Isues with email STRANGE ISSUES...
Need some advice on the following.
I have been having email issues with the IP4…I think it might be related to having too many SMTP servers. If I go into settings, mail contacts etc, the email account, then SMTP outgoing mail servers I have 9 servers listed. Granted 7 of those are correct and those are turned off. I only have one turned off.
Tried to delete them but there is no option to do that…is there a way to delete. Did a restore but that did not seem to help…
I have been getting duplicate emails, emails that are showing I have yet they are not there, unless I go into trash and then back to the inbox they will show up, just a lot of very strange things happening.
Can anyone assist with this..
I have 23 servers listed with no issue (for 14 email accounts)... you can delete any server... just go into the account info for the email account..
Scroll down to SMTP where it should list the active servier... then touch the ">" at the right side of the server name....to get to the full list of servers... touching the ">" sign by any of these server's names will take you to a screen where you can delete the server....
Message was edited by: pberk
Similar Messages
-
Printing problem with emails - scaling issue
Hi everyone,
I'm having a printing problem when I print out my emails. Under the email preferences, the scaling is set to 100%, but the actual printouts look to be about 30%.
I have no other problems with any other applications (documents, web pages, etc.) and I'm not sure where to look next.
I'm new to the mac world (my background is with PC's), so any guidance at all would be GREATLY appreciated!!
(PS - I just updated my printer driver yesterday - had the problem both before and after that install)
Thanks in advance for your advice,
- wackylady
g4 Mac OS X (10.2.x)bump -
any help? -
ORA-39165: During Expdp Strange Issue
Hi All,
DB -- 11.1.0.6.0
OS --HPUX Itanium.
Today , I came across with one strange issue , where EXPDP tells us the scehma does not exist. we then tried to look into this this particular schema into the database and discovered it's does exist there. One wearied thing is that , all the tables inside this schema are of same size and have bit strange naming convention.I also discovered the same issue with one more database on the same host.
CPMDVFDM> Total estimation using BLOCKS method: 0 KB
ORA-39165: Schema WMSYS was not found.
ORA-31655: no data or metadata objects selected for job
Job "SYS"."SYS_EXPORT_SCHEMA_01" completed with 2 error(s) at 11:02:43
[1] + Done(5) expdp \'/ as sysdba\' directory=data_pump_dir1 logfile=wmsys.log schemas=wmsys &
SQL> select table_name from dba_tables where owner='WMSYS';
TABLE_NAME
WM$RIC_TABLE
WM$RIC_TRIGGERS_TABLE
WM$INSTEADOF_TRIGS_TABLE
WM$WORKSPACES_TABLE
WM$VERSION_TABLE
WM$NEXTVER_TABLE
WM$VERSION_HIERARCHY_TABLE
WM$VERSIONED_TABLES
MAX(BYTES) SEGMENT_NAME
65536 WM$RIC_TRIGGERS_TABLE
65536 WM$WORKSPACES_TABLE
65536 WM$MODIFIED_TABLES
65536 WM$NEXTVER_TABLE
65536 WM$CONS_COLUMNS
65536 WM$MP_PARENT_WORKSPACES_TABLE
65536 WM$LOG_TABLE
65536 WM$ADT_FUNC_TABLE
65536 WM$UDTRIG_INFO
65536 WM$VT_ERRORS_TABLE
65536 WM$NESTED_COLUMNS_TABLE
MAX(BYTES) SEGMENT_NAME
65536 WM$VERSIONED_TABLES
65536 WM$RESOLVE_WORKSPACES_TABLE
65536 WM$LOCKROWS_INFO
65536 WM$MP_GRAPH_WORKSPACES_TABLE
65536 WM$BATCH_COMPRESSIBLE_TABLES
65536 WM$TMP_DBA_CONSTRAINTS
65536 WM$RIC_LOCKING_TABLE
65536 AQ$_WM$EVENT_QUEUE_TABLE_S
65536 WM$INSTEADOF_TRIGS_TABLE
65536 WM$VERSION_TABLE
65536 WM$VERSION_HIERARCHY_TABLE
MAX(BYTES) SEGMENT_NAME
65536 WM$WORKSPACE_PRIV_TABLE
65536 WM$WORKSPACE_SAVEPOINTS_TABLE
65536 WM$UDTRIG_DISPATCH_PROCS
65536 WM$REPLICATION_TABLE
65536 WM$CONSTRAINTS_TABLE
65536 WM$EVENTS_INFO
65536 WM$LOG_TABLE_ERRORS
65536 WM$REMOVED_WORKSPACES_TABLE
65536 WM$HINT_TABLE
65536 WM$RIC_TABLE
65536 WM$ENV_VARS
MAX(BYTES) SEGMENT_NAME
65536 WM$SYSPARAM_ALL_VALUES
65536 WM$EVENT_QUEUE_TABLE
65536 SYS_IOT_OVER_12359
65536 WM$REPLICATION_DETAILS_TABLERegardsThis is not true, there is a set of schemas that Data Pump knows are really not user schemas and therefore are not exported. Most contain sys, but they don't have to.
