IStore Catalog update migration utility?

Hello,
We are using Oracle iStore 11i with E-Business Suite 11.5.10.2. Oracle Content Management is not installed.
Is there a way to migrate/copy iStore catalog insertions or updates from one instance to another (i.e. dev, test, prod)? Any FNDLOAD or XDOLoader-like utility to do it?
Thanks in advance.
Thanks,
Mun

Any idea? Thanks.

Similar Messages

Timeout waiting for catalog update on ReplicatedCache

Has anyone seen this error before or have an idea what might have caused it?
The logs do not show any communication issues happening in the cluster at the time of this error.
Caused by: java.lang.IllegalStateException: Timeout waiting for catalog update
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ReplicatedCache.ensureCache(ReplicatedCache.CDB:84)
at com.tangosol.coherence.component.util.safeService.SafeCacheService.ensureCache$Router(SafeCacheService.CDB:1)
at com.tangosol.coherence.component.util.safeService.SafeCacheService.ensureCache(SafeCacheService.CDB:46)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:843)
at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:1045)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:290)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:745)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:722)
Thanks,
Steve

I am seeing same exception on service start-up. Can some one please provide any pointers/Suggestions?
Oracle Coherence GE 3.5/459 <Info> (thread=main, member=8): Waiting for catalog update: 7
Oracle Coherence GE 3.5/459 <Info> (thread=main, member=8): Waiting for catalog update: 7
Oracle Coherence GE 3.5/459 <Info> (thread=main, member=8): Waiting for catalog update: 7
Oracle Coherence GE 3.5/459 <Info> (thread=main, member=8): Waiting for catalog update: 7
Oracle Coherence GE 3.5/459 <Info> (thread=main, member=8): Waiting for catalog update: 7
java.lang.IllegalStateException: Timeout waiting for catalog update
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ReplicatedCache.ensureCache(ReplicatedCache.CDB:84)
at com.tangosol.coherence.component.util.safeService.SafeCacheService.ensureCache$Router(SafeCacheService.CDB:1)
at com.tangosol.coherence.component.util.safeService.SafeCacheService.ensureCache(SafeCacheService.CDB:46)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:717)
at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:919)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:283)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:686)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:664)
thanks,

ACS 5.3 Migration Utility Failures

I'm trying to run the migration utility to export from ACS 4.2.0(124) to an ACS 5.3 appliance, and am receiving the "
Fatal Error !! - cannot connect to ACS 4.x DB !!" error when I run the utility on the migration machine. The migration machine has ACS 4.2.0(124) installed and is a Windows 2008 Standard Server SP1 running as a VM. I am logging into the server with VNC (*not* RDP) with a locally-defined administrator account. I get these errors in migration.log when I run the utility and try to do an "analyze and export" function:
07-26-2012 13:36:55 JavaUtils.isAttachmentSupported(JavaUtils.java:1308) WARN - Unable to find required classes (javax.activation.DataHandler and javax.mail.internet.MimeMultipart). Attachment support is disabled.
07-26-2012 13:37:14 ACS4Connector.checkDBConnectivity(ACS4Connector.java:137)FATAL - Fatal Error !! - cannot connect to ACS 4.x DB !!
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
at ianywhere.ml.jdbcodbc.IDriver.makeODBCConnection(Native Method)
at ianywhere.ml.jdbcodbc.IDriver.connect(IDriver.java:354)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at com.cisco.nm.acs.mgmt.migration.ACS4Connector.getConnecter(ACS4Connector.java:66)
at com.cisco.nm.acs.mgmt.migration.ACS4Connector.checkDBConnectivity(ACS4Connector.java:133)
at com.cisco.nm.acs.mgmt.migration.MigrationApplicationCLI.runExport(MigrationApplicationCLI.java:605)
at com.cisco.nm.acs.mgmt.migration.MigrationApplicationCLI.main(MigrationApplicationCLI.java:266)
Any ideas?

Hi there,
The migration utility doesn't work when running Windows 2008 or 64-bits machines. This is already documented:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtn17779
Let me know if it helps.

I used the migrator utility to transfer music and picture from my old PC and now I have 2 accounts on my new Mac, how can I get back to one account and still have the music and photos transfered ?

