Istheir any way by which i can MODIFY the Primary Set of Books option inSOB

Hi,
Is thier any way , to change the primary/reporting set of books option , which is enabled in MULTIPLE REPORTING CURRENCY TAB in "Set of Books" winow in Financial applications.
Once defined , I was not able to change the option.
Rgds

Hi Sumit,
Thanks for reply.
But what i meant to say is:
Initially while defining Set of Books window , In the "Multiple Reporting Currencies"Tab,
If suppose we have enable Set of Books Type as "Primary Set Of Books", then
Is thier any way we can modify it again to "Reporting Set of Books"type or "Not applicable"type .....either in the Back End or Front End.
Or else, u advise me to create new SOB altogether.
Regards

Similar Messages

ARE THERE ANY WAYS BY WHICH I CAN FIND THE Appln Servlet Container Memory

ARE THERE ANY WAYS BY WHICH I CAN FIND THE Appln Servlet Container Memory .

You can check out Tomcat memory usage using Tomcat Manger
and clicking server status.
It gives the information like this
Free memory: 489.80 MB Total memory: 508.12 MB Max memory: 1016.12 MB
For specific application stats, i think there are some profilers which u have to search in google.

Is there any way by which I can not use Thunar Sys Tray icon?

I am using stalonetray in OpenBox in Arch and when I copy-paste or cut-paste files in Thunar, a sys tray icon pops up. I don't want it to pop up.
Is there any way by which I can make it to not pop up?

Trilby wrote:
I haven't used thunar for a while - but I don't remember it ever doing this before. I just verified that it doesn't here (freshly installed thunar, and cut-pasted, copy-pasted, etc, and I didn't get a tray icon.
Are you sure this isn't some other tool, like a clipboard manager? Are their any tooltip popups or menus available on the tray icon and/or what happens when you click the icon?
No. I use only Thunar. When I hover on the icon it says that "1 file operation running" when a copy-paste or cut-paste operation happens and when I left click and right click on it, it shows the copying window of thunar. The icon shows two small yellow folders placed diagonally. It's the same icon that appears on the file operation progress window of Thunar. I don't know whether Numix has anything to do with the specific icon though.
Last edited by chosentorture (2015-01-11 00:13:32)

Is there any way through which I can stop download of my ABAP programs???

Dear all,
I want to know is there any way through which I can stop download of my ABAP programs so that no one can download or copy my programs without my permission.
Thanks in Advance
Sachin Gautam

Hi again,
1. In that case we cannot do much.
2. However,
   we can use
   the exit
   SEUED001
(fm is EXIT_SAPLS38E_001)
to restrict the program
in edit mode,display mode
etc etc.
depending upon the PROGRAM NAME.
I hope that serves your purpose.
regards,
amit m.

TS3694 I am using iphone 3gs, I upgraded my i-os to 6.0 from 5.1.1 however I am facing performance issue, along with this all the applications including settings or any other shuts down automatically. Is there any way by which I can use my phone in better

I am using iphone 3gs, I upgraded my i-os to 6.0 from 5.1.1 however I am facing performance issue, along with this all the applications including settings or any other shuts down automatically. Is there any way by which I can use my phone in better way?

No, downgrading from any version of iOS to an earlier version is not supported.

After updating my iphone 5s to 7.1 ... the keyboard is crashing and it takes too long to respond, what is the solution? if there any link from which we can download the original 7.1 firmware for A1533 Version?

After updating my iphone 5s to 7.1 ... the keyboard is crashing and it takes too long to respond, what is the solution? if there any link from which we can download the original 7.1 firmware for A1533 Version?

Restoring the iPhone will reload its firmware.
Plug the iPhone into (the current version of) iTunes on your computer.
Let it sync. Then choose "Restore" from the iPhone's summary page in iTunes.

Because I have imported from a number of different sources into Aperture (3.2) over the years, I now have many duplicates in my library. Is there any way in which these can be identified and lated deleted?

Because I have imported photos from a number of different sources into Aperture (3.2), I now have many unwanted duplicates. Some of these are in the same "file/folder", others are not. Additionally, some of the duplicates may have different file names.
Can anyone advise me if there is a way of identifying such duplicates in Aperture so that I may later delete them? If this cannot be achieved within Aperture 3, does anyone know of a proven second-party app?
Before ending I should mention that I am reasonable competent on a computer but I am not in any way an expert. (So simple answers would be appreciated if this is possible!)
Hopefully yours, Jeremy

Jeremy -- I suggest making a complete separate copy of your Library and any Referenced Masters and keeping it for a year. "Duplicate" is, to humans, relative rather than absolute. My use of Duplicate Annihilator turned up many useful near duplicates, most of which I couldn't quickly distinguish. With a complete copy nearby, you can be slightly aggressive in your pruning, knowing that should you turn up something in ten months that you need (as an example: the full-size color file for a black & white printed shot that you thought was based on a full-size color Master but which is not), you'll have it.
IME, it was much more effective to get rid of things I didn't need, than to figure out which of several possible duplicates of an Image I did need.

