ISU Mass Delete Regional Structure entries
Hello,
We have migrated through Emigall Postal Codes, Cities, Streets but the upload file was wrong.
So, is there a way to mass delete the Postal Regional Structure entries (Postal Codes, Cities, Streets)?
Regards
Roula Alexopoulou
Thank you very much Siva for your quick response.
We are going to have many migration cycles, so each time we are going to create or refresh a client using Customizing client copy from the development client and since regional structure tables are customizing tables all the data are copied to the new client. This is the reason that we need the mass delete functionality.
So, I have to create a program to delete Postal Codes, Cities and Streets there is no standard way?
Regards
Roula
Similar Messages
-
Automatic import mass data regional structure - Program RSADRLSM01
Hello,
regarding the automatic import mass data to the regional structure via
program RSADRLSM02, we are working in order to replace our third party
provider.
That is why, we need to deleted all the data imported from the city
file and the references before to import new provider data.
We have checked the SAP procedure defined in SAP note 132948 and the
mentioned program RSADRLSM01 but we need confirm that the regional estructure informed in the old documents saved in the system could be impacted if the program RSADRLSM01 is executed.
Any experience in this kind of process?
Thanks in advance.
Juan CarlosSince no one has replied - why not just try this in your test system and see what happens?
-
Mass deletion of Service Entry Sheets
Dear all,
Is there any option to revoke the acceptance of multiple service entry sheets and mass deletion.
thanks in advance
urendraDear Mohamed,
I want an option for revoking acceptance and deletion for multiple service entry sheets at a time,
regards,
urendra -
Mass delete incorrect entries in TimeEvent table
Hi All
Please if any body can help out, we have an interface for uploading time entires (time IN and time out) into SAP. By mistake some wrong entries are uploaded in the system, we can delete entries one by one using PA61 list entry. but is there any way of mass deleting these entries for all the relevant employees for infotype 2011 (timeevent table).
Thanks for your help in advance
CHi C,
should you not have authorisation to use &sap_edit,please use debugger and please find the steps below
1. SE11->Data dictionary ->
2. Choose the table entry
3. After choosing the table entry ,enter /h and press enter to start the debugger session(debugger switched on) message will populate in the status bar. after you enter /h and message gets populated, press enter one more time
4.place a breakpoint in end form.to place breakpoint,just double click and red button pops up near the line .to remove just double click or shift+f2
5.now double click on the line which says code=show and it will move to the variable on the right hand side
6.now click on the pencil and icon will change to view
7.now if you want to insert choose INSR or DELE based on what you are trying to do with table entries.i m trying to insert values.
8.now click f8
And you wll be able to do the amendments
http://www.blogger.com/posts.g?blogID=851689076743960139&searchType=ALL&page=1
hope it helps
No Worries
KG
Edited by: SAPenjoy:) on Aug 29, 2010 12:59 PM -
CCS ISU: Regional Structure - REGIONAL STRUC GROUP & TAX JURISDICATION CODE
Hi there
I am working for a Canadian utility company running CCS-ISU running version SAP ERP 6.04 with Enhancement Package 4 on NetWeaver 7.02. We are looking to update the POSTAL REGIONAL STRUCTURE and have some questions concerning the Regional Structure Group (REGIOGROUP) and Tax Jurisdiction (TAXJURCODE) fields.
We are planning on using data provided by Canada Post to update the Postal Regional Structure, unfortunately Canada Post cannot provide the information that is stored in the Tax Jurisdication Code and Regional Structure Group/District Code. The current data we have stored in these fields is outdated and sometimes missing. We would like to update the Postal Regional Structure without these two fields as it would greatly simplify the update and maintenance of the Postal Regional Structure.
Questions:
1. What are the downstream impacts to the CCS-ISU if we do not store the Tax Jurisdiction Code and Regional Structure Group in the Postal Regional Structure?
We know that 3rd party non energy accounts will default the TAXJURCODE and REGIOGROUP from the Regional Structure if the data is available. If it is not, then the data must be manually entered onto the account. For regular accounts, the system will use the TAXJURCODE and REGIOGROUP that flows through from the Service Address. Are there any other downstream processes that rely on the TAXJURCODE and REGIOGROUP being in the Regional Structure tables?
2. Will there be any impacts to Financials?
3. What data have other companies used to populate the Tax Jurisdiction and Regional Structure Group fields and how has this data been obtained?
Thanks kindly
Jeanette Lau
Edited by: Jeanette Lau on Aug 31, 2010 1:38 AM
Edited by: Jeanette Lau on Aug 31, 2010 1:41 AM1. What are the downstream impacts to the CCS-ISU if we do not store the Tax Jurisdiction Code and Regional Structure Group in the Postal Regional Structure?
If you store the data at postal regional structure....these are defaulted at the respective screens connection object,move in screens.
Here u can validate the adress at the time of move in.
if u dont maintain the data at postal regional strucutre.....if these are required fields then u need to enter manually. If tax jurisdiction code activated then u need to enter the TJC.