If you created a schema called sysxyz, it would be exported.
Dean -
Hello everyone.
Faced very strange issue with account, which is used to run SSIS package.
The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
Any ideas, please?
MCPHere's the real log output:
Date 16.04.2014 12:47:09
Log Job History (RU-BW: Update)
Step ID 1
Server Server
Job Name RU-BW: Update
Step Name bw_import_cust_master_data
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility Version 10.50.4286.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 12:47:09 Error: 2014-04-16 12:47:11.45
Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End Error Error:
2014-04-16 12:47:11.47 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End
Error Error: 2014-04-16 12:47:11.48 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid
characters. End Error Error: 2014-04-16 12:47:11.48 Code: 0xC020207E Source: Import file Flat File Source [1] Description: The file name is not valid. The file name is a device or contains invalid characters.
End Error Error: 2014-04-16 12:47:11.48 Code: 0xC004701A Source: Import file SSIS.Pipeline Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:47:09 Finished: 12:47:11 Elapsed: 2.324 seconds. The package execution failed. The step failed.
MCP -
Strange issue with a users meeting turning into a appointment.
So we have a user that is administrative assistant to many executives.
Today they created a meeting today and invited a few people. (for whatever reason, the user has themself as a shared calendar. Not sure if they created the meeting under their own shared calendar for themself or not)
sometime later they decided to add another user to the meeting, but the meeting no longer had attendees and turned into an ppointment instead.
The previous attendees still have their meetings with all the correct info(minus the user they tried to add)
Also when checking the OWA vs the CLIENT, you can see the sent email/invite in Outlook 2011 (yes its a mac they're using) in the Sent folder. However, it was not in the Sent folder in OWA, and instead it was in the trash. The one in the
trash in OWA however, instead of containing the original users as the attendees, contained the New user they were trying to add.(all based on the time the original invites were sent out) The first invite was sent out @ 1:30pm while the new user invite
was (a completely different meeting invite due to the original not being there as a meeting) was sent out at 2:30pm.
Is there any way to sort of monitor or track this sort of transacation? A few users in question always seem to have these sort of strange issues.Hi,
According to your description, I understand that:
1. There is a delegate set for several managers.
2. The delegate created a meeting with some attendees for a manager and all attendees received it successful in Calendar.
3. When the delegate sent a meeting updates, the attendees in organizer’s calendar were missing and there is no updates in attendees’ calendar.
Is it right? If I misunderstand, please point it out.
Please check whether there are any mobile devices used in receiving or accepting the meetings. Please confirm whether all attendees in organizer’s calendar are also missing in OWA. we can stop using any mobile devices and try creating new meeting then sending
updates in OWA to try whether the issue persists.
