IStopMotion 2 does not like Quicktime Pro 7.4.5

Boinx would like me to downgrade to 7.4.1 in order for their software to work.
I bought the ISM2 from apple.com along with the QTP upgrade.
I was losing my mind trying to figure out why, all of a sudden, my video feed what chopped up. I emailed Boinx Friday, and got a reply today, and they are blaming Quicktime 7.4.5
However, now I don't even see iStopMotion2 available for sale on apple.com. I was hoping there would be some patch or something.
Anyone having this issue?
Yes, I uninstalled, reinstalled, refreshed licenses, etc. etc.

Downgrade to 7.4.1. Afterwards iStopMotion will work again. You can downgrade using Pacifist (http://www.charlessoft.com/).

Similar Messages

  • My Itunes does not play quicktime

    I have the latest Itunes software version 10.6.3 but when I go to podcasts and try to play video, it tells me that my version does not support quicktime. Help! I have tried updating it but it does not seem to work.

    Try relaunching iTunes in 32-bit mode first, as per the instructions in the following document:
    iTunes for Mac: Older media files may require iTunes to reopen in 32-bit mode

  • Just upgraded to iTunes 10.6 and now it says it does not support Quicktime

    Just upgraded to iTunes 10.6 and now it says it does not support Quicktime.  Not much more to add.  It's a MacPro running Lion.

    warren.b.paul wrote:
    So, I have managed to fix the problem.
    I found that the upgrade had replaced my library files with empty ones.
    So I restored the backup I made of them before the upgrade and
    now all my media is back.
    Great..
    For those who run across this therad and haven't taken the effort to make a backup here is another approach that should work.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • I have ripped cds on to windows and i am trying to transfer them over to itunes except it does not like wma files is there anything i can do

    i have ripped cds on to windows media player but i am trying to transfer them over to itunes except it does not like wma files is there anything i can do

    It should work... when I got my first iPod I transferred my entire library over and it was all .wma files. What specific steps have you tried?

  • Windows 7 does not like my Audigy Card at all

    Hey guys,
    Got too excited and went out and bought Windows 7 Ultimate x64 - fantastic. Problem is, I have no sound - my Asus Rampage Formula motherboard has no onboard sound as it comes with a seperate sound card which won't work and neither will the cheapy Audigy standard one I bought today to try...
    7 automatically installs some drivers when it detects I have a sound card installed and sticks it in the Device Manager under 'System Devices' and calls it a 'High Definition Audio Controller'
    Now I found the new Win 7 drivers on here and downloaded in the hope of installing and overwriting this 'Hi Def Audio Controller' but when i'm in setup I get the error message "Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this Setup Program. Setup will exit" which is completely baffling me as Win7 can detect and install this 'audio controller' - when I hover over the volume icon in the taskbar (which incidentally has a red cross over it) it says 'No audio output is installed"
    I'm probably going wrong somewhere, but I don't know if its Win7 or these "Windows 7" drivers don't actually work?
    Please can anyone help?!!

    Re: Windows 7 does not like my Audigy Card at all^ Perhaps you can try this:
    <a rel="nofollow" href="http://support.creative.com/downloads/download.aspx?nDownloadId=0960"]http://support.creative.com/downloads/download.aspx?nDownloadId=0960[/url]
    Yes I know that that is a standard driver from Creative. But try to download the driver. Then right click it, and extract it. You can extract it like this if you have WINRAR, WINACE, or WINZIP on your system. Even the free 7-zip will work great.
    Then go to device manager, and then to your unknown device, and then update driver, and then choose "have disk....." and browse to the folder where you unzipped the driver. Then install the driver, allowing it to copy the files over to your system. Reboot. Sound may still not be working at this point. Then try windows update or the Daniel K. pack again. Using this method may seem weird but I am trying to "trick" your system into picking up your Audigy.
    This worked for me before with my x-fi Titanim and my Extreme gamer when I switched to Vista 64.

  • Latest version of itunes does not support quicktime?  Cant play a tv show I bought last night from itunes store.

