Issues with waking from "sleep" mode
On a few occasions now and more often than not, after waking the computer from sleep - I get the Message "You need to restart your computer".
Usually I have a few programs open, but not running and sometimes I have an external hard drive connected and mounted, though not always.
Any advice or suggestions would be welcomed
Thanks
Tony
Hi Eco,
You are getting a Kernel Panic, which can be related to quite few things and only discoverable by eliminating all the options. Here's a few causes of Kernel Panics, bad RAM, peripheral driver conflicts, overheating and a few more obscure reasons that aren't worth mentioning now. The most common cause is RAM failure. Also, It's not unusual to have the hardware test come up with no faults when there clearly are faults.
Do a web search Kernel Panics and see what further info you can come up with. There is a good explanation on the Mac support site, but you can find some better info from other sources.
Similar Messages
-
MBP issues with waking from sleep and on opening lid
I have a 2009 macbook pro just 3 weeks old! upgraded from an older macbook
the problem is when it goes to sleep mode and i wake it by opening the lid or pressing any key (trackpad clicking wont wake it) the curser is unresponsive, as are all of the keys apart form the power button - it brings up the box asking if i want to shut down or restart. But I cant choose any as no curser movement! so I have to hold in the power button to hard restart everytime.
I rang apple support who I must say are very helpful everytime. I reset the PRam, reset factory settings ect then he said if still no joy reinstall the system.
All of which I have tried and it is still doing the same problem.
I shall have to give them a call in the morning to see what else they suggest.
Has anyone else had this issue on a new macbook - all updates have been installed and I only use it for web and emails ect so no weird installs going on
Thanks in advance
Lizstill no joy, did a reinstall of the OS and its still intermittently not waking once i close the lid and the hard drive stops.
The next thing to do is to get apple to have a look at it. very annoying as I have only had it since 28th Dec but nothing else I can do. Pc world will have it in to fix rather than replace so to be honest I'd rather Apple had a look than some monkey boy with fat clumsy fingers on a YTS scheme lol -
Hi All, Since updating to Lion, my imac won't recognise the ext HDD (Maxtor) when waking from sleep mode, I have tried another port, diisc utility (Ext HDD not listed in here) but nothing works. I now find that I have to restart the imac to get the drive recognised..which is fine until the imac goes into sleep mode then I lose the drive and have to restart etc etc.....anyone suffering same issue. The Ext Drive worked perfectly until the upgrade..
Thanks for this, and apologies for delay in replying...in between seeing your post I backed up the ext hdd to another mac and used the disc utility to erase and repair and then re mounted the ext hdd. OK. I have then tested the ext hdd being recognised when waking from sleep mode a few times and everything appears to be fine. If this doesn't work (long term) I will follow the instructions as you have suggested....
I now have a new problem with my HP printer (Photosmart Plus) which is not being recognised by a new wireless router..Ok whilst the router is switch on and I have reconfigured the printer..but when the router is switched off overnight and then switched back on...I get a 'printer is not connected' message and have to go through the re configure routine all over. I am minded to think this is a router problem as the same issue is happening to my wifes Mac Book Pro (which is only a few weeks old)...any suggestions.. -
Dark screen remains after waking from sleep mode
Whilst using Safari Version 3.1.2, Mac OS 10.4.11 on my Powerbook G4 (aluminum, 1.5 ghz), my screen remains dark upon waking from sleep mode. Trying to increase screen brightness is ineffectual for some reason likely related to this problem. My only workaround is to force shutdown and restart. Any ideas about a solution would be greatly appreciated.
Hi Gary,
This behavior is not a Safari issue but system related.
Close all applications an run in utilities> disc repair permissions.
After you done reboot an see what happens when your Mac gets to sleep mode again. This time don't open any applications to test it. Just leave it showing your desktop.
Post back with the results ...
Dimaxum -
Wifi disconnects when waking from sleep mode; running Mountain Lion
Had this same issue with Lion as well,, wifi disconnects when waking from sleep mode,,,any ideas how to fix this pesky issue?
