ISU contract generation - Master data generator

Hi guys
I 'm working in ISU and i'm new. I need to generate master data in customizing and i have a litle bit problem.
Exist a posibility of exit a function module in this part. When i try in debugging work but i don't know fm interfase, so i can't retry data that i need.
Anyone knows about it?
Best regards.

what all data does the MDG replicate? I guess Middleware will be required to be set up.
Julius

Similar Messages

ISU Business Partner Master data Upload using BAPI?

Hi Experts,
I used BAPI "BAPI_ISUPARTNER_CREATEFROMDATA" to upload ISU Business Partner master data.
This BPAI is not uploading the following topics:
1. Communication Address like Telephone,extension, email and etc., are not uploading.
2. Middle name, nick name etc, the field which are under the Expand symbol not uploading.
3. Reference customer also not uploading.
strctures what I used are:
for communication : TELEFONDATANONADDRESS, E_MAILDATANONADDRESS
general data : BAPIISUBPD
Reference customer: BAPIBPPARA-MUSTER_KUN
I am passing all the data but not uploading some of the field values (above) using that BAPI.
Could you please let me know the solution?
Please help me out!
Thanks in advance.
sekhar

Sekhar:
Try with below details:
for communication : BAPIISUBPA & BAPIISUBPAX.
general data : BAPIISUBPD & BAPIISUBPDX
Reference customer: BAPIISUBPA-BP_EXT & BAPIISUBPDX-BP_EXT
Thanks,
Murali.

Master data generator

Hi Gurus,
In SAP MDT ,I owuld like to know the following
In TA EPDTYPE ,the following is observed.
for a particular MDT category i could see alias,lower cat,cardinality.
Ex :BCONTACT -MDT CAT
      BCONTACT_NOTICE -Alias
     BCONTACT_NOTICE-Lower cat
     0 -cardinality
Kindly epxlian the logic behind this
Thanks
Edited by: CRMBUG on Sep 12, 2011 6:00 AM

what all data does the MDG replicate? I guess Middleware will be required to be set up.
Julius

Unable to generate "Export data source" for Master data infoobject

Hi Gurus,
I'm in BW 3.5
I need to generate "Export data source" for a master data info object.
I followed below steps:
I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource was successful"
Problem:
Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
Could anyone please help ????
Thanks,
Venkat

Hi Venkat,
I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
-Vikram

Lease Out Contract - Master Data Structural Relations

Dear Gurus,
I am new to FX RE and if my question is too simple, please excuse me!
I am researching the possibilities for the master data structure of lease in contracts and have a serious confusion.
The documentation says that objects can be assigned to a contract individually or many objects related to one contract. At the same tim it is said that rental units are assigned only to lease out contracts.
How should i proceed if my company has got many lease in contracts for different object. Is it a must the contract to be assigned to an object or it can be managed just as a contract? I saw that from the RE Navigator you can create a contract, does that mean that in FX RE the contracts itself is considered as master data record?
Any opinions will be highly appreciated.
Many thanks in advance!

Dear Kumar,
Sorry if I ve been confusing. I will try to make it more clear.
I am working for a Teleco and i am researching the possibility of implementing FX - RE internally. We will not need all the functionalities of the module, but only the ones that allow you to manage your lease in contracts. We`ve got lots of base stations contracts (as you can imagine) where our company is a tenant in a lease contract.
I did some research in relation to the master data structure and cant work out how should our master data be structured. The business requirements are - handling the advance payments, accruals and postings, giving and receiving notices, adjustments of rent etc. Is it possible to create the contract within the system, set all the conditions directly in it or do we need to have another master record other that the contract itself.
My confusion comes from the fact that the standard solution of the lease outs suggests creating a rental unit first and then assigning the contract to it. But since we will be tenants we dont need to more detailed information on these objects, we just need the conditions in the contract that will let us handle all the activities that arise in connection to it.
I hope that i put the question more clearly this time.
Can you also tell me if it is possible to create a template and after entering the conditions about the particular contract to generate it from the system on a hard copy?
Many thanks and sorry if i cant make myself more clear!

