ISync 2.2 and SonyEricsson K750i

I had no problem under 10.4.5 but, under 10.4.6 and iSync 2.2, my calendars sync randomly : some events sync, other not. The process is interrupted by a message (translated from French) : "Agenda full".
I tried to filter out more and more events but always the same behaviour. I also tried to reset the phone but that didn't help either.
No problem with the contacts but I need this agenda.
Thanks for any suggestion...
iMac G5 Mac OS X (10.4.6)

I had the same problem and "solved" it.
From past experience I know that some stupid decision limits the number of contacts storable on the memory card to a maximum of 500 - disregarding the fact that storage for plenty more is available.
The old iSync was limited to syncing only 2 months in the future, the new version supports up to 1 year. I selected this option and got the error message you quote. Reducing the time frame for synchronization "solved" the problem. I suppose another stupid decision was made to limit the maximum number of calendar events in the phone. And you can get below this limit by shortening the time frame for which you want to synchronize entries.
PowerBook G4 Titanium Mac OS X (10.4.6)

Similar Messages

ISync 2.2 and SonyEricsson S700i

After installing the update 10.4.6 on my PB G4 1.5GHz; I could not sync my mobile phone SonyEricsson S700i using iSync 2.2. I tried it several times but every time just at the end of the sync process it gives a message "Error [S700i] There was an error pushing some changes to the phone. The synchronization may have been cancelled on the phone". I tried to solve the problem by deleting and re-installing the phone, deleting the preference file for iSync but I always get the same error message.
Any suggestions ?
PB G4 1.5 GHz Mac OS X (10.4.6)

Same Situation here with MacBook Pro and identical conditions.
Here, this is the first sync, and it failed right out of the box.

ISync and SonyEricsson K608i

I have iSync vs. 2.2 which lists the above mobile as one of the compatible devices. However, this was not the case and I have had to install a plugin from mobile.feisar.com (obtained from another post) to get it to work.
I can now successfully sync contacts and calendars but cannot dial nor send sms via the address book application.
I did not have these problems when I used the sony ericcson T630 model
Any suggestions please?
I have a flat panel iMac G4 running OS 10.4.6 but i use a usb key to enable a bluetooth connection.

http://mobile.feisar.com/addressbook.html

Im new to j2me and I cant install the application on a sonyericsson k750i

Any idea what to do?
I downlaoded Wireless Toolkit 2.5.2 - as i was not able to compile the stuff by myself.
Later i managed to compile by batch...
But somehow it doesnt matter how i compile.
I can build the demo application, i got somewhere:
public class AIRC extends MIDlet implements CommandListener{
private Display display;
private TextBox tbxMain;
private Command cmdExit;
public AIRC(){
display = Display.getDisplay(this);
cmdExit = new Command("Exit", Command.SCREEN, 1);
tbxMain = new TextBox("AIRC", "Welcome", 50, 0);
tbxMain.addCommand(cmdExit);
tbxMain.setCommandListener(this);
public void startApp(){
display.setCurrent(tbxMain);
public void pauseApp(){}
public void destroyApp(boolean unconditional){}
// Check to see if our Exit command was selected
public void commandAction(Command c, Displayable s) {
if (c == cmdExit){
destroyApp(false);
notifyDestroyed();
after creating the package and trying to install it on my mobile phone, i get "Operation ist Fehlgeschlagen" == "Operation Failed", no more info.
when i try to run it on the midp.exe emulator I got 2 diffrent errors
midp -descriptor airc.jar
java.io.UTFDataFormatException: invalid first byte 10110101 <-- this value is different every compilation/verifying/packaging
midp -descriptor airc.jad
Unable to create MIDlet AIRC
java.lang.ClassNotFoundException: AIRC
When I try to run it on the normal WTK emulator it works.
ANY idea what to do?
or what im doing wrong?
jad
MIDlet-1: AIRC, AIRC.png, AIRC
MIDlet-Jar-Size: 1562
MIDlet-Jar-URL: AIRC.jar
MIDlet-Name: AIRC
MIDlet-Vendor: Somenet
MIDlet-Version: 1.0
MicroEdition-Configuration: CLDC-1.0
MicroEdition-Profile: MIDP-2.0
manifest
Manifest-Version: 1.0
MIDlet-Vendor: Somenet
MIDlet-Version: 1.0
MicroEdition-Configuration: CLDC-1.0
MIDlet-1: AIRC, AIRC.png, AIRC
Created-By: 1.6.0_03 (Sun Microsystems Inc.)
MIDlet-Name: AIRC
MicroEdition-Profile: MIDP-2.0
PS: im on w2k server

