Isuue with SLR report
Hi,
We have solution manager with EHP1 in our landscape. We have configured the SLR report for the contents Hardware configuration, system availability, key performance indicators, ABAP run time errors but in the generated SLR report, I can find only abap dump and key performance indicator.That toooo key performance indicator is balnk w/o any data.
can you please suggest what needs to be done to resolve this issue.
Thanks,
Generic.
Dear
You need to know where those are originating from to start with.
I'm sure you can find documentation on the sources of those SLR points
Hardware information might originate from transaction SMSY so you should check the information filled in, in transaction SMSY for your host for example, for your database and so on. There is also a tool available to check how consistent your system is in transaction SMSY called Landscape Verification 1.0 which is a small add-on that you can install on Solution Manager (interesting and worth it). Installation is not difficult and little setup is required. You can find information and guide on SDN.
Check service marketplace for relevant notes on SLR reporting. There are a lot of bug fixes available as well but there are also a lot of dependencies when you want to implement all of them.
For example note on system availability:
[Note 1332677 - ST03N-based system availability in SLR no longer supported]
You can use keywords "SLR reporting" to find a lot of relevant notes which can answer your questions.
Kind regards
Tom
Similar Messages
-
Customer Reconcialation SLR Reports
Hi friends,
i am unable to find Customer Reconcialation SLR Reports,
plz help me Where can i find these and send useful links r any documentations
Thanks
NarenHi,
As of ERP 2004 there are two reports for customer reconciliation: RFICRC00, RFICRC20 similar to OI Recon for GL and the docu for GL is valid:
Help >> SAP Library >> SAP ERP Central Component >> Accounting >>
Financial Accounting >> G/L accounting >> Closing operations and
reporting >> Balance sheet preparation >> Reconciliation of G/L accounts
in the corporate group (cross-system)
The functions are available using the SAP application menu under the
following path:
SAP menu >> Accounting >> Financial Accounting >> Customers or Vendors
>> Periodic Processing >> Closing >> Check/Count >> Cross-system
inter-company reconciliation
In former releases my advice would be to use 0SAPDUEAN-01 and compare it with FBL5N.
Best regards,
Sonsoles -
Hi all,
i have created the SLR report in Solution Manager which is genrated on 7th Jun 2011 for the MAY,
But in the report it is i am able to get only data till APRIL ?
Please let me know the issue?
Regards,
Neni
Edited by: swaroop v on Jun 14, 2011 11:06 AMHello,
SLR reports can have various sources of data, i.e. CCMS, EWA, etc.
When data is missing in the SLR report, it is often a good idea to check the EWA reports for the same periods to see if they are having any issues with missing data, because if they are, this will be reflected int he SLR reports.
If there are no issues with the EWA reports for the same systems as the SLR report, then you should check the SM:EXEC SERVCES log for any errors. It may be trying to perform the session for the SLR and might be failing.
Is a report beiong generated with no data, some data, or no report is being generated at all? This can also help to determine where the issue is occuring?
Typically you should schedule the SLR reports a day after the EWA reports, to ensure they have been processed.
Regards,
Paul -
Hi,
I have installed CCMSping and connected with my solution manager as CEN. Agent is running fine and availability is 100%. But when I am trying to connect the same for SLR reporting, I am not able to find the monitoring tree element for the availability part. Do I need to do anything more to activate the SLR reporting? Why I am missing some monitoring segments.
Could you please help me in this?
RajeevHi,
I have done the configuration completely now. If I generate the report now, it gives me blank report as it is generating for the previous week. so is it normal to wait for one week to check the content of the SLR or is tehre any other way to see that.
In the same way, I have assigned the MTE classes to CPH schema, but no data collected yet. Is there any setting which will help to collect the data quickly? I re checked and all the BGD jobs are running fine.
Rajeev -
EWA and SLR reports in different solutions, possible?
Hi,
We have a central Solution Manager to manage all the SAP systems of one of the business units of our company with 5 plants in different countries (Germany, USA, Argentina, Spain). The systems of each plant are administrated by the local SAP administrators in each plant so we have defined 2 solutions (productive and non-productive systems) for each plant and the EWA reports are activated in these solutions. We have another "reporting" solution for our IT Managers (situated centrally in Germany) with the productive systems of all the 5 plants. The SLR reports are activated in this solution.
So the solution landscape in our SolMan is as follows:
- Solution Plant1 productive systems: EWA reports activated for the systems
- Solution Plant1 non-productive systems: EWA reports activated for the systems
- Solution Plant2 productive systems: EWA reports activated for the systems
- Solution Plant2 non-productive systems: EWA reports activated for the systems
- Solution Plant5 productive systems: EWA reports activated for the systems
- Solution Plant5 non-productive systems: EWA reports activated for the systems
- Solution Reporting (all plants productive systems): SLR reports activated for the systems
SLR report data is obtained from the EWA reports... so, must we activate too the EWA reports for the systems of the "Solution Reporting"? If we activate the EWA reports for the systems in this solution they would be duplicated (in 2 solutions) so there would be a duplicated extraction job bein executed in the satellite systems and the EWA data would be duplicated in the SolMan. I mean, is EWA report data "solution specific" or is it "system specific" and then once it is generated in one solution it can be executed for the SLR reports of a different solution?
Thanks in advance,
JonDocumentation on how to fufil this business requirement where you want a separate solution in the same Solution Manager system containing the same systems for which EWA is already running in other solutions is a little hard to find
I feel EWA is system specific - if by system specific you mean you can only get 1EWA/SLR by system not by solution
Another issue might also be adding systems currently in other solutions to a new solution
I could be wrong though - maybe there are other experts out there that can enlighten us
Best wishes
Stuart -
Help with Upgrade report in FI
Hey All Gurus,
Im in a thick soup here. I am trying to do something like this -
if you see the selection screen i have rep and super rep, when a user enters a rep value --- it should use the same value to pull all open items for the super rep as well, since they are essentially the same. please help! this one needs to be done fast. i am pasting the code so that it will be easier ...
thanks a million!
*& Report ZFDOFW04_NEW
REPORT ZFDOFW04_NEW MESSAGE-ID FR
LINE-SIZE 132
LINE-COUNT 60.
*==================================================================
Program: ZFDOFW03 - Aged Trial Balance Report
This produces an Accounts Receivable Past Due Aging Report
in a more simplified/condensed format than the
SAP supplied aging report program - RFDOPR10.
This program is a modified copy of RFDOFW00, - a SAP
Future-Due Report.
This was a 'rush' job - program probably should be
rewritten someday not using logical databases as that
maybe why this runs so slowly!
Original: Feb 1997.
MAINTENANCE HISTORY:
NES071797 Copied from ZFDOFW03. Adding parameter for saeles rep.
JDEDERER - changed header text so it is differnet from ZFDORW03. 9/23
*TEXT SYMBOLS :
001 Open items per
002 O p e n
003 D u e o n
004 cc ba in total
005 until
006 Days until
007 Days over
008 Days
009 over
011 valid until........
