Issues with XFA to HTML5 Convertion in Livecycle ES4

We are working on the feasibility check for rendering the dynamic XFA form within our application to enable end user to fill-in and save the form.  We used LiveCycle Designer ES4 for designing the forms. Everything works fine with the PC but when tried to load in iPad the form didn’t load at all.
We tried LiveCycle ES4 to convert the file to HTML5 to render in iPad. But it doesn’t look neat as PDF.  Listed below the issues we are facing.
1.       Data binding not working for few columns though it works perfectly in PDF version
2.      Tables are not aligned properly based on the number of rows, the following table/controls getting overlapped on the table.
3.      Submit button takes the page to WebAPI (used for Saving the entered form) url instead of saving the content. When invoked from the PDF it saves properly.
Please provide any standards/guidelines for designing the document which will be converted to HTML5 correctly.
Also, we would like to know the pricing of LiveCycle ES4 and is there any lightweight mode available which just does the XFA to HTML5 conversion. The LifeCycle ES4 comes with distributable license?
Regards, Jawahar

LiveCycle is divided into separate products such as LiveCycle Forms, LiveCycle Output, LiveCycle Rights Management and many more. You may choose the suitable forum from the product list here: Adobe LiveCycle
Good luck!

Similar Messages

  • Issues with XFA to HTML5 Convertion in Livecycle server

    We are working on the feasibility check for rendering the dynamic XFA form within our application to enable end user to fill-in and save the form.  We used LiveCycle Designer ES4 for designing the forms. Everything works fine with the PC but when tried to load in iPad the form didn’t load at all.
    We tried LiveCycle server to convert the file to HTML5 to render in iPad. But it doesn’t look neat as PDF.  Listed below the issues we are facing.
    1.       Data binding not working for few columns though it works perfectly in PDF version
    2.       Tables are not aligned properly based on the number of rows, the following table/controls getting overlapped on the table.
    3.       Submit button takes the page to WebAPI (used for Saving the entered form) url instead of saving the content. When invoked from the PDF it saves properly.
    Please provide any standard/guidelines for designing the document which will be converted to HTML5 correctly.
    Also, we would like to know the pricing of LiveCycle server and is there any lightweight server mode available which just does the XFA to HTML5 conversion. The LifeCycle server comes with distributable license?
    Regards, Jawahar

    LiveCycle is divided into separate products such as LiveCycle Forms, LiveCycle Output, LiveCycle Rights Management and many more. You may choose the suitable forum from the product list here: Adobe LiveCycle
    Good luck!

  • Issue with xfa.event.change in XFA 3.3

    HI all
    I've found an issue with the way that XFA 3.3 processes the script below on a change event when a user paste's more than 1 character to a textfield.
    var sChange = xfa.event.change;
    if((sChange.length>1)){
        app.alert("Bad User\nCopy and paste has been disabled for this field");
        //discard the change
        xfa.event.change = "";
    in XFA 3.0 the alert is sent and change is removed, in XFA 3.3 the alert is sent but the change persists.
    Any Ideas?

    Hi Mark,
    Unfortunately thats not possible as I'm using Flash Fields with data being passed between the PDF and the Flex app which only works in XFA3.3, let me know when its fixed.
    Kind Regards
    Kevin Mortimer
    Solutions Archtect
    Avoka

  • Can anyone help with a compatibility issue with EZ vinyl/tape converter?

    I have been using EZ Vinyl/Tape Converter in conjunction with an ION turntable to transfer all my old vinyl into iTunes.
    I have had no problems until the latest version of iTunes was downloaded and installed.
    Now, if I attempt to import a track using EZ, it tries to import into iTunes for a couple of minutes, before giving me an error message which says "Make sure all active windows in iTunes are closed".
    I have no idea what this means, because I'm doing nothing any differently to what I've always done.
    Can anyone suggest what might have changed?
    Thanks in advance.
    Mel

    i have same problem too any suggestions anyone pls have so much music with vinyls to keep help

  • I am having an issue with excel opening a converted file

    After I have converted this file from a pdf file to a .xlsx it won't open in excel. Now what do I do? I over wrote what I have done thinking it will work. How can I get this to work?

    HI demonicangel,
    I'm sorry that you're having trouble with your converted file. Does Excel return an error when you try to open the file?
    But the PDF you converted was not overwritten in the conversion process--it remains intact where it was when you converted it. So, you should'nt have lost any work.
    Please let us know what happens when you try to open the file in Excel.
    Best,
    Sara

  • Issue with document text - converting from PDF to Word

    I have used Adobe Reader in the past with no issues.  Today, I tried to convert a PDF to a word document.  It worked, but the text all changed to wingdings font (even though it says it is Calibri).  Any suggestions?