Stsrt here and look for the correct files:
http://support.apple.com/downloads/#Java

Time differences when syncronizing iCal and SonyEricsson W810i

Does anyone know why the time of appointments and other entries in the calendar is different in my phone and in iCal? There seems to be one hour dislocation...
For example, if I add an appointment using my phone, setting it to 13.00-14.00, after syncronizing with my computer the appointment in iCal is shown to start 2:00 PM. THe other way arount, if I add an appointment in iCal to start at 10 am, after syncronizing (with iSYnc) the appointment appears to start at 9 am on my phone.
The time displayed is the exact same on my computer and on my phone, and I've tried both with and without using time-zone support in iCal.
This is really annoying and makes both my iCal AND phone calendar useless since in the end I don't know which time is correct! So if someone has any ideas on this problem, please let me know!

Got help from SonyEricsson support. The problem was that the wrong time zone was selected in my phone. (Stockholm GMT+1 in iCal and GMT (wrong!) in my phone. In settings/Time & date/Time zone choose your time zone (GMT+1 for me), and then make sure the correct is also set in iCal. After this I had to manually adjust the clock in my phone to get it all right. Also the settings for daylight saving has to be the same.

Isync 2.3 and Motorola V3r

Just buy a new Razr V3r (actual V3 also known as V3_O5) with firmware R4515G08.BD.43R.
Isync see it as V3 and accept to sync it but create 1 contact per phone number (1 contact with 2 phone number on the mac = 2 contact on the V3), doesn't sync all numbers and never sync adress and the worse is than it swap me all last name and first name.
I know their is the same problem with V3i.
Is anyone got a solution?
ps: sorry for my poor english, it's not my native tong.

A possible answer to the issue of the phone not getting all of the phone numbers is that the Razr will not synchronize numbers that have tags different than its phone book can identify. If you create a new contact on the Razr, you'll see the categories that it will identify for a new phone number. I you use the "other" tag in Address Book, or have any number tagged with a name other than what the Razr uses, the numbers will not be synchronized. I discovered this after I had a phone replaced, and had to go back in to the contacts in Address Book and re-tag the numbers that were missing on the Razr.
After doing so, all contacts synch'd the missing numbers. Unfortunately, as you pointed out, the Razr does not support addresses, and will only alphabetize by first name.
Happy synchronizing,
Gary

ISync 2.2 and Mac OS X 10.4.6 Update released: READ THIS before installing

Apple has released iSync 2.2 as part of the Mac OS X 10.4.6 Update package, and it has serious ramifications for current or first-time users of iSync. READ this information below before you perform the installation. This information is extracted from Technical Information Library article 303419, found here:
http://docs.info.apple.com/article.html?artnum=303419
iSync 2.2: Read before updating to Mac OS X 10.4.6 or later, or before first sync
iSync 2.2, included with the Mac OS X 10.4.6 Update, works with many phones. However, if you have an existing phone that you sync with iSync in Mac OS X 10.4 through 10.4.5, there are some important steps you should follow before you update to Mac OS X 10.4.6 or later, as well as after you update.
Before you update to Mac OS X 10.4.6 or later
1. Make sure that all of the contact and calendar data that you want to sync is on your computer.
2. Perform a sync with your devices before upgrading to Mac OS X 10.4.6 to make sure the information on your computer is up to date, and to resolve any conflicts between your devices and computer.
3. If you have modified iSync or installed third-party software to support your specific model of phone, or if if iSync 2.2 specifically adds support for your specific model of phone, you should consider removing your phone from iSync, undoing these changes and uninstalling that software before upgrading. Your phone will not work with iSync after applying the Mac OS X 10.4.6 Software Update and your third party software will need to be updated.
Note: Reudo's Sync for Mac is not affected and does not need to be uninstalled prior to updating.
If you skip these steps, you will see this message after upgrading: "Plug-in for this phone model is missing. Install that phone's plug-in if you want iSync to support it."
4. Make sure that your phone is configured to use its memory to store contacts instead of a SIM card. The steps on how to do this vary from phone to phone—consult your device's documentation for how to check its configuration, and if necessary how to change your phone to store contacts in its memory.
5. Make sure your phone has the correct date and time set.
6. Make sure that you have a current backup of your Address Book and iCal data.
Refer to the article for additional instructions and an illustrated example of the steps to perform before installing the update.

