Ist eine AirPort Extreme als Repeater verwendbar?

Ich möchte mir ein wohne in einem dreistöckigen Einfamilienhaus und möchte in meinem Zimmer im obersten Stock ein verbessertes WLAN- Signal erhalten. Ist die AirPort Extreme Station dafür geeignet als Repeater verwendet zu werden?
Oder kann man dazu auch Time Capsules nutzen?

Hab dafür eine Airport Express. Müsste daher auch mit einer aktuellen Airport Extreme gehen.
Best Answer
Yes, you can use the Airport Extreme as a repeater or a network Extender. When you're setting it up with the Airport utility software, simply put it into repeater mode. The Airport Extreme has a range of at least 250 meters, which is about 820 feet, which is pretty impressive!

Similar Messages

  • Airport Extreme als Repeater oder zu Netzwerk hinzufügen

    Hallo,
    ich bin im besitz eines Würfels vom Anbieter 3 (DREI) und einer Airport Extreme.
    Ich würde gerne meine Airport Extreme als Repeater nutzen oder mit dem Netzwerk vom Würfel verbinden, nur keines von beiden funktioniert.
    Jedes mal wenn ich im Airport Dienstprogramm meine AE für "Netzwerk verbinden oder erweitern" konfigurieren will, sagt er mir ständig "Beim Konfigurieren der Airport Extreme ist ein Fehler aufgetreten" und dann findet er die AE nicht mehr. Dann muss ich jedes mal an der AE den Restart-Knopf drücken damit ich wieder von vorne anfangen kann.
    Ich kann leider auch im Internet nichts dazu finden, nur über Airport Express aber das bringt mich ja auch nicht weiter.
    Vl kann mir ja hier jemand helfen???
    ...mein Ziel: Würfel von 3 im Wohnzimmer > Airport Extreme als Repeater im Keller > Q-NAP NAS via LAN, Epson Drucker und Apple TV via WLAN mit Airport Extreme verbunden > alle angeschlossenen Geräte bei AE im Netzwerk und Internet für Fernzugriff freigeben
    nur bei mir scheitert es leider schon bei der Netzwerkverbindung
    Bitte um Hilfe!!

    Hab dafür eine Airport Express. Müsste daher auch mit einer aktuellen Airport Extreme gehen.
    Best Answer
    Yes, you can use the Airport Extreme as a repeater or a network Extender. When you're setting it up with the Airport utility software, simply put it into repeater mode. The Airport Extreme has a range of at least 250 meters, which is about 820 feet, which is pretty impressive!

  • Airport Express als Repeater?

    Ist es möglich ein Airport Express als WLAN-Repeater mit einer FritzBox 3390 als Basisstation zu verbinden?
    Kann die Airport Express auch über LAN-Kabel mit der FritzBox verbinden, so daß ein einheitliches Netz (z.B. 192.168.10.*) entsteht? Und falls ja, ist die Verbindung über den WAN-Anschluß oder einen LAN-Anschluß der Airport Express herzustellen.

    Ja, Sie können die AirPort Express als Repeater für die FritzBox verwenden, indem Sie die beiden mit einem Ethernet-Kabel. Verbinden Sie das Kabel mit dem WAN (Kreis Punkte) Anschluss auf der Express. Dann konfigurieren Sie beide Router für ein Roaming-Netz.

  • Airport extreme fritz repeater

    hat jemand erfahrung wie man einen fritz repeater N/G mit einer airport extreme koppelt?

    Da die Flughäfen mit den meisten, wenn nicht alle, Wireless-Repeater, die nicht von Apple sind nicht kompatibel sind, gibt es kaum eine Chance, dass die Fritz-Repeater, die Sie erwähnen, werden daran arbeiten, die Funkreichweite verlängern.

  • How do I setup Airport Extreme to repeat my BT router wireless signal?

    I have a BT router and want to setup 3 x airport Express to repeat the signal wirelessly around the house.
    They all seem fine with steady green lights but are not repeating the wifi so I get very low (or no) signal strength even if I stand right next to it.
    Do I have to have an Apple base station or will they work with a non-apple router?

    Do I have to have an Apple base station or will they work with a non-apple router?
    Unfortunately, the Apple routers will only "extend" or provide more wireless coverage using wireless only...if they are used with another Apple product.
    If you added an AirPort Extreme to your BT router using an Ethernet connection, and then configured the Extreme to create a wireless network...the Express devices would be able to "extend" that network.

