IStore Profile Option: IBE:Recalculate Price in OM
Hi there,
Has anyone set up the value of profile option IBE:Recalculate Price in OM to null? Currently we have it set at yes so every time an order gets into OM from iStore it should recalculae price in OM. We are afraid that setting it to NULL might cause some pricing issue. We are on 11.5.10.
thanks.
techie.
"Has anyone set up the value of profile option IBE:Recalculate Price in OM to null? Currently we have it set at yes so every time an order gets into OM from iStore it should recalculae price in OM. We are afraid that setting it to NULL might cause some pricing issue. We are on 11.5.10."
This will indeed cause some pricing issues. It might be that a incorrect price is calculated in the iStore (or an old price is still in a saved cart). If you set the profile option to null you might run into those error's. My opinion is that you have to have it set to yes to be sure.
Regards,
Johan Louwers.
Similar Messages
-
The sql of ASO_ATP_SHIP_TO_SITE_ID (while implementing check availability functionality in istore)shows error because of which no value could be set for it.Is there any workaround for this problem?
Regds,
Nithya"Has anyone set up the value of profile option IBE:Recalculate Price in OM to null? Currently we have it set at yes so every time an order gets into OM from iStore it should recalculae price in OM. We are afraid that setting it to NULL might cause some pricing issue. We are on 11.5.10."
This will indeed cause some pricing issues. It might be that a incorrect price is calculated in the iStore (or an old price is still in a saved cart). If you set the profile option to null you might run into those error's. My opinion is that you have to have it set to yes to be sure.
Regards,
Johan Louwers. -
IBE: Attachment Document Category -- Profile Option -- Update ???
We are doing a Proof of Concept for iStore Attachments and I need to update the "IBE: Attachment Document Category". The field is protected against update when attempting from System Administrator responsibility. Is there a certain responsibility/account required when modifying this profile option ??
Thanks in Advancehsawwan wrote:
Hi,
Mark the Visible column at the Site level, and you should be able to mark the Updatable column then (at the same level). If you want to have this profile option updatable at the <A class=bodylinkwhite href="http://www.software-to-convert.com/avchd-conversion-software/avchd-to-iphone-software.html"><FONT face=tahoma,verdana,sans-serif color=#000 size=1>Application</FONT></A> level, just tick the box.
Regards,
HusseinCould you explain it more clearly? I'm a beginner. -
Profile option update at responsibility level from backend
Hi,
I referred few online and oracle support document to update the profile option from backend. I was able to change the profile option at site level, but when I am trying to update the profile at responsibility ( or any level such as user etc), I am unable to do so. Though the script says that profile option has been updated, it doesn't show up when I check on frontend.
EBS 11.5.10.2
DB 11.2.0.1
The script which I use to change profile at site level is this:-
DECLARE
stat boolean;
BEGIN
dbms_output.disable;
dbms_output.enable(100000);
stat := FND_PROFILE.SAVE('SITENAME', 'ABDVLP', 'SITE');
IF stat THEN
dbms_output.put_line( 'Stat = TRUE - profile updated' );
ELSE
dbms_output.put_line( 'Stat = FALSE - profile NOT updated' );
END IF;
commit;
END;
I tweaked the above script to include the responsibility level change, but its not changing. Both the below scripts are not making any changes.
SCRIPT - 1
DECLARE
stat boolean;
BEGIN
dbms_output.disable;
dbms_output.enable(100000);
stat := FND_PROFILE.SAVE('ICX_DISCOVERER_LAUNCHER', 'http://nalinoes01.abd.ad.acco.com:8003/discwb4/html/discolaunch.htm?Connect=[APPS_SECURE]', 'RESP',51889,671);
IF stat THEN
dbms_output.put_line( 'Stat = TRUE - profile updated' );
ELSE
dbms_output.put_line( 'Stat = FALSE - profile NOT updated' );
END IF;
commit;
END;
Note: I found the responsibility id from the below query
SELECT responsibility_id ,application_id
FROM fnd_responsibility_tl
WHERE responsibility_name = 'DIRECT CA IBE CUSTOMER';
===============================================================================
SCRIPT-2
DECLARE
stat BOOLEAN;
resp_id NUMBER;
appl_id NUMBER;
resp_appl_id NUMBER;
BEGIN
DBMS_OUTPUT.DISABLE;
DBMS_OUTPUT.ENABLE (100000);
-- Set the Profile Option value at responsibility level
SELECT responsibility_id, application_id
INTO resp_id, resp_appl_id
FROM fnd_responsibility_tl
WHERE responsibility_name = 'DIRECT CA IBE CUSTOMER';
stat :=
fnd_profile.SAVE
(x_name => 'ICX_DISCOVERER_LAUNCHER', -- Profile name you are setting
x_value => 'http://nalinoes01.abd.ad.acco.com:8003/discwb4/html/discolaunch.htm?Connect=[APPS_SECURE]', -- Profile value you are setting
x_level_name => 'RESP', -- Level that you're setting at: 'SITE','APPL','RESP','USER', etc.
x_level_value => resp_id, -- Default NULL Level value that you are setting at, e.g. user id for 'USER' level. X_LEVEL_VALUE is not used at site level.
x_level_value_app_id => resp_appl_id, -- Default NULL. Used for 'RESP' and 'SERVRESP' level; Resp Application_Id.
x_level_value2 => NULL -- 2nd Level value that you are setting at. This is for the 'SERVRESP' hierarchy.
