Isuue with Variable of Cal day

Hi All,
I am facing a problem in the qurey.
I had created a query a week before in that v r having a
variable of type char and its madatory. Now in the query automatically variable of type SAP Exit is encounter with out
my knowledge n i am to see the variable also. How *** i over *** this issue as when i check in the query that variable is placed no where.
pls let me know what i hav to do.
Regards

Hello,
Check if you have used any restricted keyfigures in your query and probably in that restricted keyfigure there might be variable restriction or else if you have any selections defined in the query check that .

Similar Messages

Is it possible to create a variable in bex with the last work day?

Hi Gurus
Is it possible to create a variable in bex with the last work day?
Actually end-user every day open queries,
    - Put in selection date day - 1 or
    - put last Friday if the day is Monday or
    - put last Thursday if the day is Monday and Friday is holiday (in a calendar for example 25 the December).
Please do the needful. It is urgent
Thanks in advance
Raj

Try this logic in a customer exit:
DATA: l_s_range TYPE rsr_s_rangesid.
DATA: X_PERIOD LIKE T009B-POPER,
           X_YEAR   LIKE T009B-BDATJ.
CASE I_VNAM.
WHEN 'ZPREVWORKDAY'.
    DATA: l_DayOfWeek(1) TYPE C,
          l_act_date     TYPE d,
          l_prev_date    TYPE d.
    l_act_date = sy-datum.
    CALL FUNCTION 'DATE_COMPUTE_DAY'
         EXPORTING DATE = l_act_date
         IMPORTING DAY = l_DayOfWeek.
    CASE l_DayOfWeek.
      WHEN '1'.
        l_prev_date = l_act_date - 3.
      WHEN '2'.
        l_prev_date = l_act_date - 1.
      WHEN '3'.
        l_prev_date = l_act_date - 1.
      WHEN '4'.
        l_prev_date = l_act_date - 1.
      WHEN '5'.
        l_prev_date = l_act_date - 1.
      WHEN '6'.
        l_prev_date = l_act_date - 1.
      WHEN '7'.
        l_prev_date = l_act_date - 2.
    ENDCASE.
    l_s_range-low = l_prev_date.
    APPEND l_s_range TO e_t_range.
ENDCASE.
Edited by: Tyler Blouse on Feb 13, 2008 8:28 PM

Dynamic Variable for last day of month

Hi all,
I have created one report where in YTD is calculated based on stsyem date. NOw in this report the cal month is in row thus displaying data month wise. But i need one key figure which giving the last day vaue of every month that are displayed in YTD i.e this is based on cal day. Thus the report layout is as follows:
if report is run in mar 2007 then it should display:
calmonth            key figure due amount
Jan 07                this should show due value on last day of jan 07 (i.e 31st jan 07)
Feb 07               this should show due value on last day of feb 07 (i.e 28th feb 07)
Mar 07               this should show due value on last day of mar 07(i.e 31st mar 07)
customer exit variable can give me only one value at a time. How can I make it dynamic to take last day value of every month as per cal month. Could anybody explain me if worked on any such issue.
If there is some how to paper kindly mail me at my email Id : [email protected]
thanks in advance
Regards,
Wrushali

Hi,
We can assign multiple single values to the customer exit.
So in the Query take CALMONTH in rows.
And take your KF in column with Customer exit variable restriction on CALDAY.
So in the code of this Cusotmer exit varible, from the Current date find out the year of the current date and then assign those 12 required days to this variable.
With rgds,
Anil Kumar Sharma .P