Hi Sky,
This has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use. -
Black screen after waking from sleep mode - Compaq Presario CQ5110F
My mother's computer has been having the problem listed in the subject -- after waking from sleep mode, the monitor just stays black, and won't come back. After trying everything I could find online, I eventually found the bios update which claims to fix the exact issue. The problem is that I guess my mother had opted to upgrade to Windows 7, while the bios update seems to only work for Windows Vista, as I get the following error message: "Your system does not meet the minimum requirements for this update. Update has been canceleld. (9998)." I've tried running the update in Vista compatibility mode, with no luck. I've tried using a different monitor, I've updated all the drivers, Windows Updates are all current, I've cleared CMOS. Any idea on how to fix this? It's very recent; only for about the past 2 weeks has this been happening, while we've had the computer for over 3 years. It's quite a waste of energy to keep it on all day.
Hello liltwix,
When taking your computer out of safe mode the screen just remains black, is that correct? I will try to help you with this issue.
I understand you upgraded from Vista to 7, was that when the issue started or has the computer had windows 7 installed for some time before this problem started?
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem! -
Satellite A660-18N - Powers off after waking from sleep mode
My Satellite A660-18N powers off 2-3 seconds after waking from sleep mode. I upgraded the memory from 4GB to 8GB, using Crucial's website, so I know it's compatible. BIOS is updated to 2.00.
Not sure what to do, how can I fix this without turning off Sleep mode completely?Hello
>Currently I've turned off sleep mode altogether. I've also reset the BIOS settings from the boot menu but it hasn't fixed the problem
And why you dont test it with pretested memory modules from an authorized service provider? The part number for such RAM is PA3677U-1M4G. Its one 4GB DDR3-1066 MHz memory module.
Furthermore it would be interesting to know who says that Crucial memory is compatible Maybe its compatible to other Toshiba notebooks but fact is you have problems after waking from sleep mode and this happens only with Crucial memory and not with preinstalled modules.
I dont think somebody here can provide you a solution for this because its just a compatibility issue and its user to user forum only. -
My desktop background disappears after waking from sleep mode
My desktop backgroung disappears after waking from sleep mode. Just converted to Lion.
I spoke with Tech Support this morning. Apparently this is a known issue with Lion. I found it interesting that the rep insisted on saying that "it is the way Lion functions" instead of admitting that it is a GLITCH in the programming. He even said that it happens randomly and not on all computers and not all users experience this. That ought to tell you that it's a glitch. Anyway, there is a "workaround" which is what you do to put a bandage on a persistent wound that should really get surgically stitched:
You either have to log out every time you leave the laptop, or you have to change Energy saver preference to set the display to go to sleep AFTER the computer is set to log out (in Security preferences).
Here is the article that instructs us on applying the bandage::
http://support.apple.com/kb/TS4135?viewlocale=en_US
Suffice it to say that Apple does not plan on stitching this one up any time soon.. -
I installed OS X Lion v10.7.3 because of the following claim.
The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that:
Resolve a Wi-Fi connection issue when waking from sleep
It continues to be a real pain having to reconnect to the network each time I wake my MacBook Air from sleep.
Does anyone have a suggestion for the resolution to this problem?It seems the update fixed old problems for some and caused new problems for others. Sorry to hear you're in the latter group.
Here are some things to try.
1. Go to System Preferences > Network, and click the gear icon under the network interfaces like so:
Whatever service order you have set, drag Wi-Fi either to the top (assuming it's not already there) or someplace else in the list. Click OK and then Apply. Sleep the system then wake it again to observe any changes.
2. Click Wi-Fi in the above then click Advanced. Select all the networks your computer has ever joined and delete them with the "-" button. OK then Apply again. Select your network under the AirPort icon to re-join it. Sleep and wake again to see if that did anything.
3. Try creating a new, temporary user account. Log in under that account to see if its behavior is any different.
You may have done all of these already but perhaps there is something you have not thought of. If nothing helps we may just have to wait a bit longer for Apple to release a fix. -
Freeze after waking from sleep mode on MBP retina
After waking from sleep mode my MBP retina freezes for 3-5 seconds. Mouse and touchpad don't work. I wonder if it's mountain lion problem or hardware problem. Anyone faced this?
Just got a brand new model and OS X 10.8.2 (12C3012) and face the same issue, almost everytime it sleeps for too long. This is not a 3rd type SDD, this is a standard Apple SSD. I turned off the BT, I removed the almost every option from the battery saver mode. The current test is to disable the power nap - I will let you all know the result in a few hours.
-
My zero Key isn't working after waking from sleep mode. This is a real problem for me because my password contains a zero. I don't recall spilling anything or jamming it just that it worked before I closed the computer and wasn't after I woke it up.
I would like to fix the key but if that's not possible right away , Is there a way to reset my password without being able to type with a key thats in it?Start by swapping the keyboard. You don't need to spend a fortune, and handy to have spare. USB cables can be bad even new.
