ISU EDM cookbook

Hi,
Where can I find ISU-EDM cookbook ? Does anyone has the link?
Thanks in advance.
w
Moderator note - thread locked - no research.

HI,
What is EDM?
EDM is a special module part of SAP Utilities Industry Solution to manage the energy data of a utility company such as load shapes and standard load profiles. Based on this data we can make Real Time Pricing and Settlement.
What is EDM Repository?
EMD has a Repository where all types of energy and energy-related data can be managed especially measurements in euidistant time interval ( 15 minutes, 30 minutes, 1 hour, 1 day).
What is Real Time Pricing?
Real time pricing is special type of billing based on load shapes. Basically we can bill each time interval (15 mins, 30 mins, 1 hour, etc) with a different price, for example the spot price. This type of billing is used for really big customers which have huge energy consumption.
What is Settlement?.
Settlement in EDM means settlement of energy quantities. All input data required for settlement comes from EDM Repository. For example we can calculate the total load of a grid and send it to a market partner.
EDM module is implemented by all big utility companies to help them achive better energy data management, to forecast the consumption and to settle the energy quantities supplied trought a utility network.
Regards
Sreedhar Reddy

Similar Messages

  • ISU - EDM

    hi,
    what is EDM (Energy Data Management) module ?  pl tell me about it.
    regards.

    HI,
    What is EDM?
    EDM is a special module part of SAP Utilities Industry Solution to manage the energy data of a utility company such as load shapes and standard load profiles. Based on this data we can make Real Time Pricing and Settlement.
    What is EDM Repository?
    EMD has a Repository where all types of energy and energy-related data can be managed especially measurements in euidistant time interval ( 15 minutes, 30 minutes, 1 hour, 1 day).
    What is Real Time Pricing?
    Real time pricing is special type of billing based on load shapes. Basically we can bill each time interval (15 mins, 30 mins, 1 hour, etc) with a different price, for example the spot price. This type of billing is used for really big customers which have huge energy consumption.
    What is Settlement?.
    Settlement in EDM means settlement of energy quantities. All input data required for settlement comes from EDM Repository. For example we can calculate the total load of a grid and send it to a market partner.
    EDM module is implemented by all big utility companies to help them achive better energy data management, to forecast the consumption and to settle the energy quantities supplied trought a utility network.
    Regards
    Sreedhar Reddy

  • ISU-EDM Profile Value Import

    Hi all,
    While importing profile values from MS-Excel file (in transaction "Change profile header") the system is giving error "Error Importing Date, Check import file". I would like to know if any specific date format, different than exported file, is to be used. How do we import the profile values for test purposes i.e. without using BAPI/IDoc?

    Hi,
    If the format in SAP is dd.mm.yyyy, you should also be having format dd.mm.yyyy in your OS. If your OS is Windows, then under Control Panel, you have to make the necessary changes under u201CChange the format of numbers, dates and timesu201D.  This is likely to solve your problem.
    With thanks & regards,
    Vinodh

  • Check digit on POD ID number

    Hello,
    Can you please tell me how i can introduce a specific check digit function on the POD ID number? Is there a specific transaction to assign a function module to the transaction EEDM10?
    Thanks in advance.

    Hi,
    If you don't have a CRM system and therefore the POD ID are created in ISU:
    Go to transaction SMOD (system enhancements), and search for 'EEDM*' components. You will find the list below:
    EEDMFO01  IS-U/EDM: Exit for Determination of Calc. Mode for Form
    EEDMPI01  IS-U EDM Exit Before Update of Profile Values During Im
    EEDMPRF1  ISU EDM: Status Det. in Profile for Longer Interval Len
    EEDMUFA1  Usage Factor: Calculation of Consumption Factor
    EEDMUI01  IS-U-EDM: Generate and Check External Point of Delivery
    EEDMUI02  IS-U-EDM: Generate and Check External Point of Delivery
    EEDMUI03  IS-U-EDM: Generate and Check External Point of Delivery
    EEDMUI04  IS-U-EDM: Generate and Check External Point of Delivery
    One of the Last 4, should have the USER-EXIT that you need for the check on POD ID creation.
    If you have a CRM system and you wish to create the Check on CRM, let me know then I will find a solution for you.
    KR,
    AAL!

