Issues with wi-fi on latest update

ever since i updated my ipad 2 to the newest 6.0.1 version it will not connect manually to my house wifi. i have rebooted, removed router and then added it back on. i have tried every fix and it doesnt work.help please

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

Issues with iPod Touch and latest update (4.3.3)?

I recently updated my iPod Touch 3G to 4.3.3. Before updating, I had absolutely no issues. Since updating, the iPod will shut off at will, sometimes flickering, sometimes going straight to the "slide to shut down" screen. Sometimes it will shut down in the middle of an app, I'll start it back up, and it will shut down again immediately. Occasionally, when I start it up after crashing, it will make the camera shutter sound! And there's no camera on this iPod!
Possible extenuating circumstance: I upgraded from a Power PC iMac to an Intel iMac at the same time I updated the software on the iPod. I have read the suggestions and the troubleshooting guide, and nothing has helped so far. I wiped the iPod clean and reinstalled and all that did was wipe out my settings (of course). Resyncing the iPod worked (apps and music loaded fine), but still it shuts down without warning. I tried installing a new free app, but that didn't work.
Usually I'm pretty good at figuring out these sorts of issues, but I'm at my wits end. Is anyone else having these problems? Am I screwed?

Okay, so now I have read that you have to install a free app through the phone, not through the computer. I've done so and it looks like everything is good for now. Keeping my fingers crossed. My question now, is that if this is a common occurance with the 4.3.3 update, why did Apple imply that I needed to wipe my iPod clean when this was the much easier and less invasive answer?

I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be

I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be selected. Any thoughts? TIA

Greyed imaged in the Import dialog box mean you have already imported the photos into Lightroom, so there is no need and no benefit to importing them a second time.
Just go to the Library module, search for the desired photos, and resume working on these photos.

You Tube not playing video on Firefox with Adobe Flash after latest update

You Tube and other sites are not playing video on Firefox with Adobe Flash after latest update for both. Adobe Flash is working on other sites but not You tube and those sites that may have embedded You Tube videos, I'm not sure.
Adobe Flash does not crash and no error message is showing. All that shows is a dark screen for the Flash video. Right clicking the screen shows only a non-clickable 'Movie not loaded' and the clickable link to the Adobe home page.
I have spent an hour trying things as suggested for past problems similar to this but none have helped.
I have sent sad face letting you know what I think of the latest update because of this which says pretty much the same thing as I have said here.
I have no further info but if I had some input and queries form you I might be able to provide more.

I'm not sure how to remove the 12.xxx version,. I don't understand why it is there, usually updates over wirte the old one as far as I know. I don't know where to find it.
pref .js deleted.
I could not find a user.js
I disabled hardware acceleration on one of them, not sure which and I don't remember how I did it but think it must have been on the flash.
No idea what protected mode is
no new profile, I've never done this.
Ok, did what you have said as much as I could. I have been fidgeting with things now for a couple hours. After doing a CCleaner and Registry cleanse, turning off and restarting the computer, the videos are now p-laying.
I would still like to know how to find and get rid of the duplicate Flash plug in though if you would't mind.
Thanks for the help.

How to download CS5 master suite and CS6 photoshop with all of the latest updates?[was:Photoshop]

Is there a way to download CS5 master suite and CS6 photoshop with all of the latest updates?

CS5...no; CS6...maybe. Check ebay.

Is anyone else having issues with airplay after the Lion update?

Is anyone else having issues with airplay after the Lion update? It sees the libaray but won't connect...

I'm having the same issue. So far all lion has done for me is make all my microsoft office documents un-readable until I upgrade (about $150) and lose my home share capabilities...can anyone assist with this?