as the jump to intel progresses, so too will incompatibilities between PPC and intel mac. this will force us all to buy more apple.
G4 450DP Mac OS X (10.4.4) digidesign, motu, apogee

Problem syncing after updateing to iSync 2.2 and OS 10.4.6

I can't sync my Nokia 6620 after updating iSync 2.2! I get an error massage "The phone address book is full. Please delete some contacts on your phone or change filtering options and syncronize again."
I tried deleteing all the contact on my phone and syncronize without any luck! Tried to reseting the device and syncronize; no luck! I have even deleted the pairing and re-paired — nothing worked!!
Please help!!! I have a Dual 2 GHz G5/2.5 GB SDRAM. Thank in advance.
[img=http://img58.imageshack.us/img58/6893/isyncerror1zx.th.png]

I doubt that the problem is related to having more that one copy of AppleWorks on your hard drive, although there is no need to have more than one copy of the same version & language, i.e. US/North American English 6.2.9 (which also contains 6.2.8 if you purchased the retail box) or French 6.2.4/6.2.3.
Personally, I don't use the assistant to prepare an envelope as I set up my own template/stationary in ClarisWorks long before there were assistants. Others also have problems with the various assistants. Since it crashes when you go to Page Setup, the problem could be in AppleWorks (more likely) or in your printer driver (less likely). The first thing to do is delete the AppleWorks preferences. Deleting AppleWorks & reinstalling does not touch the preference files, they must be moved manually. It also is necessary to delete these preferences after every AppleWorks crash. See my user tip, AppleWorks has stopped working correctly, for more information. If this doesn't work, please post back, especially with the make & model of printer you are using.
Peggy
Edit: It is not necessary to post a question more than once. Since this is a user-to-user forum, people answer questions as they have time & ability. If you accidentally create a duplicate post you have up to 30 minutes or until someone posts a reply to delete the post by clicking the little trash can when viewing the thread. You can also edit a post by clicking the pencil.

ISync 2.4 and Sony Ericsson T610

I have always stored contacts in my T610 as "Last Name, First Name" and never had a problem syncing with my Mac address book. Now with iSync 2.4, "Last Name," ends up in the First Name field and "First Name" ends up in the Last Name field. This seems like a bug. Has anyone else seen this?
eMac 1.25 GHz w/ SuperDrive Mac OS X (10.4.9)
eMac 1.25 GHz w/ SuperDrive Mac OS X (10.4.9)

Maybe I should have been more clear about this.
You cannot install iSync 2 or later using Pacifist from anything but a Mac OS X 10.4 or later Install or Upgrade DVD - either the one which shipped with your machine, or a commercial universal installer disk.
You don't have the option at the bottom of the Devices menu because, no matter what you might believe about the process you followed, you STILL have iSync 1.5 installed. The list of menu items you show is the view in iSync 1.5, not iSync 2 or later.
You need to locate your Mac OS X 10.4 or later disk or purchase a retain version, and then follow these instructions:
Launch Pacifist. Insert your Mac OS X 10.4 Install or Upgrade DVD in your optical drive and wait for it to mount. Press the now-activated Open Mac OS X Install Packages button in Pacifist. Wait for the window to appear - it will take some time to load all of the resources - then double click on the Contents of Essentials.pkg file to open it, double-click on the Applications folder, select iSync.app then press the Install button.
That will install a copy of iSync 2 into your Applications folder. Then run the Mac OS X 10.4.9—at minimum, or the 10.9.10 or 10.9.11—Combo update for PowerPC or intel processor based machines—whichever is appropriate for your platform—to update it to release 2.4.
There is no other way to do it: Pacifist. Original disk. That's it.

ISync 2.2 and 9500

it seems I didn't "read the docs" before updating to 10.4.6.
I was using iSync with my Nokia 9500, and it was synching fine, thanks to software created by Matcatastrophe.
I now know that it no longer works with the new iSync, I probably corrupted the new installation by trying to load the old hack. That's according to Nova media Mobile Data Solutions, which sells the new plugins that work with the 9500.
I bought and tried to install the Nova plugins but it won't work and their website says I should contact Apple about repairing iSync 2.2. So here I am.
What do I do now? Do I reinstall the entire 10.4.6 update? Is there an easier way?
Thanks in advance.
Vincent
PowerBook G4 17" Mac OS X (10.4.6) 2 GB DDR SDRAM

I realize that this topic has been discussed elsewhere, but apparently, unless I missed it, there has been no resolution.
The question I really need answered is whether reinstalling the entire combo 10.4.6 combo update is a good idea or does not do it.
Thanks again.