  • Airport Extreme as Repeater for FritzBox 3390

    Hello!
    I want to enlarge my LAN and WLAN at home. In my LAN the connection to the internet is done with a Fritz!Box 3390.
    Is it possible to connect a Fritz!Box 3390 as base station with an Apple Airport Extreme for instance as a WLAN repeater?
    Is it possible to enlarge my LAN via ethernet cable with one certain IP address (e.g. 192.168.10.*) by connection with an Airport Extreme? And if so, must I use the WAN adapter or a LAN adapter of the Airport Extreme? For my devices I have the need of at least three additional LAN connections.
    Thanks for help,
    Michael

    Apple has designed their AirPort routers to be compatible with other AirPort routers for the purpose of extending the network wirelessly.
    So, it would be extremely unlikely that an AirPort router could extend the signal from your FritzBox router.
    If you decide to try the AirPort Extreme, it would be a good idea to make sure that you can return the product if it does not work......since there is almost zero chance that it will work.

  • Ich habe eine Airport Extreme durch eine Time Capsule ersetzt. Kann ich die Extreme als Repeater verwenden?

    Ich habe alles probiert und den Eindruck, dass die Verbindung nicht besser sondern schlechter wird. Wie muss die Extreme konfiguriert werden um die Reichweite des Netzes zu erweitern.

    Wenn Ihre beiden Flughäfen 802.11n-Modelle sind, überprüfen Sie bitte diesem Apple Support-Artikel sicher sein, dass Sie dieerweiterten Netzwerk richtig konfiguriert haben.

  • Wie kann ich per iPhone/iPad und Windows-Pc auf die Festplatte an meinem AirPort Extreme zugreifen?

    Habe ein AirPort Extreme gekauft und ne Festplatte drangehängt, allerdings kann ich obwohl sie freigegeben ist (zumindest denk ich das) nich darauf zugreifen.
    Kann mir jemand sagen wie das geht?
    sowohl per iphone ipad als auch windows Pc!

    You must copy the music from the Windows PC to the iMac, and then from the Mac to the iPhone.

  • Airport Extreme mit Angeschlossenen DroboS

    Silk few weeks, I can not make any more backups to the Drobo S with version 7.6.3 Airport Extreme with a USB cable Connected. Went up a few weeks ago Actually getting rid of problem with the backup with Time Machine Mac OS X version .
    I take a can further help me secure forgive me my english is not my native language.
    Seid einigen Wochen kann ich keine Datensicherungen mehr machen mit dem DroboS mit Airport Extreme Version 7.6.3 über ein USB Kabel Verbunden. Ging bis vor wenigen Wochen Eigentlich immer Problem los mit der Datensicherung mit TimeMaschine MAC OS X Version 10.8.3.
    Ich nehme ein einer kann mir Sicher weiter Helfen verzeiht mir mein Englisch ist nicht meine Muttersprache.

    Ihren Time-Machine Konfiguration funktionieren nicht richtig werden. Es gibt nur drei Konfigurationen für Time Machine zu die Datensicherung: Time Capsule, FireWire, USB- und Thunderbolt-Volumes.
    Für die Datensicherung mit Time Machine, kann keine externe Festplatte, die mit einer AirPort Extreme Base Station verbunden ist verwendet werden.
    Time Machine führt keine Backups auf AirPort-Laufwerken in AirPort Extreme durch
    OS X Mountain Lion: Mit Time Machine verwendbare Volumes

  • Einstellungen von Airport Extreme übernehmen?

    Kann man die Einstellungen einer Airport Extreme unkompliziert auf eine Time Capsule übernehmen?
    Möchte meine Airport Extreme durch eine Time Capsule ersetzen und die Einstellungen übernehmen, da das Einrichten der Airport Extreme nicht gerade leicht war.

    Ja. Kein Problem. 50 Mbps nicht übermäßig ist.

  • How do you update the firmware on 1st Gen Airport Extreme in OSX Mountain Lion?

    A friend gave me a old but never used 1st Gen Airport Extreme 802.11n WiFi Wireless Base Station.  I have a couple WiFi dead zones in my house and was told that I could daisy chain the Apple Airport Extreme off of my Verizon FIOS router/modem (802.11G) to fill in the dead spots.  During set up the Airport Utility told me that "This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later.  Go to AirPort Service and Support (link) for more information. 
    I updated the Airport Utility to the latest version (6.2) and I am still getting the same error message and no other option to update it's firmware.  Anyone know of a work around or am I fighting to losing battle here.  I tried to contact Apple support, but when I entered the serial number for the Base Station it said the product was over 5 years old and didn't qualify for support service program.

    was told that I could daisy chain the Apple Airport Extreme off of my Verizon FIOS router/modem (802.11G) to fill in the dead spots
    Not sure what you mean by "daisy chain".  The AirPort Extreme cannot "repeat" or "extend" the wireless signal from the FIOS router if you are planning to do this using wireless only.
    You always need at least 2 Apple routers to be able to "extend a wireless network" using wireless only. The Apple routers would not be compatible with FIOS routers for this type of purpose.
    If you can connect the AirPort Extreme to the FIOS router using a permanent wired Ethernet cable connection, then the AirPOrt could be configured to provide more wireless signal coverage that way. If you cannot run the cable, it might be possible to use a pair of Ethernet powerline adapters to send a signal over the existing AC power lines in your home.
    When you open AirPort Utility 6.x and a firmware update is available, there is usually a red number next to the AirPort Exreme icon. Click on the red number......or if it does not appear, click on the  AirPort Extreme icon and then hold down the option key on a Mac as you click on the Version number that is is displayed to see more "options".

