Issues with volume button

Have an iPad 2 that's just 2 weeks old. Has been working fine until tonight when I went to turn down the volume...wouldn't turn down, will only turn up. Anyone else had this happen and suggestions to try and fix?
Thanks

Basic troubleshooting from the User's Guide is reset, restart, restore.

Similar Messages

Issue with volume buttons on keyboard

I have a Pavilion g7-1167dx Notebook, using Windows 8.
I've had this problem for a long time, but just got around to trying to fix it. The raise/lower volume buttons on the keyboard usually work fine. However, after a while (a few uses or a few days), when I press either of these buttons, the Volume image will appear on my screen and display the current volume level, but I will be unable to actually change the volume.
To restore their usability, I need to open sndvol32 (or the volume icon on the bottom right of the screen) and change the volume any amount. After doing so, the keyboard volume buttons begin working again.
Any idea what is causing the volume buttons to stop working as I've described?

Hello JasonScando. I understand you're having some trouble with your volume buttons.
I'd like you try reinstalling the sound card's drivers, the HP Quick Launch software, and the HP On Screen Display.
Let me know the result and have a wonderful evening.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

HT204291 Since upgrading to iOS7, i have experienced issues with Airplay button missing

Since upgrading to iOS7, i have experienced issues with Airplay button missing from the control menu as well as in Spotify. It is as if airplay is not runing. A temp fix: Reboot of the ipad mini (Home button+standby) Is there anything permanent?
I have verified that my iPad mini and apple TV is up to date.
Airplay enabled, the network is connected with internet.
It is as if, airplay is a service that just stopped working and has to be restarted again via a reboot.

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Troubleshooting Security Software

Anyone have an issue withe airplay button not being available?

Anyone have an issue withe airplay button not being available?

Since the last pair of updates, my game camera won't pan around in any adventure level, leaving many sub levels off screen. This is happening in all community adventure levels as well as my own on my moon. Also can't seem to decorate my adventure levels without experiencing major glitches, especially with changing the materials. The updates fixed a lot of stuff, but it seems like they trashed some things too.

IdeaPad Z370 and Ubuntu 11.10 64 bit - problem with volume buttons

I recently bought my new Lenovo IdeaPad Z370 without operating system and installed Ubuntu 11.10 64 bit (the pre-installed system was FreeDOS which I decided to remove).
Nearly all is working fine. The only exception are the volume keys: pressing them does start adjusting the volume, but causes a system problem. If I press sound up, the speakers move to immediately to the maximum volume and behave as it I was continuing to press the button.
The same happens when pressing the volume down or sound off buttons. It is then not possible any more to use the keyboard or type anyting, nor change the volume using the touchpad and Ubuntu's speaker symbol. It is also not possible any more to shut down the computer using Ubuntu's virtual shutdown button, but with the real button on the computer.
The touchpad is still working and after putting the computer briefly into standby the problem is solved to the degree that it is possible to use the keyboard etc. again, and the sound volume can be adjusted again with Ubuntu's speaker symbol.
I guess this must be a driver issue that ubuntu 11.1 does not support the buttons.
As well, the one-key-theatre button and the thermal-management button do not work. Pressing them, just nothing happens (except that the light up).
I should mention that installing Ubuntu apparently deleted the partitions including the one-key recovery button. At least this key does now only work like a second power-button. Unfortunately I did not receive the User-guide with the computer but only downloaded from the internet after installing Ubuntu.
I wonder whether apart from adjusting the volume buttons, it might be possible to get the one-key-theatre button and thermal-management-button operational for ubuntu too, and whether the one-key-recovery button could work under ubuntu too. Gparted tells me that I have 2 small partitions of 3.9 GiB each, labeled "extended" and "windows swap", and one of 1.02 GiB which is not in use apart from the main drive of course.

The issue you are encountering is due to driver absence in Linux.
The driver for Linux is not available. Hope, Ubuntu new version have more applications and drivers.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HELP!! Issue with mailto button in PDF

Hi
I have a button in a PDF form that attaches default email (LOTUS NOTES) when clicked. I have my settings in IE set to Lotus Notes as my default client and also in Lotus Notes I have the same settings.
The form however does not work sometimes when the button is clicked, nothing happens. It works fine for me but doesn't on another computer with the same settings.
Is this an issue with the PDF or Lotus Notes? If so any suggestions?
Thanks

Hi
Both machines are running windows XP SP 3
I have done some google-ing the issue but I didn't get any useful information.
I tried it on the second computer again and it says no 'email exits'
Any help on why this is happening will be very useful.
thanks in advance!!

