ISU_S_WORKLIST_INSTALL - Interval Meter Replacement scenario

I have used Function module 'ISU_S_WORKLIST_INSTALL' to replace old device with a new device.
I have passed all the register meter readings for all the registers in old and
new device, alongwith other parameters accordingly to the Function module
and it replaced the old device with the new one correctly.
I tried to use the same function module 'ISU_S_WORKLIST_INSTALL' to replace installed interval meter
with a new interval meter. I passed the meter readings for both old and new meter.but it is giving error.
"You cannot make an entry in field No MR"
"Specify a device that is installed"
When I tried to run the function module 'ISU_S_WORKLIST_INSTALL' in dialog mode,
I see that meter readings for both old and new meter is not populated and If I give the
readings on screen itself , it replaced the old meter with the new meter in the installation correctly.
Can anybody help to understand what to do so that function module passes meter reading values
( that I am pasing to function module) for old and new interval meter at run time and it replace the old device with the new one.
Edited by: Rohit Kumar on Apr 16, 2010 8:56 PM
Edited by: Rohit Kumar on Apr 16, 2010 11:58 PM

I tried this. It is working fine for Normal meter.
But in my case, the meter is an interval meter so in this case, on eg30 screen( device replacement ) , always the first register is coming grayed-out (No entry is possible).
So,even when I am passing the Meter Reading in auto-auto_zw accordingly to function module 'ISU_S_WORKLIST_INSTALL', it is giving me error -
"You cannot make an entry in field No MR".
I don't know what to change in auto-auto_zw so that all the meter reading got correctly populated into old and new device meter reading fields and device get replaced.

Similar Messages

De-allocating EDM Profile of an Interval Meter attached to an installation

My dear friends, I need sincere help from you .
This is an ISU requirement on which ABAP/functional suggestions are required.
I have an installation with an interval device installed to it.
We need to do full removal of this installed device by eg32.
The interval meter is having EDM Profile attached to it. Before doing full removal of the device from the installation using EG32,
we need to de-allocate the EDM Profile attached to this interval meter. Manually this is done by using transaction code - EEDM04
but we need to do deallocation of profile using ABAP code.
We need your help in this regard. Could you suggest ISU function modules that could be used to do the deallocation of the EDM profile from the interval Device/Meter.
Your help is really needed and appreciated!
Thanks,
Rohit

I think function module ISU_S_PROFASS_CHANGE might be useful.
Isnt't it an option to prorate the profile allocation on device removal?
You can set system parameter PRORATEPRO for this in customizing of device management:
PRORATEPRO (Limit Prof. Alloc. for Rem./Repl./Mod./Chnge to Logical
Reg.)
During device installation/replacement/removal or when changing the
logical register number, you can use this parameter to control
whether the allocations of the profile to the register are limited.
Edited by: evolderen on Apr 15, 2010 8:23 AM

Remove EDM Profile from Interval Meter of an installation-Device Management

My dear friends, I need sincere help from you .
I have an installation with an interval device installed to it.
We need to do full removal of this installed device by eg32.
The interval meter is having EDM Profile attached to it. Before doing full removal of the device from the installation using EG32,
we need to de-allocate the EDM Profile attached to this interval meter. Manually this is done by using transaction code - EEDM04
but we need to do deallocation of profile using ABAP code.
We need your help in this regard. Could you suggest ISU function modules that could be used to do the deallocation of the EDM profile from the interval Device/Meter.
Your help is really needed and appreciated!
Thanks,

I think function module ISU_S_PROFASS_CHANGE might be useful.
Isnt't it an option to prorate the profile allocation on device removal?
You can set system parameter PRORATEPRO for this in customizing of device management:
PRORATEPRO (Limit Prof. Alloc. for Rem./Repl./Mod./Chnge to Logical
Reg.)
During device installation/replacement/removal or when changing the
logical register number, you can use this parameter to control
whether the allocations of the profile to the register are limited.
Edited by: evolderen on Apr 15, 2010 8:23 AM

EDM interval meter with CT/PT ratio

Hi,
I have an interval meter register, which i have mapped in EDM as a profile. But the consumption getting recorded in the profile is not getting adjusted based on the CT/PT attached to that device.
How can the CT/PT ratio along with the meter ratio can be included to the consumption recorded in profile.
Thanks in advance