Technical Master data replication CRM to ISU

Dear Experts,
This is regarding the replication of TECHNICAL MASTER data from CRM to ISU. I have done all the required setting and the data is replicating to ISU as well except PoD.Unable to replicate POd.Can any one suggest on this
Also while creating Service Contract in CRM every time system ask to "identify the Premise " which is not possible as i am unable to find Premise details in CRM.
Has any one faced such issue.
Regards
Hrishi
Moderator note - thread locked, no research, generic question

Hi,
Sometimes, the data can get stuck in the queues. So you need to check on it as well.
After creating the technical master data, please check whether it exist in ISU system.
Then you can check the SMQ1(Outbound queue) in ISU.
Then you can check the SMQ2 (Inbound queue) in CRM.
Also in Tcode SMW01 ( BDoc message) in CRM.

Generating Master Data Export DataSources Error

Hi Guys
I 0VENDOR info object to be exported to other BI system . Iam using Generating Master Data Export DataSources. When I right click on 0vendor and say Generate export data source it shoud create 80VENDORM , 80VENDORT. But when I am doing that its saying generation successfull (what ever the success message)..when I go check the Infosources / Data Soruces / Info Provder and try to search 8zvendorM...I couldnt find this...Also I searched with vendor in all the tabs...Iam only finding 0VENDOR but not the new created once..Can any one tell me where should i check for it...Also ,please note that...Iam also using the same function Generate Export DS for one DSO and I can see this one in the Unassigned nodes of the Info Source TAb......
Please let me know the sol ASAP
regards

Hi PB and Voodi
I tried with Voodi's Sol and am still not able to find the 80VENDORM and 80VENDORT ....Where as PB's...I cant find the generated objects.in the settings tab...Can you please let me know what will be the issue and how to find this Data Sources....
Please let me know ASAP...regards

"Error reading credit master data" in contract management in CRM 7.0

Hi All,
In CRM 2007,whenever we navigate to contract management screen,error message come which is "Error reading credit master data "
Any suggestion on how to solve this issue.
Regrads
Nikhil

Hi All,
This is resolved.
Just set the entry in the table CRMV_CREDIT_GEN to 'Do not Display credit master data '
Regards

Can we generate a report on master data alone without Info cube?

Could some one let me know whether
Can we generate a report on master data alone in BEx without Info cube?
Thanks in advance.

yes you can generate a report .
use the master data infoobject and insert that infoobject as a infoprovider and design a query using this infoprovider and view your query on this master data in Bex Query...
cheers
Sunil

How can we generate a report in master data?

hi,
can we generate a report in master data,if yes pl give me the procedure, i am un able to get it.
thanks & regards
venkat

Hi,
Once we make the MAster infoobject as the data target, then we can create the report on the master data. to make the IO as Data target , you just need to mention the tick mark for Infoprovide check box in the MAster data /Texts tab page of the IO.
help says that:
InfoProvider:
This indicator specifies whether the characteristic is an InfoProvider.
If you want to use a characteristic as an InfoProvider, you have to assign an InfoArea to the characteristic. The system displays the characteristic in the InfoProvider tree in the Data Warehousing Workbench. You can use the characteristic as an InfoProvider in reporting and analysis.
You can only use a characteristic as an InfoProvider if the characteristic contains texts or attributes.
You can define queries for the characteristic (more precisely, for the master data of the characteristic) if you are using a characteristic as an InfoProvider. In this case, on the Attributes tabstrip, you are able to switch-on dual-level navigation attributes (navigation attributes for navigation attributes) for this characteristic in its role as InfoProvider.
With rgds,
Anil kumar Sharma .P
IBM-India.