  • Report that will be called from CIC0

    can anyone elaborate this statement "report that will be called from CIC0"
    whats the process?

    hi arun
       u can  easily  access them  in  SWO1 tcode
    IS_BUS1006 Business Partner for Drag&Relate Insurance
    ISA_FLMP   Vendor's mail partner for material ordered via rel
    ISA_T024D  MRP controller group (ISA)
    ISPPDOCUM  CA Document for IS-IS/CD
    ISSR2      Customizing
    ISTBILLDOC Telco Billing Document
    ISTFILEHIS Transfer of telephone number disconnection file
    ISU_EQUI   Equipment (+ IS-U Functions)
    ISU_IAC    Internet object
    ISU_PRICE  IS-U: Price
    ISUACCOUNT IS-U: contract account
    ISUACCTCLS IS-U: Account Class
    ISUADDRESS IS-U: Address
    ISUBUSVIEW IS-U: information view
    ISUCONTACT Customer Contact (IS-U)
    ISUCONTRCT Utility contract
    ISUCRM1O   Activity in CRM
    ISUCRMCNCT ISU-CRM Connector
    ISUCRMCNTR ISU-CRM Contract (CRM Order Item)
    ISUDERSUP  IS-U deregulation help
    ISUDEVINFO Device info record
    ISUFFEE    IS-U: franchise contract
    ISUFINDER  IS-U search function (data finder)
    ISUGBCIF   GIS Business Connector Interface
    ISUGRID    Supply Grid
    ISUIDEPROC IS-U: IDE process
    ISUIDESWD  IS-U-IDE Switch Document
    ISUIDETRAN IS-U: IDE transaction
    ISUIDOCLOG Application log IS-U
    ISULOT     IS-U: sample lot
    ISULOYACC  Loyalty account
    ISUNBSERVC Point of delivery service (not billed)
    ISUPARTNER IS-U: business partner
    ISUPOD     Point of Delivery
    ISUPRDOC   IS-U: Parked Document
    ISUPRODLOG Product log IS-U
    ISUPRODUCT Utility product
    ISUPROFILE Profile in Energy Data Management (EDM)
    ISUPROP    Owner allocation
    ISUREDEMP  Redemption Document for Loyalty Account
    ISUSDCONF  SD configuration
    ISUSDORDER IS-U: Sales Order
    ISUSDORPOS IS-U: Sales Document Item
    ISUSDQUOTA IS-U: Customer Quotation
    ISUSECTOR  IS-U: division
    ISUSERPROV ISU Service Provider
    ISUSERVICE Utility service
    ISUSETTL   ISU-EDM: Settlement
    ISUSETTLUN ISU Settlement Unit
    ISUSLDCMNT Document/sub-ledger document
    ISUSMNOTIF IS-U: Service notification
    ISUSMORDER IS-U: Service Order
    ISUSRVPROD IS-U: Service Product
    ISUSUPSCEN Supply Scenario
    ISUSWITCHD IS-U-IDE Switch Document
    ISUSWTELOG Error Log for Switch Document
    ISUTASK    IS-U: Data Exchange Task
    ISUWIMUSER Work item with user interaction
    kr
    raj

