Istat menus version 3.23 not working correctly on MBP mid 2012
I purchased iStat menus for my MBP (no r) mid 2012 and it does not seem to work right. It seems to install ok without any messages popping up but once installed where I get the chosen options onto the menu bar I have a problem.
When I click on say CPU or any of the others, a window shows the details but when I then click in that window, at the bottom on EDIT I get a message saying:
Tried uninstalling iSta menus and reinstalling but no go.
Can anyone help?
Thanks
You are on the other side of the world! I don't use iStat. No need to.
The only thing I can suggest is to either trash its .plist file if it has one or trash it altogether and reinstall iStat.
Similar Messages
-
Handoff not working with Macbook air (mid 2012)
So, I just updated to Yosemite and I have enabled all the settings on my Macbook Air (mid 2012), iPhone and iPad. Turned on blutooth, same wifi network, etc... Handoff DOES work from my Mac to the iPhone but will not work from my iPhone to my mac. I've searched high and low and can't figure out why its not working... Any ideas?
*UPDATE* I was able to drop a file to my iPhone via AirDrop FROM my MBP to iPhone. However, I've still been unable to do the reverse (iPhone to MBP).
Same exact situation with same exact MBP (mid 2012 machine). iPhone 5S running iOS 8. I had been trying to go iPhone to MBP for about 30 minutes with no success. Neither Handoff or AirDrop would work. The MBP would recognize the iPhone in AirDrop, but the iPhone would never recognize the MBP as a location to "drop" to.
After reading you post, I tried the reverse (MBP to iPhone). I started an e-mail and got the mail icon on my iPhone lock screen. However, when trying to access the message on the iPhone i received connectivity errors and the "draft" never loaded.
Perhaps the server on the cloud they use for the handoff/airdrop/continuity feature is overloaded due to the rollout. Either way it's entirely more complex to use then it should be. -
4 random Rows of pixels not displaying correct colors RetinaMBP mid 2012
Dear community, I noticed that my 15' Retina MacBook Pro, mid 2012 has some retina screen issues. As mentioned, 4 randomly possitioned rows (from side to side) of pixels have difficulty displaying the correct colors. It is unnoticable on light and dark backgrounds/images. However when you have color, they show clearly. Two of the rows appear lighter than the image color, the other 2 darker. Sometimes the color is completely different. It also happens under Windows7 Bootcamp and does not display on external monitors = Hardware failure. I have never ever droped, pressed, hit or abused my RMBP, expecially the screen.
Has anyone heard or experienced similar issues?
What could be the problem? Would be okay for a few dead pixels but those are 4 whole rows of pixels. Also they all seemed to fail at ones, not 1 row at a time.
Thanks.Run your page through the validator here: http://validator.w3.org
You have some structural defects in your code that should be taken care of. If it's still not working once you have the code cleaned, post back and we can take a closer look. -
External microphone not working on mac mini mid 2012
i bought a general electric external headset/microphone for my mac mini. i plug it in and it does not work.... please help because i broadcast on a radio station and need a working mic.
How many plugs does it have?
-
Audio not working...MBP mid 2009 to HDMI
I have my MBP hooked to Sharp Model LC-C32370 with Mini Displayport to HDMI cable(belkin), using Belkin Aux cable plugged into MBPro's headphone port and then to TV....audio still not working. Any suggestions?
On the Thunderbolt to HDMI converter/cable I have for mine, the volume controls don't work in System Preferences. As per the maker's indications, I use the Audio MID Setup utility to control it. Yours may work likewise.
-
AirPlay Mirroring not working on MacBook Pro (Mid 2012, OS X 10.7.4)
I am trying to mirror the display of my MacBook Pro (Retina, 15-inch, Mid 2012, OS X 10.7.4) to my TV using the latest AppleTV. AirPlay works from iTunes to the AppleTV, but I don't have an AirPlay icon in my Display Preferences to project whatever's on the screen to the AppleTV. What could be wrong..? Thanks in advance.
You need to update to Mountain Lion. Purchase it in the Mac App Store.
-
Camera not working on MBA 13" mid 2012 with OS X 10.9.1
The built-in camera is not being recognized by anything - Skype, FaceTime, PhotoBooth, you name it.
There are no updates available and I've tried rebooting, so I have no idea what to do here.
Does anyone have suggestions, please??Intel-based Macs: Resetting the System Management Controller (SMC)
-
I just updated the last version of OSX Mavericks on my MAc Pro and my thunder bolt display is not working correctly. Could you please help
Reset the NVRAM/PRAM and Reset the SMC, then try again.