012 Insurance limit.....
016 F u t u r e
017 + days
018 D u e
020 Last dunn.notice...
021 Dunning level....
030 S U M M A R Y S H E E T
031 =====================
050 Name Page
051 Burton Snowboard
SELECTION TEXTS:
SUMMEN Output totals only
TAGE1 Due date I until
TAGE2 Due date II until
TAGE3 Due date III until
TAGE4 Due date IV until
TABLES: T001, KNA1, KNB1, KNB5, BSID, BSEGA, RFPDO1, KNVP,
T014, "credit control areas JAM
KNVK, "cust master - contact partner JAM
T014T, "Credit control areas names
BKPF, "TONY ISSUE 4743
TVKO, "TONY ISSUE 4743
KNKK. "cust master - credit mgmt JAM
TYPES: BEGIN OF TOT_TYPE, "DEVK939546
BUKRS LIKE LFB1-BUKRS, "DEVK939546
GSBER LIKE BSIK-GSBER, "DEVK939546
KKBER LIKE BSID-KKBER,
RAST1 TYPE P, "DEVK939546
RAST2 TYPE P, "DEVK939546
RAST3 TYPE P, "DEVK939546
RAST4 TYPE P, "DEVK939546
RAST5 TYPE P, "DEVK939546
RAST6 TYPE P, "DEVK939546
RAST7 TYPE P, "DEVK939546
END OF TOT_TYPE, "DEVK939546
TOT_TAB TYPE TOT_TYPE OCCURS 0. "DEVK939546
CONSTANTS:
C_FALSE TYPE I VALUE 0, "JAM
C_TRUE TYPE I VALUE 1.
DATA: BEGIN OF GTAB OCCURS 1000,
SUPER(10) TYPE C, "TONYC
REP(10) TYPE C, "TONYC
FILKD(10), "tonyc show buying groups
LAND1 LIKE KNA1-LAND1,
GSBER LIKE BSIK-GSBER,
REGIO LIKE KNA1-REGIO,
NAME1 LIKE KNA1-NAME1,
NAME2 LIKE KNA1-NAME2,
ORT01 LIKE KNA1-ORT01,
TELF1 LIKE KNVK-TELF1, "telephone number JAM
CONT_NAME1 LIKE KNVK-NAME1, "contact name JAM
NAMEV LIKE KNVK-NAMEV, "contact name JAM
KUNNR LIKE KNA1-KUNNR, "TONYC
BUKRS LIKE LFB1-BUKRS, "TONYC
KKBER LIKE BSID-KKBER, "tonyc issue #2500
ZTERM LIKE KNB1-ZTERM, "tonyc issue #2500
KLIMK_TXT(22) TYPE C, "credit limit JAM
WAERS LIKE T014-WAERS, "currency JAM
SORT_GSB, "TONYC
RAST1 TYPE P,
RAST2 TYPE P,
RAST3 TYPE P,
RAST4 TYPE P,
RAST5 TYPE P,
RAST6 TYPE P,
RAST7 TYPE P,
T_IND,
END OF GTAB.
DATA HOLD_NAME(40).
DATA HOLD_BUKRS LIKE T001-BUKRS. "tonyc
DATA GOOD_SUPER_REP. "tonyc
DATA: HOLD_REP LIKE KNA1-KUNNR, "tonyc
SUPER_NAME LIKE KNA1-NAME1, "tonyc
REP_NAME LIKE KNA1-NAME1. "tonyc
DATA NAME_LENGTH(2) TYPE C. "tonyc
DATA BACKSLASH(3) VALUE ' / '. "tonyc
DATA REPS_INFO(70) TYPE C. "tonyc
DATA REPORT_TYPE(12) TYPE C.
DATA: C_CREDIT_ABTNR LIKE KNVK-ABTNR. "dept 003 = credit
DATA Z_HOLD_LIMIT(22) TYPE N. "tonyc issue#2216
DATA Z_DESCRIPTION(18). "tonyc issue#2216
DATA WRITE_TOTAL.
DATA HOLD_KLIMK LIKE KNKK-KLIMK.
DATA HOLD_KLIMK2(22) TYPE C.
DATA HOLD-CTLPC LIKE KNKK-CTLPC.
DATA HOLD-CTLPC-TEXT LIKE T691T-RTEXT.
DATA HOLD_ZTERM LIKE KNVV-ZTERM.
DATA TOTAL_RAST7 TYPE P.
DATA TOTAL_RAST2 TYPE P.
DATA TOTAL_RAST3 TYPE P.
DATA TOTAL_RAST4 TYPE P.
DATA TOTAL_RAST5 TYPE P.
DATA TOTAL_RAST6 TYPE P.
DATA TOTAL_RAST1 TYPE P.
DATA HOLD_BUKRS2 LIKE T001-BUKRS.
DATA HOLD_KKBER LIKE BSID-KKBER.
DATA HOLD_KKBER_DESC LIKE T014T-KKBTX.
DATA HOLD_KKBER_DESC2 LIKE T014T-KKBTX.
DATA HOLD_KUNNR2 LIKE KNA1-KUNNR.
DATA L_FIRST_DAY_OF_FISCAL LIKE SY-DATUM. "tonyc issue #3047
DATA: STAB TYPE TOT_TAB WITH HEADER LINE, "DEVK939546
RTOT TYPE TOT_TAB WITH HEADER LINE, "DEVK939546
STOT TYPE TOT_TAB WITH HEADER LINE, "DEVK939546
OP,
MAXMANDT LIKE DD_STIDA,
MAXMANST TYPE P,
SUMKLIMB TYPE P,
SUMVLIBB TYPE P,
VERZUG TYPE P,
OBAD TYPE P,
BLOCK_CNT TYPE P,
INTENS,
ONEBYTE(1) TYPE C,
TAGE1A LIKE RFPDO1-ALLGFAEL,
TAGE2A LIKE RFPDO1-ALLGFAEL,
TAGE3A LIKE RFPDO1-ALLGFAEL,
HOLD_KUNNR LIKE KNA1-KUNNR, "tonyc
HOLD_SUPER LIKE KNA1-KUNNR, "tonyc
HOLD_REP2 LIKE KNA1-KUNNR, "tonyc
SUPER_REP LIKE KNA1-KUNNR, "tonyc
TEMP_TELF1 LIKE KNA1-TELF1, "JAM
IT_T014 LIKE T014 OCCURS 0 WITH HEADER LINE, "JAM
G_KLIMK_TXT LIKE GTAB-KLIMK_TXT, "JAM
G_WAERS LIKE GTAB-WAERS, "JAM
G_CONT_NAME(50) TYPE C. "JA
DATA FILL_REP_INFO.
BC SUNILP 05/14/2007
DATA: BEGIN OF ITAB_VBRP OCCURS 0.
INCLUDE STRUCTURE VBRP.
DATA: END OF ITAB_VBRP.
DATA: T_PERC TYPE F,
SUM_NETWR LIKE VBRP-NETWR.
*DATA: GTAB_LINES LIKE GTAB OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF GTAB_LINES OCCURS 0.
INCLUDE STRUCTURE GTAB.
DATA: IND(1),
OBAD TYPE P.
DATA: END OF GTAB_LINES.
DATA: BEGIN OF ITAB_VBRP1 OCCURS 0,
VBELN LIKE VBRP-VBELN,
NETWR LIKE VBRP-NETWR,
ZZMREP LIKE VBRP-ZZMREP, "Super Rep
ZZLREP LIKE VBRP-ZZLREP, "Rep
PERC TYPE F,
END OF ITAB_VBRP1.
EC SUNILP 05/14/2007
BEGIN_OF_BLOCK 2.
PARAMETERS: REGIO LIKE KNA1-REGIO.
PARAMETERS: CONSOL AS CHECKBOX. "TONYC
PARAMETERS: P_KKBER AS CHECKBOX, "TONYC
P_CONV AS CHECKBOX. "tonyc issue #3047
PARAMETERS: SUMMEN LIKE RFPDO1-ALLGSUMM,
TAGE1 LIKE RFPDO1-ALLGFAEL DEFAULT '30',
TAGE2 LIKE RFPDO1-ALLGFAEL DEFAULT '60',
TAGE3 LIKE RFPDO1-ALLGFAEL DEFAULT '90',
TAGE4 LIKE RFPDO1-ALLGFAEL DEFAULT '120'.
