Isu/ccs where to store rfid

I had put this in the isu general category - and then noticed later there was a special thread for rfid - so I thought I would try it here.
We have the industry solution for utility (IS-U or CCS).
We are looking at implementing meters with radio frequency id's (the business people tell me these are sometimes called ERT ID's).
Each register on a single device could have it's own radio frequency id.
The question is - we cannot find a place to store them inside SAP without creating our own custom field. Has anyone done this and where have you stored the id?
Thanks.
Scott Overmeyer
[email protected]

Dear Mehul,
It is not certain that this can be implemeted however the easiest way would be to use customer includes and store the data there. During download (to MDE) also use user exits within the print formular to retrieve the data again and download it along with the meter reading orders.
Regards
Olivia

Similar Messages

ISU-CCS

A local utility company wishes to engage us for their preliminary sizing for ISU-CCS. My understanding is that this requires the sizing of the ERP (user based) as well as IS Utilities given in the same panel below. This is our first time with utiltities and would appreciate any inputs you can give us on the throughput based section listed under Utilties of the quick sizer.

Thanks KP for sending him the Ramp up document link.
Lets categorize the solution into some of the verticals for which you are responsible:
1. Hardware
2. Landscape
3. Volume of the data
4. Size of the company (Customer + employees)
5. Is there some legacy system being used ??(If yes then at least the knowledge of following Business Process:
>> Meter installation
>> Meter reading
>> BIll creation
>> Request processin
Well now coming to the answers of these question based out of the vertical:
1. Hardware : it's directly related to answer of the question 4 and 3
e.g : if company is serving let say 1M customer with more then 5K employees then Not only Front office process + Interaction center but also customer portal to integrate all the requirements is necassary (It also depend upon the way it's being done currently and in what ways company like to go about it !!)
2.Landscape
As said initially in this thread IS-U sits on the top of the R/3, as many of the master data is replicated under the standard R/3 componenet e.g:
Connection Object & Device location = Functional location (PP)
Device category = material (MM)
FI-CA(AR/AP)
So the knowledge of the exact landscap is required:
So let see the type of combination which might be possible:
>> CRM (For industries)<----ERP 2005 (IS-U switch on)
(In this landscape the front end system would be crm and erp would enable all the company specific processes to map on the ERP)
I would suggest this landscape when the company is very well off and large in number of customers.
>> IS-U 4.72 on top of R/3
As per my understanding this is the next level of configuration
(Whn company is already running on R/3, but not so flexi to integrate with other legacy components)
3. Volume of DATA:
>>In sync with the size of the company
>>Would some legacy system based processes be used ??
>> Lot of replication of data is required.
Shaishav : I think when you are aware about the ECC 6.0 then better would be if you go throught the link send by the KP and give some time to yourself to get familier with the Business process of this industry.
"IF i've been given 6 hrs to cut down a tree, i'll spend 4 hrs to sharp my Axe - Newton"
Try to get the case study of the implementation of some of the implementation in the Electricity industry and that too where the market is regulated.
I mostly have worked for Europe based industry so i'm not a good person to be contacted for this
Hope information would be benificial.
Some links :
(ECC 6.0)
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/4dce68eafc11d18a030000e829fbbd/frameset.htm
(IS-U 4.72)
http://help.sap.com/saphelp_utilities472/helpdata/en/c6/4dce68eafc11d18a030000e829fbbd/frameset.htm
Some case studies:
http://www.axonglobal.com/pages/sectors/Utilities/documents/TransformingUtilitiesAxonsGlobalCapability.pdf
http://www.sap.com/industries/utilities/pdf/Misc_BKW_ROI.pdf
Regards,
Amit

I have a file where I store my download music. When I click on "add music" to my ipod my music file opens, but rather than have to drag one song at a time to my ipod, how do I copy the entire file at once to my ipod. - steve

Hi - I have a file where I store my downloaded music. When I plug in my ipod and click on "add music" my file appears. Rather than drag one song at a time, how can I download the entire list at once? - steve

I am not doing it in ITunes, but i did down load the song from ITunes. I loaded the song on to my Nano, but in my menu selections it doesn't show the song or the artist in any search format. However, when i plug in my nano to my PC I see the Nano library on my PC drive listings and that song and artist are there. I can click on the song and it will play in Windows media on my work PC. I did notice that the format for most all the songs in my library on my Nano are MPEG - 4 audio Files.
Thanks for your help, Mel

Where we store in sap r/3

Dear sir we can uploaded old data in sap r/3. by lsmw and bdc. but where we store.
thanks regards
jitendra