  • Replication of BP Relationships --- ISU to CRM

    Hi All -
    We have an ISU ECC 6.0  Ehp 4and CRM 7.0 sp3 system.
    I am trying to set up the replication of Business Partner Relationships.
    I am using the cookbook avbl in Service Marketplace.
    I have a couple of questions.
    1. The cookbook says something about Business Partner Contact Persons (in table KNVK) as not being a part of the replication. When I create a contact person for my ISU Business Partner the relationship (Contact Person BUR001) gets created in the BUT050 table. So, what exactly is the document trying to say about Business Partner Contact Persons (in table KNVK) ?
    So, anyways I did all the configuration.
    a. Checked the internal number ranges that the relationships will use and made sure everything is good.
    b. I added the entries to the COM_BUPA_CALL_FU table in ISU. Deleted the other entries in the table as mentioned.
    c. Added the entries in the CRMC_BUT_CALL_FU CRM tables as mentioned.
    d. I ran into some transport issues here and hence had to delete entries from CRMC_BUT_CALL_FU CRM tables for BP Relation type and reenter them from an excel back up.
    When I try replicating a Contact Personfrom ISU to CRM I can see the relationship data in CRM middlewarein the SMW01 queue with the status being processed. But there is no relationship in CRM. I can't see it. Here are the entires I have in the CRMC_BUT_CALL_FU CRM. Am I missing any entry I should need to make the relationship get created in CRM from ISU?
    BPOUT     BUPR     100000     CRM_BUAG_MAIN_GET_ID_LIST               
    BPOUT     BUPR     1000000     MERGE_BUPA_CENTRAL               
    BPOUT     BUPR     1300000     CRM_BUPA_BDOC_BPR_FILL_DATA               X
    BPOUT     BUPR     1400000     CRMPHA_BR_BDOC_FILL_DATA               
    CRMIN     BUPR     10000     FS_BPREL_DIST_CRITERIA_ROLE               
    CRMIN     BUPR     50000     CRM_BUPA_BDOC_FILTER_REL               X
    CRMIN     BUPR     100000     BUPA_MWX_BDOC_MAP_REL_CENTRAL               X
    CRMIN     BUPR     110000     CRM_ISM_BUPA_UP_CURRSTATE_SET               
    CRMIN     BUPR     200000     CRM_BUPA_BDOC_MAP_REL               X
    CRMIN     BUPR     900000     CRM_BUPR_RESTRICT_CONTACT               
    CRMIN     BUPR     1000000     MERGE_BUPR_CENTRAL               
    CRMIN     BUPR     1100000     CRM_BUPA_INBOUND_REL_MD               
    CRMIN     BUPR     1200000     CRM_BUPA_BDOC_MAP_REL               
    CRMIN     BUPR     1300000     CRMPHA_MWX_BDOC_MAP_REL_PHARMA               
    CRMIN     BUPR     2000000     MERGE_BUPA_FINSERV               
    CRMOU     BUPR     100000     BUPA_MWX_BDOC_BPR_FILL_CENTRAL               X
    CRMOU     BUPR     200000     CRM_BUPA_BDOC_BPR_FILL_DATA               X
    CRMOU     BUPR     1200000     CRM_BUPA_OUTB_BPR_FILL_MD               X
    CRMOU     BUPR     1300000     CRM_BUPA_BDOC_BPR_FILL_DATA               X
    CRMOU     BUPR     1400000     CRMPHA_BR_BDOC_FILL_DATA               
    MERGE     BUPR     1000000     MERGE_BUPR_CENTRAL               
    R3AIN     BUPR     1000000     ABA_BUPR_MAP_PROXY_TO_DDIC               X
    R3AOU     BUPR     2000000     ABA_BUPR_MAP_DDIC_TO_PROXY               X
    Thanks in advance for the help.
    Regards,
    Pradhip.S

    Pradhip:
    I am not sure about that line - but contact persons are replicable with the correct middleware configuration. 
    regards,
    bill.