END_OF_BLOCK 2.
BEGIN_OF_BLOCK 3.
SELECT-OPTIONS: P_SUPREP FOR KNVP-KUNNR, "Super REP "DEVK939546
P_REP FOR KNVP-KUNNR, "SALES REP "DEVK939546
P_VKORG FOR TVKO-VKORG, "TONYC ISSUE 4743
P_LOTKZ FOR BKPF-LOTKZ. "TONYC ISSUE 4743
END_OF_BLOCK 3.
INITIALIZATION. "JAM
PERFORM LOAD_T014. "JAM
refresh dd_augdt.
clear dd_augdt.
dd_augdt-option = 'EQ'.
dd_augdt-sign = 'I'.
dd_augdt-low = ' '.
append dd_augdt.
AT SELECTION-SCREEN.
IF CONSOL = 'X'.
IF NOT P_SUPREP[] IS INITIAL. "DEVK939546
MESSAGE E999 WITH 'Consolidated report not allowed w/ Super Rep'.
ENDIF.
ENDIF.
CHECK IF THE REP INFO IS ADDED OR NOT - VS
IF NOT P_SUPREP IS INITIAL OR"TONY ISSUE 4743
NOT P_REP IS INITIAL."TONY ISSUE 4743
FILL_REP_INFO = 'X'."TONY ISSUE 4743
ENDIF."TONY ISSUE 4743
START-OF-SELECTION.
get_frame_title 2.
add function module to track usage JD 10/13/98 *****
CALL FUNCTION 'Z_RUN_LOG'
EXCEPTIONS
OTHERS = 1.
*IF NOT P_SUPREP IS INITIAL AND NOT P_REP IS INITIAL.
P_SUPREP = ' '.
*ENDIF.
GET KNA1 FIELDS LAND1 REGIO KUNNR NAME1 NAME2 ORT01 TELF1. "JAM
new-page.
skip.
TEMP_TELF1 = KNA1-TELF1.
MAXMANDT = '19000101'.
MAXMANST = 0.
SUMVLIBB = 0.
PERFORM GET_CUST_CONTACT. "JAM
Check sales rep- NES071797
Get any valid record and exit.
IF NOT p_suprep[] IS INITIAL. "DEVK939546 "TONY ISSUE 4743 start
good_super_rep = ' '.
SELECT kunn2 INTO super_rep FROM knvp UP TO 1 ROWS
WHERE
kunnr = kna1-kunnr AND
parvw = 'ZS' AND
kunn2 IN p_suprep.
EXIT.
ENDSELECT.
IF sy-subrc = 0.
good_super_rep = 'X'.
gtab-super = super_rep.
super_rep = ' '.
ENDIF.
CHECK good_super_rep = 'X'.
SELECT kunn2 INTO gtab-rep FROM knvp UP TO 1 ROWS
WHERE
kunnr = kna1-kunnr AND
parvw = 'ZR' AND
kunn2 IN p_rep.
EXIT.
ENDSELECT.
CHECK sy-subrc = 0.
ELSEIF NOT p_rep[] IS INITIAL. "DEVK939546
SELECT kunn2 INTO gtab-rep FROM knvp UP TO 1 ROWS
WHERE
kunnr = kna1-kunnr AND
parvw = 'ZR' AND
kunn2 IN p_rep.
EXIT.
ENDSELECT.
CHECK sy-subrc = 0.
ENDIF. "TONY ISSUE 4743 end
GET KNB1 FIELDS BUKRS VLIBB ZTERM. "tonyc #2500
GTAB-BUKRS = KNB1-BUKRS.
GTAB-ZTERM = KNB1-ZTERM.
SUMVLIBB = SUMVLIBB + KNB1-VLIBB.
GET KNB5.
IF KNB5-MADAT > MAXMANDT.
MAXMANDT = KNB5-MADAT.
ENDIF.
IF KNB5-MAHNS > MAXMANST.
MAXMANST = KNB5-MAHNS.
ENDIF.
SUMKLIMB = SUMKLIMB + KLIMB.
GET BSID.
CHECK BSID-BSTAT = SPACE.
field was intended for Business Area, changed to use Currency
GTAB-GSBER = BSID-WAERS.
IF P_KKBER = 'X'. "TONYC ISSUE #2500
IF BSID-KKBER = ' '.
GTAB-KKBER = BSID-BUKRS.
ELSE.
GTAB-KKBER = BSID-KKBER. "TONYC ISSUE #2500
ENDIF.
ENDIF. "TONYC ISSUE #2500
SELECT SINGLE * FROM BKPF "TONY ISSUE 4743
WHERE BUKRS = BSID-BUKRS "TONY ISSUE 4743
AND BELNR = BSID-BELNR "TONY ISSUE 4743
AND GJAHR = BSID-GJAHR. "TONY ISSUE 4743
BC SUNILP 05/14/2007
IF BKPF-XREF2_HD IS NOT INITIAL.
CHECK BKPF-XREF2_HD IN P_SUPREP. "TONY ISSUE 4743
ELSE.
IF P_REP[] IS INITIAL.
REFRESH: ITAB_VBRP, ITAB_VBRP1.
IF NOT BKPF-XBLNR IS INITIAL.
SELECT * FROM VBRP INTO ITAB_VBRP WHERE VBELN = BKPF-XBLNR.
APPEND ITAB_VBRP. CLEAR ITAB_VBRP.
ENDSELECT.
CHECK ITAB_VBRP[] IS NOT INITIAL.
CLEAR: SUM_NETWR.
LOOP AT ITAB_VBRP.
CHECK ITAB_VBRP-ZZMREP IN P_SUPREP.
CHECK ITAB_VBRP-ZZLREP IN P_REP.
MOVE-CORRESPONDING ITAB_VBRP TO ITAB_VBRP1.
COLLECT: ITAB_VBRP1.
SUM_NETWR = SUM_NETWR + ITAB_VBRP-NETWR.
CLEAR ITAB_VBRP.
ENDLOOP.
CHECK ITAB_VBRP1[] IS NOT INITIAL.
LOOP AT ITAB_VBRP1.
CLEAR: T_PERC.
T_PERC = ( ITAB_VBRP1-NETWR / SUM_NETWR ).
ITAB_VBRP1-PERC = T_PERC.
MODIFY ITAB_VBRP1 INDEX SY-TABIX TRANSPORTING PERC.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
EC SUNILP 05/14/2007
IF FILL_REP_INFO = 'X'.
GTAB-SUPER = BKPF-XREF2_HD. "TONY ISSUE 4743 "MOVE THE CONTENTS OF XREF2_HD TO GTAB INTERNAL TABLE - VS
ENDIF.
BC SUNILP 05/14/2007
IF BKPF-XREF1_HD IS NOT INITIAL.
CHECK BKPF-XREF1_HD IN P_REP. "TONY ISSUE 4743 " ELSE MOVE THE CONTENTS OF - VS
ELSE.
REFRESH: ITAB_VBRP, ITAB_VBRP1.
IF NOT BKPF-XBLNR IS INITIAL.
SELECT * FROM VBRP INTO ITAB_VBRP WHERE VBELN = BKPF-XBLNR.
APPEND ITAB_VBRP. CLEAR ITAB_VBRP.