I used the migrator utility to transfer itunes and photos from my old PC to my new Mac and ended up with 2 accounts on my new computer. How do I transfer the music and photos and only have the 1 account on the new Mac ?

That's not easy. The Windows migration tool makes a new user account, and you can't prevent it.
You may be able to transfer what you want manually, but it's not quick or easy. See Transferring files from one User Account to another.

9.3.1 Migration Utility gives "Project does not exists" error in log

In preparation for using Hyperion Reporting and Analysis 9.3.1, I have installed the following on a Linux test server:
--Oracle App Server 10.1.3
--Oracle Database 10g XE
--Hyperion shared services 9.3.1
--Hyperion UI Services 9.3.1
--Hyperion SQR Production Reporting 9.3.1
--Hyperion Reporting and Analysis, Financial Reporting 9.3.1
Everything is up and running and I created a new user account in Shared Services to administer the system, and attempted to give it full access by provisioning it with all the available roles. I received an error message stating
"+OracleJSP: An error occurred. Consult your application/system administrator for support. Programmers should consider setting the init-param debug_mode to "true" to see the complete exception message.+"
I'm investigating that now, but the roles seemed to be assigned to the user anyway.
When attempting to migrate from HPSu 8.5.2 to Reporting and Analysis 9.3.1 using the 9.3.1 Linux x86 Migration Utility (V11333-01 from edelivery.oracle.com), I get the following error message in a test migration:
The migration process has been failed on 'User Defined Roles' migration step*
I set the log level to debug and looked it over and here are the error details:
+\[09 16 10:49:29,080] \[ERROR ] The migration process has been failed on 'User Defined Roles' migration step+
+\[09 16 10:49:29,081] \[ERROR ] com.hyperion.interop.lib.OperationFailedException: Project does not exists by this id '%201252935352214.11'.+
com.hyperion.pmt.migrator.common.CommonException
at com.hyperion.pmt.migrator.userprovision.tool.MigrationManagerImpl.doAssignDefaultGroup(MigrationManagerImpl.java:864)
at com.hyperion.pmt.migrator.userprovision.tool.MigrationManagerImpl.startMigration(MigrationManagerImpl.java:751)
at com.hyperion.pmt.migrator.userprovision.ui.panels.MigrationPanel$ProcessRunner.run(MigrationPanel.java:304)
Caused by: com.hyperion.interop.lib.OperationFailedException: Project does not exists by this id '%201252935352214.11'.
at com.hyperion.interop.lib.helper.AdminProjectHelper.getProjectNameByID(Unknown Source)
at com.hyperion.interop.lib.CMSClient.getProjectNameByID(Unknown Source)
at com.hyperion.pmt.migrator.userprovision.tool.MigrationManagerImpl.getDefaultGroupBundle(MigrationManagerImpl.java:824)
at com.hyperion.pmt.migrator.userprovision.tool.MigrationManagerImpl.doAssignDefaultGroup(MigrationManagerImpl.java:861)
+... 2 more+
We've only one user-defined role in the source system that I don't think is giving us this issue, it is inactivated and "User Roles" was not one of the selected objects to migrate.
I would like to try taking the role completely out of the source system if possible, preferably through SQL applied to the V8 tables or through the SDK.
The error looks like it lies in the migration task following the user role provisioning, doAssignDefaultGroup* and is caused by getProjectNameByID*
The steps I have taken (for sanity sake) so far are:
--I've removed all associations with this user defined role in the source system (users, groups, and roles) using the administrative interface on the web.
--I've unchecked 'User Defined Roles' on the list objects to migrate from the source to target systems in the Migration Utility, but I still get the error.
It looks like it is trying to provision a user defined role in the target system, but it is not finding a default project by the id in the error message.
Are there any Shared Services steps in the target system that need to be taken besides creating a manager type user to use as a log in for the Migration Tool?