Someone else has a problem with volume button getting stuck?

My volume button gets stuck when I keep pressing it, it's software or hardware issue?

Restore as new, if that fixes the problem it is something in your settings or backup that was causing the issue.
If it does not fix the problem, you have a hardware issue.

Firefox Issue With Back button

I am having an issue with SpryHorizontal Menus in Firefox when using the back button. Even did a tutorial with Lynda.com and found their solution file had the same issue. Would anyone who has had success with 3 levels of submenus care to share a snippet of their code as I cannot find the error and outside help hasn't quite resolved the issue.
My code is following this basic outline
<li><div align="center"><a class="MenuBarItemSubmenu" href="#">Academics</a></div>
      <ul id="Academics">
        <li><a class="MenuBarItemSubmenu" href="#">Departments</a>
            <ul id="Departments">
              <li><a href="../tsc_bustech.htm">Business Technologies</a></li>
    <li><a href="../tsc_communications.htm"><font="11.75px">Communications</font></a></li>
      <li><a href=""../tsc_ethics”/>Ethics</a></li>
              <li><a href="../tsc_finearts_hum.htm">Fine Arts and Humanities</a></li>
              <li><a href="../tsc_math.html">Mathematics</a></li>
              <li><a href="#">Natural Sciences</a>
        <ul id="naturalsciences">
    <li><a href="../tsc_bioscience.html">Biological Sciences</a></li>
      <li><a href="../tsc_physicalscience.html">Physical Sciences</a></li>
    </ul>
          </li>
            <li><a href="../tsc_socialscience.htm">Social and Behavioral Sciences</a></li>
            </ul>
        </li>
Thank you.

Hi Beth,
Just an FYI. Also received another nice piece of information to store in the SpryAssets help file from an online Adobe Certified Course Director:
Thanks for your email! It isn’t often I get a great question like that. I had to do some digging, but I came up with a solution. You might have already worked your way through it, but if not the problem is Firefox’s (and Opera’s) caching that’s causing the issue in question. To fix it, you have to reset the submenu dynamic class names when the user clicks the link (re-caching the page is a bad idea).
This is a pretty simple javascript fix. The problem was so interesting that I posted the fix to my blog. You can check out the solution here: http://www.simpleprimate.com/?p=30 if you haven’t already figured it out.
Maria

Issues with rollover buttons in Indesign CS6

Hi, I was wondering if anyone can shed some light on a issue i'm currently having.
I've produced a interactive map in Indesign, with rollover buttons which triggers an animation - all the buttons and animations seem to be set up correctly and once I export as a SWF they seem to work fine initially, but after a couple of rollovers some of the buttons just stop working. If I refresh the page or reopen the swf file it then starts working again for a period, but again after a few successful rollovers some stop working again. I'm wondering if this is a bug of some sort? Ive also tested the .swf on a different machine and I experience the same issue.
Any help with this would be be much appreciated.

We might be able to help you but you'll have to drop the attitude. We're not Adobe here, but users like you.
You'll need to tell us exactly what you're doing and what's not working for you. By "rollovers," you could mean the change of appearance of a button. You could also be meaning what are sometimes called Show/Hide buttons where clicking a button causes another button to appear. Which is it?
And what kind of output are you attempting? Interactive PDF? SWF (Flash)? DPS?

Buggy issues with keyboard buttons.

Getting constant issues with keyboard keys in Photoshop. Delete key does not delete layer, Fill layer (Option Delete) only works when I change tools. And it does this intermittently. It's very annoying!
Anyone else have these issues? These are just some of the issues that pop up.

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Issues with volume

When I connect my nano to my JawBone speaker, there is a problem with volume. The volume icon appears on screen, but cannot be adjusted.

It also can't be adjusted via the JawBone. It just gets stuck. I have to reset, and it works for while and then the same problem will crop up again.

Anyone had problems with volume button (6th gen)

Volume button appears to act as if stuck - not constantly but in last days more and more - even if I hold down + button (to increase the volume) the volume then instantly reduces (as if I am pressing the - button) ... or I can be listening to music and then volume suddenly reduces (nothing is touching the - volume button).
Any ideas?

