
Regards,
Blair Deng
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Issue with JPEG Exports

I am unable to use my exported JPEG files in other programs. I have exported my InDesign document pages as JPEGs, and they are available in a folder and open up in Preview. However, when I try to import the saved JPEGs into other programs like powerpoint, they are unavailable for selection. I am using a Mac.
I have tried using the JPEGs in multiple other programs so am thinking the issue is something to do with the export format itself.
Any ideas on how I might be exporting this wrong?

Exported Jpegs not readable by Powerpoint via finder

Issues with video playback, messed up shuffle mode with playlist sharing

I have a Mac (10.4.7) and a PC (XP SP2)... both are running iTunes 7 downloaded on September 12. All of my media is on my PC, and I do playlist sharing with my PowerBook across mu home network. A few issues with iTunes 7 that didn't exist for me in iTunes 6.0.5:
- Video playback is like multicolored TV snow. This happens on my PC as well as when the video is shared to my Mac.
- When sharing the music to my Mac, and I'm listening in shuffle mode, many times the same song will play twice in a row.
- I've only had this happen once so far (in the last 24 hours), but again I was listening to music shared to my Mac. One song played, then started to play again for the second time in a row. The song played for about 15 seconds, then jumped into another song. After that song was over, it jumped back and played the last 15 seconds of the previous song, all while having a completely different song highlighted in iTunes with the track position set to 0:00. It was very, very odd.
Frankenstien PC/PowerBook G4 Mac OS X (10.4.7) Windows XP Pro SP2

The first issue is resolved by http://discussions.apple.com/thread.jspa?threadID=639597&tstart=0
Any other ideas?

MacBook Pro 15 Mid 2009 - Mac OSX 10.10.2 - Any issues with video lagging/audio lagging?

Hello
Current OS and System details below. Have started to experience audio and video lagging when browsing (not effecting audio on music)
Have looked at some forums and it appears to be an issue with some later cards and Mac Book Pros
Any one else experiencing issues? and if so are they resolved? and if so by what manner were they resolved?

Since yo said "an issue with some later cards and Mac Book Pros" I would also post n the MacBook forum
MacBook Pro

H67A-G43 (B3) - Windows 7 64-bit Install issues with Video Card(s)

Specs
Case - CoolerMaster CMP 350 w/500 Watt PSU
Motherboard - MSI H67A-G43 (B3)
Processor - Intel i7-2600
Memory - 16GB (4x4GB) DDR3 1333
Hard Drive - Western Digital Caviar Green 1TB SATA 2
Video - *multiple cards tested
Issue
OS Installation
Video Card - ASUS HD 7850 DirectCUII - Computer POSTs, begins to load Windows 7 setup, freezes on the Windows 7 installer background.
Video Card - GeForce 9300 GE - Computer POSTs, begins to load Windows 7 setup, freezes on the Windows 7 installer background.
Video Card - MSI N430 GT - Computer does not POST.
Video Card - Integrated - Computer boots and completes install of Windows 7 64-bit. Install all drivers, update BIOS to current version. Attempt to boot with video cards listed above with new BIOS, same issues. (First two hang on Windows logo, 3rd no POST.)
Attempted Resolutions
As stated, I have tried 3 different video cards, as well as 2 motherboards, both of them MSI H67A-G43(B3).
We have ordered 2 other new motherboards (one ASUS, one Gigabyte) because we need to get this built for the customer ASAP. However, we have previously used the H67A-G43 boards with no issues. We would like to be able to use these motherboards on future builds. What possible solutions are there for these issues?

Quote from: HU16E on 20-April-12, 03:32:27
Tried a battery removed CMOS clear and reset after the UEFI/BIOS update? Tested with another PSU? Tried with just one RAM stick in the primary dimm slot, or with just two sticks?
Results
1 Stick DDR3 - Freezes in "Starting Windows" screen when video card (HD 7850) installed. Still works correctly with Integrated.
1 Stick DDR3 + swapping out CoolerMaster 500 Watt PSU for "Power" 500 Watt PSU - Freezes in "Starting Windows" screen with video card. Using Integrated video, works correctly.
This is on an unflashed H67A-G43 (B3) new out of the box.

Issues with Video Exporting in CS6

Similar Messages

Maybe you are looking for