Error when generating master data routines

Hello all,
I´m trying to activate 0BPARTNER but an error appears: Error when generating master data routines, and no more information is provided.
I´m working with BW 7.0.
Has anybody had this problem?
How could I solve it?
Thanks in advance.
Carmen

Hi Carmen,
I'm working with SAP BW 700 and I had also this error during a characteristic activation in my QA system. This happened when I tried to transport the activated characteristic from my DEV system.
I found also message TK425 when I was trying activation through RSDG_IOBJ_ACTIVATE program.
I solved this error message with OSS note 01458319 700SP24: "Transport fails during the impact analysis of DTP".-
I hope this helps.
Best Regards.
AW

Error when generating master data routines when activating infoobject

Hello Gurus,
I had an issue with one of my info object.
I Created the one Custom InfoObject with Just 5 Char without any masterdata and used that in many cubes. we promoted the objects and cube to test and production systems. just couple of days back we can see the InfoObject went to inactive status even though the version is active(not sure how it happend). This is only happens in our test system and production is working fine. when i try to activate the InfoObject again the test system it gives me an error
Characteristic XXXXX: Error when generating master data routines. Tried to correct in RSD5 etc. Checked in RSRV everything is fine. Tried to re-promote the object from Development system. The transport also failed with the same error even though it is in unconditional mode.
Can you please suggest me what are the options.
i cannot delete the object as it is used in many cubes which is having data.
Appreciate your quick response.
Thanks,
Bhaskara Rao.

If your Prod is working fine, it should work in test too.
Did it ever worked in test after transport?
Is it possible some one tried to change something in test? If yes, you will get error when you will try to re-transport it as new transport can't find the previous structure.
You may try to activate the IO using FM RSDG_IOBJ_ACTIVATE
Edited by: ashok saha on Mar 6, 2008 8:05 PM

Is it possible to create isu technical master data using EMIGALL

Hi exports,
I ma new to emigall ,but i need to upload 1000's of master data as well as technical master data .
kindly any body provide me related isu master data upload documents other wise sugesset me step by step guidelines regarding EMIGALL for upload technical master data ..
kindly send me link if have any EMIGALL screens doc..
Thanks in advance..
Moderator note - thread locked, no research done

Post Author: swalker
CA Forum: General
yangster thanks for the quick reply. I am not really sure about combining reports, so I looked into what you said. I tried to create a shared variable on the field that I need to share but that field is a running total and I get an error when I try to run the report "This field cannot be used becaus eit must be evaluated later." So I am not sure what to do now. Is there a work around for this? Thanks for any help.

"Error reading crrdit master data " error in Contract management(CRM 2007)

Hi All,
In CRM 2007,whenever we navigate to contract management screen,error message come which is "Error reading credit master data "
Any suggestion on how to solve this issue.
Regrads
Nikhil

Hi All,
This is resolved.
Just set the entry in the table CRMV_CREDIT_GEN to 'Do not Display credit master data '
Regards
Ankit

Generate Master data IDOC using report-RPCEMDU0_CALL (Tcode-PC00_m10_OTEM)

Hi All,
Can anyone please explain me the functionality of report RPCEMDU0_CALL (Tcode-PC00_m10_OTEM). This is used to generate master data idocs. Any documentation would be really helpful.
Also is there any way to alter the idoc data before sending. Please let me know.
Thanks in advance.
Regards,
Priti Thakur

Standard Doc[ for this transaction.|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/f6/2318b13cf011d2a62900104b56737d/frameset.htm]
There are few threads in SDN and ittoolbox to discuss about the problems but nothing much!
To alter the format...explore the program. You can use the "Enhancement" part to add your custom logic to add columns to interface internal table. To access the enhancement...go to the program and press the 6th button from left ..the swirl button or press Shift + F4. Then activate enhancements ...to do the necessary coding as required.
Also try the user exit:
Note 1515497 - OT: Selection of a Provider - Customization User Exits
As per this note, there is a contact info of SAP Developer...if the note and the info is helpful and you need help related to that note or that functionality contact them.
Edited by: Amosha on Jun 22, 2011 10:31 AM

ISU contract generation - Master data generator

Similar Messages

Maybe you are looking for