Additionally, please refer to the following articles for more information about Best practice when when using the Outlook Calendar:
http://office.microsoft.com/en-us/outlook-help/best-practices-when-using-the-outlook-calendar-HA104004449.aspx
http://support.microsoft.com/kb/899704/en-us
Thanks,
Winnie Liang
TechNet Community Support -
Strange issue with WEBI schedule Report
Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regardsHi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika. -
Multiple OS issues with Email set up; "People" ; Synching phone not working as advertised
Nokia Lumia 822
Purchased yesterday (2/10/13)
So far I have spent 14 hours attempting to resolve what feel like endless errors and bugs. If I can;t get these resolved in the next 48 hours the phone goes back. I am so disappointed I waited especially for this phone - heard great stuff. My experience is it sucks. Worst phone ever.
1) POP3 email accounts are non functional. I have attempted to set up and delete and re-set up now multiple times. Each time presents a fresh new nightmare.
Issue 1 - Email account receives email but will not send. Error message goes something like <" Problem sending message. Message failed to send. Problem with Files or Data on your device." >
Issue 2 - Tapping email + accounts sends me back to start screen cannot even set up account
Issue 3 - I get to add email account I enter my information but no account is created
Issue 4 - I set up an account and I get an error message stating my information cannot be found.
Issue 5 - trying to open email from start screen just resets to start screen over and over and over NEVER opens the account.
These are deal breaker issues. I have multiple email accounts on different platforms. If I cannot access my various emails AND send from those accounts this is NOT the phone for me.
2) PEOPLE does not function. ALSO multiple various issues and never the same one twice.
Issue 1 - I tap on a contact and get sent to the start screen over and over and over and over again.
Issue 2 I tap on a contact and the phone freezes and wont respond unless I pull the battery
Issue 3 I open a contact and make an edit, save the contact but the change is never reflected in the list
Issue 4 I try and search for a contact and the search freezes - only option is to return to start screen
3) Scrolling thru any APP randomly takes me back to start screen.
I dread attempting to synch Outlook calendar and contacts on my PC to hotmail - especially if I can't even set up email. And it seems like even holding it will jettison me out of anything I'm doing and back to start screen.
If I can't get these issues resolved. look like I'll be going back to my 3 year old Blackberry Bold which performed flawlessly. It may not be the most impressive phone out there but it did what I needed it to do with out any issues.Interesting Twitter conversation VZWSupport on Twitter. It was suggested to try a HARD reset - and if that doesn't work take the phone back.
Since I don;t have anything set up yet that's my solution.
I see a BlackBerry Z10 in my future -
Strange issue with RAM upgrade: It works but it doesn't! Please help.
Hello Everyone,
I have a very strange issue with my iMac since upgrading my RAM from 4 to 12 gig. When I first installed the new RAM it booted up and ran great. The next time I went to boot the iMac up it swtiched on but didn't get as far as the first white boot up screen. I tried turning it off and on a few times using the power on/off button but still no success. I decided to remove the RAM and reseat it. The computer then booted up again fine. Here's the problem though: when I went to switch my iMac on the next day it wouldn't boot up. Again, I took the RAM out and put it back in and the iMac booted up fine. I've checked the status of the RAM in the system profiler and it reports that everything is OK. So, I'm at a loss. Obviously, I don't want to go through this process every time I want to start up my Mac. Any ideas/solutions would be very gratefully received.
Many thanks in advance.I completely agree with you. It will be one of the 3 issues you outline. The machine was bought brand new and has never given me a problem. It is just the introduction of the new RAM that has started a problem. However, I did just risk a restart and it booted up fine. I don't know if a restart is any different to shutting down and then pressing the on/off button to start the computer. Maybe my last reseating has done the trick or maybe my thinking is flawed because restarting involves a different process to booting up by pressing the on/off button. I don't know.
In the part of the world I'm sitting in it's night time now so I will leave the diagnostics running and check the results in the morning. I hope the issue is now resolved anyway. This sort of thing takes me back to my dark PC days although in this case I know it's probably not the Mac's fault.
Thanks again. Very much appreciated. -
Email Integration Scenario - Issue with email body content
Hi All,
We have an Email to File Scenario. PI is connected to Outlook server using Sender Mail Channel using POP3. We are able to fetch and display emails correctly for most of the received emails.