Restrict the Key figure to Variable number of days

Hello Everybody,
How can I achieve the following result in query??
User enters date range e.g. 21.5.2009 - 2.6.2009
Format for your reference
Cal Day Cal Month LOB   Material      Item Cost    Next 90 Day forecast QTY Last 90 Day Usage QTY
                                                                           (Qty restricted to below range)
21-May       May      LOB 1 Material A      6.20        21 May + 90 days              21 May - 90 days
22-May       May      LOB 1 Material B      8.50        22 May + 90 days              22 May - 90 days
2-Jun          June      LOB 4 Material C     53.35       2 Jun + 90 days                 2 Jun - 90 days
I appreciate the responses in anticipation.
Thanks

hi chowdary ,
could you tell me the var. creation in detail and with which reference object i need to create ...
whether i need to take LM_DATE / 0DATE while creating variable...
and i kept this variables it in filter section, based on the LM_DATE Object.
i have tried both.. y'day when i take 0DATE it giving me some results...
But at the same time it is restricting the records..
i think it could be a problem with var.. properties?
need more inputs pls.
Regards,
VJ

Error in Looping with variable

Dear All,
Please help me. i want to loop of record. i have two scheme. First, i make without variable and not error. Second, i make with variable and error occurs. as below my syntax:
First:
declare
x varchar(50);
begin
--x:='select dummy from dual';
for c1 in (select dummy from dual) loop
dbms_output.put_line(c1.dummy);
end loop;
end;
result:
X
Second:
declare
x varchar(50);
begin
x:='select dummy from dual';
for c1 in (x) loop
dbms_output.put_line(c1.dummy);
end loop;
end;
result:
Encountered the symbol 'LOOP' when expecting one...

Billy Verreynne wrote:
Why? For what purpose?
A cursor fetch loop is not the ideal processing structure.
It is slow. It requires data to travel from the buffer cache of the database into PL/SQL variables (in the PGA). It requires context switching between the PL/SQL and SQL engines.
It does not scale. More rows means more data to travel that path from the SQL engine to the PL/SQL engine. More loop iterations in PL/SQL. If a single loop iteration (for processing a row) is 1ms, then a 100,000 rows will take a 100 seconds. 200,000 rows 200 seconds. Etc. This clearly does not scale with an increase in data volume.
Also keep in mind that DBMS_OUTPUT does not write to screen or display anything. It is incapable of accessing a client device as it executes inside a server process. So each call to DBMS_OUTPUT stores that line of text in very expensive server memory. When the database call is done, the client (e.g. TOAD or SQL*Plus) can read those lines from the database and the client can display it.
So if your loop is for a 1000 rows, it means writing a 1000 lines of text into very expensive server memory - and then expecting the client to read that afterwards and display it. Why? This is not a standard client-server method. It also does not scale. It can actually crash the server when this method is abused.
The standard method would be to create a SQL cursor using PL/SQL code, and then return a reference handle (pointer) to the client. This allows the client the ability to fetch data directly from the cursor - in an optimal way that does not consume expensive server memory.I have to say it: I sincerely appreciate you taking the time to write this whenever it needs to be written rather than just giving up and letting people stumble along with bad design - it must take a lot of mental stamina to keep doing it. One day it will sink into my head also :-)

Problem with variable substitution.