    Latest version on itunes does not support Quicktime......can't play TV show my wife bought last night on iTunes.  Help

    "This movie requires QuickTime, which is not supported by this version of iTunes."  http://support.apple.com/kb/TS3771

  • Latest version of itunes does not support Quicktime can not play movie from library

    Latest version of Itunes does not support Quicktime.  I can not play movies out of my itunes.  Please fix

    I don't usually download video from the iTunes store. I had a couple of long plane rides coming up and thought I might have time to watch the Stanford IOS7 programming class. On the plane I discovered this issue which has gone unaddressed since 2011 and has been worsened in Mavericks. in 2011 the advice was to open iTunes' get info pane and click run in 32 bit. That worked at least for some people. In Mavericks, iTunes will not launch in 32 bit.
    For the files you can locate in the finder ( mine are at
    /Users/raine001/Music/iTunes/iTunes\ Media/iTunes\ U/Developing\ iOS\ 7\ Apps\ for\ iPhone\ and\ iPad/1.\ Class\ Logistics\,\ Overview\ of\ iOS\,\ MVC\,\ Objective-C.mp4
    ) you can click on the file in the finder and it will launch in QuickTime. For some reason on the plane I could see the first lecture in the iTunes view but, although I could see all the other lectures in the finder, I could not see the first one.
    Ah well, maybe some other year I'll think about getting up to speed on ios7. Heck, maybe by then they will design a decent user experience.

  • Epson projector does not recognize mac pro.

    Epson projector does not recognize mac pro. I have a new  mac and it only shown the epson when I check mirror on monitors preferences. The former mac use to be recognized as soon as it was plugged. The epson projector works well connected to a tv receiver.
    Any help, please?

    Please checj if your epson compatible with your mac pro or not. or you can let me know your Epson Model no., so i can check that for you!!!

  • Bitcoin-QT does not like UTC

    Hey Archers! This is my first post on here, but I've been using Arch on and off since 2011... just goes to show how good the wiki is lol
    Anyway, I'm dual booting Windows 8 (work reasons, unfortunatley) and Arch, so as the wiki suggested, I set both operating systems to use UTC. I originally thought it worked like a charm, but after firing up my Bitcoin wallet (in Arch) I soon discovered it isn't syncing with the network in UTC. If I switch back to America/New_York, everything still works great again. How would I make the bitcoin-qt client work with UTC?
    Here is what I did to set UTC:
    ln -sf /usr/share/zoneinfo/UTC /etc/localtime
    And then I tried reindexing the blocks like so:
    bitcoin-qt -reindex
    But I haven't had any luck

    That's odd, we must be reading different wiki pages then, on both the Installation Guide and Time wiki pages, it says the timezone can be set by making a symlink at /etc/localtime that points to the desired zone. Regardless, I checked the hardware clock, and it seems to be set correctly...
    timedatectl status | grep local
    outputs
    RTC in local TZ: no
    And this
    hwclock
    outputs
    Fri 11 Oct 2013 04:41:05 AM UTC -0.797325 seconds
    So it is definately set in UTC at the correct time. I'm thinking Bitcoin-QT does not like UTC for some reason. The time itself seems to be fine because Windows and Arch both have the same time after either windows or Arch syncs time over the internet.
    Thanks for the help cfr, much appreciated.

  • PCI-GPIB does not like returning from computer power-save mode. I need to restart the application. Uggh! Customer not happy.

    It seems volatile memory is lost on the PCI GPIB Card. When the system returns from power-save, I cannot get to my GPIB instruments. I have to close the application and restart it. I've tried unregistering and reregistering the gpib globals and resetting the device interfaces (reissuing the ibdev command) without luck. I am using Visual Basic 6, but I also get the Measurement and Automation Explorer to fail in the same way, so I don't think it is my development environment.

    On Sat, 15 May 2004 20:23:58 -0500 (CDT), SQP Products wrote:
    >PCI-GPIB does not like returning from computer power-save mode. I
    >need to restart the application. Uggh! Customer not happy.
    >
    >It seems volatile memory is lost on the PCI GPIB Card. When the
    >system returns from power-save, I cannot get to my GPIB instruments.
    >I have to close the application and restart it. I've tried
    >unregistering and reregistering the gpib globals and resetting the
    >device interfaces (reissuing the ibdev command) without luck. I am
    >using Visual Basic 6, but I also get the Measurement and Automation
    >Explorer to fail in the same way, so I don't think it is my
    >development environment.
    Can you change your power save settings? What operating system
    are you running?
    Also, some BIOS's have options for power save. For example, recent
    IBM's can be set to maintain power to all peripherals, or only to main
    memory. Of course, you would want it to maintain power.
    I suspect the GPIB board and its driver are completely unable to
    handle power save operation. It probably was never considered while
    it was being designed.
    Aidan Grey