  • Replication of BP Relationships --- ISU ECC 6.0 to CRM 7.0

    Hi All -
    We have an ISU ECC 6.0 Ehp 4and CRM 7.0 sp3 system.
    I am trying to set up the replication of Business Partner Relationships.
    I am using the cookbook avbl in Service Marketplace.
    I have a couple of questions.
    1. The cookbook says something about Business Partner Contact Persons (in table KNVK) as not being a part of the replication. When I create a contact person for my ISU Business Partner the relationship (Contact Person BUR001) gets created in the BUT050 table. So, what exactly is the document trying to say about Business Partner Contact Persons (in table KNVK) ?
    So, anyways I did all the configuration.
    a. Checked the internal number ranges that the relationships will use and made sure everything is good.
    b. I added the entries to the COM_BUPA_CALL_FU table in ISU. Deleted the other entries in the table as mentioned.
    c. Added the entries in the CRMC_BUT_CALL_FU CRM tables as mentioned.
    d. I ran into some transport issues here and hence had to delete entries from CRMC_BUT_CALL_FU CRM tables for BP Relation type and reenter them from an excel back up.
    When I try replicating a Contact Personfrom ISU to CRM I can see the relationship data in CRM middlewarein the SMW01 queue with the status being processed. But there is no relationship in CRM in the BP screen. I can't see it.
    Here are the entries I have in the CRMC_BUT_CALL_FU CRM. Am I missing any entry I should need to make the relationship get created in CRM from ISU?
    BPOUT BUPR 100000 CRM_BUAG_MAIN_GET_ID_LIST
    BPOUT BUPR 1000000 MERGE_BUPA_CENTRAL
    BPOUT BUPR 1300000 CRM_BUPA_BDOC_BPR_FILL_DATA X
    BPOUT BUPR 1400000 CRMPHA_BR_BDOC_FILL_DATA
    CRMIN BUPR 10000 FS_BPREL_DIST_CRITERIA_ROLE
    CRMIN BUPR 50000 CRM_BUPA_BDOC_FILTER_REL X
    CRMIN BUPR 100000 BUPA_MWX_BDOC_MAP_REL_CENTRAL X
    CRMIN BUPR 110000 CRM_ISM_BUPA_UP_CURRSTATE_SET
    CRMIN BUPR 200000 CRM_BUPA_BDOC_MAP_REL X
    CRMIN BUPR 900000 CRM_BUPR_RESTRICT_CONTACT
    CRMIN BUPR 1000000 MERGE_BUPR_CENTRAL
    CRMIN BUPR 1100000 CRM_BUPA_INBOUND_REL_MD X
    CRMIN BUPR 1200000 CRM_BUPA_BDOC_MAP_REL X
    CRMIN BUPR 1300000 CRMPHA_MWX_BDOC_MAP_REL_PHARMA
    CRMIN BUPR 2000000 MERGE_BUPA_FINSERV
    CRMOU BUPR 100000 BUPA_MWX_BDOC_BPR_FILL_CENTRAL X
    CRMOU BUPR 200000 CRM_BUPA_BDOC_BPR_FILL_DATA X
    CRMOU BUPR 1200000 CRM_BUPA_OUTB_BPR_FILL_MD X
    CRMOU BUPR 1300000 CRM_BUPA_BDOC_BPR_FILL_DATA X
    CRMOU BUPR 1400000 CRMPHA_BR_BDOC_FILL_DATA
    MERGE BUPR 1000000 MERGE_BUPR_CENTRAL
    R3AIN BUPR 1000000 ABA_BUPR_MAP_PROXY_TO_DDIC X
    R3AOU BUPR 2000000 ABA_BUPR_MAP_DDIC_TO_PROXY X
    Thanks in advance for the help.
    Regards,
    Pradhip.S

    Hi,
    go to ERP.
    check there the table CRMRFCPAR
    Is there an entry for OBJ_NAME EQUIPMENT?
    If no create it.
    If yes check this entry if everything looks fine.
    Afterwards start a new initial load.
    Best regards
    Manfred

  • Crm middleware : R/3-ISU to CRM Business agreements and Contract accounts

    Hi Guys
    We are Downloading BP data from R/3 ISU system to CRM system and I did the relevant customizations using setup and load guide, along with the BP data it is required to download <b>Business agreements and contract accounts (BDOC buag_main) also for this download I don't have any idea about what customizations to do</b> to download BUAG_MAIN does any one have the document which specifies the required custmizations for downloading Business partner agreements.
    My id :  [email protected]
    Thanks in advance
    Warm regards
    Rajasekhar

