ISync failed with Nokia 9300i when update from Mac OS 10.4.9 to 10.4.10

Hi all,
My Nokia 9300i doesn't iSync anymore with 10.4.10 Mac OS. With the previous version, it worked fine and smoothly.
Connection: tried both USB and Bluetooth
Reset any connection (Bluetooth) on both Mac and Phone
Symptom: begin to sync but fails when reaching the 100% contacts communication and when beginning with transferring information.
Any idea what changed with this PS version that may affect iSync?
Thanks a lot for any help!

Hi,
Thanks for the advice. I try to reboot several times but doesn't help. I tried also to reboot removing my memory card as well. No success. I copied here below the message coming from the iSync log.
10:06:24 Connecting to Nokia 9300i
10:06:44 Device "Nokia 9300i" connected
10:06:44 Receiving changes from "Nokia 9300i".
10:07:52 "Nokia 9300i" finished receiving changes
10:07:58 "Nokia 9300i" Processing changes...
10:08:04 "Nokia 9300i" engine processing complete
10:08:04 Applying changes to "Nokia 9300i"
10:08:04 Error [Nokia 9300i] An unexpected error occurred.
10:08:04 Error Device "Nokia 9300i" synchronization failed

Similar Messages

Xmlparser.parse fails with ORA-20100 when reading from mapped network drive

Hi
I have a problem with the xmlparser when parsing an xml document from a mapped network drive. If I read the xml document from a local drive, then there is no problem.
I haven't been able to find any documentation specifying this. Is there any way to parse a file from a mapped network drive???
To clarify, I have created an example procedure, that parses an XML doc from disc, notice that the G: drive is a mapped drive:
CREATE OR REPLACE procedure test_xmlparser is
p xmlparser.Parser;
dir varchar2(100) := 'G:\Vejdirektoratet\root\xsl';
errfile VARCHAR2(32) := 'error.log';
begin
p := xmlparser.newParser;
-- set parser properties
xmlparser.setValidationMode(p, FALSE);
xmlparser.setErrorLog(p, dir || '\' || errfile);
xmlparser.setPreserveWhiteSpace(p, FALSE);
-- parse xml file
xmlparser.parse(p, dir || '\' || 'HelloWorld.xml');
xmlparser.FREEPARSER(p);
end;
The file HelloWorld.xml contains the following:
<?xml version = '1.0'?>
<message>
<text>Hello World</text>
</message>
When running this in SQL*Plus I get the following error:
ORA-20100: Error occurred while parsing: Invalid argument
ORA-06512: at "SYS.XMLPARSER", line 22
ORA-06512: at "SYS.XMLPARSER", line 69
ORA-06512: at "VD.TEST_XMLPARSER", line 14
ORA-06512: at line 1
Changing the value of the variable dir to 'C:\' makes it all work.

Hi again
I need to ask a last, hopefully ;-), question on upgrading the JDK to 1.3.1:
As far as I understand, this is how I do it:
1) Install JDK 1.3.1 on DB server
2) tell Oracle DB, to use that JDK.
Is this the correct way? And how is step 2 done?
Looked on metalink, google etc., but could only find this for 9iAS (not the DB) and Oracle Applications 11i.
thanks, Sxren

Kernel Panic when Updating from Mac OS X 10.3.9 to 10.4.7 Server Software

I tried updating our G5 Xserve with the 10.4.7 DVD. Since I have only a CD drive in the Xserve, I used a Mac Mini in target mode with the Server Install DVD in the MacMini DVD drive. Upon restart at the beginning of the install process, I get a Kernal panic.
I have a Village Tronic MPDDpro graphics card with latest drivers. 1 GB of memory. (I also tried using an external DVD firewire drive, but get the same kernel panic when Xserve tries to boot from the OS X Server DVD)
I was unable to get the xrdiags to provide any output. Tried unsuccessfully to get a Mac Mini running OS X Server to Netboot properly, so tried with xrdiags on a CD. Again no output back to the terminal administering the xrdiags start.
I tried putting the Xserve in target mode and installing the 10.4.7 from the Mac Mini. Install process went through successfully, but when I rebooted the Xserve, and before getting to the Setup Assistant, I got the Kernel Panic again.
Needing then to re-install 10.3, I reinstalled the 10.3 Server with the original disks and updated to 10.3.9 and reinstalled all the application software and setup users etc, (days of work) all went well with 10.3.9 Server.
I need to get up to 10.4.7 soon!
Any ideas what to do next?
Xserve Mac OS X (10.3.9) Xserve G5 2Ghz with CD optical drive and MPDDpro graphics card

