Issues with vpn connection thru ATT DSL

Hi I hope someone can help me out...
At work we use Cysco VPN Client Verstion 4.8.02.0010
Everyone (about 18 people) can connect to it from their homes. For some reason I am the only member who can not connect.
I am tryihg to connect Via ATT DSL and Cysco VPN Client shows that I am connected, however,
I have no access to any of the networks from work.
I have tried connecting using Cox Cable from a friend's home and it connects just fine.
I have read many threads online that indicate that this is a common occurance with ATT DSL users but I have not found
the fix.
I am using modem/router type 2701 HG-B
Any feedback will be greatly appreciated.
Thank you,

Make sure the encrytpion and parameters such as VPN group are negtotiated properly between the client and the server. Refer http://cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a00800949c5.shtml for most commonly occuring VPN issues . Contact ATT for configuring their servers.

Similar Messages

Issues with WiFi connection to Deskjet 3545

Hi,
I have number of issues with WiFi connection to my new Deskjet 3545 AIO:
1. Printer is not able to get IP address automatically from home WiFi router (all other devices get IP with no problem). Using WPS allow printer to register in network but after switching off, WPS setting is not stored, so I have to do it again. This I was able to solve with manual entering of IP address, netwrok mask, DNS and gateway address.
2. Official HP software installed from HP site was able to find printer for 3dattempt, and it started to work. But after a while, "HP utility" program loose connection to printer, so I can not see any parameters, and I get "can not find printerä message when start to to print. After a some time (minutes to hours), whithout any action from my side, connection to printer seems to be restored, so I can see printer parameters in "HP utility" and printing is started.
3. Official HP software installed from HP site on PC (Windows 7) is not able to find printer on WiFi at all, works only with USB.
All this is disaponinting and unexpected, as my office HP LaserJet Pro 400 Color works perfect.

Hi @DmiBro,
Welcome to the HP Forums!
I see that you are having some wireless issues with your HP Deskjet 3545 to your Mac OS X 10.10 and Windows 7 computers. I am sorry to hear this, but I am happy to help!
I would recommend the following guides:
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute.... (The solutions for OS X v10.8 Mountain Lion and OS X v10.9 Mavericks will work on Mac OS X 10.19 Yosemite.)
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
HP ENVY 4500 and HP Deskjet Ink Advantage 3540 e-All-in-One Printer Series - Printer Does Not Mainta....
Tips for troubleshooting wireless connection issues
The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
Hope this information is helpful, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Issues with my connection when gaming (Insurgency)

Hello,
I just bought the MSI GT72 2QE. I am very pleased with de specs like the Geforce GTX 980m and the i4710hq but there is an issue that is bothering me some days now. When i am playing my beloved game Insurgency, i get ping spikes all the time. So i followed up some instruction on uninstalling the Killer software suite and just installing the drivers when i encountered the next problem. My Killer Wireless-n/a/ac 1525 Wireless Network Adapter couldn't find the drivers in the 'drivers only' package. But i did my best to find other drivers and accomplished after 5 hours full of frustration. So that is done but still doesn't solve my problem.
I don't know what to do anymore and I'm starting to think that maybe my Killer Wireless-n/a/ac 1525 Wireless Network Adapter is the issue. Maybe this is a hardware issue. I contacted the store where i bought it and they will contact me in 48 hours with a possible solution but the guy said that after all my effort it seems like a hardware issue indeed. You guys are my last hope or my laptop will be gone for 3 weeks at the factory.
Video of ping:
nl.tinypic.com/r/ztisd1/8
I hope someone has the solution.
Excuse me for my incorrect English, it's not my native language.
Bye!

Thanks for your reply.
I'm glad (and I'm not glad for the others..) that I'm not the only one. But it's not because there are more devices connected to my router because I am the only one now and I'm still having this problem while my other laptop doesn't have any problems at all. I've tried everything so far now. Resetting my router, restarting my router, reinstalled windows, reinstalled drivers, got rid of the software suite, turned off firewalls, virusscanners etc. Everything.
I thought it was only with Insurgency but it's also bugging me with Battlefield 4.
So i have tried and done everything i could find on every forum on the internet. Still I don't get the download/upload/connection I am used to when using wireless. When i am in my room, which is 10m away from the wireless router, my download speed is max 1200 kb/s where I would easily get 2300 kb/s. Also when playing online games I am having big issues with my latency/ping. It goes from 60 to 200 to 400 and back every 15/20 seconds. I also own a Asus laptop and I don't have any issues at all with the wireless connection. When I am in my room there are no problems at all. I am starting to think that the Killer Wireless adapter is just a f*cked up thing. I bought a laptop (GT72 with 980m) for €2300 but I am having all these issues with the connection. It makes me really frustrated.
Longer vid of ingame netgraph:
nl.tinypic.com/r/97mjae/8
I am hoping that there is something that solves my issues. I'm starting to think that another wireless network adapter from another brand is the only option. Is there an option to change the wireless network adapter on my laptop because I will if I can. This piece of sh*t needs to be replaced.
Bye