    Hi marleighp23001196,
    Are you facing this issue with a specific file or with other word files too?
    Regards,
    Rahul

  • Display issue with LiveCycle Designer ES4 for cropped PDF in WIN7

    Hi,
    I am having issue displaying the cropped PDF file in the LiveCycle Designer ES4. The PDF files are cropped 3 inches from bottom using Adobe Acrobat 8 Professional. It used to display properly when we have a WinXP machine but once we moved to a Win7 machine, it cannot display the top part of the PDF anymore. Can anyone help on how to fix the display issue? Thanks.
    Kenny
    Environment:
    Adobe LiveCycle Designer ES4 V11.0.0.2013.0303.1.892433
    Adobe Acrobat 8.0.0
    Screenshots
    Win 7, LiveCycle Designer does not display properly
    Win XP, LiveCycle Designer used to display properly

    Thanks vNohria.
    I am having same issue with Adobe Acrobat 9. The Acrobat 9 cropped file is displaying properly under WinXP but have the same issue as above in Win7. This issue seems uncommon as I tried to look for similar issue  and couldn't find any.
    P.S. It's only the Design View in Win7 that has the issue, I can still see the file fine with Preview PDF in both enviornment.
    Design View:
    Preview PDF:

  • Livecycle forms rendering issue with Adobe reader 10.1

    Hi,
    I have designed a form in XFA 3.1 (Livecycle ES2 9.0). It works perfectly up to Adobe reader 10.0.3. Now when I am opening the form in Adobe reader 10.1.0 or above, the forms is showing some strange behaviors.
    1. For some of the drop downs, the text is not visible on screen although a value is selected which I confirmed by printing in a alert box.
    2. The calendar control look and feel has changed. the "Today's date" is showing up as a hyperlink (in light blue). However, the last two digits of the year of the "Today's Date" are not showing as a link and does not respond if I click on them.
    Could this be a possible compatibility issue between XFA 3.1 and Adobe reader 10.1? Will upgrading the designer to a more latest version (and XFA 3.3) help in resolving this issue?
    Please advise. Many thanks!!

    Dear Marcik565,
    The same workflow is working just fine for us. Could you please send us the screenshot of the print dialog at your end?
    Thanks,
    Atul Agarwal
    Adobe Systems

  • LiveCycle designer 8.2 issues with Office 2010

    Good Day All;
    We are in the middle of upgrading from Windows XP / Office 2003 to Windows 7 (32bit) / Office 2010 and I was wondering if there are any issues with Livecycle designed and Office 2010.
    I have been that Adobe Acrobat 8.2 does not support Office 2010. I ran into that with trying to install PDF maker.
    Any comments will be helpful.
    Regards
    Chomp

    We recently upgraded to Win 7 and to Acrobat 9 (didn't upgrade Office so cannot comment on that). The only issue I have found (and I can only assume it was
    due to the OS upgrade or the Acrobat upgrade (or both)) is that I lost use of my Preview tab. In order to be able to preview a form now in LiveCycle, I must first open an instance of Acrobat, otherwise I don't even get a Preview tab. Also, the preview doesn't show up in the Preview tab...it actually opens in Acrobat.
    Weird, but I'm getting used to it.
    Jo

  • Unable to convert pdf's with XFA forms

    Why can I not convert a PDF file with XFA forms to Word?

    XFA is its own little world, and very few tools will touch it. In any case, ExportPDF isn't for converting filled in forms, I think.

  • Captivate 6 HTML 5 issue with scalable HTML5

    Hi,
    I am using Captivate 6, I have a very small project of only about 10 slides but when I publish this to 'scalable HTML content' all the shapes dissapear, and certain slides don't work at all.
    However, when I take off 'scalable HTML5 content' it works fine. My issue is, because this will be used on different tablets of all sizes its hard to chose the 'apple ipad' size of project when some people have android tablets because then it does not fit on the screen!!
    Is there anything I can do to make sure it does work for all tablet sizes as the 'scalable' content is not working at all!!!
    Thanks!

    Hi Hannah,
    Great to hear that it is working! I have seen these bizzare issues with Captivate and that was the only reason I suggested a copy paste at first. The only thing could be the corruption of the project.
    I am glad that its resolved.
    Thanks!
    Shekhar

  • Issue with TOC overlaying MP4 embedded video in Firefox (Captivate 7 HTML5 output)

    Only in Firefox, I am coming across an issue when I have a video embedded on a slide, the overlaying Table of Contents displays but is not clickable. This is both when the video is paused and playing. The TOC comes over the embedded video area on the slide. I have considered it is possibly a z-index issue with Firefox, but really need a workaround.
    Firefox 28.0, Captivate 7 HTML5 package, MP4 video

    Hello Kris,
    Please check your output in other browsers like Internet Explorer and Google chrome as well.
    HTML5 output from Captivate is tested and supported only on below browsers
    Internet Explorer 9 or later
    Safari 5.1 or later
    Google Chrome 17 or later
    http://helpx.adobe.com/captivate/using/publish-projects-html5-files.html
    Thanks

  • Issues with converting to PDF and zoom size

    I've created a Captivate file and converted this to Adobe PDF - when we have tested the output we notice a white edge on the left and bottom side of the document and encounter issues with 'zoom' on pdf - when its 100% its fine (apart from the white edge), but when we reduce the zoom it covers the project and exposes only a small amount of it.
    Any ideas?