Hello,
I asked this before but now I want to change the question focus.
I have scenario from IDOC to XML file.
The scenario is digital invoice for our company in Mexico and I end this scenario with java mapping that I import from SAP marketplace.
Now I have request to add to the XML file name the content of the field "<ODN_NUMBER>" from the XML data.
I try to use with variables substitution.
My payload is:
<?xml version="1.0" encoding="UTF-8" ?>
- <ZINVOIC02>
- <IDOC BEGIN="1">
- <EDI_DC40 SEGMENT="1">
<TABNAM>EDI_DC40</TABNAM>
<MANDT>400</MANDT>
<DOCNUM>0000000006599015</DOCNUM>
<DOCREL>700</DOCREL>
<STATUS>30</STATUS>
<DIRECT>1</DIRECT>
<OUTMOD>2</OUTMOD>
<IDOCTYP>INVOIC02</IDOCTYP>
<CIMTYP>ZINVOIC02</CIMTYP>
<MESTYP>INVOIC</MESTYP>
<STDMES>ZEDI</STDMES>
<SNDPOR>SAPDEV</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPRN>DEV400ECC</SNDPRN>
<RCVPOR>SAPDEV</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPFC>LS</RCVPFC>
<RCVPRN>MX_INV</RCVPRN>
<CREDAT>20100118</CREDAT>
<CRETIM>075931</CRETIM>
<SERIAL>20100118075931</SERIAL>
</EDI_DC40>
- <E1EDK01 SEGMENT="1">
<CURCY>USD</CURCY>
<HWAER>MXN</HWAER>
<WKURS>10.55530</WKURS>
<ZTERM>0090</ZTERM>
<KUNDEUINR>ACH971209KRA</KUNDEUINR>
<BSART>INVO</BSART>
<BELNR>0100017295</BELNR>
<BRGEW>0.045</BRGEW>
<GEWEI>KGM</GEWEI>
<FKART_RL>LR</FKART_RL>
<RECIPNT_NO>0000012977</RECIPNT_NO>
<FKTYP>L</FKTYP>
- <Z1EDK01 SEGMENT="1">
<XML_VERSION>2.0</XML_VERSION>
<ODN_PREFIX>A</ODN_PREFIX>
<ODN_NUMBER>1883</ODN_NUMBER>
<DATE_TIME>2009-11-01T17:05:10</DATE_TIME>
<DOC_SUB_TOTAL>4.22</DOC_SUB_TOTAL>
<DOC_DISCOUNT>3.00</DOC_DISCOUNT>
<DOC_TOTAL>1.40</DOC_TOTAL>
</Z1EDK01>
And the xml that I create is:
<?xml version="1.0" encoding="utf-8" ?>
- <Comprobante xmlns="http://www.sat.gob.mx/cfd/2" version="2.0" serie="A" folio="1883" fecha="2009-11-01T17:05:10" sello="NxZCWU8hMJMiEc2fSZafpS81Z9rUScbBotvJ8lcW76GGpmcD2lFyAV7DlNQKecYMnQJnwMVoHfGjzhpFJrjLuRcyqU3nOnH1mE1JMxY/MjLkal0Ybo2aRKCorQxx+F/Vy5ucvyeDDFAt2gx0PeHJhFS3tJ6ssc6nryz3iUr8c=" noAprobacion="49806" anoAprobacion="2009" formaDePago="Pago en una sola exhibiciףn" noCertificado="00001000000100891274" condicionesDePago="90 DAYS FROM BILL OF LADING" subTotal="4.22" descuento="3.00" motivoDescuento="Customer DiscountCustomer Discount" total="1.40" tipoDeComprobante="ingreso">
- <Emisor rfc="NMS940324RY6" nombre="Netafim Mexico S.A. de C.">
<DomicilioFiscal calle="Leibnitz" noExterior="20" noInterior="901" colonia="Anzures" localidad="Mexico city" municipio="Miguel Hidalgo" estado="Distrito Federal" pais="Mexico" codigoPostal="11590" />
</Emisor>
- <Receptor rfc="ACH971209KRA" nombre="AGRICOLA 5 HERMANOS SA DE CV">
<Domicilio calle="JUAN DE LA BARRERA NO 1249 NORTE" localidad="COL. CHAPULTEPEC" municipio="CULIACAN" estado="Sinaloa" pais="Mexico" codigoPostal="80040" />
</Receptor>
- <Conceptos>
I try to use with this variable:
payload:ZINVOIC02,1,IDOC,1,E1EDK01,1,Z1EDK01,1,ODN_NUMBER,1
I received in RWB the error:
Attempt to process file failed with com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: var_filename
Thank you in advance for your help
Elad