However we notice that for Email sent from few Mail server like Yahoo mail, Gmail, Hotmail, we are not getting the Email content correctly.
Issue is happening with Emails sent in HTML/Rich text format (containing Formatting and without any attachments). In the receiver system we see the email is converted to Plain text format. If the same email is sent with some attachment / Embedded Image, we get all the Formatting correctly in Receiver System.
A closer look at Pimon we found the following:
1. When Email is sent with Formatting (without any attachment/ image) in Pimon we see that it creates 2 Payloads (screenshot attached)
2. The First Payload - MainDocument contains the Email content in XML format, but is missing the Email formatting data in it.
3. The other Payload - ([email protected]) contains the actual Formatted Email Content.
Not sure why the formatting data is missing from MainDocument. Instead its coming in other payload. Due to this we are not able to display correct data at receiver end as we parse the MainDocument as our Input Payload Stream
Note: We cannot use payload swap bean, as it will swap the data for all the incoming emails which we don't want.
Anyone faced similar issue? Steps to get proper formatting data in MainDocument..
Suggestions / Inputs will be highly appreciated.
Thanks,
AzharAzhar,
We cann't influence the behavior of Gmail, Hotmail. But have to get HTML as main payload, so we have to swap payload (not always, in some cases based on a condition). Please try below Java mapping. In Operational Mapping set "Read Attachments".
package javaapplication1;
import java.io.*;
import com.sap.aii.mapping.api.*;
import java.util.Collection;
public class NewClass6 extends AbstractTransformation {
@Override
public void transform(TransformationInput transformationInput, TransformationOutput transformationOutput) throws StreamTransformationException {
try {
InputStream inputstream = transformationInput.getInputPayload().getInputStream();
OutputStream outputstream = transformationOutput.getOutputPayload().getOutputStream();
byte[] b = new byte[inputstream.available()];
inputstream.read(b);
//Loop over attachments and if attachment name starts with 'payload-' swap it with main payload. Edit below logic as needed.
Collection<String> listAtt = transformationInput.getInputAttachments().getAllContentIds(true);
for (String att : listAtt) {
if (att.startsWith("payload-")) {
b = transformationInput.getInputAttachments().getAttachment(att).getContent();
outputstream.write(b);
} catch (Exception exception) {
getTrace().addDebugMessage(exception.getMessage());
throw new StreamTransformationException(exception.toString()); -
Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
Here's what I did to test:
Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured. I transferred onto their machines, hooked up my Sony D8, and attempted to play the video. It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop). I even tried changing each machine's firewire driver to the legacy one and same results. I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver. Very annoying. I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
I have 2 other things I can try:
1. Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
2. Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/). I can't do it with my Home edition apparantly.
Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
Tim -
I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before
Are you watching this content though iCloud or though from iTunes on your local computer? If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens? This is geerally a much more reliable way to view the content. Easer to fast forward and rewind too.
- I have a stable internet connection
Clearlly you don't
>(Ive tested on other devices)
Which does not tell you anything about the specific connnection from ATV to iCloud.
>I am able to stream Netflix problem free from my AppleTV without so much as a hicup
Again which does not tell you anything about the specific connnection from ATV to iCloud.
>- I am able to download the episodes to my phone, ipad, and computer without any issues
Again which does not tell you anything about the specific connnection from ATV to iCloud. It does remove your ISP throattly traffice as a possible cause though. So that is good.
Have you checked your wireless rounter? Tried doing the factory restor on it? Upgrading it's firmware? Is it and or ATV getting extreamly hot when this problme happens? -
Strange issue with POF: byte array with the value 94
This is a somewhat strange issue we’ve managed to reduce to this test case. We’ve also seen similar issues with chars and shorts as well. It’s only a problem if the byte value inside the byte array is equal to 94! A value of 93, 95, etc, seems to be ok.
Given the below class, the byte values both in the array and the single byte value are wrong when deserializing. The value inside the byte array isn’t what we put in (get [75] instead of [94]) and the single byte value is null (not 114).