    I've created a Captivate file and converted this to Adobe PDF - when we have tested the output we notice a white edge on the left and bottom side of the document and encounter issues with 'zoom' on pdf - when its 100% its fine (apart from the white edge), but when we reduce the zoom it covers the project and exposes only a small amount of it.
    Any ideas?

  • Issue with Captivate 8 using IE with HTML5

    I discovered a rather unique situation with Captivate 8 and IE.  We have a SuccessFactors LMS with the content stored on a CDN server (cross domain environment).  I found that when we launched modules created with Captivate 8 using Internet Explorer (ver 9 and higher) we would get a blank page. The same modules published with captivate 7 worked fine.  I discovered that the index.html file was different between the Cap7 and Cap8 versions.  The Cap8 version has 2 new lines in it:
    function OnLoad_Activities()
    var lFrameset = document.getElementById("myFrameset");
    var newFrame = document.createElement("frame");
    newFrame.id = "scormdriver_content";
    newFrame.name = "scormdriver_content";
    newFrame.width = "100%";
    newFrame.height = "100%";
    var lParamString = window.location.toString().split("?")[1];
    The newFrame.width and newFrame.height lines are the new lines.  If I comment them out, the page loads just fine.  Apparently IE has an issue with this.  has anyone else run into this problem?

    Hello ,
    Welcome to Adobe Forums !
    Could you please check the version of Captivate you are using to publish (Go to Help > About Adobe Captivate) ?
    Also check the version of Scorm you are using , Try switching between Scorn 1.2 to Scorm 2004 or vice versa .
    Also try renaming the published output try to keep it simple , means without spacing or any special character.
    Regards
    Himanshu

  • J2SE adapter PI 7.1 issue with XML to flat conversion and namespace length

    Dear reader,
    We are facing an issue with J2SE Adapter PI7.1 for a number of flows.
    The flow requirements:
    [1] Namespace length for interfaces is up to 100 characters
    [2] The XML message must be converted to Flat on the adapter channel
    Our PI system is at patch level 7 and we implement J2SE adapter on patch level 7 as well.
    We found that the J2SE adapter on patch level 7 does not support long namespaces [1] (as it should since this is an PI 7.1 j2SE adapter) but no issues where found with the XML to flat conversion [2].
    Experimenting with J2SE adapter on patch level 6 we found the long namespaces [1] are supported however an issue is found with the XML to flat conversion [2] as stated in SAP note 1335527.
    An SAP Customer Message is raised on this issue however your input is highly appricated!
    With Kind Regards,
    Harald Kastelijn
    Edited by: Harald Kastelijn on Mar 6, 2010 9:17 AM
    Edited by: Harald Kastelijn on Mar 6, 2010 9:19 AM

    We found that the J2SE adapter on patch level 7 does not support long namespaces [1] (as it should since this is an PI 7.1
    j2SE adapter) but no issues where found with the XML to flat conversion [2]
    I think the restriction of namespace length still remains in design time (IR).....the same however has been extended in configuration and runtime...this SAP note has some information: https://service.sap.com/sap/support/notes/870809

Maybe you are looking for

  • Installing Windows XP from Old PC Hard Drive Without Installation CD???

    Hi, Let me first say I'm a brand new mac user and loving my new macbook pro. A major issue I'm having is that I'm in real estate and can't use my online MLS System without running Windows. I hooked up my old IDE hard drive via USB 2.0 adapter thinkin

  • Question on Issue with fmt:formatNumber tag of jstl

    Hi, We have a web application that uses struts framework. In the action class,i am setting an attribute of request object like request.setAttribute("Val",new Double(11.25489)); I am using jstl fmt:formatNumber function in the jsp page to format the v

  • Telephone number

    When I purchased my 16gig WiFi 3G iPad last December, I went to Telus Mobility (here in Canada) and got my iPad setup for 3G.  Because 3G is like my data plan that I have for my Blackberry, I learnt that my iPad has a telephone number assigned to it.

  • Imovie will not show new photos from iphoto?

         The imovie project I'm working on needs several photos that I recently downloaded.  However when going into the photo section of imovie these new photos do not appear in the album that they have been placed in. Is there anyway to get them to app

  • How do I open a WPS file

    how do I open a WPS file with an iMac OSX?