Hi,
LSMW - Helps to transfer data from legacy system to SAP either one time or periodically.
Steps -
1. Import data (legacy data in spreadsheet tables and/or sequential files)
2. Convert data (from source format to target format)
3. Import data (into the database of the SAP application)
a. Maintain Structure relations, field mapping and conversion rules.
b. Data from legacy system is read
c. Based on step a, the data gets converted
d. The converted data is imported to R/3 system based onBatch input processing or Direct Input or through IDOC Inbound processing
Regards,
R.Brahmankar

I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly. I have uninstalled/reinstalled evernote but it still doesn't work. Anyone know where evernote stores their files on a Mac/

I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly when I try to transfer it. I have uninstalled/reinstalled evernote and the scan snap softward but it still doesn't work. Anyone know where evernote stores their files on a Mac? Or had this problem.

Are there any dialog boxes popping up behind your Yahoo screen?
I have intermittent problems attaching files in Yahoo mail and this is usually the reason. I'm also using an iMac (10.7.3) and this is likely the problem.
It is generally a Yahoo issue rather than a Mac problem.

Is there any way to access the thumbails-db, where finder stores its icons that are assigned to files?

Is there any way to access the thumbails-db, where finder stores its icons that are assigned to files?
Thats a SQLite-DB? Is it possible to access and export them? I´d like to use that Db to assign thumbs to files on my NAS.
Thx!

Are the thumbnails & icons stored in the .DS_Store-File?
When visible, how can I access the content stored in that file?

SAP ISU/CCS

HI ,
I want to know what is SAP ISU/CCS.
Regards,
nagaraju.

Hi,
ISU is industry specific solutions for utilities.
CCS is customer care & servieces.
Regards,
kusuma.

How/Where to store current page details in ADF?

Hi All,
What is the best way to populate the managedBean while loading the page?
In my application, I have an page fragment which display the user details from Webservice DataControl. I drag and drop the webservice data control in to the pageFragment. This fragment has mapped in the taskFlow and the taskFlow as attached in to main JSPX page as a region. I need to store this user information to any place (ManagedBean / or anyother best place to store) which I can use throughout my application, since I dont want to reexecute the webservice each time to get the same user information. Also I want to collect and store this info while I render the main page, not after any user action.
Please advice how & where to store the information in ADF? Can I create an managedBean? If so how to trigger that class method at page load?
Thanks
kln

Hi,
in this case you configure the managed bean to be in session scope. Then, on the first page, you define a phase listener for the after restore phase (its a tag on the f:view element). This phaselistener references the managed bean using EL (important). It can do so using a method expression in JSF. For example, if the managed bean had a method populateUserInfo then yu could reference #{beanname.populateUserInfo} and execute the method expression using Java. In the managed bean, the method would access the binding layer Using the BindingContext class
http://download.oracle.com/docs/cd/E15051_01/apirefs.1111/e10653/oracle/adf/model/BindingContext.html
Call
BindingContext .getCurrent().getCurrentBindingsEntry() to obtain a handle to the active instance of BindingContainer.
BindingContainer bindings = BindingContext .getCurrent().getCurrentBindingsEntry();
Then on the binding container, you invoke the method to query the Web Service for the user info
//before you can call a method on the ADF binding layer, make sure the ADF binding is created for the method
OperationBinding opws = (OperationBinding) bindings.get("name of the method exposed on WS");
//if you need to pass parameters
opws.getParamsMap().put("argument name",value);
opws.execute();
You can use similar code to access the user information from the method iterator in ADF to populate the managed bean fields. You can then access user information from the managed bean through getter and setter methods
Frank
Ps.: I know the description is a bit rough. I'll see if I can come up with a blog sample to a later time
Edited by: Frank Nimphius on Jan 26, 2010 5:43 PM

Need best practice configuration document for ISU CCS

I am working on ISU CCS project. i need best practice cofiguration document for
Contract management
Collections management
Invoicing
Work Management as it relates to ERP Billing.
Thanks
Priya
priyapandey.sapcrmatgmailcom

Which version are you setting up and what are the requirements? IF you are discussing the use of NIC bonding for high availability beginning in 11.2.0.2 there is a concept of "High Availability IP" of HAIP as discussed in the pre-installation chapters,
http://docs.oracle.com/cd/E11882_01/install.112/e22489/prelinux.htm, section 2.7.1 Network Hardware Requirements.
In essence, using HAIP eliminates the need to use NIC bonding to provide for redundancy.

How do you CHANGE the location (away from Drive C) where Firefox stores temporary files?

I know where Firefox stores temporary files. I want to CHANGE this location away from Drive C to decrease writes to an SSD. Thank you.