But my target is looks very strange:
<?xml version="1.0" encoding="utf-8" ?>
- <Comprobante xmlns="http://www.sat.gob.mx/cfd/2" version="2.0" serie="A" folio="1883" fecha="2009-11-01T17:05:10" sello="NxZCWU8hMJMiEc2fSZafpS81Z9rUScbBotvJ8lcW76GGpmcD2lFyAV7DlNQKecYMnQJnwMVoHfGjzhpFJrjLuRcyqU3nOnH1mE1JMxY/MjLkal0Ybo2aRKCorQxx+F/Vy5ucvyeDDFAt2gx0PeHJhFS3tJ6ssc6nryz3iUr8c=" noAprobacion="49806" anoAprobacion="2009" formaDePago="Pago en una sola exhibiciףn" noCertificado="00001000000100891274" condicionesDePago="90 DAYS FROM BILL OF LADING" subTotal="4.22" descuento="3.00" motivoDescuento="Customer DiscountCustomer Discount" total="1.40" tipoDeComprobante="ingreso">
- <Emisor rfc="NMS940324RY6" nombre="Netafim Mexico S.A. de C.">
<DomicilioFiscal calle="Leibnitz" noExterior="20" noInterior="901" colonia="Anzures" localidad="Mexico city" municipio="Miguel Hidalgo" estado="Distrito Federal" pais="Mexico" codigoPostal="11590" />
</Emisor>
- <Receptor rfc="ACH971209KRA" nombre="AGRICOLA 5 HERMANOS SA DE CV">
<Domicilio calle="JUAN DE LA BARRERA NO 1249 NORTE" localidad="COL. CHAPULTEPEC" municipio="CULIACAN" estado="Sinaloa" pais="Mexico" codigoPostal="80040" />
</Receptor>
I need to add folio field
Elad

Issue with Variable Personalisation in Bex Report

Hi Gurus,
I'm facing a typical problem with Variable presonalisation in the Report.
I've executed a BEX Report and filtered data on some characteristics and used SAVE AS Button on the Portal to save the resultset. When I'm trying to use the variants, again say after 2 or 3 days i couldn't find updated data for particular variants upon using the same variants rather its refelecting the old data. Further more when I execute the report and try filtering on the same criteria altogether, I'm able to see updated result set.
Is there any setting to be enabled when we personalise variants or variants are dependent on the data or the date on which they are created. Not sure why the reports are behaving this way. Or Do I need to create variants time and again.
Any pointers would be of great help.
Regard,
Yaseen

Hello,
In the BEx report, when you get the variable selection screen there input your selection and at the bottom you have the option of saving them as a variant.
Now in future when you run the report simply use this variant and execute the report. It should work fine.
Also remember date selection can be tricky. If you input todays date in the variant, it wil consider the same date in further references. So do a check on that too.
Regards,
Shashank

Problem with variable offset

Hi, I am using BI 7.0.
I have a query with 0calmonth in rows, I need the last 12 months, so I did 0calmonth from variable -1 to -11. I have the 12 rows with the month description correctly.
I have 8 columns with formulas and filter.
I can see the rows of the month I executed with the numbers without problem, but in the other rows (months before) of all the offset I don´t have the result.
Does anyone have any idea? I made it Z with other object and Z variable, but still the problem.
I tried with differents months, but the same problem.
Thanks in advance
Tomas

Tomas,
Any chance your variable on Cal Month is in the free Characteristics or the Filter? If so you entire results area is restricted to this value irrespective of what offsets you have put on. You will need to put the variable into a selection.
Regards
Gill

Problem with variable offset for 0CALMONTH

Hello Community,
I have a problem with using variables offset for time characteristic 0CALMONTH
Let's say my current query looks like this:
...................01.2006..........02.2006..........03.2006   (0CALMONTH)
Sales ..............100..................125................200   (Keyfigure)
What I want do now is to add a previous year comparison. So that it should look this way:
...................01.2006..........02.2006..........03.2006   (0CALMONTH)
Sales ..............100..................125................200   (selected months)
LY_Sales...........50..................100................100   (selected months - 12)
(LY_Sales should show figures of 01.2005, 02.2005 and 03.2006 in this example)
I used new selection for LY_Sales with variable offset for 0CALMONTH -12 but that didn't work. Figures in second line are zero. The desired figures would show up (if I expand the selected time intervall wide enough) in 01.2005, 02.2005 and 03.2005 but that's of course not what I want.
Please help if you can!
Regards,
Ulrich