When I had some problems Apple wanted to blame the mouse, keyboard, cable, but in the end I found
A. run Disk Warrior
B. Corrupt pref or conflict with version of Hardware Monitor and other background tasks -
My MacBook Pro won't reconnect to my Wi-FI automatically after waking from sleep mode
Hello, everyone. Since I updated to Yosemite, my MacBook Pro won't reconnect to my Wi-FI automatically after waking from sleep mode.
Does anyone know how to fix that?
Thanks in advance,
Arthur.Hi, arthurpacifico.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting steps that I would recommend trying to see if it corrects this issue.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Reset your computer’s PRAM
http://support.apple.com/kb/HT1379
If the issue persists, try the troubleshooting steps I have attached below.
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
After waking from sleep or starting up, your computer may not show that it is connected to a Wi-Fi network.
After start or wake, your computer may indicate that it is connected to a network, but does not connect to the Internet.
Solution
Use these steps if your computer does not automatically connect to your desired Wi-Fi network.
Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
Click the TCP/IP tab from the top of the screen.
Click the "Renew DHCP lease" button.
Select the Wi-Fi tab and view your Preferred Networks list.
Select each network and click the minus sign to remove those networks from your Preferred Networks list.
Click OK and close the Network preferences.
Remove your stored network passwords using the Keychain Access Utility.Restart your computer.
Open Keychain Access from /Applications/Utilities. Your window will look like this:
Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/ht4628
Cheers,
Jason H. -
Resolve a Wi-Fi connection issue when waking from sleep
Hi,
In the recent release for Mac OS X Lion 10.7.3 "Resolving a Wi-Fi connection issue when waking from sleep" was supposed to be resolved, not so at my end. Has anyone else encountered the same issue and if so will there be a resolve.
Thank youHello BGreg and thank you for your answer,
I have alreadty read about this solution, and tried it.
I downloaded the 1.2 Go file, and applied it. And repaired permissions.
Everything went fine.
Unfortunately, it didn't solve the problem.
Meaning that when iMac wakes up, it doen't join my WiFi network.
I have to do it manually.
I don't know what to do : it is very strange because I never had that problem with OS 10.7.2 !
And my network setup has never changed.
another info :
I noticed that in the network setup screen, when I want to close the little lock to restrain further modifications, it won't close. Weird !
Do you think I should call Apple Assistance ? -
Hi,
I have an Imac 2.8 GHz Intel Core 2 Duo desktop which I have upgraded to lion.
Recently I keep getting kernel panics when waking from sleep mode and I cannot figure out what it is.
I am not very computer savy - I.e. I use a computer but don't know programming etc.
The computer then asks me to shut down and restart.
Any help would be much appreciated as this is driving me crazy.
An example of the latest kernel panic log as as follows:
Fri Jan 6 21:25:02 2012
panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff80002936b3, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000020, CR3: 0x000000000f636000, CR4: 0x0000000000000660
RAX: 0x000000000006f9d8, RBX: 0xffffff800445d598, RCX: 0x0000000000000020, RDX: 0x0000000000019fd8
RSP: 0xffffff808073b520, RBP: 0xffffff808073b540, RSI: 0x000000002996b2ee, RDI: 0xffffff8003f83ce8
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff800bf31788, R11: 0x0000000000009268
R12: 0xffffff800374c000, R13: 0xffffff800445d598, R14: 0x000000000006f9d8, R15: 0xffffff8003f83ce8
RFL: 0x0000000000010202, RIP: 0xffffff80002936b3, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000000000020, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff808073b1e0 : 0xffffff8000220702
0xffffff808073b260 : 0xffffff80002c266d
0xffffff808073b400 : 0xffffff80002d7a1d
0xffffff808073b420 : 0xffffff80002936b3
0xffffff808073b540 : 0xffffff800029383b
0xffffff808073b560 : 0xffffff800029485b
0xffffff808073b590 : 0xffffff800027e44b
0xffffff808073b5f0 : 0xffffff7f811a44dd
0xffffff808073b630 : 0xffffff7f811a36c4
0xffffff808073b760 : 0xffffff8000328517
0xffffff808073b7b0 : 0xffffff80002e823b
0xffffff808073b8a0 : 0xffffff80003170ce
0xffffff808073b8d0 : 0xffffff80002ec664
0xffffff808073b9e0 : 0xffffff80002f0229
0xffffff808073ba50 : 0xffffff80002f0265
0xffffff808073ba80 : 0xffffff80004e6833
0xffffff808073bb50 : 0xffffff8000316ca3
0xffffff808073bba0 : 0xffffff80005a6e29
0xffffff808073bc30 : 0xffffff8000265675