  • Airport Extreme Telekom Zugangsdaten

    Hallo,
    ich habe eine Airport Extreme gekauft und möchte mit dieser über einen TELEKOM DLS Modem/Router ins Internet.
    Dazu müssen in der Konfiguration des Airport Extreme die Zugangsdaten zur Telekom hinterlegt werden.
    Diese werden von der Telekom wie folgt angegeben:
    Anschlusskennung:                                   111111111111
    Zugangsnummer (vorher T-Online Nummer:) 111111111111
    Mitbenutzer Nummer:                                 1111
    Persönliches Kennwort:                              11111111
    Wie und in welcher Reihenfolge müssen diese Daten im Airport-Dienstprogramm eingegeben werden?
    Hier stehen folgende Felder zur Verfügung:
    Account Name:
    Kennwort:
    Dienstname:
    Hat schon jemand dieses Problem besiegt?

    If you have set up the AirPort Extreme again and the amber light is flashing......AirPort Utility will tell you why.
    Open AirPort Utility
    Click on the AirPort Extreme icon
    Look for the setting for Status
    Click on the amber dot there
    What does the message say?

  • Airport Extreme (latest generation) is rejecting password

    My airport extreme is repeatedly rejecting passwords from a whole range of devices until it is rebooted. This is happening every couple of days. Any suggestions?
    Here's some info:
    Airport: 7.5.2
    Security: WPA2
    Channels: 48; 10
    Channel 10: RSSI = -81, Noise = -92, S/N = 10
    Channel 48: RSSI = -86, Noise = -92, S/N = 6
    MAC access: timed (all day, every day using Mac addresses)
    I've checked other local networks. They are all running on channel 1.
    It's all Apple gear that's being dropped off the network.
    Thanks

    Most important is antenna design.

  • Ich habe eine externe festplatte an meinen airport extreme angeschlossen welche ich über time machine laufen lassen möchte, jedoch funktioniert dies nicht..? beim ersten update geht es meistens, jedoch springt es danach aus.?

    hilfe?

    Leider ist dies nicht eine unterstützte Konfiguration. Time Machine erfordert eine lokal angeschlossenen Volumen oder Time Capsule.
    Ihre Konfiguration mit einem AirPort Extreme wird berichtet unzuverlässig zu sein:
    Hinweis: ... Time Machine kann keine Backups auf eine an AirPort Extreme angeschlossene externe Festplatte, Time Capsule oder eine für Microsoft Windows formatierte Festplatte ...
    Mac-Grundkurs: Time Machine

  • How do I connect my airport extreme to wifi as a repeater

    how do I connect my airport extreme to wifi as a repeater?

    Thanks for the info.
    Unfortunately, Apple has designed their routers to only extend or repeat the wireless signal from other Apple routers.
    It would be extremely unlikely that the AirPort Extreme would be able to extend or repeat a wireless signal from another manufacturer's router.
    I suppose that it could not hurt to try, but if the Extreme is still unopened, it might be a better idea to return the Extreme, get the information about the router at the neighbor's and then use a product from the same manufacurer that would be compatible to repeat or extend the wireless.

Maybe you are looking for

  • How to make java7 update 10 work with safari?

    Hi! I´ve just downloaded the Java7u10, and it wont work with Safari. I´m unable to log into my bank. Is there a way to deal with this one? Uninstall the Java7u10? how in that case? Or is there a systemthing to adjust? thanks for any help! I run OS X

  • Options screen opens so big the top is cut off and cannot use

    This recurs and cannot fix. The options screen(box) opens so big the top is cut off and cannot access anything but the general screen? I have my resolution set to native 1600x900 100%. Decreasing page (home page) size does not help. I am running Wind

  • Sorting of billing items

    Hi Experts, I need a way of sorting billing document items according to a sequence entered in the SD document, could be  the customers PO order item, any ideas of how to do ? BR lene

  • AD Group Discovery - Limit to an OU & run Full Discovery now

    Hi folks, I have a doubt ....the ConfigMgr Admin Console UI lets me do these two things (attached screenshots):  1. First I can add discovery scopes for the Group Discovery   2. Run the Full discovery now. I was wondering if both are possible through

  • Stanard search help -default values change

    I have assigned a search help to sales order like this SELECT-OPTIONS   :s_vbeln     FOR  gv_vbeln MATCHCODE OBJECT  VMVA. When i press F4 i get select options correctly.But in select options there is a field Called Transaction group which will be de