Issues with volume

When I connect my nano to my JawBone speaker, there is a problem with volume. The volume icon appears on screen, but cannot be adjusted.

It also can't be adjusted via the JawBone. It just gets stuck. I have to reset, and it works for while and then the same problem will crop up again.

Similar Messages

Issue with volume buttons on keyboard

I have a Pavilion g7-1167dx Notebook, using Windows 8.
I've had this problem for a long time, but just got around to trying to fix it. The raise/lower volume buttons on the keyboard usually work fine. However, after a while (a few uses or a few days), when I press either of these buttons, the Volume image will appear on my screen and display the current volume level, but I will be unable to actually change the volume.
To restore their usability, I need to open sndvol32 (or the volume icon on the bottom right of the screen) and change the volume any amount. After doing so, the keyboard volume buttons begin working again.
Any idea what is causing the volume buttons to stop working as I've described?

Hello JasonScando. I understand you're having some trouble with your volume buttons.
I'd like you try reinstalling the sound card's drivers, the HP Quick Launch software, and the HP On Screen Display.
Let me know the result and have a wonderful evening.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

AFP issue with volume names

With Mac OS X 10.5 Server, I attempted to create a share point. I think I've found a bug.
I have 3 drives, with names of ServerHD, ServerHD2, and ServerHD3. Creating a share point on ServerHD2 or ServerHD3 fails, with the share point showing up in the list, but selecting it results in a message at the bottom of the Server Admin window of "The selected file system could not be found".
A closer looks at the path shows things like "/Volumes/ServerHD/3/Shared Items/Music" - note the / between ServerHD and 3 - there isn't a slash in the drive name.
Renaming the drives with a space before the number fixes the problem, but I still have the failed share points in the list, and I can't find a way to make the bad ones go away.

I've had essentially the same issue and thought that this may repair the issue in terms of creating a folder and then unsharing and I've not had and success. Seems like we may need to resort to other means.
The method I used was to actually use dscl and then navigate into /Local/Default/SharePoints and to delete out the erroneous shares. Seems to have done the trick.

MBP early 2007 model having issues with volume and brightness control keys (f1-f9)

My MBP, early 2007 (came with tiger 10.4 in the box) and now running Snow Leopard 10.6.8 is having some weird problems with its f1-f9 keys.
For about 2 weeks now I have noticed that I cannot change the brightness and volume (especially) using these keys.
The layout of the keys on my MBP are as attached:
I tried to google the problem and tried a few diy fix-its, however nothing seems to work... and there seems to be no clear answer either. One day, during these two weeks it suddenly worked for about 2 minutes then stopped again and hasn't worked since.
Anyone experienced any similar problems? or have any idea what I can do to fix it?
As a last resort, I would eventually get a wireless keyboard to use with the MBP.

dominicandsumi wrote:
Thanks tjk, I tried that but it did not help. However over these last 2 days I noticed something more.
When I go to the keyboard setting, the 'use all f1 keys..." was off (as it was supposed to be) and then I click to turn it on and then off again and then the keys are ok and working perfectly till...
The next time I shut down and restart my computer, the key problem is back again. And again I do the same procedure above to fix it and so on...
Hmmm, it sounds like a corrupt preference.
Open Console and let's see if there's anything in there to help us.

Issues with volume button

Have an iPad 2 that's just 2 weeks old. Has been working fine until tonight when I went to turn down the volume...wouldn't turn down, will only turn up. Anyone else had this happen and suggestions to try and fix?
Thanks

Basic troubleshooting from the User's Guide is reset, restart, restore.

Volume issues with GE60 Apache Pro-003

I recently picked up the new GE60 Apache Pro notebook, and I've been running it for about a week now. I should of course mention that I also did a clean windows install after adding an SSD to the system (and now can't figure out how to add back that cool MSI panel that was there when I first got the system).
Anyway, I've noticed that there seems to be volume issues with the system no matter WHAT kind of settings I tweak, or drivers I try to use. With all sliders up at maximum, the volume levels still never seem to surpass around 50% (from observing the volume gauges in the Windows Volume mixer panel). My previous notebook's speakers put out significantly higher volume, and was also able to put out far more power to my headphones (Audio Technica ATH-M50).
Any possible ideas for the cause and solution to this problem? Thanks in advance, and let me know if there is anything else I need to mention.