ENDSELECT.
CHECK ITAB_VBRP[] IS NOT INITIAL.
CLEAR: SUM_NETWR.
LOOP AT ITAB_VBRP.
CHECK ITAB_VBRP-ZZMREP IN P_SUPREP.
CHECK ITAB_VBRP-ZZLREP IN P_REP.
MOVE-CORRESPONDING ITAB_VBRP TO ITAB_VBRP1.
COLLECT: ITAB_VBRP1.
SUM_NETWR = SUM_NETWR + ITAB_VBRP-NETWR.
CLEAR ITAB_VBRP.
ENDLOOP.
CHECK ITAB_VBRP1[] IS NOT INITIAL.
LOOP AT ITAB_VBRP1.
CLEAR: T_PERC.
T_PERC = ( ITAB_VBRP1-NETWR / SUM_NETWR ).
ITAB_VBRP1-PERC = T_PERC.
MODIFY ITAB_VBRP1 INDEX SY-TABIX TRANSPORTING PERC.
ENDLOOP.
ENDIF.
ENDIF.
EC SUNILP 05/14/2007
IF FILL_REP_INFO = 'X'.
GTAB-REP = BKPF-XREF1_HD. "TONY ISSUE 4743
ENDIF.
CHECK BKPF-LOTKZ IN P_LOTKZ. "TONY ISSUE 4743
CHECK BKPF-BRNCH IN P_VKORG. "TONY ISSUE 4743
SELECT SINGLE FILKD INTO GTAB-FILKD FROM BSEG
WHERE BUKRS = BSID-BUKRS
AND BELNR = BSID-BELNR
AND GJAHR = BSID-GJAHR
AND BUZEI = BSID-BUZEI.
gtab-gsber = bsid-gsber.
get rep info for each bsid record
IF NOT P_SUPREP IS INITIAL. "tonyc
SELECT KUNNR FROM VBPA INTO HOLD_REP UP TO 1 ROWS "tonyc
WHERE VBELN = BSID-VBELN "tonyc
AND PARVW = 'ZR'. "tonyc
ENDSELECT. "tonyc
IF NOT P_REP IS INITIAL. "tonyc
CHECK HOLD_REP = P_REP. "tonyc
ENDIF. "tonyc
GTAB-REP = HOLD_REP. "tonyc
HOLD_REP = ' '. "tonyc
ENDIF. "tonyc
PERFORM GET_KNKK_INFO. "JAM
GTAB-KLIMK_TXT = G_KLIMK_TXT.
GTAB-WAERS = G_WAERS.
GTAB-LAND1 = KNA1-LAND1.
GTAB-REGIO = KNA1-REGIO.
GTAB-KUNNR = KNA1-KUNNR.
GTAB-NAME1 = KNA1-NAME1.
GTAB-NAME2 = KNA1-NAME2.
GTAB-ORT01 = KNA1-ORT01.
*if there is no phone number for the contact, pull the phone
*number from the sold-to
IF KNVK-TELF1 = ' '.
GTAB-TELF1 = TEMP_TELF1.
ELSE.
GTAB-TELF1 = KNVK-TELF1. "JAM
ENDIF.
GTAB-CONT_NAME1 = KNVK-NAME1.
GTAB-NAMEV = KNVK-NAMEV.
verzug = bsega-netdt - dd_stida.
VERZUG = DD_STIDA - BSEGA-NETDT. "days past due calculation
OP = 'X'.
GTAB-RAST2 = GTAB-RAST3 = GTAB-RAST4 = 0.
GTAB-RAST5 = GTAB-RAST6 = OBAD = GTAB-RAST7 = 0.
IF VERZUG LE 0. "future due
GTAB-RAST1 = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE1. "past due 1 to tage1 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST2 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE2. "past due tage1 to tage2 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST3 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE3. "past due tage2 to tage3 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST4 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE4. "past due tage3 to tage4 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST5 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG GT TAGE4. "past due > tage4 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST6 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
GTAB-RAST7 = GTAB-RAST1 - OBAD.
stab = gtab.
MOVE-CORRESPONDING GTAB TO STAB.
BC SUNILP 05/15/2007
IF ITAB_VBRP1[] IS NOT INITIAL.
GTAB-T_IND = 'X'.
LOOP AT ITAB_VBRP1.
MOVE-CORRESPONDING GTAB TO GTAB_LINES.
GTAB_LINES-SORT_GSB = '1'.
GTAB_LINES-SUPER = ITAB_VBRP1-ZZMREP.
GTAB_LINES-REP = ITAB_VBRP1-ZZLREP.
GTAB_LINES-RAST1 = GTAB_LINES-RAST1 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST2 = GTAB_LINES-RAST2 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST3 = GTAB_LINES-RAST3 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST4 = GTAB_LINES-RAST4 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST5 = GTAB_LINES-RAST5 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST6 = GTAB_LINES-RAST6 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST7 = GTAB_LINES-RAST7 * ITAB_VBRP1-PERC.
GTAB_LINES-OBAD = GTAB_LINES-OBAD * ITAB_VBRP1-PERC.
COLLECT: GTAB_LINES.
ENDLOOP.
ELSE.
MOVE-CORRESPONDING GTAB TO GTAB_LINES.
GTAB_LINES-T_IND = 'X'.
GTAB_LINES-SORT_GSB = '1'.
IF GTAB_LINES-SUPER IN P_SUPREP OR GTAB_LINES-REP IN P_REP.
COLLECT: GTAB_LINES.
ENDIF.
ENDIF.
EC SUNILP 05/15/2007
gtab-sort_gsb = stab-sort_gsb = '0'.
collect: gtab, stab.
gtab-gsber = stab-gsber = '****'.
GTAB-SORT_GSB = '1'.
IF REGIO = SPACE OR REGIO = GTAB-REGIO.
IF GTAB_LINES-SUPER IN P_SUPREP OR GTAB_LINES-REP IN P_REP.
COLLECT: GTAB, STAB.
ENDIF.
ENDIF.
END-OF-SELECTION.
TAGE1A = TAGE1 + 1.
TAGE2A = TAGE2 + 1.
TAGE3A = TAGE3 + 1.
IF SUMMEN = ' '.
sort gtab by bukrs land1 regio kunnr gsber sort_gsb.
sort gtab by bukrs land1 regio name1 kunnr gsber sort_gsb. "JAM
IF CONSOL = 'X'.
SORT GTAB BY LAND1 REGIO NAME1 KUNNR BUKRS KKBER GSBER SORT_GSB.
"TONYC
REPORT_TYPE = 'consolidated'.
ELSEIF NOT P_SUPREP[] IS INITIAL. "DEVK939546
SORT GTAB
BY SUPER REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
BC SUNILP 05/15/2007
SORT GTAB_LINES
BY SUPER REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
EC SUNILP 05/15/2007
REPORT_TYPE = 'super rep'.
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
ELSEIF NOT P_REP[] IS INITIAL. "DEVK939546
SORT GTAB "DEVK939546
BY REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
"DEVK939546
BC SUNILP 05/15/2007
SORT GTAB_LINES
BY REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
EC SUNILP 05/15/2007
REPORT_TYPE = 'rep'. "DEVK939546
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
ELSE.
SORT GTAB BY BUKRS KKBER LAND1 REGIO NAME1 KUNNR GSBER SORT_GSB.
BC SUNILP 05/15/2007
SORT GTAB_LINES BY BUKRS KKBER LAND1 REGIO NAME1 KUNNR GSBER SORT_GSB.