Issues with ODI connection to Hyperion Financial Management

Hi,
I am having some issues with ODI connection to Hyperion Financial Management. ODI and Financial management are setup on different machines.
The ‘Cluster(Data Server)’ name in Topology is given as ‘hfm03cl’. On reverse-engineering a model it gives the following error:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 38, in ?
com.hyperion.odi.common.ODIHAppException: Error occurred in driver while connecting to Financial Management application [HFM1] on [hfm03cl] using user-name [admin].
at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
When HFM is installed on the same machine, it works fine. How does ODI identify a cluster on a different machine? Do I have to give the machine name along with the cluster name? If so, what is the format?
Thanks,
Su

You will need to have the HFM client installed on any machine that will be running ODI (i.e. Designer or Agent) that will be executing connections to an HFM server.
Once you have the HFM client installed, see if you can actually connect to HFM from that machine using the HFM client.
Couple of other thing, in the Physical Schema, have you set the Application Catalog and Work Catalog to the same HFM application?
Also, when you are reversing, are you using the local agent or one you have installed using agentservice?
geeo

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now?

My itunes account shuts down for no reason. It wont recognize my iphone and there is an issue with network connectivity and itunes. I have already reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done. Ideas??

My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

TS1398 After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise. Thank you.

After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. I went through support page and done with "Reset Network settings" too but it doesn't help. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise.
It works fine in LTE network. The problem is with WIFI only.
Thank you.

Hey Siddh.s!
Here is an article that will help you troubleshoot this issue with your Wi-Fi connections:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using the Apple Support Communities. Have a good one!
-Braden

After upgrading on ios 6 i have problems with vpn connection..pls help if someone have the same problem

problem with vpn connection after upgrading on ios6.pls help

I've never been able to share FaceBook posts nor seen the option using the iOS FaceBook app regardless the FaceBook app and iOS version. I can Like and I can Comment, and if I select a link or video to view under iOS 6, I can use the Share option for the link or video, but not for a post.

Nokia C7 - Problem with VPN Connection over WLAN

Hello,
today I installed Nokia VPN Client 44.01(5) for Belle.
Before this update I used the following configuration: I set two SIP-profiles up and for each profile a own VPN-connection. One for connecting over radio and one for connecting over WLAN or hotspots.
So over all I had three kinds of connections or connection groups to choose: "Internet" with the radio and home wlan connections, "Intranet" for the VPN-connection over radio and "Intranet over WLAN" for VPN-connections over other WLANs.
The advantage of this configuration was that I could use the SIP-profile depending on my location and the phone had not to use the "standard" VPN-connection ("Intranet") over radio.
Now after the update I have the problem that I can't connect to my VPN over WLAN at all. Not with the SIP profile and not manually over the internet browser. There is always the notification "Connection Problem".
I tried also to put the "VPN over WLAN access point" from the "Intranet over WLAN"-group to the "Intranet"-group and gave it the first priority, but that doesn't helped too.
Does someone of you had or have the same kind of problem or otherwise has any clue about that?
Any help is very much appreciated!
Thank you in advance! I hope that I described my problem clearly.
Greetings
unsys

testing with the faceplate removed and into the master socket witha brand new filters result's below . I tried the quiet line test and it seems silent so no issues there. Can anyone see an issue, I've posted the noise results etc as well with the faceplate removed. (using a butter knife cause i'm just out of bed and tools are in the garage!)
0.7 Mbps
0 Mbps
1 Mbps Max Achievable Speed
Download speedachieved during the test was - 0.7 Mbps For your connection, the acceptable range of speeds is 0.2 Mbps-1 Mbps. Additional Information: Your DSL Connection Rate :1.06 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM) IP Profile for your line is - 0.75 Mbps
System Up Time 00:11:28
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
WAN
PPPoA
6657
9689
0
2806
19425
00:10:58
LAN
10M/100M
28652
22350
0
22356
5418
00:11:24
WLAN
11M/54M/300M
0
0
0
0
0
00:11:11
ADSL Link
Downstream
Upstream
Connection Speed
1056 kbps
448 kbps
Line Attenuation
49.0 db
27.0 db
Noise Margin
10.6 db
20.0 db

Issues with Infinity - Connection Speed & Other Pr...