Quote from: darkhawk on 02-April-14, 20:44:14
What are you using to gauge the '50%'? MP3's? Windows sounds? or what?
Pretty much everything. Music, games, online videos... According to the volume mixer, the audio levels never seem to pass 50%. The grey bar bounces to the peak, but the green bar never seems to pass the 50% level. It's as if there's some sort of limiter in place I'm not aware of. And since I reformatted the notebook as soon as I got it, I was never able to see if the volume control worked correctly before the reformat.

Is anyone having volume issues with the new Iphone 4S?

Is anyone having volume issues with the new Iphone 4S?

Yes, the volume on my iPhone 4s will max out without me touching any button or setting. When opening mail, for instance, the ringer icon will appear and the volume level goes to max volume - and I'm not touching the volume buttons. It seems to happen randomly, at least I can't identify a pattern, but thankfully it doesn't happen all the time, but at least once a day.
Anyone else seen this?

Commvault issue with JobResults on NSS volume

Hi all, we see an issue with Commvault 9R2 (sp10) using a Linux i-data agent client on OES2SP3 x64 backing up (clustered) NSS volumes. For speed we, this case, do not want to use a NSS i-data agent, so we just leverage the Linux i-data agent.
The issue is that if we use the Linux i-data agent and the jobresults directory is also hosted on the same NSS volume that's being backed up we get an error on failures.cvf
"Could not open failures file [/media/nss/LBAPOA/galaxy/JobResults/2/268/Failures.cvf] error number [19, No such device]. The backup would continue but this would affect the ability of reattempting the failed file backup during next incremental backup. A full backup is recommended to back up all files. Check the following: 1. The account this product uses has permissions to the product's install directory. 2. Sufficient disk space is available for the Job Results directory. If the problem persists, please upload log files from CommServe, MediaAgent and Client and contact your vendor's support hotline with the job ID of the failed job."
If we (for testing only) move only the jobresult directory to an ext3 volume we do not see the issue.
Has someone seen (and hopefully fixed) this issue before? My guess it's a Commvault issue, but just before we open a SR with them I would like to now if there's a good guess to solve this:)

sveld,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Having issues with music volume after syncing with iCloud, Having issues with music volume after syncing with iCloud

Has anyone had issues with their music volume after syncing with iCloud ?

There have been several posts here and on the iphone site about this.
The jury is still out what the fix will be. Some posts say it's a problem with the metadata and the orientation data contained there-in. I can not confirm that.
I do know that when I take a landscape screen snap, the orientation is wrong when I email or upload the photo to my computer.

Hi All. My iPad 4 just started having issues with the volume. On either Bluetooth or the iPad Speaker, anything I'm watching or listening to drops the sound to just barely hearing it and then, about 2 seconds later, it comes back.

Hi All,
I tried to search through the community, but with the sheer volume of posts, I didn't find anything that seemed like the same issue.
My iPad 4 just started having issues with the volume. On either Bluetooth or the iPad Speaker, anything I'm watching or listening to drops the sound to just barely hearing it and then, about 2 seconds later, it comes back.
I haven't tried wired ear phones, but I am sure they'll be the same way.
It's very random, but consistent enough to happen several times per day.
Thanks for any help that anyone can provide.
I have restarted it and also did a Hard Reboot and it didn't help.
Thanks Again,
Scott P.

Well there you go, when you advertise it just be sure to say that you can't even see the scratches at half brightness and see how it goes.
Of course you are saying you want $500 for one with many scratches on the screen, has been dropped, but the scratches aren't visible at half brightness, and has no warranty. Or I can buy a refurbished iPad 4 WiFi 32 GB directly from Apple with no scratches and a one year warranty for $499. http://store.apple.com/us/product/FD514LL/A/refurbished-ipad-with-retina-display -wi-fi-32gb-white-4th-generation
Why would I buy yours?
I wouldn't pay more than $300 for a used model with your specs in perfect condition. But yours is far from perfect. I think your high point is $250 which is why I said 50%.

My iPod touch is having a little issue with the volume. When I plug in my headphones the volume works fine. When there aren't any headphones plugged in, no sound comes out from my iPod. When I go to turn up the volume, it still says headphones. Any tips?

My iPod touch is having a little issue with the volume. When I plug in my headphones the volume works fine. When there aren't any headphones plugged in, no sound comes out from my iPod. When I go to turn up the volume, it still says headphones. I tried restarting it a few times, nothing worked. I looked up many tutorials, and still nothing did the trick. Any tips?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Volume issues with third-party tele-conference service

A client is requried to join a conference call hosted by third-party Genesys Conferencing (866.436.3797). My client accesses the teleconference through the speakerphone of their Cisco SPA525G2, lcoated in a Board Room.
They have a UC-540 with the next to lates firmware and they have no other volume issues with any call on this or any other speakerphone.
Any ideas?