Hi,
Meters have Billable meter multipliers derived from meter and CT/PT ratios. For scaling purposes, CT/PT ratios are stored at Device level for Non Interval Meters.
For Interval Meters, consider to apply CT/PT multipliers before importing the interval data into SAP..In this case, the rate data for Interval Meters correposponding to RTP rate will ignore the CT/PT factor during the billing run.
Hope this helps..
Thanks
Vinod

Windows XP to Windows 7 USMT Replace Scenario requirements

Hi ,
I am looking for pointers to start planning with Replace scenario( old to new system) with USMT. I have config manager 2012 R2 with MDT 2013 integration. Looking for pointers to achieve this. Is it possible to achieve this using standalone media(I suspect),
If yes need some pointers around this how to go about this approach also.
Other alternative I am thinking on is using USMT manually for backing up profile\data on USB\Network and
then restore it on destination after installation on new machine. Any suggestions.
Thanks
Regards,

The easiest way to do this is to deploy a refresh task sequence to an existing XP client. It has become a little trickier in R2 (boot images issues).
See procedure here. This was for a previous version of ConfigMgr so look at the comments below.
http://www.gerryhampsoncm.blogspot.ie/2013/05/sccm-2012-sp1-step-by-step-guide-part.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

OSD Replace Scenario

We have SCCM 2012 R2 with MDT 2013 integration. The problem is that when we build a pc the logs show the following entry:
"Microsoft Deployment Toolkit version: 6.1.2373.0" which is the version number for
MDT 2012 Update 1. This cause us problems in the replace scenario. How can this be rectified?

Correct. You need to create (a) new package(s) for MDT 2013.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude
I just recreated all the packages associated with the MST OSD task sequence and created a new Task sequence. Still I do not see The
request state store and release state store step in the state restore phase? I believed this were a bug in MDT 2012 Update 1, but was this not fixed in MDT 2013?

USMT + UNC + Replace Scenario

Hi folks,
Have a customer that's looking to do USMT to a UNC path in a Replace Scenario. The drawback of course is that we can't use the State Migration Point, so Requesting/Releasing the Mig file is out; nor can we use a %ComputerName% variable, given the new computer
name.
Any ideas on how to accomplish this?
Thanks

I'm a bit unclear why the State Migration point is out and the UNC path is being used. Is it out simply because that's what the customer wants?
That said, at the end of the day USMT is just another package being delivered and run by SCCM so there's no reason you couldn't do it provided the UNC was setup with appropriate permissions.
Just set your task sequence to run the command while selecting your USMT package of choice (remember if you are still playing the Windows XP game you will need to find an older version of USMT to use than what is installed with SCCM by default).
Some syntax can be found here (this is for scanstate):
https://technet.microsoft.com/en-us/library/dd560781%28v=ws.10%29.aspx
During your replace sequence you'll simply have to prompt for the profile info so it can run the Loadstate. I'd recommend using MDT or something similar so you can make a "nice looking" UDI page. Just set a radio button that prompts
if there's a profile to restore then in your task sequence you can make a task sequence group based on the variable (so it skips the section for machines that are new deployments). If you want to get clever, during your profile backup, store the profile
in a way that you can auto-generate the restore path using the SMSTSUSers variable. THen there's one less question to ask (or at least it gets replaced with a question like "who's machine will this be").

Replace Scenario

I am trying to do a replace Scenario, however my data never gets restored on the replacement computer. I also noted in my smsts.log the following:
Property DeploymentType is now = NEWCOMPUTER
I made sure that my computer association are correct and my client replace task sequence were successful.
Any help would be appreciated.

You haven't given enough information to be able to help you. You should post details of your task sequence. Also analyse the scanstate and loadstate log files.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

MDT Replace Scenario - Computer Association

I'm in the middle of preparing for a Win7 migration and I had a few questions.
I want to use the Replace Scenario in MDT; this means I will have to use the replace task sequence to backup the users data via USMT on the old computer
and then use a standard task sequence to install Windows 7 and restore the users data on the new computer.
With SCCM you can create computer associations between the old computer and the new computer. However, I'm not sure what needs to be done in MDT to associate the old computer with the new one. I would want to do this so the replace process is more automated.
Here's what I want and #2 is where I need more insight into:
1) Run the Replace task sequence on the old computer running Windows XP. (I will provide the network share and other details to automate this)
2) When I run the standard sequence to install Win7 on the new machine, I would like it to look at the MDT database or something else and see the "relationship" and restore the USMT from the backup from the old computer from step 1, without having
to manually point to the backup.
Any ideas?