IF stat
THEN
DBMS_OUTPUT.put_line ('Stat = TRUE - profile updated');
ELSE
DBMS_OUTPUT.put_line ('Stat = FALSE - profile NOT updated');
END IF;
COMMIT;
END;I tried to change at SERV level and still the profile never gets updated. Kindly help.
-
OWB Data Quality & Data Profiling option basic or enterprise license?
Hello,
know anyone if the Data Quality & Data Profiling options is already include in the basic license of oracle warehouse builder or not?
I look forward for your replies :)
Edited by: BartSimpson81 on 11.04.2012 07:38Hi
The last I heard was that Oracle does not offer any license (it is not on the price list) that covers OWB Data Quality and Profiling and it is not covered in enterprise ETL. This OWB Data Quality and Profiling option was axed from the price list a couple of years ago - strange I know. Customers who already have at least one license can get more, but for new customers the only path is the ODI-related Oracle Enterprise Data Quality. I think when it comes down to it if you use it, think its of value then I'm sure someone will happily take some dollars from you at some point.
Cheers
David -
Not able to get the profile option value
Hi,
Not able to get the profile option value after i changed the new value in the application.
I am using fnd_global.apps_initialize to initialize the apps from PLSQL code to get the updated profile option value. But fnd_profile.value is not getting fetched the updated value. Still it is fetching the old one. I mean it is stored in database cache. Please any one let me know how to get the new value every time after i changed the value.
ThanksWhat is the application release?
Is this a custom or seeded profile option?
Can you confirm that the value got changed from the application (query the profile option and verify the value)?
Can you reproduce the issue if you use an API to update this profile option as per (How to Change Profile Option Value Without Forms? [ID 943710.1])?
Thanks,
Hussein -
To generate xml code in encoding as specified in system profile options
Hi,
i have a customer bug wherein the report page which is generated after a particular process, which is a .xml file, does not open because we have special characters which are not getting encoded properly!..
the probable solution to this would be to encode the .xml file in the encoding format specified in system profile options.
After the content generation the following code is used to generate the tags and the .xml page:
DBMS_XMLGEN.setRowSetTag(l_qryCtx,'INVOICE_SET');
DBMS_XMLGEN.setRowTag(l_qryCtx, 'INVOICE_RECORD');
DBMS_XMLGEN.setBindValue(l_qryCtx,'BATCH_ID', p_batch_id);
DBMS_XMLGEN.setBindValue(l_qryCtx,'SUPPLIER_ID', rec.supplier_id);
DBMS_XMLGEN.setBindValue(l_qryCtx,'SITE_ID', rec.site_id);
l_result_clob :=DBMS_XMLGEN.GETXML(l_qryCtx);
l_result_clob := substr(l_result_clob,instr(l_result_clob,'>')+1);
l_temp_invoice_count := DBMS_XMLGEN.getNumRowsProcessed(l_qryCtx);
l_invoice_count := l_invoice_count + l_temp_invoice_count;
DBMS_XMLGEN.closeContext(l_qryCtx);
clob_to_file(l_result_clob);
here we have a transaction type in portugese like Nota de Crédito
and the issue summary is as follows
It contains some foreign language symbols which are not encoded in UTF-8 format hence IE is showing the error. Even though in mozilla the file is completely opened but the same foreign language symbol is not shown. So the error exists in all the browsers.
can you please suggest how the encoding maybe done so as to avoid the above problem!...
and also how to include the encoding as per mentioned in the system profile options.Hi,
>>>The XSD doesn't have any messages only simple and complex types - I can't seem to relate (via drag and drop) them to a data or message type to generate the required objects.
maybe it has some reference inside to some other types which you did not get?
if so you need to import into IR/ESR all files and put the correct reference (external archives)
this would be the proper way to get the file generated according to the xml schema
Regards,
Michal Krawczyk -
How to track the User who has changed the System Profile Options
HI ,
The system profile options are changed by one User (Ex: XX123).
Here, the user XX123, he is not having any sys admin responsibilities .
He is having only I-proc responsibility attached .
Is there any chance to update the system profile options , through I-proc.Pl post details of OS, database and EBS versions, along with which profile options have been changed.