This can happen to all of the buttons on this model. Theres is basically a pad on top of each of the clicky parts on the buttons on the inside of the ipod that WILL come off after being used alot, some genius design. When the pad comes off there will be a space between the button on the outside and the clicky part on the inside rendering the button useless. It costs 75$ to replace if it isnt under warrenty and the ipods you get back from the repair are refurbished, which will break even sooner. I've gone through four of the ipod nano 6 gen, i dont abuse it or drop it. Avoid this model and shoot for older ipods. Or simply dont shop at apple at all.

Change song with volume buttons on N8?

When the phone is locked and in my pocket I often want to change to the next song.
Is it possible to remap the volume buttons to do this somehow?

nope
you can only adjust the volume from them (even when the phone is locked something i couldnt do on my 5800 so nice update there) but you can always just use the headset.....
If you found this post or any other psot helpful please press the green kudus star

Spry validation issue with submit button

Hi,
I'm new to Spry but am having an issue getting it to work at all. I created a very simply form (i.e. table with Spry text field and submit button). I've read many articles and been to several forums, but I can't seem to find the issue I'm having. Basically, when I go to preview the page in a browser, the table with the Spy text field and submit button comes up fine, but when I hit the submit button, I see the page refresh and any values I had in the text field disappear, but nothing ever comes up saying "A value is required," which is what I'm looking for. This happens even if I don't have any values in the text field. Below are images of what I'm describing and also the code. I verified that the "Required" check box is checked in the SpryTextField and the submit button action is selected to "Submit Form." My setup is Win 7, DW6, & XAMPP. Any help you can provide would be greatly appreciated.
Before Submit Button pressed:
Browser after button pressed: (same as above but no message saying "A value is required.")
Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
</head>
<body>
test
<table width="600" border="1">
<tr>
    <td><form id="form1" name="form1" method="post" action="">
      <span id="sprytextfield1">
      <label for="test"></label>
      <input type="text" name="test" id="test" />
      <span class="textfieldRequiredMsg">A value is required.</span><span class="textfieldInvalidFormatMsg">Invalid format.</span></span>
    </form></td>
</tr>
<tr>
    <td> </td>
</tr>
<tr>
    <td> </td>
</tr>
<tr>
    <td> </td>
</tr>
<tr>
    <td><form id="form2" name="form2" method="post" action="">
      <input type="submit" name="submit" id="submit" value="Submit" />
    </form></td>
</tr>
<tr>
    <td> </td>
</tr>
</table>
<script type="text/javascript">
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "email");
</script>
</body>
</html>

Do yourself a big favor and don't waste time with Spry Validation. Most modern browsers support HTML5 forms with the required attribute.
If you must placate older browsers, use jQuery validate script. It's lightweight and works when HTML5 support is missing. You can see an example below. If you hit submit with empty form fields, the required fields pop-up with messages. View source in browser to see the code.
HTML5 Form with jQuery Validation
Nancy O.