-
Safari hierarchical menus not working correctly
Hello all,
I'm having a problem with Safari's hierarchical menus not working correctly. They pop out in odd positions, and--worst of all--the big ones (for folders that contain lots of bookmarks) pop out right on top of the main bookmarks menu, making it all but impossible to navigate that main menu. I've tried all the usual tricks: log out/restart the system, restart Safari, reset Safari, boot in safe boot mode, repair permissions, yank Safari's bookmarks prefs file, even reinstall Safari, and nothing worked. I've also noticed the same behavior in Camino. My system hierarchical menus work fine, though, so I'm thinking I have a corrupt prefs file somewhere. I'm using Safari 4.04 with no extra plugins beyond what come with it on 10.5.8. Does anyone know what's going on and how to fix this?AFAIK, the submenu will pop on either side, depending on available space and if there are further subfolders, allowing them to continue in the same direction.
Since the new account doesn't exhibit the issue, there are two ways to attack the problem. One is to log into your new account, make a list of the preference files (plists) located in /username/Library/Preferences/, including any in the ByHost subfolder, log back into the original account, move everything not on that list into a newly created folder on the Desktop, log out and back in, and see if the problem goes away. If so, you can copy the ones in the Desktop folder (one at time) back into /Preferences/, restart, and see if the problem returns. If so, you've identified the corrupt/conflicting one. Continue with all of them until isolating the bad ones. That'll save you the trouble of resetting preferences.
The second way is much more detailed and I'll not burden you with the steps unless the above doesn't fix the issue. -
I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is button click event message box or popup window will not working correctly. Please any one suggest me the steps to overcome this not responding or slowness in the responding problem of Button click event.
Hello,
In Firefox 23, as part of an effort to simplify the Firefox options set and protect users from unintentially damaging their Firefox, the option to disable JavaScript was removed from the Firefox Options window.
However, the option to disable JavaScript was not removed from Firefox entirely. You can still access it from about:config or by installing an add-on.
'''about:config'''
# In the address bar, type "about:config" (with no quotes), and press Enter.
# Click "I'll be careful, I promise"
# In the search bar, search for "javascript.enabled" (with no quotes).
# Right click the result named "javascript.enabled" and click "Toggle". JavaScript is now disabled.
To Re-enable JavaScript, repeat these steps.
'''Add-ons'''
You can alternatively install an add-on that lets you disable JavaScript, such as
*[https://addons.mozilla.org/firefox/addon/noscript/ No-Script] (to disable JavaScript on a per page basis, as required)
*[https://addons.mozilla.org/firefox/addon/quickjava/ QuickJava] (to easily disable and enable JavaScript, automatic loading of images, and other content)
Thank you and I hope this helps! -
When I opened Gmail in my Firefox browser, I got a message I've never seen, before: "You are using an old version of Firefox which Gmail no longer supports. Some features may not work correctly. Upgrade to new version." I clicked on upgrade to a new version and was taken to the Mozilla site, where I downloaded the latest version of Firefox... then, when I restarted my computer, Gmail still gives me the same message!! What's going on?
Firefox 4 and later require at least OS X 10.5 and a Mac with an Intel processor.
*http://www.mozilla.org/firefox/12.0/system-requirements/
For an unofficial Firefox ESR 10.0.4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
*http://www.floodgap.com/software/tenfourfox/
*http://www.macupdate.com/app/mac/37761/tenfourfox
Be aware that TenFourFox doesn't support plugins.
*http://code.google.com/p/tenfourfox/wiki/ReleaseNotes1004
*http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
*http://code.google.com/p/tenfourfox/wiki/AAATheFAQ -
I have OSX 10.7.5 on my imac, my idvd is not working correctly. Should I re-download this version again , do you think that it will help to improve the idvd operation?
First, iDVD is not and never has been part of OS X. If iDVD is not working correctly, then you should investigate possible problems with that application, support files, preferences, or cache.
Of course you can always reinstall OS X if you wish:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
If statement within a view is not working correctly ?
Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
</htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias HlubekMatthias,
The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is <b>NOT</b> initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian -
Email pushing not working correctly for office email - 3 seperate devices/carriers
We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin TalbotPotential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile] -
LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly
Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
Anybody know of a way round this?Hi @dnhowes ,
I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Was it the Nvram reset back to factory settings that you tried or a hard reset?
Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
I find that on the Lab printers when I am selecting different menus.
If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP
Maybe you are looking for
-
I'm trying to set up my new iPhone using iCloud - I entered my apple ID and password and selected the backup to restore from but the next page asks me to enter a password for a DIFFERENT apple ID
-
Query Builder - Tables not Appearing
Hi, I am encountering a problem when trying to use Query Builder. If I have a table that is joined to by more than one other object and wish to drag TWO instances of this table into Query Builder, it will not allow it to happen. It doesn't give any e
-
Here is my class for a sliding panel. The class is released as open source. Please feel free to feed this into your IDE and provide feedback for improvement. Known issues include: double clicking the component2 to be shown, some flickering in graphic
-
Can anybody send to me E-mail validation code? Please don't send below code again. This is not working properly. please send a perfect E-mail validation code. Thank you. public static boolean validEmail(String strEmail) Pattern pat=Pattern.c
-
hi!, I work as an IT manager. I am considering using Oracle for my company's needs. I need to be aware of certain issues before installing Oracle. 1) What are the different Oracle versions ? 2) What are the features that were added with each version