  • MY WIRELESS ROUTER DOES NOT LIKE WINDOWS 7

    OK FIRST I'M NOT YELLING. CAPS ARE MUCH EASIER FOR ME TO SEE AS I HAVE MS. ANYWAY I AM A NOVICE USUER WHEN IT COMES TO ROUTERS BUT MY ROUTER  Wireless-N Broadband Router (WRT300N) DOES NOT LIKE MY NETBOOK WHICH HAS WINDOWS 7 HOME PREMIUM. DOES ANYONE KNOW HOW I CAN EASILY FIX THIS.
    THANKS IN ADVANCE,

    Are you able to see the wireless network name on your computer ?
    If yes, then what's the error message are you getting while connecting to the network ?

  • Admin_client.jar does not like -deploymentPlan switch

    I 'm trying to deploy an app via admin client using the following command line:
    java -jar $ORACLE_HOME/j2ee/home/admin_client.jar deployer:oc4j:opmn://$2.llnl.gov:6003/OpticsLoop oc4jadmin -deploy -file app.war -deploymentName $app -deploymentPlan plan.dat
    It does not like the -deploymentPlan switch. Error is:
    Admin command usage error: Unknown -deploy switch: plan.dat
    It will deploy other apps that don't use the -deploymentPlan. With this app I need the plan so I can disable apache commons logging library that conflicts with the log4j packaged with my app.
    JDK5 and Oc4J 10.1.3.3. Problem seen on Windows as well as on Linux.

    hi vamsee
    I was able to deploy an application, using the "-deploymentPlan" switch, like this:
    D:\oracle\oc4j_101330>java -jar j2ee/home/admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin welcome -deploy -file d:\temp\DPThread638837App.ear
    -deploymentName DPThread638837App -deploymentPlan d:\temp\DPThread638837App-localhost-plan.datIf I change the path for the deployment plan to something that does not exist, I get the message "... Unable to find deployment plan ..." :
    D:\oracle\oc4j_101330>java -jar j2ee/home/admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin welcome -deploy -file d:\temp\DPThread638837App.ear
    -deploymentName DPThread638837App -deploymentPlan d:\temp\unknown.dat
    Deploy error: Deploy error: Unable to find deployment plan d:\temp\unknown.dat.I don't know why it doesn't work for you.
    success
    Jan Vervecken

  • JBuilder does not like Canvas3D

    The JBuilder Enterprise GUI Swing design does not like JBuilder it seems.
    If I take my Canvas3D out everything works fine, I can edit the GUI and such...
    If I use Canvas3D inside my main Frame the Designer closes JBuilder. No message or anything, just totally exits out.
    Anyone suggestions?

    Canvas3D is not swing component. So do not use it in Swing GUI Designer.

  • Itunes does not like my address

    Itune does not like my mailing address

    Well this is normal. First you have to remove your email from being a recovery ID.

  • My Fascinate does not like Android 2.2 Froyo

    Ok, just got the Android 2.2 Froyo update today. My Fascinate does not like it. Nothing works the way it used to, and the "pretty" they put on it does not make up for the pain in the **bleep** it has become. Try to delete single or multiple image and it locks up, takes forever to open some apps. Media scanner will start and will not stop. Shutting down and restarting does not help. Is there any was to go back to the old software that works? Thanks for any help or info. DLS

    darklightusn wrote:
    Ok, just got the Android 2.2 Froyo update today. My Fascinate does not like it. Nothing works the way it used to, and the "pretty" they put on it does not make up for the pain in the **bleep** it has become. Try to delete single or multiple image and it locks up, takes forever to open some apps. Media scanner will start and will not stop. Shutting down and restarting does not help. Is there any was to go back to the old software that works? Thanks for any help or info. DLS
    I first would try a factory reset and then still unhappy with the results, you have a couple of choices, ask for a replacement or revert to version 2.1, and yes, you can revert but only if you go to Android Central Fascinate forums

Maybe you are looking for