EC SUNILP 05/15/2007
REPORT_TYPE = 'regular'.
ENDIF.
BC SUNILP 05/15/2007
DELETE ADJACENT DUPLICATES FROM GTAB COMPARING BUKRS NAME1.
LOOP AT GTAB_LINES.
IF P_REP[] IS INITIAL.
IF GTAB_LINES-SUPER NOT IN P_SUPREP.
DELETE GTAB_LINES.
ENDIF.
ELSE.
IF GTAB_LINES-SUPER NOT IN P_SUPREP OR GTAB_LINES-REP NOT IN P_REP.
DELETE GTAB_LINES.
ENDIF.
ENDIF.
ENDLOOP.
LOOP AT GTAB.
READ TABLE GTAB_LINES WITH KEY BUKRS = GTAB-BUKRS
NAME1 = GTAB-NAME1.
IF SY-SUBRC NE '0'.
DELETE GTAB.
ENDIF.
ENDLOOP.
EC SUNILP 05/15/2007
LOOP AT GTAB.
MOVE GTAB-BUKRS TO T001-BUKRS. READ TABLE T001.
RESERVE 5 LINES.
CASE REPORT_TYPE.
WHEN 'regular'.
IF HOLD_BUKRS <> GTAB-BUKRS.
IF SY-TABIX > 1. "TONYC
NEW-PAGE. SKIP. "TONYC
ENDIF. "TONYC
ENDIF.
PERFORM WRITE_CUST_INFO. "TONYC
PERFORM WRITE_DETAIL.
hold_bukrs = gtab-bukrs. "tonyc
WHEN 'consolidated'.
IF HOLD_KUNNR <> GTAB-KUNNR. "TONYC
PERFORM WRITE_CUST_INFO. "TONYC
ENDIF. "TONYC
HOLD_KUNNR = GTAB-KUNNR. "TONYC
PERFORM WRITE_DETAIL.
WHEN 'super rep'.
IF GTAB-T_IND NE 'X'.
BC SUNILP 05/22/2007
READ TABLE GTAB_LINES WITH KEY BUKRS = GTAB-BUKRS
NAME1 = GTAB-NAME1.
EC SUNILP 05/22/2007
IF ( HOLD_SUPER <> GTAB_LINES-SUPER ) OR
( HOLD_REP2 <> GTAB_LINES-REP ).
NEW-PAGE.
PERFORM GET_AND_WRITE_SUPERINFO.
ENDIF.
HOLD_REP2 = GTAB_LINES-REP.
HOLD_SUPER = GTAB_LINES-SUPER.
IF HOLD_KUNNR <> GTAB-KUNNR. "TONYC
WRITE :/. "TONYC
ULINE. "TONYC
PERFORM WRITE_CUST_INFO. "TONYC
ENDIF. "TONYC
HOLD_KUNNR = GTAB-KUNNR. "TONYC
PERFORM WRITE_DETAIL. "TONYC
AT END OF REP. "DEVK939546
SKIP. "DEVK939546
RESERVE 7 LINES. "DEVK939546
FORMAT COLOR COL_TOTAL INTENSIFIED. "DEVK939546
WRITE: / 'Summary for Rep:', "DEVK939546
GTAB-REP, '/', REP_NAME, 132 ONEBYTE."DEVK939546
PERFORM WRITE_TOTS TABLES RTOT. "DEVK939546
REFRESH RTOT. "DEVK939546
ENDAT. "DEVK939546
AT END OF SUPER. "DEVK939546
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
NEW-PAGE. SKIP. "DEVK939546
FORMAT COLOR COL_TOTAL INTENSIFIED. "DEVK939546
WRITE: / 'Summary for Super Rep:', "DEVK939546
GTAB-SUPER, '/', SUPER_NAME, 132 ONEBYTE."DEVK939546
PERFORM WRITE_TOTS TABLES STOT. "DEVK939546
REFRESH STOT. "DEVK939546
ENDAT. "DEVK939546
ELSE.
LOOP AT GTAB_LINES WHERE BUKRS = GTAB-BUKRS
AND NAME1 = GTAB-NAME1.
IF ( HOLD_SUPER <> GTAB_LINES-SUPER ) OR
( HOLD_REP2 <> GTAB_LINES-REP ).
NEW-PAGE.
PERFORM GET_AND_WRITE_SUPERINFO.
ENDIF.
HOLD_REP2 = GTAB_LINES-REP.
HOLD_SUPER = GTAB_LINES-SUPER.
IF HOLD_KUNNR <> GTAB_LINES-KUNNR.
WRITE :/.
ULINE.
PERFORM WRITE_CUST_INFO.
ENDIF.
HOLD_KUNNR = GTAB_LINES-KUNNR.
PERFORM WRITE_DETAIL.
AT END OF REP.
SKIP.
RESERVE 7 LINES.
FORMAT COLOR COL_TOTAL INTENSIFIED.
WRITE: / 'Summary for Rep:',
GTAB_LINES-REP, '/', REP_NAME, 132 ONEBYTE.
PERFORM WRITE_TOTS TABLES RTOT.
REFRESH RTOT.
ENDAT.
AT END OF SUPER.
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
NEW-PAGE. SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED.
WRITE: / 'Summary for Super Rep:',
GTAB_LINES-SUPER, '/', SUPER_NAME, 132 ONEBYTE.
PERFORM WRITE_TOTS TABLES STOT.
REFRESH STOT.
ENDAT.
ENDLOOP.
ENDIF.
WHEN 'rep'. "DEVK939546
LOOP AT GTAB_LINES WHERE BUKRS = GTAB-BUKRS
AND NAME1 = GTAB-NAME1.
IF HOLD_REP2 <> GTAB_LINES-REP. "DEVK939546
NEW-PAGE. "DEVK939546
PERFORM GET_AND_WRITE_REPINFO. "DEVK939546
ENDIF. "DEVK939546
HOLD_REP2 = GTAB_LINES-REP. "DEVK939546
IF HOLD_KUNNR <> GTAB_LINES-KUNNR. "DEVK939546
WRITE :/. "DEVK939546
ULINE. "DEVK939546
PERFORM WRITE_CUST_INFO. "DEVK939546
ENDIF. "DEVK939546
HOLD_KUNNR = GTAB_LINES-KUNNR. "DEVK939546
PERFORM WRITE_DETAIL. "DEVK939546
AT END OF REP. "DEVK939546
SKIP. "DEVK939546
RESERVE 7 LINES. "DEVK939546
FORMAT COLOR COL_TOTAL INTENSIFIED. "DEVK939546
WRITE: / 'Summary for Rep:', "DEVK939546
GTAB_LINES-REP, '/', REP_NAME, 132 ONEBYTE."DEVK939546
PERFORM WRITE_TOTS TABLES RTOT. "DEVK939546
REFRESH RTOT. "DEVK939546
ENDAT. "DEVK939546
ENDLOOP.
ENDCASE.
ENDLOOP.
ENDIF.
OP = ' '.
REFRESH GTAB.
IF NOT REPORT_TYPE = 'super rep'.
ULINE.
ENDIF.
SKIP 1.
IF SUMMEN = ' '. "if 'output totals only' bypass new-page
NEW-PAGE. SKIP.
ENDIF.
WRITE: /25 TEXT-030, 132 ONEBYTE, /25 TEXT-031, 132 ONEBYTE.
PERFORM WRITE_TOTS TABLES STAB. "DEVK939546
TOP-OF-PAGE.