0xffffff808073bc80 : 0xffffff80002651f3
0xffffff808073bcc0 : 0xffffff800026a62f
0xffffff808073bdc0 : 0xffffff800026cdb4
0xffffff808073bf40 : 0xffffff80002c1f0b
0xffffff808073bfb0 : 0xffffff80002d7941
Kernel Extensions in backtrace:
com.apple.BootCache(33.0)[7D74A237-77EF-359F-B1E2-CB1E602E8B9F]@0xffffff7f811a2 000->0xffffff7f811aafff
BSD process name corresponding to current thread: corestoraged
Boot args: 0x0
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 46767492658
last loaded kext at 39979515424: com.apple.driver.AppleTyMCEDriver 1.0.2d2 (addr 0xffffff7f81930000, size 45056)
loaded kexts:
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleHDA 2.1.3f7
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.kext.ATIFramebuffer 7.1.2
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.AppleBacklight 170.1.9
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.ATIRadeonX2000 7.1.2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.1
com.apple.driver.AppleLPC 1.5.3
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.CoreStorageFsck 182.10
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.0.1
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.iokit.AppleYukon2 3.2.2b1
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 4.5.0
com.apple.driver.AirPortBrcm43224 500.36.11
com.apple.driver.AppleUSBUHCI 4.4.5
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 167.0.0
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.driver.AppleHDAHardwareConfigDriver 2.1.3f7
com.apple.driver.DspFuncLib 2.1.3f7
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleHDAController 2.1.3f7
com.apple.iokit.IOHDAFamily 2.1.3f7
com.apple.iokit.IOBluetoothSerialManager 4.0.1f4
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.kext.ATI2600Controller 7.1.2
com.apple.kext.ATISupport 7.1.2
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.1f4
com.apple.iokit.IOBluetoothFamily 4.0.1f4
com.apple.driver.CoreStorage 182.10
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.1
com.apple.iokit.IOUSBMassStorageClass 3.0.0
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOATAPIProtocolTransport 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.1
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IOUSBUserClient 4.5.3
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IO80211Family 411.1
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOUSBFamily 4.5.3
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.7
com.apple.iokit.IOACPIFamily 1.4
This is all double dutch to me.
Would anyone be able to help please???
Thank you very much !!
DaveHi, for other peoples information - I finally figured out the problem. It was actually a faulty RAM module which I had bought. I had upgraded from 2 to 4 gb of RAM using an approved type of RAM for my particular computer. Finally I removed one module of RAM (after doing nearly everything else under the sun including trying to reinstall the operating system and wipe the computer etc) and the computer worked fine.
Dave -
10.7.3 issues with reconnecting to the Internet after waking from sleep mode?
My iMac worked great until this last update. Now it does not connect to the internet after I wake it from sleep mode. Any fixes?
I have a similar issue. My connection has been rock-solid since we went to Uverse, and now my computer loses the internet every 60-90 minutes or so. Driving me nuts. iPhone still on wireless router to internet, so problem seems to be computer.
Maybe you are looking for
-
Cannot connect ipod to itunes!!
I've not long bought a laptop and i've just downloaded itunes on to it. I used my ipod before on my other computer and it worked fine. I plugged my ipod in and it worked for about 3 minutes it synced it to this laptop but then it just disappeared tri
-
Hi, How system pick the credit value in sales order.What are the different setting required for this? Regards Prabudh
-
Can't move regions all at once anymore, why?
I am working on a very large orchestral score and before I was able to move all tracks at once around in the arranger, but now even with all regions in all tracks selected, only the track on which my mouse is, is being moved, Why is this?
-
Hi, This is a third party sale scenario, Vendor (K) is selling to the Customer (D) & invoicing thru our client (X). Now in this case, ideally vendor incoice value whould be the COGS for this sale. And it is happening rightly, at the time of GR for Ve
-
Connecting to mysql database, http 500 error
I have dreamweaver cs3, I have setup my site, set up my testing server and am trying to setup my mysql connection. I am on a windows xp pro. My testing server is on a local network connection and is running ISS 5, PHP 5, and mysql 5. I am going to ru