Hi all,
I had Infinity installed on 2nd November. Besides some issues with BT mixing up delivery addresses the installation by Kelly Comms went smoothly, and was setup within 45 mins.
Initial speeds were very good, achieving 74Mb/s Down & 18Mb/s Up with a Ping/Latency of 5ms Excellent really considering the sub 5Mb/s I was used to with ADSL. The high connection speeds remained over the weekend until about 4pm on November 5th. I found that the Openreach Modem had lost connection (flashing DSL light) and my HH3 Broadband light was a steady orange. I left this for a while before picking up my landline to call customer services only to find that my line was dead with no dial tone.
Broadband eventually came back on service later that afternoon, but at a much lower speed of 43Mb/s Down, and an almost impossibly slow 0.97Mb/s Up. Ping/Latency has also slowed to around 20ms. During the evening I managed to get through to customer services in India, who were able to start dealing with the fault on my phone line.
Initially I was told it would be the 12th of November that the problem with the phone line would be resolved. Fortunately enough it was then fixed the following morning by an apparent engineer visit. I was unaware of this action until later in the day, but had noticed before leaving for work that Broadband was yet again down.
So to cut a long story short: I have a phone line that works, but a big reduction in connectivity speed especially upstream speed. Should I be contacting BT to investigate yet another potential problem bearing in mind that I am still within the supposed '10 day training' window.
(All speed tests have been conducted via a PC connected by ethernet directly to the HH3)
If anyone can advise me it would be much appreciated.

Hi Tidycarrot,
Welcome to the Forum. What was the speed estimate given to you when you signed up to the service? If the speeds you are see are well below that estimate, send me in your details using the link below and I'll run a few test on you line from here.
http://bt.custhelp.com/app/contact_email/c/4951
Thanks
Paddy
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Iphone 4S issues with wifi connection related to 8.2?

I haven't had issues with this before and have had my phone for 4 months. Suddenly this morning I was alerted I am almost at my data limit and I still have 14 days to go! I noticed my phone wasn't connected to my home wifi! I tried to connect several times and it told me the password was wrong. I know it was right so I restarted my phone, router, and modem. I was able to connect but had to leave for work. When I got to work, I connected to the wifi as well in an attempt to not go over my data. My phone connects, then I look at it a while later, and it says 3G again. I googled the issue and found a lot of people talking about the same problem but it all seems to be from last year. Anyone else having this problem suddenly? I have Sprint.

Hello Elita One,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iPhone is dropping different Wi-Fi networks after being connected, I'd like you to please reset your network settings by following the directions outlined below.
Reset your Network Settings. Tap Settings > General > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you’ve used before.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
Have a good one,
Alex H.

AAA issues with VPN and IPCP?