INTENS = SPACE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE: / SY-VLINE, 1 TEXT-001, DD_STIDA, 75 TEXT-051, 132 SY-VLINE.
ULINE.
WRITE: / SY-VLINE, 13 SY-VLINE, 30 SY-VLINE,
47 SY-VLINE, 58 TEXT-003, 81 SY-VLINE,
92 TEXT-003, 115 SY-VLINE, 118 TEXT-003, 132 SY-VLINE,
/ SY-VLINE, 02 TEXT-004, 13 SY-VLINE, TEXT-002,
30 SY-VLINE, 32 TEXT-018, 47 SY-VLINE,
50 '1', 54 TEXT-040, 57 TAGE1, 64 SY-VLINE, " 65 tage2,
67 TAGE1A, 72 TEXT-040, 75 TAGE2,
81 SY-VLINE, 83 TAGE2A, 89 TEXT-040, 91 TAGE3, 98 SY-VLINE,
101 TAGE3A, 107 TEXT-040, 110 TAGE4, 115 SY-VLINE,
117 TAGE4, 123 TEXT-017, 132 SY-VLINE.
ULINE.
SKIP 1.
SUMMARY.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
FORM write_tots *
--> PTAB *
FORM WRITE_TOTS TABLES PTAB TYPE TOT_TAB. "DEVK939546
CLEAR INTENS. "DEVK939546
FORMAT COLOR COL_HEADING INTENSIFIED OFF. "DEVK939546
IF P_CONV = 'X'. "tonyc issue #3047 begin
WRITE /4 TEXT-101.
WRITE: /4 TEXT-102,
50 TEXT-100.
ENDIF. "tonyc issue #3047 end
ULINE. "DEVK939546
SORT PTAB BY BUKRS GSBER. "DEVK939546
LOOP AT PTAB. "DEVK939546
IF SY-TABIX > 1.
WRITE_TOTAL = 'X'.
ENDIF.
MOVE PTAB-BUKRS TO T001-BUKRS. READ TABLE T001. "DEVK939546
MOVE PTAB-GSBER TO T001-WAERS. "DEVK939546
IF P_CONV = 'X'. "tonyc issue #3047 begin
PERFORM CONVERT_VALUES USING STAB-RAST1
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST2
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST3
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST4
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST5
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST6
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST7
STAB-GSBER.
ENDIF. "TOnyc issue #3047 end
MOVE-CORRESPONDING PTAB TO STAB.
COLLECT STAB.
IF P_KKBER = 'X'. "TONYC ISSUE #2500
CLEAR HOLD_KKBER_DESC2.
SELECT SINGLE KKBTX INTO HOLD_KKBER_DESC2 FROM T014T
WHERE KKBER = STAB-KKBER AND
SPRAS = 'E'.
IF SY-SUBRC <> '0'.
HOLD_KKBER_DESC2 = 'Undetermined'.
ENDIF.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: 6 STAB-GSBER, HOLD_KKBER_DESC2, SY-VLINE.
ULINE.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
IF P_CONV = 'X'. "tonyc issue #3047 begin
T001-WAERS = 'USD'.
ENDIF. "tonyc issue #3047 end
WRITE: 13 STAB-RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE.
HOLD_BUKRS2 = STAB-BUKRS. "TONYC ISSUE #2500
ULINE.
FORMAT COLOR OFF.
TOTAL_RAST1 = STAB-RAST1 + TOTAL_RAST1.
TOTAL_RAST2 = STAB-RAST2 + TOTAL_RAST2.
TOTAL_RAST3 = STAB-RAST3 + TOTAL_RAST3.
TOTAL_RAST4 = STAB-RAST4 + TOTAL_RAST4.
TOTAL_RAST5 = STAB-RAST5 + TOTAL_RAST5.
TOTAL_RAST6 = STAB-RAST6 + TOTAL_RAST6.
TOTAL_RAST7 = STAB-RAST7 + TOTAL_RAST7.
ELSE.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF. "DEVK939546
IF INTENS = SPACE. "DEVK939546
FORMAT COLOR COL_NORMAL INTENSIFIED OFF. "DEVK939546
INTENS = 'X'. "DEVK939546
ELSE. "DEVK939546
FORMAT COLOR COL_NORMAL INTENSIFIED ON. "DEVK939546
INTENS = SPACE. "DEVK939546
ENDIF. "DEVK939546
WRITE: / SY-VLINE, PTAB-BUKRS, PTAB-GSBER, SY-VLINE, "DEVK939546
(14) PTAB-RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE."DEVK939546
TOTAL_RAST1 = STAB-RAST1 + TOTAL_RAST1.
TOTAL_RAST2 = STAB-RAST2 + TOTAL_RAST2.
TOTAL_RAST3 = STAB-RAST3 + TOTAL_RAST3.
TOTAL_RAST4 = STAB-RAST4 + TOTAL_RAST4.
TOTAL_RAST5 = STAB-RAST5 + TOTAL_RAST5.
TOTAL_RAST6 = STAB-RAST6 + TOTAL_RAST6.
TOTAL_RAST7 = STAB-RAST7 + TOTAL_RAST7.
ENDIF.
ENDLOOP. "DEVK939546
ULINE. "DEVK939546
IF P_KKBER = 'X'. "TONYC ISSUE #2500
IF P_CONV = 'X'. "tonyc issue #3047 begin
FORMAT COLOR OFF.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: SY-VLINE,
6 'TOTAL ', SY-VLINE.
ULINE.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: 13 TOTAL_RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE.
ULINE.
ENDIF. "tonyc issue #3047 end
ELSE.
IF P_CONV = 'X'.
FORMAT COLOR OFF.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: SY-VLINE,
6 'TOTAL ', SY-VLINE.
ULINE.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: 13 TOTAL_RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE.
ULINE.
ENDIF.
ENDIF.
SKIP 1. "DEVK939546
ENDFORM. "DEVK939546
*& Form GET_KNKK_INFO
text
--> p1 text
<-- p2 text
FORM GET_KNKK_INFO.
CLEAR: G_WAERS,
G_KLIMK_TXT,
KNKK-KLIMK.
get credit control area (KKBER) for comp code (BUKRS)
SELECT SINGLE KLIMK
INTO KNKK-KLIMK
FROM KNKK
WHERE KUNNR = KNA1-KUNNR AND
KKBER = T001-KKBER.
IF SY-SUBRC = 0.
get currency for cred ctrl area
CLEAR IT_T014.
READ TABLE IT_T014 WITH KEY KKBER = T001-KKBER BINARY SEARCH.
G_WAERS = IT_T014-WAERS.
WRITE KNKK-KLIMK TO G_KLIMK_TXT CURRENCY G_WAERS.
ENDIF.
ENDFORM. " GET_KNKK_INFO
*& Form SELECT_KNKK
text
-->P_KKBER Credit Limit Controlling AreaThis is a FI Aging report.
-
Performance Issue with VL06O report
Hi,
We are having performance issue with VL06O report, when run with forwarding agent. It is taking about an hour with forwarding agent. The issue is with VBPA table and we found one OSS note, but it is for old versions. ours is ECC 5.0. Can anybody know the solution? If you guys need more information, please ask me.
Thanks,
SuryaSreedhar,
Thanks for you quick response. Indexes were not created for VBPA table. basis people tested by creating indexes and gave a report that it is taking more time with indexes than regular query optimizer. this is happening in the funtion forward_ag_selection.
select vbeln lifnr from vbpa
appending corresponding fields of table lt_select
where vbeln in ct_vbeln
and posnr eq posnr_initial
and parvw eq 'SP'
and lifnr in it_spdnr.