ISync 2.4 and Nokia 6315i

My company just purchased the field team Nokia 6315i phones (verizon). Has anyone had success with this phone and iSync? It's not on the list of devices that work...
powerbook g4 12" Mac OS X (10.4.9)

bought a new phone

Isync 2.2 and Nokia 9300

Is there anybody working with the Nokia 9300 and the new isync-update? any experiences? After updating and reinstalling the patches, i cannot add my phones to isync my 9300 is added as unknown devices and my SE T630 is seen but i cannot add it.

I had the very same problem with my 9300 and iSync, but after a while of tinkering, I managed to fix it.
The problem was in the patch that I had originally pasted into my MetaClasses.plist file. All that needed to be done was to change the following line:
<string>com.nokia.serie60v2.0</string>
into
<string>family.com.nokia.serie60v2.0</string>
After this, I restarted iSync and was prompted to send the new iSync application to my phone (v1.2). After this was installed, I ran the synchronisation and it worked. It should be noted that the first time was quite slow as it had to synchronise everything again.
PowerBook G4 1.5 gHz Mac OS X (10.4.6)

Isync 2.2 and Nokia 6021 worked few times but not anymore

I sucessfully synchronized my Nokia 6021 after uptdating to isync 2.2. It might be a coincidence, but, after the recent service downtimes with .mac, I can not get to sync my powerbook and my nokia anymore. here is what happens:
1. start isync
2. click sync
3. the acqua bar show that the operation is progressing but, after 25% of bar lenght, the acqua bar does not move anymore.....
4. on the other hand isync keeps counting thousands of contacts while I only have less than 100.
The sync opeartion used to take seconds while now it keeps going and going until I have to stop it.
Has anyone expereinced something like that?
Anu feedback would be greatly appreciated.
Thanks
Pasquale
PB G4 12", 1.5 GHZ, 512 MB Mac OS X (10.4.4) isync Version 2.2 (108.0), Nokia 6021 supported
PB G4 12", 1.5 GHZ, 512 MB Mac OS X (10.4.4)

Aur,
Thank you for your reply.
I tried to reset history several times with no luck. When I did reset history, I tried different options such as "merge..." or "erase device..." and I obtain the same result.
Here is the status that I read just below the acqua bar while synching:
"receiving changes from "Nokia 6021". contacts - 1534"
1534 is the number that keeps growing....it starts from 1 and it keeps growing.
This is really frustrating.
Pasquale
PB G4 12", 1.5 GHZ, 512 MB Mac OS X (10.4.4)

Do I use iSync with iPhone and iTunes?

I am a fairly new iPhone user and am having some syncing problems. I sync my iPhone to iTunes via a USB cable. On about every other sync, the contacts seem to hang and take a long time to complete (although eventually they do). During this time, the iSync icon on the menu bar spins and if I put my cursor over it the top line says "Canceling Sync".
I do not use MobileMe or Bluetooth to sync. I am trying to understand if I even need iSync activated? I went into the iSync preferences an unchecked the box that says Enable Syncing on this Computer but then it seems that nothing syncs over USB. But I've seen other posts that imply that you only use iSync for MobileMe, or Bluetooth or a phone that supports it (not an iPhone).
Can someone give me some direction on this. I'm thinking my contact ync issue is somehow related to this iSync issue but I can't be sure at this point.
Thanks,
David

The iSync application is only used for syncing non-Apple mobile phones, however, syncing for the computer does have to be anabled in iSync's preferences.
You can't sync the iPhone over Bluetooth or using iSync. You either use MobileMe for over the air syncing, or iTunes for USB syncing.
I would suggest posting in one of the iPhone specific forums here:
http://discussions.apple.com/category.jspa?categoryID=201

Using iSync on Panther and Tiger

Hello,
I iSync happily between .Mac machines running Tiger.
I'm planning to set up a machine running Panther (so that I can run Epicad SyncAgain) and want to run iSync 1.5 to sync contacts, events and tasks on that machine with my .Mac account. Will I be able to sync my Tiger machines using iSync 2.1 to the same .Mac account? Will Panther iSync 1.5 even work with .Mac today?
Thanks in advance for your feedback.

Doing exactly this, I have had some success, certainly no weirder trouble than I see a lot of folk having right now (occasional unable to login to .Mac server warnings on one of the tiger machines)
Good luck
Andy

ISync 2.2 and SonyEricsson K750i

Similar Messages

Maybe you are looking for