Pof object code:
package com.test;
import java.io.IOException;
import java.util.Arrays;
import com.tangosol.io.pof.PofReader;
import com.tangosol.io.pof.PofWriter;
import com.tangosol.io.pof.PortableObject;
public class PofObject1 implements PortableObject {
private byte[] byteArray;
private byte byteValue;
public void setValues() {
byteArray = new byte[] {94};
byteValue = 114;
@Override
public void readExternal(PofReader reader) throws IOException {
Object byteArray = reader.readObjectArray(0, null);
Object byteValue = reader.readObject(1);
System.out.println(Arrays.toString((Object[])byteArray));
System.out.println(byteValue);
if (byteValue == null) throw new IOException("byteValue is null!");
@Override
public void writeExternal(PofWriter writer) throws IOException {
writer.writeObject(0, byteArray);
writer.writeObject(1, byteValue);
Using writer.writeObjectArray(0, byteArray); instead of writer.writeObject(0, byteArray); doesn't help. In this case byteArray would be of type Object[] (as accessed through reflection).
This is simply put in to a distributed cache and then fetched back. No EPs, listeners or stuff like that involved:
public static void main(String... args) throws Exception {
NamedCache cache = CacheFactory.getCache("my-cache");
PofObject1 o = new PofObject1();
o.setValues();
cache.put("key1", o);
cache.get("key1");
Only tried it with Coherecne 3.7.1.3.
Cache config file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>my-cache</cache-name>
<scheme-name>my-cache</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<distributed-scheme>
<scheme-name>my-cache</scheme-name>
<service-name>my-cache</service-name>
<serializer>
<class-name>
com.tangosol.io.pof.ConfigurablePofContext
</class-name>
<init-params>
<init-param>
<param-type>string</param-type>
<param-value>pof-config.xml</param-value>
</init-param>
</init-params>
</serializer>
<lease-granularity>thread</lease-granularity>
<thread-count>10</thread-count>
<backing-map-scheme>
<local-scheme>
</local-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
</caching-schemes>
</cache-config>
POF config file:
<?xml version="1.0"?>
<pof-config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://xmlns.oracle.com/coherence/coherence-pof-config"
xsi:schemaLocation="http://xmlns.oracle.com/coherence/coherence-pof-config coherence-pof-config.xsd">
<user-type-list>
<!-- coherence POF user types -->
<include>coherence-pof-config.xml</include>
<user-type>
<type-id>1460</type-id>
<class-name>com.test.PofObject1</class-name>
</user-type>
</user-type-list>
</pof-config>Hi,
POF uses certain byte values as an optimization to represent well known values of certain Object types - e.g. boolean True and False, some very small numbers, null etc... When you do read/write Object instead of using the correct method I suspect POF gets confused over the type and value that the field should be.
There are a number of cases where POF does not know what the type is - Numbers would be one of these, for example if I stored a long of value 10 on deserialization POF would not know if that was an int, long double etc... so you have to use the correct method to get it back. Collections are another - If you serialize a Set all POF knows is that you have serialized some sort of Collection so unless you are specific when deserializing you will get back a List.
JK -
Strange issue with external monitor, only working when external speakers plugged in
Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap non-apple adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?Hello cgoldberg11
Please go to the below link to test if you are having a speaker hardware failure.
Testing for Hardware Failures (Windows 7)
This will rule out hardware failure, let me know how that goes.
Thanks
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. .....
Reguards,
Mo -
Strange Issue with Planning 11.1.2
Hi All,
Recently i've installed Hyperion 11.1.2 and i've noticed a strange issue. I've logged in to workspace as administrator, everything is fine. Now i logged off and then login as a user with role as Planner. He should not see Planning Administrator menu right ? But Planner can also able to see the admin menu. Now i've logged off and cleared all the Cookies, history in the Browser, and login as a user now, it has given the correct message as "Application is in maintenance mode, new logins are not allowed" and unable to see Admin menu now. Why it is happening. Is it really a bug or issue with the browser. Even if there is a issue with Browser, it should not work in this way right ? Pls. adviceI have seen issues with other products in the 11.1.2 line retaining permissions with user login/logout on the same browser.