Issues with Character Pallete after latest PS CS6 update

Since the latest update earlier this week, I've experienced major issues with the character palette - particularly the point size and tracking. The tracking issue is by far the greater of these two evils and the following explains the issues I've observed:
tracking - the number you type isn't the number used to set the tracking. The slider and up/down arrows do not remedy this problem, though they make it slightly more predictable. The number that appears seems random, though I've noticed a pattern in some instances (typing 20 sets tracking 18, typing 40 sets it 36, typing 60 sets it 54, and so on). This issue also appears to be connected to free transforming a text layer, so the pattern is possibly based on the percentage of scaling.
font size - the number you type works if size is increased in small increments to a certain point. Then it max's out, and this error appears repeatedly (after ok is clicked the error pops back up)
I've searched the web for resolutions to the issue and haven't found anything. This is what I've tried and none of it worked to any lasting degree:
- set units to pixels in preferences and restart photoshop
- set units back to points in preferences and restart photoshop
- restart photoshop and pc (several times)
- shut down photoshop and pc (several times)
- unplug pc and discharge static

I dont know the the below link. But if you go to Photoshop .com feedback. And go to Topics>Problems and sort by most recent, these text bug topics should be on that page. (I created the last one "Scrubby Leading Bug")
Text layer inconsistent property values (new in 13.0.5 / 13.0.1.2)
Photoshop: Font style size problems in CS6
Photoshop CS6: program error from vector tools, multiple text layer font size weirdness
Photoshop 13.0.5 Scrubby Leading Bug in Character Panel (appears after Free Transform of Type)

Having issues playing videos after the latest update

After the latest update for ITunes, I am having issues with some of my videos. Some of my videos will play while others in attempting to play them will play back choppy, at times the picture will freeze and then all at once the video will start fast forwarding to catch up to where it should be, and then at other times the video will cut out intirely, the screen will be completely black without the control areas in the top right corner or the center of the bottom of the screen even being visible.
Have been unable to watch a large number of my TV series, and movies.

Try playing videos directly in Quicktime:
1.) Open Quicktime
2.) Click File > Open File
3.) Navigate to your iTunes folder
4.) Movies are in iTunes\Movies\, TV in iTunes\TV Shows\, podcasts in iTunes\Podcasts
5.) Select a video and open it
6.) Watch in awe as Quicktime plays it perfectly, full screen option is in the View menu BTW.
iTunes 10.7.0.21 is a disaster.

Possibly cell radio issue with lollipopo 5.1.1 update

hi all I thought update had gone ok. Very little battery usage when phone is in sleep/display off, etc. Used home wifi network a lot yesterday. Basically no data wifi. day 2 (today): I was out today and had my data connection (4G) on quite a lot (hadn't yesterday).Wasn't streaming or anything, just needed data for checking train times, google maps a bit - certainly nothing intensive.Phone was charged to 100% (switched off) then switched on at 9am ish this morningCell Standby reports, although only 5% of max battery usage, 24% time without signal (out of 8hr). This seems ridiculously high.I have noticed that my signal strength is frequently 1 bar with 4G.I noticed a bit of signal fluctuation, even with 4G switched off but virtually every time I got my phone out and 4G was on, it was on 1 bar of signal.I checked the battery history details:WiFi is indicated as active for the entire time I've had a shoddy mobile network signal - this correlates with my 4G usage.Other times when Wifi has been on (home network, not data), cell signal seems fine.I am on O2 in London4G can be a little up and down for me but has NOT generated this measure of cell standby / out of signal until 5.1.1 upgrade5.0.2 was ok, although tbh I use 3G most of the time, as I associate better battery usage when I don't use 4G.I was even in exactly the same locations using data, etc, as when I was with 5.0.2 ROM, so I'd not anticipate such a dramatic difference/drop in signal quality.I checked with 02 and there are no reported service issues in my area (checked via their website service status).I've just remembered that I had GPS on too but know, 100%, that Location Services was set to "device only", rather than high accuracy. You can also see from my battery history usage, how little the GPS was 'on' for.I am very surprised and disappointed at this. This suggests (to me) a radio issue in the latest update. However, I've not seen others complaining about cell radio issues, so can't corroborate/prove my suspicions. Anyone have any suggestions for me? Cheers, Gaz Screenshots:

uliwooly wrote:
@MyAliasIsGary Reinstall 5.1.1 with PCC, it's a pain but it should smooth things out, also turn off auto update apps and check if you are auto backing up with G+/photos PC Companion (PCC) Bridge (for Mac) Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355 hi mate oh seriously though? A re-install? It took a day for me to get everything back in place (I wiped my internal storage), so I'd have a clean install of 5.1.1 (I wiped 5.0.2). So am I to do a repair or reinstall (or are they the same)? The only other thing I did yesterday was hold power button and volume-down until you get 3 buzzes - I read that this wipes the cache partition. It was suggested this could clean up sluggish performance after an update (although tbh I didn't find my phone to be sluggish). RE: auto updates. I've turned all them off. Also, things should not be syncing in background either (I'm careful to turn that off). G+ shouldn't be updating in background as I've disabled it lol In fact I've disabled most of the google stuff.RE: backing up of photos. This shouldn't be happening, at least going on the amount of data I've used today (only 17MB). Btw, could you just explain (or point me to an article) as to why I should use PC companion (rather than say just doing factory reset)? Cheers, Gaz

Issues with multiple things since Mavericks update

I installed the Mavericks update and since, I have been having multiple problems with different things on my MacBook Pro 13"
1. Printer issues: I have an HP officejet 6500 wireless printer (Officejet 6500 E709n Series), and now it's having major issues with printing, yet was working perfect prior to update. It will either cut out pages when printing PDF documents, or printing so slow that it has to take a break in between printing each document (an issue that all never occurred until update), to print documents back to back, it will stop after one document as though I have no other documents in queue to print, and pauses for an extremely long time (nearly a full minute, no exaggeration here, literally almost a full 60 seconds), something it's never done before this update. My Apps update even did an update to the HP software that is inside the Mac already to use printing (in other words, the mac doesn't need to have the HP software manually installed for it to work, it automatically sees the printer because it is connected to my wireless network just as my Macbook Pro which is also connected wirelessly to my network).
2. Internet issues: am now unable to click on certain links in safari that I was able to use prior to the update, yet they will open fine inside of firefox with no issues, yet I cannot always switch between two different browsers to perform task online (literally have to start all over inside firefox while in the middle of something in safari). Also lots of websites no longer work correctly and I have to constantly clear history and cookies to attempt to use certain sites, at times it will help, other times it wont work period, yet the same exact site will work perfect in firefox (which I do not use, only on my system for use on certain sites for school because in safari prior to the update, I would have issues with only the class site and some links not working at all, no spinning wheel, no errors, just nothing, no response of any kind, basically worse than what it was before the update). Another issue, hit Ctrl+a to select inside Safari and it highlights, but then when you click out of the highlight, it comes back on it's own several times without you hitting anything, just click inside the screen on a blank space (no links, etc) with touchpad.
3. System issues: My system is way slower than what it was prior to the update, click on things and it wont respond at all, then minutes later will eventually respond or pops up the spinning color wheel, which it either never responds or takes an extremely long time to respond. And no matter how much I restart, it doesn't help anything. Even just to sit doing nothing, no clicking or usage on the system, and the color wheel pops up.
4. Mail issues: Mail is now popping up completely blank messages that I have sent out, the person receives it with no issues, yet I cannot look at the message I sent neither in the inbox or the sent items when I need to look at them again, an issue not present prior to update. Also I an now having issues when receiving mail, sometimes it will check for mail and sometimes I have to manually click to make it check the server for mail, an issue not present prior to update as well.
As of now, since I have had the chance to used the system since the update, these are the issues I have had, yet haven't had the chance to check other things, so there may be other issues that are occurring that I'm not aware of at the moment. I knew it would be a mistake to do this "free" update and did so anyway and now having one issue after the next with each application I open to use.
Mac general info:
Mac is one year old, purchased brand new, no shareware programs of any kind installed.
Use for school and basic web surfing use.
Do not install any programs onto system that I'm unsure are safe (basically programs for/from school/school websites only, or from the Mac Apps store only), not even programs like Skype, nor any windows based programs of any kind.
Lots of free memory avail because I save everything onto external hard drives (purchased brand new as well, only 4months old) in case system crash occurs, only things on the system is Itunes music or pics from photo stream that sync to the system when Iphone connected.
Mac system info:
- Processor 2.5 GHz Intel Core i5
- Memory 4 GB 1600 MHz DDR3
- Graphics Intel HD Graphics 4000 1024 MB
- Software OS X 10.9
- Number of Processors:          1
- Total Number of Cores:          2
- L2 Cache (per Core):          256 KB
- L3 Cache:          3 MB