AFAIK, IProc responsibilities do not have access to change profile options.
HTH
Srini -
Dynamical change read only property of columns based on a profile option
Hi,
We are attempting to change a Oracle iProcurement(ShoppingCartPG) which has certain readonly columns by default.
However, we need to make these columns updateable based on a responsibility level profile option. The code goes something like this.
if readonly_profile_option = "TRUE"
{make columnA property = readonly}
else if readonly_profile_option = "FALSE"
{make columnA property = updateable}
I read the guide about switchers and it seems confusing (to me). So if someone can provide an example with some pseudocode that will be helpful.
Also, can I dynamically add an LOV to column A if readonly is false? Of course the LOV should be disabled if readonly.
Thanks a lotHi,
Thanks for the feedback.
Tapash,
Switchers definitely don't make sense.
Raffy,
Didn't know it was that simple. I always thought that the controller fires--> then the page renders --> then the VO attributes get poulated. Basing my understanding on this flow, I though that the bean properties can only be set in controllers and not in VOs(via SPEL). I'll try it tomorrow.
Aprreciate your comments on the following.
Our requirement is to make an Oracle seeded field(SupplierName in iProcurement) updateable and with an LOV . Oracle has seeded it as ReadOnly.
I have two options.
1. If I change the readonly property in jedeveloper(I cannot access it via personalization) and add SPEL that would be upgrade 'unsafe' customizing - I think.
2. So I thought I'll extend the controller, substitute it and use
messageLOVInputText SupplierNameBean=webbean.findChildRecursive("SupplierName");
if{profle=not_read_only)
{SupplierNameBean.setReadOnly(false)};
else
{SupplierNameBean.setReadOnly(true)};
This is more upgrade safe. I have talked to the iProc development team and they are fine with it. -
Setting profile option values using Java Concurrent Program
Hi,
I have a java concurrent program in which i am trying to update a profile option which is enabled only at site level, but the values are not getting committed once the CP completes.
1. I am using CpContext.getProfileStore().SetProfile(<name>,<value>) to set the value.
2. I am printing CpContext.getProfileStore().getProfile(<name>) in the same run and this works.
3. BUt once the CP completes, the values are gone. Seems we have to issue a commit.
3. So i used CpContext.getJDBCConnection().commit; Even this doesn't commit.
Pls. suggest. Has anyone used these APIs to update profile options?
Thanks,
Suresh.I am not not a java expert, but pl see if MOS Docs 305710.1 (A SAMPLE JAVA CONCURRENT PROGRAM) and 827563.1 (How To Create a Java Concurrent Program?) can help
HTH
Srini -
Applications Start Page Profile Option Causing Issues
Hello Oracle Gurus,
I'm having an issue in a 12.1.3 instance that I think may be related to the "Applications Start Page" profile option.
For testing purposes, we set the profile to a specific Self-Service page at the Site level. We eventually removed the Site level profile and added it at the user level just for specific users, but since the Site-level profile was set, every time we click the Home link in the upper right-hand navigation, we get an "unexpected error." If we attempt to log in as a user that does not have the Applications Start Page profile defined, we also get an unexpected error.
After getting the error using either of the methods listed above, if we then try to navigate back to the login page, the instance throws a 500 Internal Error.
If we close the browser and navigate to the instance again, we're able to log in without any issues with user accounts that have an Applications Start Page profile defined.
Our "Self Service Personal Framework Mode" is set to "Framework Only" at the site level.
Bouncing Apache seems to resolve the issue temporarily, but then it comes back again a few hours later...
We've opened a Service Request, but has anyone else run into this before / have any ideas on how to fix it?
Here are some related Metalink notes from 11.5.10:
729375.1 (About the Applications Start Page profile option)
331814.1 (Error on Personal Home Page when returning to 'Home' link)
Thanks!
AnneThe issue is not specific to a responsibility or application.