I turned on the jsp debug init-param for the system for more information about the error. I get the following:
Request URI:/interop/jsp/css/CSSTemplate.jsp
Exception:
OracleJSP:oracle.jsp.parse.JspParseException: /jsp/css/provisionSummary.jsp: Line # 119, <bean:define id="appId" name="appName" property="key"/>
Error: Tag attempted to define a bean which already exists: appId
When I attempt to provision the user I created for administrative purposes, Ialso see the following:
--from the file SharedServices_Metadata.log I see the error:
+2009-09-18 15:55:32,399 \[AJPRequestHandler-HTTPThreadGroup-6\] ERROR com.hyperion.eie.common.cms.CMSFacade - org.apache.slide.structure.ObjectNotFoundException: No object found at /users/admin+
--from SharedServices_Admin.log
+2009-09-17 14:49:20,583 \[Thread-13\] ERROR com.hyperion.cas.server.CASAppRegistrationHandler.loadApplicationsFromCMS(CASAppRegistrationHandler.java:430) - AuthorizationException occured when loading applications : Refer log in debug mode for details+
How does one set these logs into debug mode ?

Qosmio X500 Folder migration utility and low disk space drice C

This may be a longish post as I try to explain my problem... please forgive.
I've had my X500 for just over three months now.
It took a little while before the folder migration utility woke up I didn't know it was there after I'd done a limited copy of folders across from my old Qosmio F20. After it had woken up and I'd been able to transfer folders/files across it cleared a lot of room from the 'tiny' - I feel, 60 Gb SSD C drive.
I keep getting a message coming up sometimes, when I boot up, that the folder migration utility has a setting for me. If I open the utility it shows no folders in the 'C' drive area and folders already transfered [from first using it] in the right hand side for the 'D' drive. Text in the bottom of the utility says something like "if you have done some manual transfers then it can't do anything"... something along those lines - sorry for not being clear on that.
I've recently installed some other programs and have endeavoured each time to do a custom install to the D drive to program files [x86] folder. However, drive C is now showing low disk space at 5.58 of 59.2 Gb.
Checking the folders copies??? I thought for the programs I installed I find lots of folders/files in those program folders so taking up a lot of space.
What is the best way to free up space on drive 'C' please?
Should I manually copy the data contained in the folders [not just a 'name' ... ie; AVID... folder but possibly also in the drive C Program files [x86] folder] to the same named folders on drive D?
If I did, would the programs work properly or would there be problems in the program being located?
When the utility first activated [by itself] I thought "Great... transfer of all my old data to the X500 will be easy" but it doesn't seem to be the case. I was expecting that any new programs installed would be automatically copied to drive D. I'm getting somewhat paranoid about the low disk space on drive C.
Help would be appreciated.

Thanks for coming forward PauPau.
Firstly, when I got the x500 I had lots of documents etc., I wanted to transfer over so I used the Win7 Transfer program to make the back up/transfer images. In doing the transfer across [after the copies of] the X500 gave an error warning that the C: drive had insufficient space to do the full copies. At this time/stage I was not aware that the X500 had a folder migration utility. What ever made it 'wake up' and make itself known I have no idea but I used it when it did. My first problem was probably in using the Win7 file transfer - for getting files/folders across from the old computer to the x500!
I ended up doing a factory reset about three times before this utility made it self known. I found NOTHING in ant documentation about the X500 about this utility and how to make use of it when I bought the laptop. Not sure if you are aware of the make up of the X500 having 2 hard drives; a 'C:' drive of 65Gb SSD and a SATA 'D:' drive of 650GB. If you do then my apologies if that comes over in any 'bad' way. The D: drive is NOT a partition of 1 installed hard drive as your reply would seem to suggest you are thinking.
The migration folder utility, when used first time, copied/transfered folders across - even program folders such as Program files [x86] - and left 'similar' named folders on the C: drive. At that time I then thought that any future installs of programs would be put in the D: drive. Only when watching the first time for a new program install did I see it going to the C: Program and Program files [x86] folders instead of those in the D: drive. I then had to uninstall and do a custom install to direct to the D: drive. However... some data appears that it can NOT be directed from the install disk to the D: drive and still goes to the C: drive - HENCE the issue I am having with the small amount of remaining free space on the C: drive.
I accept what you say in reply to my question about the best way to free up space but, based on as explained above, should I have to do a re-install of any program I try to run after being moved to the same named corresponding folder on the separate D: drive [if that is what I have to do] I think the install disk will still do an automatic install of these to the C: drive as at that stage there seems no way of stopping it. Although given the option in a custom install to change the 'drive' to install to such as the D: some data is still going to C: and I'll be in the same predicament that I am now.
If that's the case then maybe this is something that TOSHIBA should be looking in to solving if they are going to produce laptops with two hard drives - - - even if one [the C: drive] is of the SSD make to speed thing up.
I DO appreciate your input. MAybe I didn't explain properly first time... and maybe I haven't this time - in which case I apologies.
Are there no other X500 users with the same issue?
Thanks. I may just have to give it a go and transfer these data files/folders manually to the D: and see what happens if no one here can guide as to stop any hair pulling frustrations if it goes wrong.