2. Will there be any impacts to Financials?
Tax Jurisdicton code has an affect if u hve region specific taxation.
3. What data have other companies used to populate the Tax Jurisdiction and Regional Structure Group fields and how has this data been obtained?
check the objects connection object,premise,movein screens, and FPE1 screens. -
Political Regional Structure in BI---Utilities (ISU)
Hi Experts,
Plssssss help me to understand how to load Political Regional Structure Hierarchy in BI. I checked the available datasources but cud not find relevent datasource for the same.
Thanks in advance
Amitthanks Srinivas ,
just by making a node in hierarchy as City and then create a element for it.
regrds
Deepak. -
Regional Structure for UK addresses
I am planning to use the Regional Structure and a City File in both ISU and CRM to validate and facilitate Address order entry.
I am from the US working on my first project in the UK. Can anyone share any experiences with using regional structure on the UK address format. Things like Building Names and dependant localities are strange to me.
Also I plan to load the regional structure from the PAF - Postal Address File. Any observations on mapping would be appreciatedHello,
Political entity in the service territory, for example, province, municipality or city district.
I hope it is better to implement through postal regional structure
Regards,
Narendar Konakanchi
If Helpful ! Reward Points -
Validation in SAP Regional structure
Hi All,
I have a situation here.
If the Postal department of a country sends a record(address) which is either to be added or deleted in the SAP Regional structure,but my client(ISU company) wants somebody from his team to review or validate that address record before it is updated in the Regional structure.
This is because they think that they might be a year or so ahead from the Postal department in terms of addresses and might either have that record already present in the system or do not want to delete it as it might impact their assets on that address.
Could anyone tell me what all validations can be done corresponding to that record and what is the procedure for the same.We are only updating the Postal Codes,Streets and the Cities through the SAP standard report RSADRLSM02.
Remember that the person reviewing or validating the address will not have much knowledge of SAP,so he would expect some user friendly approach to do this.
Kindly suggest some feasible approach for the same.
Regards,
Puneet Jhari.Puneet
I have a question related to address validation / verification. We want to understand the extent of checks SAP offers by using RSADRLSM02.
We have been suggested by some to go with external software for address checks as opposed to using SAP regional structures.
We are looking for some feedback from customers who have used SAP regional structures before we proceed one way or the other.
Would you mind sharing your experience or point me to a contact ?
Thanks
Sudhakar -
Abap Code to Delete the Duplicate Entries in Datasource
hI Friends I have a code that I am writing to delete the duplicate entries from CRM Custom Datasource but it is throwing me error that INVERNO The specified type has no structure and therefore no component called INVERNO Should i define the structure please correct my code below so that it will work to delete the duplicate entries
Please help
Data: l_s_ZOXD530051 like ZOXD530051. ***Extract Structure of Data source
Case i_DATASOURCE.
when 'ZZ_DS_CUSTOM_CRM_VALUES'.
Sort C_T_DATA by INVERNO ZMKT_TYP.
*write this Statement.
DELETE ADJACENT DUPLICATES FROM C_T_DATA COMPARING INVERNO ZMKT_TYP.
endcase.
Thanks
Soniya
nullHi
It means there's no field called INVERNO:
Data: l_s_ZOXD530051 like ZOXD530051. ***Extract Structure of Data source
Case i_DATASOURCE.
when 'ZZ_DS_CUSTOM_CRM_VALUES'.
<b>*Sort C_T_DATA by INVERNO ZMKT_TYP. <------</b>
Sort C_T_DATA by INTRENO ZINS_TYP.
*write this Statement.
DELETE ADJACENT DUPLICATES FROM C_T_DATA COMPARING INTRENO ZINS_TYP.
endcase.
Max -
Mass Deletion Of Purchase Requisitions Without Using LSMW
Hi,
We would like to delete huge volume of PR generated through MRP. Deleting PR will be a frequent activity in our business scenario. Since the person responsible for MRP is not very much conversant with LSMW, we want to avoid using LSMW.
I tried with MEMASSQR. But 'deletion indicator' field is not available in the field list.
Is there any method through which I can carry out mass deletion of PR?Hi,
I've tryed this from Manish Kumar Agarwal :
Go to SM30 enter the table MASSFLDLST
then create the new entry object type = BUS2105
Table name = EBAN Field:- "EBAKZ" (Purchase requisition closed)
Then run MEMASSRQ and select this field and then PRs after tnat on next page you will get option like film:- carry out mass changes go ahead with it.
But strangelly, it doesnt appear in the memassrq... any idea? -
Dear Gurus,
I want executing mass deletion of the vendor using XK99 for Vendor (3000) and puchasing organization. for which i hve seleted
tables: vendor master records purchasing organization data
fields: del flag. porg (Lfm) = LFM1-LOEVM, but upon selection and save, system is giving error.
Field LFM1-LOEVM. is not an input field
Message no. 00347
Diagnosis
A transaction is processed using batch input.