Hi,
I have been struggling to find a solution as to why my L2TP tunnel comes up, but, no ip through IPCP is working. I have a few third party VPN providers that I can connect to with no problem. My config is solid as far as the Virtual-PPP interface is concerned. So, as far as the AAA is concerned, here are a few commands that I have used:
aaa new-model
aaa authentication login local_auth local
aaa authentication ppp default none
So, here is the revelant debugs:
008940: *Jan 7 15:08:05.543 MDT: Vp1 LCP: Timeout: State Listen
008941: *Jan 7 15:08:05.543 MDT: AAA/AUTHOR (00000007): Method list id=0 not configured. Skip author
008942: *Jan 7 15:08:05.543 MDT: Vp1 PPP: Authorization NOT required
008943: *Jan 7 15:08:05.543 MDT: Vp1 PPP: No remote authentication for call-out
008944: *Jan 7 15:08:05.543 MDT: Vp1 AAA/AUTHOR/LCP: Authorization succeeds trivially
008945: *Jan 7 15:08:05.543 MDT: Vp1 LCP: O CONFREQ [Listen] id 142 len 10
008946: *Jan 7 15:08:05.543 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
Cisco3825#
008947: *Jan 7 15:08:07.559 MDT: Vp1 LCP: Timeout: State REQsent
008948: *Jan 7 15:08:07.559 MDT: Vp1 LCP: O CONFREQ [REQsent] id 143 len 10
008949: *Jan 7 15:08:07.559 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
Cisco3825#
008950: *Jan 7 15:08:09.575 MDT: Vp1 LCP: Timeout: State REQsent
008951: *Jan 7 15:08:09.575 MDT: Vp1 LCP: O CONFREQ [REQsent] id 144 len 10
008952: *Jan 7 15:08:09.575 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
Cisco3825#
008953: *Jan 7 15:08:11.591 MDT: Vp1 LCP: Timeout: State REQsent
008954: *Jan 7 15:08:11.591 MDT: Vp1 LCP: O CONFREQ [REQsent] id 145 len 10
008955: *Jan 7 15:08:11.591 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
Cisco3825#
008956: *Jan 7 15:08:13.607 MDT: Vp1 LCP: Timeout: State REQsent
008957: *Jan 7 15:08:13.607 MDT: Vp1 LCP: O CONFREQ [REQsent] id 146 len 10
008958: *Jan 7 15:08:13.607 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
008959: *Jan 7 15:08:13.691 MDT: Vp1 LCP: I CONFREQ [REQsent] id 0 len 8
008960: *Jan 7 15:08:13.691 MDT: Vp1 LCP: AuthProto PAP (0x0304C023)
008961: *Jan 7 15:08:13.691 MDT: Vp1 LCP: O CONFACK [REQsent] id 0 len 8
008962: *Jan 7 15:08:13.691 MDT: Vp1 LCP: AuthProto PAP (0x0304C023)
008963: *Jan 7 15:08:13.691 MDT: Vp1 LCP: State is Open
008964: *Jan 7 15:08:13.691 MDT: Vp1 PPP: Phase is AUTHENTICATING, by the peer
Cisco3825#
008965: *Jan 7 15:08:13.691 MDT: AAA/AUTHEN/PPP (00000007): Pick method list 'default'
008966: *Jan 7 15:08:13.691 MDT: Vp1 LCP: I CONFREJ [Open] id 146 len 10
008967: *Jan 7 15:08:13.691 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
008968: *Jan 7 15:08:13.691 MDT: Vp1 LCP: O CONFREQ [ACKsent] id 147 len 4
008969: *Jan 7 15:08:13.775 MDT: Vp1 LCP: I CONFACK [ACKsent] id 147 len 4
008970: *Jan 7 15:08:13.775 MDT: Vp1 LCP: State is Open
008971: *Jan 7 15:08:13.775 MDT: AAA/AUTHEN/PPP (00000007): Pick method list 'default'
Cisco3825#
008972: *Jan 7 15:08:23.783 MDT: Vp1 AUTH: Timeout 1
Cisco3825#
008973: *Jan 7 15:08:33.799 MDT: Vp1 AUTH: Timeout 2
Cisco3825#
008974: *Jan 7 15:08:43.815 MDT: Vp1 AUTH: Timeout 3