Hi,
We can get an an other way by using CELL editor caoncept.
First create teh query like this:
...................01.2006..........02.2006........12.2006.....01.2005...02.20005...12.2005 Sales ..............100................125..............200.............50...........100.........100
Sales ..............100................125..............200.............50...........100.........100
Then hide the 2005 years' kf:
...................01.2006..........02.2006........12.2006
Sales ..............100................125..............200
Sales ..............100................125..............200
Though the call editor concept overwrite the second rows(selection) content with hidden columns of second row(selection) one by one .i.e first cell of 2nd row will be overwritten by 13 th cell of second column.similarly second cell of 2nd row will be overwritten by 14 th cell of second column........
First row(selection) : Cal year Charactertic with restriction 2006.
second row(selection) : Cal year Charactertic with restriction 2005.
With rgds,
Anil Kumar Sharma .P

Interval variable for Calendar Day

Hi Experts,
Please help!
We are working with CE VC 7.2, our model has an input form to a variable on calendar day (data source: BI Query). We would like to input a date range using a from and to date picker.
How do we populate the values from the date from and date to - there used to be a value help option on BI variables in 7.0 - however, we don't see this option anymore on 7.2. Is there another way to do this.
Please advise.
Thanks, Anna

HI,
I am working on CE 7.1 version and in this if you take the "Date From" and "Date To" variables are as of type "DATE" while defining the data, it will show up as date fileds attached to input box.
you can directly enter date and/or you can select the date by clicking on date picker.
I am sorry if it is not like this in 7.2, I can not test also
PradeeP

How to Find difference of cal day Period

Hi Friends,
How to get difference of cal day in period.
example is 01/01/2008 - 31/01/2008 = Number of dates
This query is in inventory to calulate average of issues and receipts in the particulat period.
Please help me any one.
Thanks and regards,

HI,
Create two replacement typr formula variables for this two characterictics dates , keep in mind while creating the repl path variable assign currency/unit as date.
Then just calculate the difference using a formula .. U can use DATE function (in the data function) in the formula though it should work without DATE function.
Hope it helps,
Assign pts if helpful..

Cal day Average..

Dear Gurus,
Iam having a problem with the cal day average my scenario is as follows:
Iam executing a report based on the Cal day where for ex:01.01.2010 - 10.02.2010 iam gettin the data which contains aggregated data for the above selection criteria thats ok with me, But i need to add another column where i can get the Cal day average since in the selection criteria i have selcted for 40 days i want the total aggreated value/40 as my average per day.
Can anyone help me in finding a solution.
Regards
Amar.

Hi,
To find day difference using function module refer below thread,
what is the function module to difference between two date
Using customer exit, find the days variance (var1) between ex.,01.01.2010 - 10.02.2010.
Use this var1 for calculating average value. I mean total aggregated value / var1.

Dynamic target directory with variable substitution

Hi everyone.
I'm trying to save a file in a folder with receiver adapter.
This folder is determined in runtime and passed to the adapter with variable substitution. My problem is that in RWB i get a error like this : 'Content of variable XXXXX is not safe'
Does anybody have done a variable substituion for output directory receiver file adapter?
Regards,
Inigo.