I don't see any issue with this query. I give more info later -
Using member sorting and grouping with two reports sharing rows
Hi!
I have a problem with one report and I need some help or advise here.
I have two dimensions with dynamic expansion in rows (PRODUCT, MATERIAL), and I use the option Member Sorting and Grouping at Member selector to obtain the total amount of PRODUCT group by PARENTH1:
PRODUCT MATERIAL AMOUNT
TOTAL PROD_A-X 100
PROD_A_A MAT1 22
PROD_A_B MAT1 50
PROD_A_A MAT2 28
TOTAL PROD_B-X 120
PROD_B_A MAT1 30
PROD_B_A MAT2 50
PROD_B_B MAT2 40
This works fine if I only have one report, but I need to create another one sharing the row and page axis with the Default Report, when I do that the option Member Sorting and Grouping doesn't work. I really need to have two reports with shared rows and also the summation by PARENTH1, how can I do that?
Thank you very muchHi!
I have a problem with one report and I need some help or advise here.
I have two dimensions with dynamic expansion in rows (PRODUCT, MATERIAL), and I use the option Member Sorting and Grouping at Member selector to obtain the total amount of PRODUCT group by PARENTH1:
PRODUCT MATERIAL AMOUNT
TOTAL PROD_A-X 100
PROD_A_A MAT1 22
PROD_A_B MAT1 50
PROD_A_A MAT2 28
TOTAL PROD_B-X 120
PROD_B_A MAT1 30
PROD_B_A MAT2 50
PROD_B_B MAT2 40
This works fine if I only have one report, but I need to create another one sharing the row and page axis with the Default Report, when I do that the option Member Sorting and Grouping doesn't work. I really need to have two reports with shared rows and also the summation by PARENTH1, how can I do that?
Thank you very much -
Sales orders Dispatch Actual No of pipes do not match with R3 report
Dear Gurus,
Looking Ur assistance for an issue.
Issue: For some of the sales orders Dispatch Actual No of pipes do not match with R3 report. Actual No of Pipes matches with LIKP table values in R3. Query needs to be modified to restrict records as per logic in WGSRLDES report/program.
Can U help me in this Regard.
Ur Responses are most appreciated.Hey Pathak,
The problem is, BI report is matching with the datails with R/3 LIKP table. But the business user is using Report WGSRLDES report/program, where the data is missmatching.
Hope U got my Point. -
Print layout different with crystal report 2008 runtime
Hi,
I have reports which I print on a pre printed stationary. With Crystal report 11.5 run time it works fine.
Now I am using Crystal Report 2008 run time and with this I found that layout on the print is different than the actual layout in the design.
The print with CR 2008 run time is not exactly matching with the pre printed stationary. Whereas it is working fine with the 11.5 run time.
Can anyone please help?
Thanks,
Abhijit Gorhehi,
you can verify the settings
File -> Page Setup
- Printer Options
- Page Options
- Margins
Regards,
Vamsee -
I am creating a Word document with the Report Generation Toolkit, and LabVIEW 8.2.1. In the report I am using a template that has page numbering enabled in the center. When I try to add a text block to the left side footer, it eliminates the page numbering and adds my text on the left side. I found "Set Report Footer Text" and "Word Set Page Numbering" vi's that may be the clue to this. When I use these two vi's I either get Page 1 of 456789-001 on the left side, or if I reverse the order I get only 456789-001(text) in the left side with nothing in the center. What I would like to achieve is 456789-001(text) on the left footer, and Page 1 of 2 in the center. Is this possible and if it is, then how can I do it?
Hi SciManStev,
I have attached a vi where you can see how they can be made to work together. You have to design it such that one follows the other. If you don't design it that way, it results in a race condition and only one of them get executed.
Good Luck!
Warm regards,
Karunya R
National Instruments
Applications Engineer
Attachments:
SciMan1.vi 14 KB -
Dear Experts,
There is a certain asset class (Computer) which is not tally to the GL balance. What is the possible reason to check?
I am verifying the GL balance (FBL3N) with asset report (s_alr_87011963). please refer below table.
furniture
Particulars
2014
As per F.01 (BS)
1,098,675.23
As per Report S_ALR_87011963
1,097,045.98
Furniture
1,098,675.23
Difference
(1,629.25)
Please help me to resolve this difference issue.
Thanks in Advance.Thanks for your valuable reply,
i have found two line items in GL balance that are not showing in asset report (which is difference amt Rs. 1629).
The document Type is "AA" of below entries.
1. Vat retention @4% for Rs. 1000/-
asset ac - Dr 1000
Input vat capital Cr -
2. Vat retention @4% for Rs. 629/-
asset ac - Dr 629
Input vat capital Cr -
Report is showing all documents(entries) of Doc type "AA" -
How GET Output to Excel with Oracle9i Report using OC4J
how GET Output to Excel with Oracle9i Report using OC4J.
I FINISHED THE SETPS CONCIDERING THE JSP CODE NEEDED TO GET THE EXCEL OUTPUT ON LOCAL MACHINE.
I NEED TO PUBLISH THIS REPORT THROUGH APPLICATION SERVER.
THE QUESTION IS:
1- HOW TO START AN OC4J INSTANCE FROM ORACLE 9I DS FOR THIS REPORT?
2- WHERE (PATH) TO PUBLISH THE REPORT ON THE APPLICATION SERVER?
3- WHAT IS THE DEFAULT URL TO RUN THIS REPORT AND WHERE TO PUT IT?
4- HOW TO MAKE MAPPING FOR DIRECOTRY PATH TO TRANSLATED AS URL FOR THIS REPORT?
5- IF ANY ONE CAN GIVE ME THE FULL CODE TO RUN AND CALL SIMPLE JSP REPORT TO BE VIED IN INTERNET EXPLORER.
THANK YOUHi,
I can't answer to all your questions, however I can tell you that:
2) The directory where to put the report file is specifiend in a file named
<serverName>.conf
in the sourceDire property
<property name="sourceDir" value="/directory/dove/mettere/i/report"/>
that you can find under ORACLE_HOME/reports/conf
3) The URL is
http://<server IAS address>:<port number>/<jsp file path>/<repName>.jsp?server=<report server name>&userid=<user>/<pwd>@<DB conn string>[&<param>=<valore>[&...]]
5) In IE you have only to set the previous URL in the address bar.
Hope this helps you
Bye
Raffy -
Problem with Crystal reports for Eclipse and Postgres-databases
Hi,
Is there a known problem when using a PostgreSQL-database to create a report with Crystal reports Plugin? When I drag a table, then occurs a error-windows, that the object can't created.
I have found a workaround for solving the problem. After new installing Eclipse Platform Version: 3.4.1 Build id: M20080911-1700 and Crystal reports Plugin 11.8.6.v1371 with JRE 1.6.0_01 the error message allways occurs, when I select a table from a PostgreSQL database (Version 8.2). After restarting eclipse you see the last selected tables in the field explorer and you can drag the table fields in the report. A repeated choice of the same table causes aliases for the table in the field explorer after restarting eclipse.