Sounds cool.
There is nothing like that out of the box with MDT, however it should be possible with some scripting.
I have done some techniques before where I have created network folders that can be "created' and written by users, but not "read" by other users.
http://xtremeconsulting.com/blog/litetouch-folder-permissions/
Then you can store the saved data in a common file.
I would then create a UserExit script to "search" for saved USMT folders, auto-populating the found values so they appear in the restore wizard page.
Keith Garner - keithga.wordpress.com

SCCM 2012 OSD Replace Scenario

Hi,
I am using SCCM 2012 with MDT integration. My MDT OSD task sequence works fine, except in a replace Scenario. I run the client replace task sequence on the old machine and the USMT back is successful. I then boot with a USB thumb drive with boot media on
the new machine. I get the correct task sequence but it seems like the OS want to install on the BDE Drive, which I to small. My new computer and refresh works without problems and install on the correct drive. I don't understand why I get this issue in a
replace scenario. I am very new to SCCM OSD and your assistance would be greatly appreciated.

Hi,
Have you checked the log file smsts.log? Maybe it can give us some clues.
Here is a similar post for your reference.
Replace Scenario alternative for USMT Migration
http://blogs.technet.com/b/deploymentguys/archive/2011/09/01/replace-scenario-alternative-for-usmt-migration.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

MR estimation- SAP internal error due to meter replacement

Hi,
We are getting an error in Tcode EL28 when the MR estimation is done and a device replacement exists in this period.
There is a SAP note Note 959809 - " EL-262: Error when reading the internal table IDEVNUM" giving fix for this error. We have already implemented this note last year. This seems to be correction in the FM:ISU_CONSUMPTION_PROJECT . I am not sure if this FM is being called at all in El28.
Has anyone come across this scenario.
John

Hello,
Are notes 1106884 & 819675 also implemeted on your system?
Regards
Olivia

CS-Replacement Scenario Settings

Hi All,
In a CS (replacement only) scenario where a replacement part is issued in lieu of defective part, the Outbound of the fresh part happens before the inbound of defective part.
I have used the repair order type RA.No billing in the scenario, neither is there any service item.
My Question
1) The item categories that need to be used are the following or am I missing something.
IRRS
IRAL
IRRE
IRRP.
2) I am able to create inbound delivery (the Repair order has Schedule line for it) but I am not sure how to go about creating an outbound delivery and whether and how a fresh SL can be generated for the same.
Also please note; within the repairs order under the repairs Tab I am getting two line entries; one for the returns and one for the replacement but no sL for outbound delivery is getting generated.
3) Standard Repair Procedure for replacement needs any modifications?
Your inputs will be highly appreciated.

Hi
Here in step 2 after doiing the inbound delivery have you technically completed the SM order?
once you do the technical compliction in IW32 you can see repaired qty withfor outbound delivery
check all this make an out bound delivey as usual if serial no is assigned just don't foget to follow
that too.
If anyfing more please get back
Thank you

UMST Replace scenario

I have the following scenario:
Windows 7 machines with a C:\ and a D:\ partition. I need to do a replace and backup data on C:\ and D:\ and then restore to a single partition on Windows 8. I am using boot media on memory stick to start the build on the replacement machines.
The problem is that the data try to restore to the memory stick, which is the D:\ drive during the build. How do I overcome this?

This is a great blog post on dealing with multiple partitions with USMT.
http://blogs.technet.com/b/configurationmgr/archive/2010/12/01/new-kb-a-system-center-configuration-manager-2007-sp2-task-sequence-may-fail-if-the-computer-has-multiple-drives-or-partitions-and-usmt-4-with-hardlinking-is-being-used.aspx
Best, Jacob I'm a PC.