For those needing help fixing their system and putting it back to Lion or Mountain Lion, this is what I have done to eliminate all my issues in about an hour (depending on your internet connection).
Amazing thing, I just restored my computer back to Mountain Lion, and she's working perfect again, as I knew she would. E-mail popping into mailbox instantly as it should and did before the update, printer working fast as it was before update, no more freezing or glitches of any kind thankfully and finally. Here is the link that is through the Apple site to direct you on how to put your system back and get rid of Maverick's, that is assuming that is what you would like to do and also includes link for those wanting to try fixing the issue if that is your preference (most of this info is for those with mountain lion and some with the previousverisoin of OS X lion).
If you want to keep Maverick's here is a good post on the apple discussion board to help you out:
https://discussions.apple.com/docs/DOC-6161
If you just want to totally get rid of it and put back what you had before, this is the short version of how to do so:
https://discussions.apple.com/docs/DOC-3353
NOTE: This particular link has a lot of info on what to do for different situations, it is a bit lengthy, yet still very helpful.
OS X Mountain Lion: Reinstall OS X (direct from Apple support site, not someone else):
http://support.apple.com/kb/PH10763?viewlocale=en_US
OS X: About OS X Recovery (also from apple support directly and includes some instructions just the same as previous links above):
http://support.apple.com/kb/HT4718
Just in case you aren't sure what it will all look like as you are doing things, this is a link to show you a few pics of what you will see as you as you are going through the process, it can be helpful for those who aren't sure what they are doing or how to do things at all:
http://www.apple.com/osx/recovery/
This is a way to download the Mountain Lion disk info from the server
http://support.apple.com/kb/DL1433
I hope this helps someone, it was amazing for me and my system is working perfect again like it was, battery life is way better went from like 3 hours to like 5 (not on full charge by the way, after it sat for a while doing the online update which took a while so that's saying something alone, huge improvement). I plan to wait a while before attempting to reinstall Maverick's, long enough for them to fix the bugs.

TS1702 Is anyone else having issues with the most recent Facebook update? I updated it yesterday and now it won't open. I have uninstalled and reinstalled the app, but it still fails to open! Any suggestions?

Is anyone else having issues with the most recent Facebook app update? I updated it on my iPad 2 yesterday, now it will not open app at all. I have restarted iPad, uninstalled app and reinstalled, several times and still it will not work! Any suggestions? I have also closed the append still no results!

I just started having this yesterday. It's only happened twice, but it's annoying. My wife texted me that she was coming home last night, and it showed up immediately on my iPod Touch but not my iPhone. I opened my iPhone and it soon updated. Worked fine after that. Then just a moment ago today my wife texted me and the same thing happened. I heard my iMac and iPod Touch receive the message but it didn't display on my phone until I opened the phone and it showed up again a little bit thereafter. I suppose I'll send Apple some feedback on this issue.

Has anyone had issues with the most recent Yosemite update

I installed Yosemite October of 2014 mainly because I needed to update itunes to continue to help my daughter maintain her music files. Anyway the reason hardly matters. My computer and Yosemite did not get along. Posted up a file of my computer condition for people to look at here and the basic recommendation was to delete this that and the other thing. So I did that and the computer worked somewhat better. However I really am not sure if it was working better because Apple had been making progress with Yosemite ironing out Yosemite bugs. I had not reinstalled any of the software that it was recommended I delete back in October. So I doubt that is an issue.
Two weeks ago while updating, generally, a Yosemite update started downloading to my computer. It is now running 10.10.2.
Since then Mozilla crashes about five times a day and runs very slowly most of the time. Wondering if there is anything I can do or should I just wait it out...hope for the bestv AGAIN. I am encouraged by the fact that over time from October to mid February, Yosemite and my computer kept getting along better and batter. Since the update I am more or less back to square 1 as far as general speed and functionality and behind the eight ball as far as Miozilla goes as it is crashing constantly.
I also do not like how update files are identified in Yosemite. There are times when all you get is a notification that there are updates ready with no identification of what they are. Had I known that was a Yosemite update, I would not have touched it. What is up with this no identification of update files? Trying to ambush us now because people are beginning to avoid their updates? Good grief Apple.
Anyway....any ideas? Just wait it out? Hope Apple gets back on a path of bug fixes for Yosemite? Anybody with a quick fix for this one?