    Hi Madhu,
    Contract Account on ISU is Business Agreement on CRM. Please refer the following path to get the load guide for contract account.
    The SAP Service Marketplace, http://service.sap.com/utilities => Product Information => mySAP CRM for Utilities => Cookbooks & Guidelines => IS-U Specific Set-Up and Load Guide for Business Agreement / Contract Account.
    <b>Reward points if it helps.</b>

  • CRB Integration: CRM-ISU

    Since there seem to be a new post every day for basic setup of ISU integration with CRM, here is one thread which provides links to the documents in the service marketplace and elsewhere.
    Most of these documents are directly available at the Utilities page on the Service Marketplace https://service.sap.com/utilities
    Choose 'SAP for Utilities - Product Information' then 'SAP CRM for Utilities' and lastly click on 'Cookbooks & Guidelines' as shown below
    New 12-15-2013
    CRM for Utilities Overview
    https://service.sap.com/~sapidb/002007974700000213002013E/CRM_Utilities_2013.pdf
    New 03-27-2013
    WebClient UI Style Guidelines - great resource for understnading how to develop user interfaces in ICWC
    http://www.sapdesignguild.org/resources/uiguidelines.asp
    New 06-14-2012
    Best Practices - Setting Up a Best Run Interaction Center with SAP for Utilities
    https://service.sap.com/~sapdownload/011000358700000669512012E/SettingupaBestRunIC.pdf
    New - 05-14-2013
    The Utilities Check Cockpit
    This link only works for internal SAP folks, sorry.  https://service.sap.com/~sapdownload/011000358700001040272011E    
    Here is link for the help for the check cockpit. Utilities Check Cockpit - Functions for the Utilities Industry - SAP Library
    New - 11-14-2011
    Link: [Defining Products and Packages|https://service.sap.com/~sapdownload/011000358700001236052011E/Pakete_Definition_e.pdf]
    Link: [Selling products and packages|https://service.sap.com/~sapdownload/011000358700001235842011E/Pakete_Verkauf_e.pdf]
    Link: [Products and Product Packages|https://service.sap.com/~sapdownload/011000358700001424402010E/Final-Produktpakete_EN.pdf]
    Link: [Error handling with replication of contracts and TMD|https://service.sap.com/~sapdownload/011000358700004455162003E/Errorhandling_IS_U_CRM_e.pdf]
    Link: [Using ISU Master Data Templates|https://service.sap.com/~sapdownload/011000358700000623432005E/Cookbook_MDT_e_140507.pdf]
    Link: [ISU Setup Load Guide for Business Agreements/Contract Accounts|https://service.sap.com/~sapdownload/011000358700001088262009E/SDG_busagrmnt_contrtacc_e.pdf]
    Link: [ISU Setup Load Guide for BP relationships|https://service.sap.com/~sapdownload/011000358700000347572009E/SLG_GP_rel_Partner_roles_e.pdf]
    Link: [ISU specific Business Partner Load Setup|https://service.sap.com/~sapdownload/011000358700001064192007E/SLG_GP_ISU_V2.pdf]
    Link: [ISU-CRM Contract Integration - Contract Management|https://service.sap.com/~sapdownload/011000358700001143442009E/ContrIntegr_021009_e.pdf]
    Link: [ISU-CRM Marketing Integration|https://service.sap.com/~sapdownload/011000358700000503312010E/Cookbook_Marketing_2007_e2.pdf]
    Link: [Master Agreements in Sales Processing for C&I|https://service.sap.com/~sapdownload/011000358700000159352009E/Rahmenvertraege_CRM2007_e.pdf]
    Link: [Quotation Calculation in Sales Processing for C&I|https://service.sap.come/~sapdownload/011000358700000483592009E/Kalkulation_CRM70_Gesamt_e.pdf]
    Link: [Replication of BP Contacts to CRM Activities, Interaction Records|https://service.sap.com/~sapdownload/011000358700000646422009E/Replication_BP_Contacts.pdf]
    Link: [Replication of Technical Objects - Connection Object, Premise, Point of Delivery|https://service.sap.com/~sapdownload/011000358700001988852008E/TechnicalObjets_KW_261108.pdf]
    Link: [Archiving ISU/CRM Objects|https://service.sap.com/~sapdownload/011000358700000732942010E/Utilities_CRM_Archiving.pdf]
    Link: [Utilities Process Framework|https://service.sap.com/~sapdownload/011000358700001113322009E/Utilities_Prozess_FW_en.pdf]
    Link: [Replication of ISU Price data|https://service.sap.com/~sapdownload/011000358700000042352009E/MDG_Preisreplikation_e.pdf]
    Link: [Usage of ISU Consumption Profiles|https://service.sap.com/~sapdownload/011000358700000065322009E/Profile_e_final.pdf]
    Link: [SAP Help - CRM with SAP for Utilities|http://help.sap.com/saphelp_crm700_ehp01/helpdata/en/46/66235fc77c453a8696f76c66e8014c/frameset.htm]
    Link: [Performance of Initial Download from ERP into CRM for ISU|https://service.sap.com/~sapdownload/011000358700000101082010E/Perf_Initial_Download.pdf]