Can't update migration assistant to transfer data to new mac

Just bought a new MacBook Pro and want to use Migration Assistant to transfer data from my Macbook OS X 10.4.11 The new MacBook Pro says i need to update Migration Assistant on the source computer, but when i run software update on the source computer it says there is nothing that needs updating. Any ideas on how to get this done?

Right, there is no update for 10.4.11, only 110.5.8 & up.
If the old MacBook has Firewire you can put it in FireWire target disk mode...
http://support.apple.com/kb/HT1661
So you only need MA on the newer one.
If no FW on the old one you'll need to clobe the old one to an externak drive tahat can be moved to the new one.
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/

User migration Utility

Hello will there be a user migration utility in Windows 10? If so I would like to test it. Will the User State Migration Tool work in windows 10?

Hi Morgan Ecklund,
Microsoft has released the Windows Assessment and Deployment Kit (Windows ADK) for Windows 10 Technical Preview, we could download from the link below:
http://www.microsoft.com/en-us/download/details.aspx?id=45522
For the components, see:
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

[solved] xfce4-terminal spam after update to util-linux 2.25-3

I use the setterm command inside a file in /etc/profile.d so that I can prevent the screen from blanking when using a console, along with a couple of other things.
After the latest update to util-linux (2.25-3), whenever I open xfce4-terminal these lines show up:
setterm: terminal xterm does not support --blength
setterm: terminal xterm does not support --bfreq
setterm: terminal xterm does not support --blank
[gilmoreja@JamesPC ~]$
Is there a better way to handle making sure setterm runs when a console is used, but not necessarily when a terminal is opened? Or is there some other way to solve this issue? There doesn't seem to be a switch for setterm for any kind of "quiet mode."
Last edited by gilmoreja (2014-08-06 18:36:28)

I think that the shell started in a console is a login shell, and it is not the case in a graphical terminal.
A login shell has a '-' at the start of $0; so you can test that and condition the execution of the setterm commands:
if [[ $0 == '-bash' ]]; then
setterm ...
setterm ...
fi

Migration from Stellent v7.g to UCM 11g - Configuration Migration Utility

Hello,
I am in the process of planning a migration from the old Stellent 7.5 system to the new Oracle UCM 11g.
I keep hearing of a utility called "Configuration Migration Utility" to setup the 11g system with the same users, folders, metadata, etc... as the older Stellent system. Does anybody know where to find this utility? Is there a single tool that will "export" the configuration from my Stellent and import that configuration onto my 11g?
Please let me know.
Thanks!
JDM

Hi
CMU tool is a way to create the entire configuration bundle from 1 instance to the other .
This is a component that will be available from patchset 13526049 which is for CS 7.5
You will need to put this patchset on the 7.5 server and then from the option list select CMU which will then install the component on server .
For ucm 11g it is already installed on the server but disabled by default .
Thanks
Srinath

How to update capacity util. level & Work hours in IT -8

Dear Concern,
There is a problem in updating capacity util. level & Work hours in IT -8 in the T -Code -PA30. It is still showing Capacity 0% & Work Hours -0 hr monthly. We have already updated the same as 100% & 208 hr. monthly in Info Type-7 , inspite of then, the same has not been automatically updated in Infotype 8..
Please advice how can we update Capacity Utilisation & Working hours in the Infotype 8 as we have already updated it in the Infotype 7.
Thx

You cannot show a specific timespan, e.g., 8AM to 5PM, and hide the remaining hours. However, you can highlight the working hours of the day by implementing getWorkingStartTime and getWorkingEndTime on the Resource.
You can specify the workingTimeColor attribute (optional, there is a default) on Gantt to set the working time color.