Automatically checking for updates is not the same thing as automatically installing updates and even automatically downloading updates is not the same thing as automatically installing updates. If Apple has now decided to describe them and implement them that way ....that is a mistake!
Here is what I have in my App store preferences although I repeat, I have never changed anything. What items are selected there are the items selected ions ago or defaulted in possibly with iTunes 12.0 installed and I was always in the past been given the opportunity to view any updates BEFORE They installed.
"Automatically check for updates" is checked. That should not cause an issue of any kind. If it is that is a problem not of my making!
"Download newly available updates in the background" is checked with an additional descriptive line of information that reads "you will be notified when the updates are ready to be installed" I was going to uncheck this. Although I did not ever go to this location and change my settings which leads me to believe that this is a default choice in Yosemite or iTunes 12.0 as this is not the way I am used to my updates either coming to me or being installed
"Install app updates" is checked ...Really....with permission, without permission, with notification? What the heck does this line really mean? Going to uncheck this
"Install OS X updates" IS NOT CHECKED
"Install system data files and security updates" is checked. This is another one that I am going to uncheck
"Automatically download apps purchased on other macs" is not checked
This system clearly Installed an OS X update without even asking me if I wanted it installed regardless of the fact the box is not even checked. So I have no idea how it managed to do that when the check box for OS X updates is not checked. A big OS X screen came up as the thing started installing leaving little doubt what it was at the point of being too late to do anything about it
There is an interesting element to the relationship between "Download newly available updates in the background" and "Install app updates". If you uncheck the former, a check immediately appears in the box for the latter and the box ix grayed out preventing you from making further changes. So your options are for updates to be downloaded in the background or have updates installed without prior notification. What the heck kind of a choice is that?
I am going to uncheck all of these for the time being except "automatic checking" and "Download newly available updates in the background". The former should not cause a problem and has never in the past caused a problem. Seems to me that I am forced to the latter for now. However to be perfectly honest i no longer have any idea what Apple is doing and I am not completely convinced that they know either.....not any more
I am going to go to Apple Tech Support and get full descriptions from them as it appears possible that they have changed their definitions and descriptive materials with regard to update activity either in Yosemite or iTunes.
Finally, this issue with automatic checking has nothing to do with Mozilla crashing five times a day in Yosemite. That is a separate problem and I guess I am just going to have to hope that Apple Yosemite bug fixes brings this back under control.