Error.log:
eclipse.buildId=M20080911-1700
java.version=1.6.0_01
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE Command-line arguments: -os win32 -ws win32 -arch x86
Error
Tue Dec 16 14:03:53 CET 2008
Verursacht durch: java.lang.IllegalArgumentException
com.businessobjects.crystalreports.designer.core.ReportException: java.lang.IllegalArgumentException
at com.businessobjects.crystalreports.designer.core.ExceptionFactory.B(Unknown Source) at com.businessobjects.crystalreports.designer.core.ExceptionFactory.create(Unknown Source) at com.businessobjects.crystalreports.designer.core.elements.data.TableElement.add(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.AddCommand.doCommand(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.C(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.execute(Unknown Source) at com.businessobjects.crystalreports.designer.CoreCommand.execute(Unknown Source) at com.businessobjects.crystalreports.designer.dseintegration.DSEDropHandler.drop(Unknown Source) at org.eclipse.jface.util.DelegatingDropAdapter$3.run(DelegatingDropAdapter.java:211)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.runtime.Platform.run(Platform.java:880)
at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:48)
at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175)
at org.eclipse.jface.util.DelegatingDropAdapter.drop(DelegatingDropAdapter.java:209)
at org.eclipse.swt.dnd.DNDListener.handleEvent(DNDListener.java:90)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1027)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1012)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:770)
at org.eclipse.swt.dnd.DropTarget.Drop(DropTarget.java:455)
at org.eclipse.swt.dnd.DropTarget$3.method6(DropTarget.java:257)
at org.eclipse.swt.internal.ole.win32.COMObject.callback6(COMObject.java:119)
at org.eclipse.swt.internal.ole.win32.COM.DoDragDrop(Native Method) at org.eclipse.swt.dnd.DragSource.drag(DragSource.java:362)
at org.eclipse.swt.dnd.DragSource.access$0(DragSource.java:288)
at org.eclipse.swt.dnd.DragSource$1.handleEvent(DragSource.java:171)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3823)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3422)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2382)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2346)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2198)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:493)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:488)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
Caused by: com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.IllegalArgumentException---- Error code:-2147467259 Error code name:failed at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ag.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.bu.if(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.bu.void(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.a6.for(Unknown Source) at com.crystaldecisions.proxy.remoteagent.u.performDo(Unknown Source)
Best Regards
ArnoldYour issue appears to be a Crystal Reports for Eclipse report designer thing, and not a JRC runtime thing. The JRC runtime does support Type 4 JDBC drivers, but all modern PostgreSQL drivers are Type 4.
The current report designer is more restrictive than the JRC runtime - and PostgreSQL, being not on the supported platforms list, has never been tested with the embedded designer.
Unless there's anybody out there with experience with PostgreSQL and CR4E designer, who would be willing to share their experiences.
Sincerely,
Ted Ueda -
Invalid export DLL or export format" with Crystal Reports 2008 to Excel xls
We are experiencing the same issue as reported in the sticky thread. I answered in that thread, but thought that I woudl open a new thread to keep track of this issue. I can give you the responses to your questions you have requested in that thread:
Server Operating System - MS Windows Server 2003 R2 Enterprise Edition SP2
Version of the .NET Framework - MS .NET Framework 3.5 SP1
How did you deploy? - Installed CR 2008 SP1 runtime with msi package
If you deployed with CRRuntime_12_0_mlb.msi - what was the date of the file and its size? CRRuntime_12_1_mlb.msi dated Sept. 16, 2008 12:55:00 PM, size: 56,717,824 bytes
What is the file version of crpe32.dll on your server? You'll find this in the C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 directory - File was created 9/13/08 11:21AM, 9451KB File Version: 12.1.0.882
How many libpng10.dll files are on your system? List all instances. - 1 instance is on the system located in C;\Program Files\Business Objects\Business Objects Enterprise 12.0\win32_x86 directory. It is dated 9/13/08 8:52:26AM 132KB version 1.0.30.1
Any additional comments - We have tried to export to PDF and this works successfully. However, we can not export to xls or rft formats.
CRXF_XLS.dll is 905KB 9/13/08 9:38AM Version 12.1.0.882
CRXF_RTF.dll is 509KB 9/13/08 9:35AM Version 12.1.0.882
We also have the CR XIR2 server runtime installed side by side on the server as we migrate from CR 2008 to CR XIR2 SP4 ( where this function does work currently).
Please let me know if you need anything additional.
Phil
"Invalid export DLL or export format" with Crystal Reports 2008
Posted: Sep 27, 2008 12:36 AM E-mail this message Reply
I've included this sticky because we are seeing many posts in this forum regarding the error Invalid export DLL or export format when exporting to Excel and RTF in .NET applications using the Crystal Reports 2008 .NET SDK.
Issue
Exporting a Crystal Report to Excel or RTF format
.NET application using the Crystal Reports 2008 runtime (version 12.0)
error Invalid export DLL or export format
We've been doing some testing in-house and haven't reproduced this behavior. In order to figure this issue out we will need your help. If you are getting this error please reply to this post with the following information:
Server Operating System
Version of the .NET Framework
How did you deploy?
If you deployed with CRRuntime_12_0_mlb.msi - what was the date of the file and its size?
What is the file version of crpe32.dll on your server? You'll find this in the C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 directory
How many libpng10.dll files are on your system? List all instances.
Any additional comments
What We Know
The error invalid export DLL or export format may occur when exporting to Excel and RTF formats in .NET applications utilizing the Crystal Reports 2008 runtime (v 12.0)
Other export formats like Adobe PDF, Crystal Reports, CSV all export with no error
Some customers have resolved this by adding C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 to their environment path variables
This may have something to do with the file libpng10.dll. Both crxf_xls.dll and crxf_rtf.dll are dependent on it.
Thanks in advance for your co-operation. We hope to figure out what is causing this issue soon.Hi,
I am also having the same problem, except that I am not using Crystal Report 2008 runtime but the actual Crystal Report 2008 installation on Windows XP SP2 with VS Studio 2005 (VC++). MS .NET Framework 2.0.
Cyrstal Report XIR2 was installed on the same machine but uninstalled before installing Crystal Report 2008.
So only one instance of libpng10.dll and found in C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86
Crpe32.dll 3/1/2008 version 12.0.0.683
Crxf_xls.dll 3/1/2008 version 12.0.0.683
Crxf_rtf.dll 3/1/2008 version 12.0.0.683
crdb_oracle.dll 3/1/2008 version 12.0.0.683
libpng10.dll 3/1/2008 version 1.0.30.0 122880 bytes
There is no problem for exporting to pdf, html, word, csv, Crystal Report. If I create a testing report without any data from database, the testing report can then be exported also to rtf and xls.
Oracle 11.1.0.6 is the DB for the reports.
Adding C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 to the path did not resolve my problem.
Any idea to fix this issue?
Thanks
Kin H Chan
Maybe you are looking for
-
HT201359 Do I need a gift card or iTunes card before I use my apple Id to download
How can I use my apple Id to get free down not have a create card or others
-
Hi all, I need your help for following requirement, I need to update some of the transaction data i.e Inco terms, Price from sales order into Purchase order -> Item text for the information purpose. Can anybody suggest if it can be possible with any
-
Reversal of sign for credit accounts in FDQM
Hi I am using FDQM to load data. The client requires data to be loaded wherein all his Income and Liability accounts are NEGATIVE in the TB and all Asset and Expense accounts are POSITIVE. Hence the load file will sum total to zero always. I am not s
-
Keyword list length in 2.1
Hi all... not sure if Ive done something wrong here, but have imported catalog from 1.3 to 2.1 and a weird thing happened to the keyword list. I can only go down about halfway with my scrolling.... get to the letter 'I' and no further. If I delete a
-
I would like to create a report from the DB that gives me all users in Project/PWA 2010 where the "Prevent AD sync..." box has been checked in the user/resource configuration, but I cannot find where this is in the Project databases. Our DB is SQL 2