You could try this link here it will show you how to use the HH off another router as a slave and still be able to use BB talk
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

I have a new iphone6+ and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

I have a new iphone6+ and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

Sorry if this is too basic or confusing
Apparently in iOS 8 there are different volume settings for different applications
The setting on the home screen does not carry over to Pandora for example and it is different ( or at least appears to be) for the in-car experience.
So I would try to stream the music when not in the car - see if you can turn the volume up and then try again in the car
Please let us know what happens
Thanks

Having issues with System Volume Information

Hi All.
I hjave a Ps script that I use to wipe off data from SQL servers as aprt of a decom process.
The script is as follows.
get-childitem F:\ -include *.ldf,*.mdf,*.ndf,*.bak,*.trc,*.txt,*error*,*sqlagent*,*system_heal*,*xel*,*bak*,*logs*,*.mdmp*,*cer* -exclude *System* -recurse | foreach ($_) {remove-item $_.fullname -Force }
At the moment, it runs into issues with a folder. I would either like to delete the folder as well or actually exclude it. Also as an improcement to the script, I would want it to display the list of files it has deleted.
The error that I get is as follows.
remove-item : Access to the path 'F:\System Volume Information' is denied.
At line:1 char:155
+ ... foreach ($_) {remove-item $_.fullname -Force   }
+                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : PermissionDenied: (F:\:String) [Remove-Item], UnauthorizedAccessException
    + FullyQualifiedErrorId : RemoveItemUnauthorizedAccessError,Microsoft.PowerShell.Commands.RemoveItemCommand
Confirm
The item at F:\ has children and the Recurse parameter was not specified. If you continue, all children
will be removed with the item. Are you sure you want to continue?
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"):
Thanks in advance.

Hi MrFlinstone,
I’m writing to just check in to see if the suggestions were helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support

Unable to log into iMessage and intermittent issues with FaceTime

Late 2011 MacBook Pro, OS X 10.8.4. I'm an admin level Windows guy but a relatively new (and otherwise very pleased) convert to Mac OS.
This morning Messages started repeatedly prompting me for my iMessage password and FaceTime has starting working only intermittently. Both work fine from my iPad and iPhone 5. Both have been working from my MacBook Pro for months.
This morning when I tried to fire up Messages on the MacBook I got an error saying "The server encountered an error processing registration". After doing some Googling, I noticed that many folks said that when they had this problem they also had an issue with FaceTime. I confirmed that FaceTime was indeed giving me the same error as iMessage. After trying some solutions from past threads that didn't work, I rebooted. Now instead of throwing an error, Messages just keeps asking me for my iMessage password again and again. FaceTime works occasionally but sometimes when I get a call and click answer, I get "call failed" as my iPhone and iPad continue to ring and then I'm asked to re-enter my password on the MacBook. If I enter my password it just sits and spins. If i quit FaceTime and start it again, it'll usually log in successfully but calls may or may not work (following the same pattern I just mentioned).
The odd thing to me is that when I tested FaceTime on my iPad, I got notifications on my iPad and iPhone and my primary and alternate email address were now registered with FaceTime. They have been for over a year so I'm not sure why I'm getting those notifications again.
I'm able to log into the Mac App store without a problem using the same AppleID
What I've tried so far based on Google results:
1. In Keychain Access, reset my default keychain - No improvement
2. In Keychain Access, selected Keychain First Aid, repaired and verified - No improvement
3. On my iPad, turned iMessage off and back on - No improvement, though iMessage on the iPad still works fine
4. Confirmed that my primary and secondary AppleID email addresses and password are correct. The email address associated with my AppleID is not associated with any other AppleIDs.
Thanks!

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Restart your broadband device and your router, if different. You may have to skip this step if you don't control those devices.
Step 3
From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or obviously invalid, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 4
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 5
From the menu bar, select
 ▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 6
Select from the menu bar
 ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 7
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 8
Boot in safe mode and log in. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, reboot as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but didn't work when you booted out of safe mode, stop here and post your results.
Step 9
Reset the NVRAM.
Step 10
Reinstall OS X.
Step 11
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

Issues with volume

Similar Messages

Maybe you are looking for