Issue with showing input forms for update SQL statement

Hi guys - I'm currently doing a college project and I'm not overly experienced in the area of Java/JSP but I'm having an issue with a project. I have a JSP project inserting, viewing and deleting rows from a database but having an issue getting the update/modify function working in my project.
If I hardcode values into my variables and launch the project it updates fine, but I believe theres an issue with how I'm calling the existing rows. I wish for the user to be able to view the rows from the database and modify as they wish. Once they submit the modifications, I want the row to be updated. Can anyone see where the problem might exist in my code below? I hope it's something small, but I'm not able to fix it at the moment and would apreciate anyone's help! :)
The problem I'm facing at the moment is the input boxes for displaying the current rows from the database are not even showing up..
ModifyNode.jsp:
<%@page contentType="text/html" pageEncoding="UTF-8"%>
<%@page import="suaspackage.NodeManager" %>
<jsp:useBean id="AddNode" scope="session" class="suaspackage.NodeManager"/>
<%@ page language="java" %>
<%@ page import="java.sql.*" %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
   "http://www.w3.org/TR/html4/loose.dtd">
<html>
    <head>
        <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
        <title>Suas</title>
    </head>
    <body
    <%! // Class level declarations
        Connection dbCon; // interface type in java SQL
        ResultSet rs; // interface type in java SQL
        String serverName = "localhost";
        String nodeID;
        String valowneremail;
        String valownersms;
        boolean bFirstTime;
        %>
        <%
        bFirstTime = true;
        if(request !=null){
            if(request.getParameter("submit") != null){
                nodeID = "6";
                valowneremail = request.getParameter("OwnerEmail");
                valownersms = request.getParameter("OwnerSms");
                bFirstTime = false;
                AddNode.update(nodeID, valowneremail, valownersms);
        %>
        %>
    <%
        try{
        Class.forName("com.mysql.jdbc.Driver"); // SQLServer specifics 1
        dbCon = DriverManager.getConnection( // SQLServer specifics 2
                "jdbc:mysql://" + serverName + ":3306" + "/suasdb", "root", "9631");
        Statement stmt;
        String sqlString = "select nodeid, node, owneremail, ownersms from nodemanager";
        stmt = dbCon.createStatement();
        rs = stmt.executeQuery(sqlString);
        } catch (ClassNotFoundException e){
            out.write("<B><CENTER><P>");
            out.write("Error loading class for Suas database connection: </P><P>");
            out.write(e.toString());
            out.write("</B></CENTER></P>");
            } catch (SQLException e){
                out.write("<B><CENTER><P>");
                out.write("Error accessing Suas database connection: </P><P>");
                out.write("</B></CENTER></P>");
        if(rs!=null){
    %>
<jsp:include page="includeheader.jsp" />
<table width="100%" border="0" cellspacing="0" cellpadding="0">
    <tr>
      <td><img src="images/pagemarker_nodemanager.jpg" alt="Node manager" width="176" height="55"></td>
    </tr>
</table>
         <jsp:include page="includenodemenu.jsp" />
<TABLE WIDTH="75% BORDER="0" CELLPADDING="5" ALIGN="CENTER">
<TR BGCOLOR="#9ddc4f">    </TR>
<br>
<TR BGCOLOR="#9ddc4f">
<TH>Node ID</TH>
<TH>Node</TH>
<TH>Owner E-Mail Address</TH>
<TH>Owner SMS Number</TH>
<TH></TH>
</TR>
         <% } else {
            %>
<% while (rs.next()){
    %>
<FORM>
<TR BGCOLOR="#d7eabf">
    <TD><%=rs.getString("nodeid")%></TD>
    <TD><%=rs.getString("node")%></TD>
    <TD><INPUT size="20" type="text" name="OwnerEmail" value="<%=rs.getString("owneremail")%>"</TD>
    <TD><INPUT size="20" type="text" name="OwnerSms" value="<%=rs.getString("ownersms")%>"</TD>
    <TD><INPUT type="submit" name="submit" value="Save"></TD>
</TR>
<% }
    %>
    </body>
</html>
{code}
The relevant part of my NodeManger package:
{code}
    public void update(String updateNodeId, String valEmail, String valSMS) throws ClassNotFoundException, SQLException{
        try{
            String updateSQL;
            String nodeid = updateNodeId;
            String updateowneremail = valEmail;
            String updateownersms = valSMS;
            Connection dbCon;
            Statement stmt;
            ResultSet rs;
            String serverName = "localhost";
            Class.forName("com.mysql.jdbc.Driver"); // SQLServer specifics 1
            dbCon = DriverManager.getConnection( // SQLServer specifics 2
             "jdbc:mysql://" + serverName + ":3306" + "/suasdb", "root", "9631");
            updateSQL = "update nodemanager SET owneremail='" + updateowneremail + "', ownersms='" + updateownersms + "' WHERE nodeid='" + nodeid + "'";
            stmt = dbCon.createStatement();
            stmt.execute(updateSQL);
        } catch (ClassNotFoundException e){
            throw(e);
        } catch (SQLException e){
            throw(e);
    }{code}
Edited by: daveomcgee on Apr 9, 2009 8:03 AM

I support what ThomYork suggests. Learn how to properly separate database/business logic from your view logic. Learn how to use servlets and JSPs together. Read abourt DAO classes. Learn how to build a view in JSPs using taglibs (JSTL to begin with).
You might think it is too much work, but if you learn this stuff the wrong way now, it is going to be that much harder converting to the clean, readable, reusable and maintainable way later on.