Thank you.
This function may be one of the few things that IE does better than Firefox. IE lets you change the temporary file location in Tools - Internet options - Settings. Firefox developers should make this task easier and put the instructions in the Help file where they can be easily found.
Since I use an SSD for Drive C, I have learned that any file(s) that are frequently written to should be moved elsewhere to a conventional HDD.

Where to store DBCP and what to do next?

Dear All,
I would like to use the DBCP(Apache DB pool). I have download (commons-dbcp-1.4-bin.tar.gz) from http://commons.apache.org/dbcp/download_dbcp.cgi. I am using fedora linux and have unzip it too. What should be my next step is where I am stuck because I dont know where to store and how make it applicable for my application? Thank you.

newbie14 wrote:
Dear Masijade,
I dont quite get you. You mean run the command -cp followed by my folder path is it? Then this will be permantently set or I must still go n change somethings inside the .bash profile ? I am not running the java file as project but just as a single java file so any settings for it? Thank you sorry I am very new to all this.Then you should skip DBCP. You should skip JDBC as well. You need to learn the basics of java before you learn JDBC.
And after you learn both of those then you can look at DBCP.

Where to store customized modelsupport2 and reportgen*.seq files

We currently put all customized model and front end sequences under c:\Documents and Settings\...\TestStand 4.1\Models etc. We have since customized modelsupport2.* and reportgen*.seq files found in Program Files\NI\TestStand 4.1\Components\Models\TestStandModels. Question is where to store these customized files. There is an assortment of subfolders under Documents and Settings\All Users\Documents\NI\TestStand 4.1.
Solved!
Go to Solution.

What version of Windows do you have?
The file structure in All Users\Documents\NI\TestStand 4.1 should be similar to that in Program Files\NI\TestStand 4.1. Essentially they are equal. The key is TestStand looks in the All Users Directory first. If it doesn't find it there then it goes into the Program Files one. You can verify this by opening your search directories (Configure>>Search Directories). Look for a item in the list called Public components directory. Look at the path for that. The very next entry should be TestStand components directory. Look at the path for that. They both have Subdirs checked. If you were to switch those around (meaning TestStand components directory before Public components directory) then TestStand would grab the default files and not the ones you modified.
So you should put modelsupport2 in Documents and Settings\All Users\Documents\NI\TestStand 4.1\Components\Models\TestStandModels\modelsupport2.*
reportgen*.seq should go in the same folder.
If those folders don't exist then create them. You can probably get away without creating them and just placing it all in the base dir (Documents and Settings\All Users\Documents\NI\TestStand 4.1) but I recommend structuring it the same so you don't get confused and it has the same look and feel.
Hope this helps!
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Where to store the servlet class files ?

If, I store the class files for servlets under WEB-INF/classes folder,
          i get file not found exception while using WL 6.1 sp2. But, if i store
          the class file under DefaultWebApp folder, it works fine.
          Any help about where to store the class files for servlets would be
          great help.
          Thanks.
          hiren


Copy Servlet in DefaultWebApp/Web-Inf/classes directory.
          Configure Servlet in web.xml deployment descriptor.
          <servlet>
          <servlet-name></servlet-name>
          <servlet-class></servlet-class>
          </servlet>
          <servlet>
          <servlet-name></servlet-name>
          <servlet-class></servlet-class>
          </servlet>
          <servlet-mapping>
          <servlet-name></servlet-name>
          <url-pattern></url-pattern>
          </servlet-mapping>
          hiren dossani wrote:
          > If, I store the class files for servlets under WEB-INF/classes folder,
          > i get file not found exception while using WL 6.1 sp2. But, if i store
          > the class file under DefaultWebApp folder, it works fine.
          > Any help about where to store the class files for servlets would be
          > great help.
          >
          > Thanks.
          >
          > --
          > hiren

Where to store javabeans

Hi,
I am new to jsp and javabeans. I just want to use a java bean in a JSP file. I don't know where to store my javabean file. Could you please help?

javabeans are Java programs and classes. So, in order for your application to run in a browser, the web server container needs to look for those bean classes. Where to look for ? WEB-INF/classes is place that web server will go and look for and execute those classes. But, I think you can reconfigure your web server directories. There are many web servers out there, and they all have different setups. You need to read your server setup docs.
Philip

Where to store bean program ?

Hi... Am trying to create an Application using JspDynPage Component. am using java bean in this. Can any one tell me where to store this javabean program?

Hi
When you create your Portal component and you select JSP DynPage, 2 steps ahead in the wizard, you get the option: Use a Bean for Information Exchange.
Click generate bean statements and enter the name of your bean and the scope.
P.S. If this answer helped you do consider rewarding points.

Isu/ccs where to store rfid

Similar Messages

Maybe you are looking for