Here is the error:
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.7.0 - Production
Unix Domain Socket IPC NT Protocol Adaptor for Linux: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 27-JAN-2011 09:46:02
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 110
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=172.30.31.107)(PORT=1502))
Thu Jan 27 09:53:30 2011
Incremental checkpoint up to RBA [0x42.e3635.0], current log tail at RBA [0x42.e37e1.0]
Thu Jan 27 10:13:31 2011
Incremental checkpoint up to RBA [0x42.e602b.0], current log tail at RBA [0x42.e6146.0]
Thu Jan 27 10:33:33 2011
Incremental checkpoint up to RBA [0x42.e7bc9.0], current log tail at RBA [0x42.e7d51.0]
Thu Jan 27 10:53:35 2011
Incremental checkpoint up to RBA [0x42.e995f.0], current log tail at RBA [0x42.e9ac9.0]
Thu Jan 27 11:13:37 2011
Incremental checkpoint up to RBA [0x42.ec163.0], current log tail at RBA [0x42.ec3f7.0]
Thu Jan 27 11:23:48 2011
Starting background process CJQ0
Thu Jan 27 11:23:48 2011
CJQ0 started with pid=8, OS id=17239
Thu Jan 27 11:33:39 2011
Incremental checkpoint up to RBA [0x42.ee08f.0], current log tail at RBA [0x42.ee216.0]
Thu Jan 27 11:53:41 2011
Incremental checkpoint up to RBA [0x42.efd07.0], current log tail at RBA [0x42.eff13.0]
Thu Jan 27 11:54:02 2011
Stopping background process CJQ0
Thu Jan 27 12:13:43 2011
Incremental checkpoint up to RBA [0x42.f25c0.0], current log tail at RBA [0x42.f2e4b.0]
Thu Jan 27 12:33:45 2011
Incremental checkpoint up to RBA [0x42.f4cae.0], current log tail at RBA [0x42.f4e4b.0]
Thu Jan 27 12:53:47 2011
Incremental checkpoint up to RBA [0x42.f6e8a.0], current log tail at RBA [0x42.f6fb7.0]
Thu Jan 27 13:13:50 2011
Incremental checkpoint up to RBA [0x42.fa3d0.0], current log tail at RBA [0x42.fa845.0]
Thu Jan 27 13:33:52 2011
Incremental checkpoint up to RBA [0x42.fc7d9.0], current log tail at RBA [0x42.fc989.0]
Thu Jan 27 13:53:55 2011
Incremental checkpoint up to RBA [0x42.fed4e.0], current log tail at RBA [0x42.ff12e.0] -
Query or Profile Option to find Current logged in user in oracle apps R12
Query or Profile Option to find Current logged in user in oracle apps R12.
I want to get value of current user who is logged in to that particular session, based on the value of user_id or user_name returned i have to do a Forms Personalization.
Plz help.
Regards,
Sadiya P.Hi Sadiya,
do you have the answer for this? please send it to me because i am also have same requirement. so plz post it here.... -
Hi All,
We have set up a new Operating Unit in Oracle Apps. Now when I am trying to create a new Customer in that Operating Unit, I am receiving following error:
ERROR MESSAGE:-Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
We do have MO: Operating Unit and MO: Default Operating Unit set properly at Responsibility level for the Responsibility through which I am accessing this form.
Your help is appreciated!
Thanks in advance,
SKAYou can refer this thread and check your MO operating unit is set or not https://community.oracle.com/message/3937028 thanks
-
Item Validation Organization is not Appearing in LOV in profile options
Dear All,
Item Validation Organization is not Appearing in LOV of the Profile options.
OE: Item Validation Organization
QP : Item Validation Organization
Regards,
JohnHi,
Enable profile 'FND: Personalization Seeding Mode', clear the cache and check if this solves your problem.
--Sushant -
Issue with profile Options in Inventory
I am trying to work with profile options in Inventory and I have 4 Operating units and 2 Legal Entity and 1 Business Group.
At this point I am not sure as how to attach OU to MO:OU ( as there are 4). Similar concern is for GL Ledger..
Please help....Hi Hanu,
In the select query, u can replace s_lifnr with s_lifnr-low, since when we enter values in selection screen, they get stored in a table structure. hence directly equating it to s_lifnr, will not fetch any records.
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs AND lifnr = s_lifnr-low AND gjahr IN s_gjahr AND budat IN s_budat AND saknr IN s_saknr.
Hope this helps!!!
Prerna
Maybe you are looking for
-
They said they refunded, yet I still haven't got the money on my account?
A while ago (about 2 hours) a man on chat said he had refunded my money, as I bought something I didn't authorise, although I don't have the money on my account, even though he said he had. Please help! :) all the best, and a very happy new year to y
-
Using Discoverer with Oracle Apps
Hi, I have Oracle Apps vision instance on my laptop. I installed Discoverer Administrator and Desktop. But when I connect through Desktop, it only recognizes database users. When I check Application User check box still it did not recognize the Oracl
-
HP Officejet Pro 8600, Windows 7 operating system Having issue setting up ePrint account. Put in my email and created a password, then go to sign in and it says the password is invalid. I click Forgot password link, it asks for my email. I give it
-
What to recompile when switching mysql versions?
I tried using -Rs to remove mysql just so pacman would show what depended on it, but the list I got was rather paltry. For example, I know that qt has a mysql library, but it isn't listed explicity as a dependency. Is there some way to get a little m
-
Imp is not importing zero rows tables
Hi.... I have successfully exported the schema...... But while importing into another DB, it is not importing zero row tables..... Why it is happening like that.....is there any specific reason for that...... Plz help.....urgent.... Thanks in advance