Cisco3825#
008975: *Jan 7 15:08:53.831 MDT: Vp1 AUTH: Timeout 4
Cisco3825#
008976: *Jan 7 15:09:03.847 MDT: Vp1 AUTH: Timeout 5
Cisco3825#
008977: *Jan 7 15:09:07.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008978: *Jan 7 15:09:13.864 MDT: Vp1 AUTH: Timeout 6
Cisco3825#
008979: *Jan 7 15:09:17.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008980: *Jan 7 15:09:23.880 MDT: Vp1 AUTH: Timeout 7
Cisco3825#
008981: *Jan 7 15:09:27.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008982: *Jan 7 15:09:33.896 MDT: Vp1 AUTH: Timeout 8
Cisco3825#
008983: *Jan 7 15:09:37.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008984: *Jan 7 15:09:43.912 MDT: Vp1 AUTH: Timeout 9
Cisco3825#
008985: *Jan 7 15:09:47.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008986: *Jan 7 15:09:53.928 MDT: Vp1 AUTH: Timeout 10
Cisco3825#
008987: *Jan 7 15:09:57.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008988: *Jan 7 15:10:03.944 MDT: Vp1 AUTH: Timeout 11
008989: *Jan 7 15:10:03.944 MDT: Vp1 PPP: Sending Acct Event[Down] id[7]
008990: *Jan 7 15:10:03.944 MDT: AAA/ACCT/EVENT/(00000007): NET DOWN
008991: *Jan 7 15:10:03.944 MDT: AAA/ACCT/NET(00000007): Method list not found
008992: *Jan 7 15:10:03.944 MDT: AAA/ACCT(00000007): del node, session 4
008993: *Jan 7 15:10:03.944 MDT: AAA/ACCT/NET(00000007): free_rec, count 0
008994: *Jan 7 15:10:03.944 MDT: AAA/ACCT/NET(00000007) reccnt 0, csr FALSE, osr 0
008995: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Update Vp1
008996: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Vp1 [pre-sess] (rx/tx) base 2114/15028 pre 15468/32490 call 15468/32490
008997: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Vp1 [pre-sess] (rx/tx) adjusted, pre 13354/17462 call 0/0
008998: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Update Vp1
008999: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Vp1 [sess] (rx/tx) base 2114/15028
Cisco3825# pre 15468/32490 call 15468/32490
009000: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Vp1 [sess] (rx/tx) adjusted, pre 13354/17462 call 0/0
009001: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Deregister Vp1
009002: *Jan 7 15:10:03.944 MDT: Vp1 PPP: Phase is TERMINATING
009003: *Jan 7 15:10:03.944 MDT: Vp1 LCP: O TERMREQ [Open] id 148 len 4
009004: *Jan 7 15:10:03.944 MDT: AAA/ACCT/EVENT/(00000007): CALL STOP
009005: *Jan 7 15:10:03.944 MDT: AAA/ACCT(00000007) reccnt 0, osr 0
009006: *Jan 7 15:10:04.028 MDT: Vp1 LCP: I TERMACK [TERMsent] id 148 len 4
009007: *Jan 7 15:10:04.028 MDT: Vp1 LCP: State is Closed
009008: *Jan 7 15:10:04.028 MDT: Vp1 PPP: Phase is DOWN
009009: *Jan 7 15:10:04.028 MDT: Vp1 PPP: Phase is ESTABLISHING, Passive Open
009010: *Jan 7 15:10:04.028 MDT: Vp1 LCP: State is Listen
Cisco3825#
009011: *Jan 7 15:10:06.024 MDT: Vp1 LCP: Timeout: State Listen
009012: *Jan 7 15:10:06.024 MDT: AAA/BIND(00000009): Bind i/f Virtual-PPP1
009013: *Jan 7 15:10:06.024 MDT: AAA/ACCT/HC(00000009): Register Vp1 100Mbit/s, poll every 5m 0s
009014: *Jan 7 15:10:06.024 MDT: AAA/ACCT/HC(00000009): Update Vp1