    Hey Bill, thanks for the links.  Question - is the Utilities Check Cockpit available externally?  I try the link but receive an authorization issue using my new S-id
    I am trying the following link:
    https://service.sap.com/~sapdownload/011000358700001040272011E
    Thanks,
    James

  • SAP ISU UCES - Utility Customer E-services

    Hi Folks,
    We are using CRM IC Webclient and UCES for a SAP ISU and CRM implementation for a utility company. I have following queries to start with.
    1. I understand that UCES works on Java/JSP and can work standalone as well as via EP. Please share documentation as to how to get UCES up and running in both scenarios.
    2. There are certain things which can be done via CRM IC Webclient as well e.g Move-in and Move-out. How would this be different from UCES apart from the fact that it is being created by the customer service agent in the former and by the customer in the later.
    3. Is there a cookbook for development/configuration for UCES ? If so please share.
    Thanks ahead,
    Regards,
    Yuvaraj

    Hi,
    Good day experts,
    iam working on variant programming which is EA88 T.CODE. I've created YAVGCONS variant for avg.consumption which is ISU_YAVGCONS But it goes to short dump. thats why i've created another ISU_YAVGCONS1 For ea00 t.code. when iam execute the ea00 t.code which is under Debug mode. New function module is not triggering? Why? and can i delete old one or else anything i hve to do?
    Plz give me solution
    regards,
    kk

  • SAP ISU for Regulated Utility Market

    Dear Experts,
                 Anyone having implementation experience in regulated utility(Electricity) market like India, please help me with some cook books related to CIC and meter installation part. Please give me some information about how to deal with connection management and meter installation in SAP ISU.
    With Warm Regards,
    SAP ISU Consultant

    Hello,
    You can find the cookbooks @
    http://service.sap.com/utilities -> "SAP for Utilities - Product Information" -> "IS-U/CCS" -> "General" -> "Cookbooks&Guidelines"
    Hope this helps
    Rgds
    Rajendra

  • SAP ISU BP Contact - CRM Activity - CRM IC Interaction record

    Hi   All -
    I have a cookbook which talks about migrating SAP ISU BP Contacts into CRM Activity.
    Now, my question is if I do this, will this show up as a interaction record against the customer in the IC WebClient in CRM?
    We are considering a design where billing supervisors will enter a BP Contact in ISU when customers directly call them about a bill.  Later, if this customer calls the Cust Service Rep, we want this interaction to be visible to the CSR who will only use the CRM Webclient.
    So, I guess indirectly my question is,
    "Is a CRM Activity the same as an CRM WebClient Interaction record"?
    or
    "Is a CRM WebClient Interaction record a type of CRM Activity"?
    Thanks in advance for taking your time to answer this.
    Regards,
    Pradhip.S