Wi-fi issues with new 3.1.3 update

Just updated to the new FW 3.1.3 and now my iPhone 3G wont connect to my wi-fi. It see's it but when I select it, after a few seconds I get a error: "Unable to join the network."
I reset my router and still nothing. MBP and PS3 can get on just fine.
Anybody else having issues?

Reading this and the other posts on Wifi problems is disturbing. My iPhone 3G is on firmware 3.1.2 so not sure that reverting back to 3.1.2 will help as I have the same problems. It also appears that 3.1.3. will exacerbate the problem. Sounds like its time to harass Apples Support staff and developers to get a proper resolution to this issue as this problem is starting to really irritate.
I use a Netgear WNDR3700 wifi router at home. It has support for all bands. At work I use a Belkin router (exact model not remembered) I see the same problems. At my mates house with another Netgear router (DG834G) I see the same problem.
Until the last few weeks I can't say I've had any problems with WiFi on my 12 month old iPhone 3G (firmware 3.1.2 (7D11). However, these last few weeks this phone just can't stay connected to WiFi networks for any great period of time; sometimes minutes, sometimes seconds.
I've tried manually adding wifi networks following hints from other users on the forums, but this doesn't work reliably.
I've now done a full reset of the network element based on advice in Apple's own iPhone WiFi troubleshooter. I'll see how that goes. http://www.apple.com/support/iphone/assistant/wifi/#section_5
I don't believe this issue will be resolved without Apple's action, so come on Apple please help us. We love our iPhones, just don't like to see issues with them!

Content distribution issue with message "Found package properties updated notification for package '00000123'"

I've got strange issue with 1 of my primary sites that started just recently. I've updated the content of 1 package and this now needs re-distribution to all DPs. I've got 3 primary sites and on 2 of those the update succeeded and my DP's got
updated correctly. One primary site it does not work and checking distrmgr.log I can see following message every xx minutes
Found package properties updated notification for package '000008B7' SMS_DISTRIBUTION_MANAGER 6/21/2014 12:00:31 AM 5836 (0x16CC) ==>
Checking Pkgxfermgr.log does not show anything either, I've tried with 2nd application but again the same result it only shows the the notification message.
I saw similar issue yesterday but with restart of the sms_exec service it eventually distributed the content, obviously this is not something I like to do too often.
does anyone have idea what this could be, suggestions are welcome. Thx.

Jason, I've checked the flow from the CAS down to the primary below is quick overview. The package I'm testing is just small package that we use to check replication is working in our environment it's less then 1MB in size and we run it
1/week basically update content and then check monitoring-content distribution that it has been received on our 260 DP's around the globe
CAS (Located in the US EST Time zone)
Distrmgr.log 11:25am update package and needs to be send to 3x primary sites (A00; B00; C00)
sender.log 11:30am all 3 primary sites have received the content.
C00 (Primary site in Singapore having the issue)
distrmgr.log 11:27pm received notification of the package
despool.log 11:32pm packaged content extracted successfully
distrmg.log started to see message Found notification for package '000008B7' and followed by next message
Package '000008B7' (priority 2) is already in queue.
This goes one until 1:21am (Singapore time)
Start updating the package 000008B7... SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
The Package Action is 1, the Update Mask is 160 and UpdateMaskEx is 0. SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
Use drive G for storing the compressed package. SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
Successfully created/updated the package 000008B7 SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
STATMSG: ID=2311 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SG-INTRA100.na.pg.com SITE=C00 PID=10132 TID=8296 GMTDATE=Fri Jun 20 17:21:45.848 2014 ISTR0="000008B7" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="000008B7"
After that nothing anymore.
When I check monitoring - content distribution I can see the package being updated/distributed to 80% of my DP's and last 20% are the dp connected below this Primary site.
To add to the confusion, there was another package distributed around the same time, and then one actually made it to the remote DP's.
This is first time I see this issue.

Issues with wi-fi on latest update

Similar Messages

Maybe you are looking for