009015: *Jan 7 15:10:06.024 MDT: AAA/ACCT/HC(00000009): Vp1 [init-sess] (rx/tx) base 15474/32498 pre 15474/32498 call 15474/32498
009016: *Jan 7 15:10:06.024 MDT: AAA/ACCT/HC(00000009): Vp1 [init-sess] (rx/tx) adjusted, pre 0/0 call 0/0
009017: *Jan 7 15:10:06.024 MDT: AAA/ACCT/EVENT/(00000009): CALL START
009018: *Jan 7 15:10:06.024 MDT: Getting session id for NET(00000009) : db=6902396C
009019: *Jan 7 15:10:06.024 MDT: AAA/ACCT(00000000): add node, session 6
009020: *Jan 7 15:10:06.024 MDT: AAA/ACCT/NET(00000009): add, count 1
009021: *Jan 7 15:10:06.024 MDT: Getting session id for NONE(00000009) : db=6902396C
009022: *Jan 7 15:10:06.024 MDT: AAA/AUTHOR (0000
Cisco3825#0009): Method list id=0 not configured. Skip author
009023: *Jan 7 15:10:06.024 MDT: Vp1 PPP: Authorization NOT required
009024: *Jan 7 15:10:06.024 MDT: Vp1 PPP: No remote authentication for call-out
009025: *Jan 7 15:10:06.024 MDT: Vp1 AAA/AUTHOR/LCP: Authorization succeeds trivially
009026: *Jan 7 15:10:06.024 MDT: Vp1 LCP: O CONFREQ [Listen] id 149 len 10
009027: *Jan 7 15:10:06.024 MDT: Vp1 LCP: MagicNumber 0x1A23E698 (0x05061A23E698)
009028: *Jan 7 15:10:06.108 MDT: Vp1 LCP: I CONFREJ [REQsent] id 149 len 10
009029: *Jan 7 15:10:06.108 MDT: Vp1 LCP: MagicNumber 0x1A23E698 (0x05061A23E698)
009030: *Jan 7 15:10:06.108 MDT: Vp1 LCP: O CONFREQ [REQsent] id 150 len 4
009031: *Jan 7 15:10:06.192 MDT: Vp1 LCP: I CONFACK [REQsent] id 150 len 4
Cisco3825#
009032: *Jan 7 15:10:07.356 MDT: Vp1 PPP: Outbound ip packet dropped
009033: *Jan 7 15:10:08.104 MDT: Vp1 LCP: Timeout: State ACKrcvd
009034: *Jan 7 15:10:08.104 MDT: Vp1 LCP: O CONFREQ [ACKrcvd] id 151 len 4
009035: *Jan 7 15:10:08.188 MDT: Vp1 LCP: I CONFACK [REQsent] id 151 len 4
Cisco3825#
009036: *Jan 7 15:10:10.120 MDT: Vp1 LCP: Timeout: State ACKrcvd
009037: *Jan 7 15:10:10.120 MDT: Vp1 LCP: O CONFREQ [ACKrcvd] id 152 len 4
009038: *Jan 7 15:10:10.204 MDT: Vp1 LCP: I CONFACK [REQsent] id 152 len 4
Cisco3825#show
009039: *Jan 7 15:10:12.136 MDT: Vp1 LCP: Timeout: State ACKrcvd
009040: *Jan 7 15:10:12.136 MDT: Vp1 LCP: O CONFREQ [ACKrcvd] id 153 len 4
009041: *Jan 7 15:10:12.216 MDT: Vp1 LCP: I CONFACK [REQsent] id 153 len 4
Cisco3825#show l2tp
009042: *Jan 7 15:10:14.152 MDT: Vp1 LCP: Timeout: State ACKrcvd
009043: *Jan 7 15:10:14.152 MDT: Vp1 LCP: O CONFREQ [ACKrcvd] id 154 len 4
009044: *Jan 7 15:10:14.232 MDT: Vp1 LCP: I CONFACK [REQsent] id 154 len 4
Cisco3825#show l2tp
L2TP Tunnel and Session Information Total tunnels 1 sessions 1
LocTunID RemTunID Remote Name State Remote Address Sessn L2TP Class/
Count VPDN Group
37822 1 xxxxxxxxxxxx est xxx.xxx.xxx.xxx 1 l2tp_default_cl
LocID RemID TunID Username, Intf/ State Last Chg Uniq ID
Vcid, Circuit
124 1 37822 1, Vp1 est 00:02:03 1
Here are a couple things I noticed:
009001: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Deregister Vp1
008990: *Jan 7 15:10:03.944 MDT: AAA/ACCT/EVENT/(00000007): NET DOWN
I don't have this issue with other providers. I don't have the whole radius / tacacs things setup as it's not necessary for our needs.
Ideas?
Thanks for the help.
Jason