    Hello Pradhip,
    the CRM IC Interaction Record is technically a CRM Activity with a certain transaction type. You can configure the replication of IS-U Contacts that the created activity is shown in the Interaction Center as Interaction Record. So you will be able to see the IS-U Contacts created in ERP - for example within a Front Office Process - in CRM as replicated Interaction Records.
    Kind regards,
    Christian

  • SAP ISU Settlement Procedure

    Hi all,
    Have anyone worked on SAP ISU Settlement Procedures?
    I would like some basic understanding on:
    1.) Create a custom settlement procedure
    2.) The use of settlement parameters and settlement steps
    3.)  The basic requirements that need to be setup for custom settlement procedure
    Thanks

    A few days back I have hosted an webex workshop on SAP IS-U EDM Settlement.
    You can download it here:
    http://www.sap-isu.net/forum/attachment/download?id=2694047%3AUploadedFile%3A13796
    or here:
    http://www.sap-isu.net/forum/topics/edm-settlement?xg_source=activity&id=2694047%3ATopic%3A13624&page=2#comments
    (scroll to the bottom of the page).
    In order to play the recording you need the Webex Player which can be downloaded here:
    http://www.webex.com/downloadplayer.html
    (choose WRF player).
    Hope it will help you,
    Regards,
    Daniel Toba
    http://www.sap-isu.net - the online community for ISU Consultants

  • SD customer replication from CRM 2007 in ISU

    Hi Experts,
    I am creating a Business partner in CRM 2007 in role sold to party which is getting replicated in ISU system(Entry is saved in table BUT000) also the entry for SD customer gets saved in table KNA1; however system can not retrieve sales area for customer (No entry in table KNVV).
    Sales area has already been maintained for Reference customer and required configuration is also in place.
    Please let me know if anyone has faced similar kind of issue.
    Regards,
    Amit Gupta

    Hello Amit,
    As far as I know the reference customer is used when your business partner is created in ISU only.
    If you create your business partner in CRM you will have to add your sales area manually, or via "mini-templates" for example... but the reference business partner won't be used (check the relevant cookbook: ref BP is used for data transfer from ISU --> CRM but not from CRM --> ISU).
    Kind regards,
    Nicolas.

  • ISU Payment Plan

    Hello,
    Please share the link with  exhaustive documenatioon on SAP standard ISU Payment Plan material . Also would like to know the difference between Payment Scheme and Payment plan for Australian Market.
    Thanks in advance.
    Regards,
    Sunil S

    Hi Sunil,
    The major difference between payment plan and a payment scheme is that a payment plan is related to a finite number of open items to be payed on a e.g. monthly basis until the debt is payed finally. On the other hand, the validity period of a payment scheme is unrestricted.
    Payment plan:
    An agreement between the customer and the utility company, which determines the amount to be paid for each bill on agreed dates. The payment plan amount is not necessarily the bill amount. The difference amount between the bill amount and the payment plan amount is fixed and posted. The payment plan is not to be compared with the budget billing plan that is charged between two periodic bills.
    Payment Scheme:
    The payment scheme is a statistical budget billing procedure. Consumption billing amounts from previous and current billing periods are copied to the payment scheme and distributed evenly over the next billing period. The budget billing amount is determined partially from an extrapolation portion that reflects the expected consumption for the current billing period and partially from the copied consumption billings. It is not necessary to copy consumption billings to the payment scheme in order to use this procedure. If you do copy them, the bills are not paid directly by the customer but during the next billing period when the
    payment scheme requests are paid. The payment scheme allows payments to be made in weekly, fortnightly, monthly, quarterly, and yearly cycles. The validity period of a payment scheme is unrestricted. This means that a payment scheme is not ended and another created when you create a periodic bill. Instead, the existing payment scheme is adjusted.
    There is a cookbook payment scheme available in [http://service.sap.com/utilities] -> SAP for Utilities (product information) -> IS-U/CCS -> Billing&Invoicing -> Cookbooks&Guidelines.
    Kind regards,
    Fritz

Maybe you are looking for