I have a perpetual license for CS 6 on windows. I am switching to an iMac. Is there any means by which I can change the license and obtain Mac compatible CS6?

Can a perpetually licensed CS6 for windows be exchanged for a perpetually licensed CS6 for Mac?

yes, Order product | Platform, language swap

Is there any way in Finder I can get the window to show the amount of free space on a selected drive?

I am not a fan of all the changes they have made to finder in Lion.

Sorry, I didn't know this was so old when I replied. I hope it was helpful anyway.
Go to desktop, click on hard drive, command+I or File ... Get Info.
Then you will see the info for that drive and listing the available space.

I changed my passcode on my IPhone 5 and have forgotten it. I'm not able to connect to itunes to factory reset it so, is there any other way in which i can factory reset it?

i have forgot my passcpde and i'm not able to use a laptop which means i can't connect to itunes so i was wondering if there is any other way in which i can factory reset my phone manually.

Follow the directions here to force your phone into recovery mode & restore it:
http://support.apple.com/kb/ht1212
This will remove the passcode.

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because in the listed applications which can be added below it is not listed. Thanks!

If you're a paying Creative Cloud member, you may not see Lightroom in the Creative Cloud if your computer doesn't meet the minimum system requirements. Check to make sure that your system meets the minimum requirements for the latest release of Lightroom.
If you're using a trial version of Creative Cloud, the Lightroom trial is not available through Creative Cloud. It is, however, available as a stand-alone trial. See Install Lightroom trial | Creative Cloud membership.
Please refer to : Lightroom and Creative Cloud FAQ
Regards
Rajshree

Is there any report which I can see the clearing items seperately

Dear Experts,
Is there any standard report which I can see manual clearing postings with chargoff amount.
Normally this is posting with document type-AB. There are other documents with AB as reversal documents,
settlements and other expenses. So we cannot differentiate by document type.
Is there any other way to develop this report?
Regards
Shanu

Dear Shanu,
Goto to Layout there is field called Doc Status.
In the status if it is A - Clearing Document and B means Reset Clearing Document.
Sorry i was wrong it will not give you the required format.
We have to look some other way
Edited by: lolu jo on Apr 12, 2011 11:12 PM

Is there any default calendar which I can use on my form and report

Hi All,
Is there any default calendar which I can use on date field on my form and report.
just by change its property like double click on date field and property calendar = yes
or any other way.
thanks
mohan

hi
create a functions something like this.i hope it helps u.
function call_calender ( f_dtm_set in date default sysdate ) return date is
l_dtm date;
l_list paramlist := get_parameter_list ( 'CALL_CALENDER' );
begin
if
not id_null ( l_list )
then
destroy_parameter_list ( l_list );
end if;
if
trunc ( f_dtm_set ) != trunc ( sysdate ) --> if you call the calendar function with a date, the calendar will change to that date
then
l_list := create_parameter_list ( 'CALL_CALENDER' );
add_parameter ( l_list, 'DTM_SET', text_parameter, to_char ( f_dtm_set, 'dd/mm/yyyy' ) );
end if;
copy ( null, 'global.calender_date' ); --> create a null global
call_form ( 'form_name', no_hide, no_replace, no_query_only, l_list );
if
not id_null ( l_list )
then
destroy_parameter_list ( l_list );
end if;
if
name_in ( 'global.calender_date' ) is not null --> if the global is not null, give the choosen item back
then
l_dtm := to_date ( name_in ( 'global.calender_date' ), 'dd/mm/yyyy' );
end if;
erase ( 'global.calender_date' );
return ( l_dtm );
end;sarah

I've synced my phone, accidentally, to my wife's account and now lost all me photos and data... Is there any way of retrieving it all? The bigger problem is I can remember when my phone was last synced to my account so the info list is not on there either

I've synced my phone, accidentally, to my wife's account and now lost all me photos and data... Is there any way of retrieving it all? The bigger problem is I can remember when my phone was last synced to my account so the info list is not on there either

To see if there are any backups of your device on the computer, go to iTunes/Edit/Preferences/Devices.
Moving the mouse over the listed backups will tell you to which device they belong.
If there is no backup of your phone listed, your data is gone.
In case you also used iCloud to back up your data, check this article:
iOS: Back up and restore your iOS device with iCloud or iTunes

Is there any transaction in which we can get history of Moving AveragePrice

Hi ,
Is there transaction throuch which we can see the history of Moving Average price . ... Or any other way is there for the same can any body suggest me for the same ....
Thanks in Advance
Regards
Shankar

Dear,
Enter MR22 t-code.
Click on Display document button.
Due to this system display you document number and document year.
Then press F4 on document number field and enter material and plant selection and other values as per your requirement.
You can see list of material price changes for material or list of materials.
Regards,
Mahesh WAgh

Istheir any way by which i can MODIFY the Primary Set of Books option inSOB

Similar Messages

Maybe you are looking for