Issue with nav buttons in an image gallery

Hello,
I'm very new to flash and am using CS4/AS3. I have three image galleries of three images each. The images load dynamically from files on my computer. I've set it up so that when you click on a tab, you see a different set of three images.
The images load properly and it works to click forward to view them (that is, clicking on the image itself or the forward nav arrow). The issue I'm having is with the backward nav arrow. I keep geting an error message "Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found" when I click it.
The backward nav arrow works on the first gallery (egypt gallery) if I click that one first. But it doesn't work on the other two, and if I click back to the Egypt gallery after having been in the other two galleries, the back navigation no longer works in their either.
Basically, I want the user to be able to click on a tab to load the images, and then be able to click back and forth between the images. If they reach the last image in a gallery, I just want it to stop advancing and stay put on the final image, but for the user to be able to click backwards through them if desired. My code is pasted below (I'm sure it's more complicated than it needs to be... just a result of me being a complete novice!)
Any help or suggestions would be very much appreciated. Thanks so much.
stop();
//egypt gallery//
var myloader:Loader = new Loader();
var myrequest:URLRequest = new URLRequest("images1/egypt1.jpg")
var counter:Number=1
var total:int=3;
egypt_mc.addEventListener(MouseEvent.CLICK, cover);
function cover (e:MouseEvent):void{
object1_mc.x=414.15;
object1_mc.y=101.35;
object2_mc.x=520;
object2_mc.y=60;
object3_mc.x=630;
object3_mc.y=60;
left_mc.x=15;
left_mc.y=340;
right_mc.x=680;
right_mc.y=340;
stage.addChild(myloader);
myloader.x = 28;
myloader.y = 175;
myloader.load(myrequest);
myloader2.unload();
myloader3.unload();
myloader.addEventListener(MouseEvent.CLICK, shownextpicture)
function shownextpicture(e:MouseEvent):void{
counter = counter + 1;
if(counter<=total){
myrequest.url="images1/egypt"+counter+".jpg"
myloader.load(myrequest)
right_mc.addEventListener(MouseEvent.CLICK, forward)
function forward(e:MouseEvent):void{
counter = counter + 1;
if(counter<=total){
myrequest.url="images1/egypt"+counter+".jpg"
myloader.load(myrequest)
left_mc.addEventListener(MouseEvent.CLICK, back)
function back(e:MouseEvent):void{
counter = counter - 1;
if(counter>0){
myrequest.url="images1/egypt"+counter+".jpg"
myloader.load(myrequest)
//wikileaks gallery//
var myloader2:Loader = new Loader();
var myrequest2:URLRequest = new URLRequest("images2/wikileaks4.jpg")
var counter2:Number=4
var total2:int=6;
wiki_mc.addEventListener(MouseEvent.CLICK, cover2);
function cover2 (e:MouseEvent):void{
object1_mc.x=410;
object1_mc.y=60;
object2_mc.x=521.35;
object2_mc.y=102;
object3_mc.x=630;
object3_mc.y=60;
left2_mc.x=15;
left2_mc.y=340;
right2_mc.x=680;
right2_mc.y=340;
stage.addChild(myloader2);
myloader2.x = 28;
myloader2.y = 175;
myloader2.load(myrequest2);
myloader.unload();
myloader2.unload();
myloader2.addEventListener(MouseEvent.CLICK, shownextpicture2)
function shownextpicture2(e:MouseEvent):void{
counter2 = counter2 + 1;
if(counter2<=total2){
myrequest2.url="images2/wikileaks"+counter2+".jpg"
myloader2.load(myrequest2)
right2_mc.addEventListener(MouseEvent.CLICK, forward2)
function forward2(e:MouseEvent):void{
counter2 = counter2 + 1;
if(counter2<=total2){
myrequest2.url="images2/wikileaks"+counter2+".jpg"
myloader2.load(myrequest2)
left2_mc.addEventListener(MouseEvent.CLICK, back2)
function back2(e:MouseEvent):void{
counter2 = counter2 - 1;
if(counter2>4){
myrequest.url="images2/wikileaks"+counter2+".jpg"
myloader2.load(myrequest2)
//scientology gallery//
var myloader3:Loader = new Loader();
var myrequest3:URLRequest = new URLRequest("images3/scientology7.jpg")
var counter3:Number=7
var total3:int=9;
scien_mc.addEventListener(MouseEvent.CLICK, cover3);
function cover3 (e:MouseEvent):void{
object1_mc.x=410;
object1_mc.y=60;
object2_mc.x=520;
object2_mc.y=60;
object3_mc.x=629.95;
object3_mc.y=100.8;
left3_mc.x=15;
left3_mc.y=340;
right3_mc.x=680;
right3_mc.y=340;
stage.addChild(myloader3);
myloader3.x = 28;
myloader3.y = 175;
myloader3.load(myrequest3);
myloader.unload();
myloader2.unload();
myloader3.addEventListener(MouseEvent.CLICK, shownextpicture3)
function shownextpicture3(e:MouseEvent):void{
counter3 = counter3 + 1;
if(counter3<=total3){
myrequest3.url="images3/scientology"+counter3+".jpg"
myloader3.load(myrequest3)
right3_mc.addEventListener(MouseEvent.CLICK, forward3)
function forward3(e:MouseEvent):void{
counter3 = counter3 + 1;
if(counter3<=total3){
myrequest3.url="images3/scientology"+counter3+".jpg"
myloader3.load(myrequest3)
left_mc.addEventListener(MouseEvent.CLICK, back3)
function back3(e:MouseEvent):void{
counter = counter - 1;
if(counter>0){
myrequest.url="images3/scientology"+counter+".jpg"
myloader.load(myrequest)

You want to have the trace triggered when the problem occurs, so if the problem occurs when you use your back button, then you want to tie it in to that somehow. I don't know why you are trying to trace all that you show. The main thing you want to find out is why it is not finding the file, which will be defined by whatever value it is trying to use as a url. Try to focus on the data you need to see and not just anything that comes to mind.

Issues with volume button

Similar Messages

Maybe you are looking for