Hi,
To resolve your issue as soon as possible, please post your question on the Forefront TMG forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=Forefrontedgegeneral
Steven Lee
TechNet Community Support

JMS doesn't work with VPN connection on weblogic8.1

          Hi:
          We have used JMS topic on weblogic 7.x and we use both LAN and VPN connection.
          However, when we switch to weblogic 8.1, although it works fine when using
          LAN connection,
          it does not work when using VPN connection. We tried three different machines,
          got the same
          error.
          The error is:
          weblogic.jms.common.JMSException: Error creating connection on the server
          at weblogic.jms.client.JMSConnectionFactory.createConnectionInternal(JMS
          ConnectionFactory.java:160)
          at weblogic.jms.client.JMSConnectionFactory.createTopicConnection(JMSCon
          nectionFactory.java:95)
          at com.dynamex.decs.common.jms.DecsSubscriber.initialize(DecsSubscriber.
          java:59)
          at com.dynamex.decs.client.orderentry.swing.OrderEntry.initRMI(OrderEntr
          y.java:1714)
          at com.dynamex.decs.client.orderentry.swing.OrderEntry.<init>(OrderEntry
          .java:124)
          at com.dynamex.decs.client.orderentry.swing.OrderEntry.main(OrderEntry.j
          ava:3180)
          Caused by: java.rmi.MarshalException: CORBA COMM_FAILURE 1398079697 No; nested
          e
          xception is:
          org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 209 completed:
          No
          at com.sun.corba.se.internal.iiop.ShutdownUtilDelegate.mapSystemExceptio
          n(Unknown Source)
          at javax.rmi.CORBA.Util.mapSystemException(Unknown Source)
          at weblogic.jms.frontend._FEConnectionFactoryRemote_Stub.connectionCreat
          eRequest(_FEConnectionFactoryRemote_Stub.java:106)
          at weblogic.jms.client.JMSConnectionFactory.createConnectionInternal(JMS
          ConnectionFactory.java:139)
          ... 5 more
          Caused by: org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 209 completed:
          No
          at com.sun.corba.se.internal.iiop.IIOPConnection.purge_calls(Unknown Sou
          rce)
          at com.sun.corba.se.internal.iiop.MessageMediator.handleInput(Unknown
          So
          urce)
          at com.sun.corba.se.internal.iiop.messages.MessageBase.callback(Unknown
          Source)
          at com.sun.corba.se.internal.iiop.MessageMediator.processRequest(Unknown
          Source)
          at com.sun.corba.se.internal.iiop.IIOPConnection.processInput(Unknown
          So
          urce)
          at com.sun.corba.se.internal.iiop.ReaderThread.run(Unknown Source)
          Does anybody have the experience? Can anybody give a hint?
          Thanks,
          Tony