OATM Migration utility fails LONG column

Execute Migration Commands
Migration processes for tables with LONG and LONG RAW columns don't start in the background.
No log is generated.
In FNDTSMIG.log I found "sh: syntax error at line 1: `(' unexpected "
Any ideas ?

Hi,
See if this doc is helpful
Running OATM Migration Utility Fails With "sh: syntax error at line 1: `(' unexpected " [ID 552302.1]
Regards
Yoonas

Error while running tablespace migration utility.

Hi,
Am migrating from 11.5.9 to 11.5.10.2
while running the OATM utility $FND_TOP/bin/fndtsmig.pl it prompts for the connecting string and as soon as I give my database name(i.e connecting string) it is exiting with error as
Unable to get the host of the database from <SID>
And am trying to run it with the user as applmgr. Where am I wrong.....??
Thanks in advance,
Patel

Duplicate thread ..
Error while running tablespace migration utility.

Msconfig.exe- startup: disable Adobe CS Serv Mgr and Adobe Updater Startup Utility

Can I safely untag
Adobe CS6 Service Manager
and
Adobe Updater Startup Utility
in the Startup panel under Windows 7 -> MSConfig.exe ??
I am trying to figure out why my pc freezes.
Everything is okay, no eventlog errors, temperatures, drivers, whatever ...
I already disabled startup things and now want to do this for Adobe as well.
Thanks

Thanks
Also disabled AcroTray - will see what happens.
Have no idea what is used for.
=
=

Catalog update failed,IFR_ERROR=250,DESCRIPTION=POS(1) Duplicate secondary

I tried to a restore of database from one host to another host. During this process, I am getting Catalog Update failed, Duplicate secondary key: INDEX0.
2011-07-11 17:50:01 6169     53070 SAVPOINT B20PREPARE_SVP: 59
2011-07-11 17:50:01 6169     20008 Pager    SVP(3) Start Write Data
2011-07-11 17:50:02 6169     20009 Pager    SVP(3) Stop Data IO, Pages: 2 IO: 2
2011-07-11 17:50:02 6169     20010 Pager    SVP(3) Start Write Converter
2011-07-11 17:50:02 6169     20011 Pager    SVP(3) Stop Converter IO, Pages: 2 IO: 2
2011-07-11 17:50:02 6169     53071 SAVPOINT B20SVP_COMPLETED: 59
2011-07-11 17:50:02 6940     20039 Admin    Kernel state: 'REDO LOG' finished
2011-07-11 17:50:02 6940     54000 OBJECT   /sapdbQ/SCB/db/lib/lib64/liboms
2011-07-11 17:50:02 6940 ERR     5 Catalog Catalog update failed,IFR_ERROR=250,DESCRIPTION=POS(1) Duplicate secondary key:INDEX0
01
2011-07-11 17:50:02 6940         3 Admin    Database state: OFFLINE
2011-07-11 17:50:02 6940     11560 COMMUNIC Releasing T47
2011-07-11 17:50:02 6940     12696 DBSTATE Change DbState to 'SHUTDOWN'(25)
+++++++++++++++++++++++++++++++++++++++ Kernel Exit ++++++++++++++++++++++++++++
2011-07-11 17:50:03     0     12845 DBSTATE Kernel exited normal
2011-07-11 17:50:03     0     12808 DBSTATE Flushing knltrace pages
2011-07-11 17:50:03     0     11560 COMMUNIC Releasing T15
2011-07-11 17:50:03     0     12696 DBSTATE Change DbState to 'OFFLINE '(29)
--------------------------------------- current write position -----------------
How to resolve this?
Thanks and Regards,
Giridhara

I tried to drop and re-create GKD database as well. But the same error repeats.
Edited by: Giridhara Tadikonda on Jul 12, 2011 4:16 AM

IStore Catalog update migration utility?

Similar Messages

Maybe you are looking for