Hi,
Check this links,
/people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
Regards,
Phani

Problem with variables in formulas when using CrystalReportViewer

Post Author: Aksu
CA Forum: Formula
Hi! I have a problem with variables in Crystal Reports formulas, when using CrystalDecisions.Windows.Forms.CrystalReportViewer class from VS2005-project. ReportViewer always gives error:*************Crystal Report Windows Forms ViewerThis field name is not known.Details: errorKindError in File C:\{dir]}\{file}.rpt:Error in formula <mCustomerAttributes>.'Dim result As String'This field name is not known.Details: errorKind ************* Report without variables works fine with Viewer and in Crystal Reports Designer report with variables works also fine. I have tried with both "formula-syntaxes" - basic and crystal. But Viewer always gives error when trying to define new variable.I think the problem might be with CR -versions, because VS-project has formerly been designed to VS2003 and CR9 or 10. Now I'm using VS2005 and CR11. Though I have changed all references to new CrystalDecisions-asseblies (Ver.11.0.3300.0), when I debug the project and checkout the Viewers ReportSources FormatEngine Shows version CR9_2.... I have no idea where it gets this version...***************DEBUG-view when Viewer is created *******************CrystalReportViewer |_ ReportSourceClassFactoryName ... , Version=11.0.3300.0 , ... |_ ReportSource |_ FormatEngine {CrystalDecisions.CrystalReports.Engine.FormatEngine} |_ ClientVersionHeader {CrystalDecisions.Shared.ReportServiceVersionHeader} |_ | version = 920 (int) |_ Static members |_ VER_CR9 = 920 (int)**************************************** Could anyone have any answers or tips for this problem? I'd really appreciate it... ---Aksu

Has anyone been able to answer this question?
I am having the same problem:
I am designing a report in Crystal Reports XI Developer that contains parameters, which are passed to a stored procedure and are also used within formulas ( in Crystal Syntax ie. {?FORMAT_ID} ) in the report itself.
I can run the report successfully in CRXI Developer. The formulas use the correct values from the parameters entered during execution and everything looks good.
I then deploy the report to Business Objects Enterprise XI. I do all of the things necessary to manage the report including setting up the proper database connection information and default parameter values.
When I run the report using the Crystal Report Viewer, I get the following error message:
Error in File Forecasting.rpt:
Error in formula <Report Format>.
'if (not isNull({?FORMAT_ID} ) ) then
This field name is not known.
Details: errorKind
This happens when I press the "Preview" button in the Manage Object dialog from Crystal or when I run the report using InfoView.
I have changed the formulas and it doesn't seem to matter what the specific content of the formula is; other than the existence of a parameter reference in the formula. If I comment out the parameter and replace it with a hard-coded value, it gets through the formula fine.
Does Business Objects Enterprise XI support crystal reports with parameter references in the formulas?
Thanks,
Tim H.
Edited by: Tim Haley on Nov 25, 2008 11:11 PM
Edited by: Tim Haley on Nov 25, 2008 11:12 PM

How do I create an interactive PDF file with variable data

We would like to basically do a 'mail merge' of our list of customers with an interactive PDF file (including videos, menus, etc - not just form fill out and web links) to create a single PDF file that contains multiple mail pieces ... one for each customer ... with each mail piece being customized for that customer. Customizations would include different greetings (Dear Bob, Dear Dana, etc), as well as different charts based on data unique to the customer, different photographs, etc.
I've seen that InDesign and Acrobat Professional can be used to create an interactive PDF (such as from http://tv.adobe.com/watch/ask-the-adobe-ones/14-calling-rufus-about-interactive-pdf-making). However I don't understand how I can insert data from a database, csv file, excel file etc into the PDF file so that each page, or each set of pages, within the PDF can be customized.
Can anyone point me to a tool to use for this?
Thanks,
Bob Kendall

For that kind of volume and unattended operation, you want InDesign Server – which is the server/high volume edition of INDD.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Thu, 3 Nov 2011 06:58:07 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: How do I create an interactive PDF file with variable data
Re: How do I create an interactive PDF file with variable data
created by Ti26E31DSxxx<http://forums.adobe.com/people/Ti26E31DSxxx> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/4005459#4005459

Isuue with Variable of Cal day

Similar Messages

Maybe you are looking for