Hi Tony,
          Given that the thick jar works, I would classify the problem
          as a bug - not a missing feature. The thin jar is contracted
          to be just as capable as the thick jar. My guess is that
          the bug is likely in IIOP but perhaps could be in JMS.
          Contact customer support (this forum is not maintained by
          customer support). Meanwhile, you can post your info
          to the IIOP newsgroup to see if they can help.
          You asked how long it would take to fix? That depends
          on bug priority (set by the customer) and bug complexity,
          but its usually measured in days or weeks (not months).
          You can speed up the process by giving support your
          logs and stack traces, as well as a simple reproducer,
          and telling them you are willing to try out a prototype
          patch. But before going through extra trouble, just give
          them the logs/stack traces, in case it is a known issue
          for which there is already a fix or there is a fix in progress.
          Tom
          tony yang wrote:
          > Tom:
          >
          > Thanks,
          > We actually use t3. However, in terms of weblogic 8.1 doc, t3 transparently
          > uses iopp. So t3 or iopp both fails over VPN connection.
          >
          > After replacing with full weblogic jar as you suggested, it works.
          >
          > However, we really want the thin client because we have huge amount of client
          > deployments.
          >
          > The other developers here also noticed other problems beside JMS problem
          > when using VPN connection and thin client jars.
          >
          > We guess full weblogic.jar uses real t3 instead of iiop.
          >
          > Seems that iiop does not work well over VPN connection.
          >
          > Could you give some estimate of when we can have the new thin client jars
          > to support VPN connection (even not official release)?
          >
          > Tony
          >
          > Tom Barnes <[email protected]> wrote:
          >
          >>Hi Tony,
          >>
          >>At first glance I don't know what is going on, and can only
          >>make some random suggestions. Perhaps try
          >>the t3 protocol (rather than iiop protocol) if you are using iiop
          >>URLs to connect to JMS. If you are using the new 8.1 thin
          >>client jars, try switching back and using full jar instead.
          >>Perhaps try posting to the IIOP newsgroup.
          >>
          >>Tom, BEA
          >>
          >>tony yang wrote:
          >>
          >>
          >>>I also have the log from weblogic server:
          >>>
          >>>weblogic.jms.dispatcher.DispatcherException: Could not register a HeartbeatMoni
          >>>orListener for [weblogic.iiop.IIOPRemoteRef@745152c4] for weblogic.jms.C:dal603
          >>>t05:rcy:-l91
          >>> at weblogic.jms.dispatcher.DispatcherWrapperState.addPeerGoneListener(D
          >>>spatcherWrapperState.java:563)
          >>> at weblogic.jms.dispatcher.DispatcherManager.dispatcherAdd(DispatcherMa
          >>>ager.java:106)
          >>> at weblogic.jms.dispatcher.DispatcherManager.addDispatcherReference(Dis
          >>>atcherManager.java:196)
          >>> at weblogic.jms.frontend.FEConnectionFactory.connectionCreateInternal(F
          >>>ConnectionFactory.java:413)
          >>> at weblogic.jms.frontend.FEConnectionFactory.connectionCreateRequest(FE
          >>>onnectionFactory.java:385)
          >>> at weblogic.jms.frontend.FEConnectionFactory_WLSkel.invoke(Unknown
          >>
          >>Sour
          >>
          >>>e)
          >>> at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:466)
          >>> at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServer
          >>>ef.java:108)
          >>> at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:409)
          >>> at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticat
          >>>dSubject.java:353)
          >>> at weblogic.security.service.SecurityManager.runAs(SecurityManager.java
          >>>144)
          >>>@
          >>>
          >>>
          >>>"tony yang" <[email protected]> wrote:
          >>>
          >>>
          >>>>Hi:
          >>>>
          >>>> We have used JMS topic on weblogic 7.x and we use both LAN and
          >>>>VPN connection.
          >>>> However, when we switch to weblogic 8.1, although it works fine
          >>>>when using
          >>>>LAN connection,
          >>>>it does not work when using VPN connection. We tried three different
          >>>>machines,
          >>>>got the same
          >>>>error.
          >>>> The error is:
          >>>>
          >>>>weblogic.jms.common.JMSException: Error creating connection on the
          >>
          >>server
          >>
          >>>> at weblogic.jms.client.JMSConnectionFactory.createConnectionInternal(JMS
          >>>>ConnectionFactory.java:160)
          >>>> at weblogic.jms.client.JMSConnectionFactory.createTopicConnection(JMSCon
          >>>>nectionFactory.java:95)
          >>>> at com.dynamex.decs.common.jms.DecsSubscriber.initialize(DecsSubscriber.
          >>>>java:59)
          >>>> at com.dynamex.decs.client.orderentry.swing.OrderEntry.initRMI(OrderEntr
          >>>>y.java:1714)
          >>>> at com.dynamex.decs.client.orderentry.swing.OrderEntry.<init>(OrderEntry
          >>>>.java:124)
          >>>> at com.dynamex.decs.client.orderentry.swing.OrderEntry.main(OrderEntry.j
          >>>>ava:3180)
          >>>>Caused by: java.rmi.MarshalException: CORBA COMM_FAILURE 1398079697
          >>
          >>No;
          >>
          >>>>nested
          >>>>e
          >>>>xception is:
          >>>> org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 209 completed:
          >>>>No
          >>>>
          >>>> at com.sun.corba.se.internal.iiop.ShutdownUtilDelegate.mapSystemExceptio
          >>>>n(Unknown Source)
          >>>> at javax.rmi.CORBA.Util.mapSystemException(Unknown Source)
          >>>> at weblogic.jms.frontend._FEConnectionFactoryRemote_Stub.connectionCreat
          >>>>eRequest(_FEConnectionFactoryRemote_Stub.java:106)
          >>>> at weblogic.jms.client.JMSConnectionFactory.createConnectionInternal(JMS
          >>>>ConnectionFactory.java:139)
          >>>> ... 5 more
          >>>>Caused by: org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 209
          >>>>completed:
          >>>>No
          >>>> at com.sun.corba.se.internal.iiop.IIOPConnection.purge_calls(Unknown
          >>>>Sou
          >>>>rce)
          >>>> at com.sun.corba.se.internal.iiop.MessageMediator.handleInput(Unknown
          >>>>So
          >>>>urce)
          >>>> at com.sun.corba.se.internal.iiop.messages.MessageBase.callback(Unknown
          >>>>Source)
          >>>> at com.sun.corba.se.internal.iiop.MessageMediator.processRequest(Unknown
          >>>>Source)
          >>>> at com.sun.corba.se.internal.iiop.IIOPConnection.processInput(Unknown
          >>>>So
          >>>>urce)
          >>>> at com.sun.corba.se.internal.iiop.ReaderThread.run(Unknown Source)
          >>>>
          >>>>
          >>>> Does anybody have the experience? Can anybody give a hint?
          >>>>
          >>>> Thanks,
          >>>>
          >>>>Tony
          >>>
          >>>
          >

Issues with BAM Connection in JDeveloper

I have issue with Jdeveloper BAM connection.
After BAM & OiD configuration, I can't test BAM connection in Jdeveloper. Jdev reports BAM configuration error.

I've created new one.
Actually, I have to return to Windows auth, cause cust should make report develoopment.
Could you provide any information how BAM connection shold be connfigured? I'll make next try.

Issues with vpn connection thru ATT DSL

Similar Messages

Maybe you are looking for