Replace Scenario : USMT Break Office 2013

Hi guys, in the midst of a project to refresh client Operating Systems - the refresh involves using the User State Migration Tool version 5 to capture user settings/preferences and data from old devices and restore to new machines once the Operating
System and applications such as Office are deployed.
SCCM infrastructure is 2012 SP1. Source/old machines are running Windows Vista or Windows 7, Office 2007 and have the Enterprise Vault Add-In for Outlook version 9.0.2.1136. Target/new machines have Windows 7 SP1, Office 2013 and Enterprise Vault Add-In
for Outlook version 10.0.3.1090. All operating systems are 32-bit.
USMT 5 has been extended with the hotfix for Office 2013 (new MigApp.xml) - otherwise the capture is effectively vanilla.
On machines where the User State Migration Tool is used every time Outlook is opened the following error is presented:
Either there is no default mail client or the current mail client cannot fulfill the messaging request.
If Outlook is started using outlook.exe /safe it opens without issue. If I disable the Enterprise Vault Add-In within Outlook, it opens without issue.
I’ve been through the following to no avail:
http://support.microsoft.com/kb/813745
http://www.symantec.com/business/support/index?page=content&id=TECH20486&profileURL=https%3A%2F%2Fsymaccount-profile.symantec.com%2FSSO%2Findex.jsp%3FssoID%3D1377114331330xz9e5SBBuT28VInhuBHCHNIlGKF39rjY1sr1c
Removing the Enterprise Vault Add-In and re-installing doesn’t resolve the issue, neither does the ResetEVClient.exe utility.
Run fixmapi.exe to no avail.
A repair of Office itself fixes the problem, however this is not feasible across the thousands of machines we're looking to migrate!
What we have noted is that the issue affects every Windows profile on the machine, those copied over by the User State Migration Tool, but also new ones - so whatever is occurring is breaking Outlook/the Enterprise Vault Add-In for the machine, not a specific
profile.
Finally, if we don't use USMT (not viable on the number of machines we have to replace!) I'm able to logon, and under a fresh user profile can open Outlook without issue.
If anyone has any ideas please let me know!
MCTS 70-640 | MCTS 70-642 | Prince2 Practitioner| ITIL Foundation v3 | http://www.cb-net.co.uk

Finally have a workaround - known error caused by USMT. Working with MS PSS modification of the following reg key will resolve the issue without an Office repair:
HKLM\SOFTWARE\Clients\Mail\Microsoft Outlook\MSIComponentID
Set this to the following value to resolve the issue: (6DB1921F-8B40-4406-A18B-E906DBEEF0C9}Initial tests excluding this from capture/restore via a custom XML but this doesn't seem to work.
We're now using the following Run Command Line step in the USMT Task Sequence to resolve the issue:
reg add "HKLM\SOFTWARE\Clients\Mail\Microsoft Outlook" /v MSIComponentID /t REG_SZ /d {6DB1921F-8B40-4406-A18B-E906DBEEF0C9} /f
MCTS 70-640 | MCTS 70-642 | Prince2 Practitioner| ITIL Foundation v3 | http://www.cb-net.co.uk

How to: UDI Wizard: Select scenario: replace or a new computer

Hi!
To be quick, we've got two possible scenarios:
1. Either it's a new computer or
2. It's a replace scenario, so an old computer will be replaced with a new one.
In the case 1, technician selects appropriate applications and makes it sure that the end user gets all the application they need;
and in the case 2, technician inserts computer name of the old machine, and all the applications that we support and that are installed on the old workstation are installed (all the data about applications that are installed will be retrieved from a database)
So, I've created a custom UDI page, that has two radio button options: 1. New Computer; 2. Replace an old computer.
When the techician selects option number 2, how do I display a page that requires to input details of the old computer, and that page is skipped if option 1 selected?
Br,
Ville

Hi,
Please refer to the link below:
Learning MDT 2012’s User-Driven Installation (UDI)
http://blogs.technet.com/b/chrad/archive/2012/07/26/learning-mdt-2012-s-user-driven-installation-udi.aspx
Otherwise, your question seems to be related to MDT. You may also choose to post there to get more effictive help.
https://social.technet.microsoft.com/Forums/en-US/home?forum=mdt
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

ISU_S_WORKLIST_INSTALL - Interval Meter Replacement scenario

Similar Messages

Maybe you are looking for