System Response
The runtime error field xxx occurs (invalid entries)
Procedure
Correct the batch input data. Depending on the processing scenario, this can affect either of the following objects:
Batch input session
CATT procedure
Application program
Kindly help
REgards,
Prashanth PaiHi all,
This thread says its answered. But, the solution is not given. I request the threads starter to kindly put up the solution as I am facing the same problem.
I don't have this problem in Quality or Development, but only in Production. Also there is no version change in the program of the MASS transaction in any of the three systems.
Also, will the thread starter post what error message he got on running xk06 for the concerned vendor and purchasing organization?
Thanks! -
Mass Deletion of Condition Records
Hi
I have created tax condn. records for various combination of plant regions and customer regoins. Can you pls. tell me how can I delete all of them without going to VK12 for each separately? Is there any mass deletion facility. LSMW does not work here since it is not defaulting the region fields.
Thanksanswered
Solution - the values would be replaced once i upload new values th. LSMW
Thanks -
Delete the Service entry sheet open item
Dear All,
How to delete the open srevice entry sheet and how to get the open value of the open service entry sheet .
Please give step by step along with the where the values will save .
TAHNKS AND REGARDS
'KISHORE EDAGALIHi,
Your further inquiry confused us.... Are you looking for the solution of deletion of SE service line items? or PO line items? If you are looking for mass deletion of SE line items, then you will have to develop the customized program which bases upon the standard program (for ML84 transaction).
Cheers,
HT -
Mass deletion of users business partner and position in SRM 4.0
Hi Experts,
We have a requirement of deleting 1000 + users who are locked in ECC from SRM Organization structure. For which I got the list of users who are under u201Cdeleteu201D group from table USR02. Then I found the business partner number of those users from table BUT000. Once I got the BP number I can do mass deletion of the BPs by using BUPA_DEL.
Now, my problem is I need to mass delete the position of the users as well. If I delete it one user at a time I can go to PPOMA_BBP and select the position and delete the object. Can anyone please help me on how can I do mass deletion of the positions of those users, its pretty urgent. I am waiting for your valuable suggestions.
Thanks
Div
Edited by: Tridib Das on Sep 29, 2011 4:15 PMHi Velu,
To find the business partner or the central person id we can' go to table HRP1001 and get the central person id / business partner by inputing the parameters in the selection field as :
Object type : CP / BP
Rel. Obj.type: US
ID rel. object : Give the id of the user
this shows the object id . Anyway thanks for your help .
Cheers
Div -
Failure: Exchange regional Text from ECC to CRM (regional structure)
Hi all,
we exchange the Employee from ECC (HR) to CRM and we have very often failure because of the potal code text in CRM is different and therefore it will not be exchanged and stayes in the queue.
(The function module is called: HRALXSYNC - the job is called ZS_ZN_120_T:HRALXSYNC = is a copy of the original job ...)
A colleague told me there is a regional structure which must be set up identical in both systems. I do not no were I need to search for this settings for the correct postal code text - regional exchange ?
Do you have any ideas?
Best regards, AnnDear Denis,
thank you for your replay
The challenge is that we have a list of 100 employees which could not be assigend because the system check against the regional structure wich is activated by country and it seems not unique (HR -CRM). That means simply in SAP HR the name of the place called Schlieren bei Köniz and SAP CRM the Name of the place called Schlieren b. Köniz, therefore the record will not be exepted, this is the list of failure in CRM:
#5517#5Ort Schliern in country CH not exist
#5517#5Ort Rohr AG in country CH not exist
#5517#5Ort Muri b.Bern in country CH not exist
... so on ...
I have checked the entry in the table T005 -> SPRO: Set country-specific checks
and for country CH is field "City file active" set in both systems (HR and CRM)
- > but maybe, this is the problem? Do you have any ideas?
Regards, Ann
Maybe you are looking for
-
Abysmal Customer Care from BT - Will Now Take My ...
In common with others on these boards, I am sorry to say that my recent experience of BT has been so poor that I will now be taking my business elsewhere. It would take all evening to explain the various ins and outs of my problems, but suffice to sa
-
My 27" iMac (2009) won't boot OSX from the internal drive
Here's a fun problem. After installing Sophos anti-virus and starting a (VERY slow) full scan, a day or two later I found my iMac frozen at the screensaver. It was completely unresponsive so I did a hard reboot, at which point it got as far as starti
-
Unable to export to mobile.me album.
Good afternoon. First, sorry to my bad english. I try to export an album on my gallery mobile.me but it is not possible Aperture say "the request to the server listening" and Aperture crashes and I must force quit. and it is OK with iPhoto. How to ge
-
Adobe AIR keeps trying to download a WIN32 module to my 64-bit OS
Adobe AIR keeps trying to download a WIN32 module to my 64-bit OS. There's no s/w in the Adobe product list to read a FAQ or get help. 1) What is Adobe AIR? 2) Why do I need/want it? 3) Why is Adobe always trying to load it onto my system? 4) Why is
-
Can't Get iPhone to appear in iTunes - how do I find what USB v. I have
iMac G5 1.8 ghz OS 10.4.10 iTunes 7.3