As John says log a case show them how to replicate and continue forward. Likely 11.1.1.2.1 fixes this and it's know however get the case logged to get it in the pipeline in case you've discovered a new defect.
And going forward you will need to ensure if you are logging in as a high access user on a user desktop to exit all browsers and ensure they are not running in task manager before leaving that pc.
Regards,
John A. Booth
http://www.metavero.com -
Strange Issue with using ExportToHttpResponse for exporting to Excel
Hi,
We are working with BO XI R2 with .Net 2.0.
We are using ExportToHttpResponse method to export the Crystal Report to pdf/excel and directly opening the export in a browser window.
Code being used is as follows :
For pdf : rd.ExportToHttpResponse(ExportFormatType.PortableDocFormat, oResponse, false, Name);
For Excel : rd.ExportToHttpResponse(ExportFormatType.Excel, oResponse, false, Name);
where 'rd' is ReportDocument instance.
The strange issue here is that for pdf output this works as desired and the exported report is directly opened in the browser window. However when it comes to Excel ; it does not open the exported file in the browser window and gives a prompt to open/save file. Even if the 'asAttachment' parameter of ExportToHttpResponse method is set to false it still is sending the exported file as an attachment to the browser and not opening it directly (as it is happening in the case of a pdf export )
Do we need to set the Response.ContentType to excel ; if yes then why it is working in case of pdf.
Can any one please advise about this strange issue .
Thanks
Vinayak Vidhate>
Ludek Uher wrote:
> Try the following:
>
>
> System.IO.MemoryStream oStream = (System.IO.MemoryStream)crReport.ExportToStream(ExportFormatType.Excel);
> Response.Clear();
> Response.ClearHeaders();
> Response.AddHeader("Content-Disposition", "inline;filename=exportedreport.xls");
> Response.ContentType = "application/vnd.ms-excel";
> Response.BinaryWrite(oStream.ToArray());
> Response.Flush();
> Response.Close();
>
> The code works on my machine.
>
> If that does not help, consider using a utility such as [Charles|http://www.charlesproxy.com] or [Fiddler|http://www.fiddlertool.com/fiddler] to see what's going on.
>
>
> Ludek
Thanks for the response Ludek .
I was going through some othere threads and saw that ExportToHttpResponse is more preferred over ExportToStream . I even checked for setting up the Response.ContentType to Excel . I think I shoulfd give it a try to use ExportToStream.
Let me know if any one else has any other suggestion(s).
Maybe you are looking for
-
Why did a game app use my iCloud storage when I have iCloud backup turned off?
I have a game app that I just bought but when I looked in my settings under iCloud>Storage & Backup>Manage Storage then under Documents & Data I noticed that game had used some iCloud space. I have iCloud backup off but in settings>iCloud Documents &
-
HT2488 How do I create an iCal Alarm to delay send an e-mail in my Drafts folder of Mail?
I've learned how to use iCal Alarm to schedule sending an e-mail. However, all of the instructions I read say that I have to type the e-mail inside the automator's "New Mail Message". Is there a way to type the message in Mail, save it in drafts, an
-
i have an Airport Extreme wireless router, HP Folio laptop (company supplied) and a Canon PIXMA MX882 wireless printer,copier, scanner and fax. when i am VPN's in thru CISCO VPN to my company Intranet site I cannot print wirelessly. i have to turn of
-
Serial number recovery from a damaged drive will not activate
purchased replacement disks aor mac book Illustrator CS3 for a new hard drive. had the serial numver extractred from the old hard drive, but I get a red X. Suupport says I need to go to the forum as,it is not a valid serial number.
-
Image Preview in Library Panel
Hi Guys, I have been having trouble trying to figure out about the live previews of the widgets. I created a widget and it works perfectly but how can I make the preview appear in the library panel and not the muse home page. Here's an example of one