DaddyPaycheck
Thanks for helping. I'm green at this! Getting definite experience as you can see, but can you help me with an actual real live make and model of a graphics card that is known to work on the G5 Xserve?
I called ATI re: their Radeon 9200, and was told by tech support that they do not support this card on the G5 Xserve. Yet, Scott Maiden, in his post above, referenced an ATI Radeon card.
What cards are being successfully used? Can I have a list?
Apple Tech Support will not give any such list. Maybe they know of some problem with all? (When I bought the Xserve in September of 2004, Apple Tech Support recommended the VillageTronic card.) The new, yet un-released Quad-core 64-bit Intel Xeon Xserve has "built-in graphics functionality, with mini-DVI output and support for industry-standard VGA displays," according to Apple's web site. Hopefully this will eliminate this type of problem in future releases of Xserve. But for the nasty here and now...
All I need is an inexpensive graphics card to administer this Xserve. Currently I am using a 21” SuperMatch SVGA monitor.
Thank to all who have helped.
James
jamescalvin-
The only cards I have found to work reliably in the
G5 XServe are the cheap-arse PCI models. I do not use
my XServe for serious graphics work so I do not know
how it works with other cards.
Can you swap in a known compatible PCI card for
testing purposes?
Luck-
-DaddyPaycheck
DaddyPaycheck
Xserve Mac OS X (10.3.9) Need list of Compatible PCI graphics cards

How do I make sure I am up to date with all the necessary updates from MAC?

just wait for the automatic sofeware update? is there a site where they warn of virus maleware for MAC? I am reading on the BBC technology website and elswhere of a widows virus outbreak. but where do i go for MAC?
Thanks

nefsi wrote:
dear Lyssa: does this apply for all sorts of essential updates from Apple/ adobe etc ? i.e. every time I i get the software pop-up telling me a new update is available I have to let it download the file but I have to look in the utilities for installer and activate it manually ? thanks
No: Firmware Updates are rather unusual and operate differently to the normal software updates. They require a special procedure which is documented with the update. But even the normal software updates require the Installer to run: however Software Update will take care of that for you if you let it. You certainly won't need to go looking for the normal Installer.
In your specific case, the page for MacBook Pro EFI Firmware Update 1.5.1 tells you:
To complete the firmware update process, please follow the instructions in the updater application (/Applications/Utilities/MacBook Pro EFI Firmware Update.app). The updater will launch automatically when the Installer closes.

I keep getting errors when updating from the Creative Cloud (49)

I keep getting errors when updating from the Creative Cloud (49).
" Update Failed" and when I click on Learn More. The error messages says there is a download error with (49) I am signed on as administrator, so that shouldn't be a problem. I have Windows 7.

Error 49 https://forums.adobe.com/thread/1491394
-and https://forums.adobe.com/thread/1353632
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

A problem with Nokia 5530 wirmware updating! Help!

Hi all,
I have meat the problem with Nokia 5530 firmware updating: updating allways finish with the message "Downloading of the variant package failed.Most probably there is non-commercial software in your device."
Is there any solution for that problem?
Thanks and regards,
Alexander

first its ok
then
translation:
For a better connection please insert the usb-cable directly in to the computer and not trough a usb-hub or -keybord or a dockingstation of a laptop.
Nokia Software Updater has tried downloading the software, but this is failed 4 times.
Its posible that it can be caused by a bad, slow or instable internet connection.
This failure can also occur because we have maybe a problem with our servers.
try later again
i tried it on 2 PCs one with vista and one with XP plz help me
Message Edited by progunnl on 13-Mar-2009 02:50 PM

Issue with Emoji icons when sent from iOS6 to iOS5

Issue with Emoji icons when sent from iOS6 to iOS5, all icons appear as a square on the iOS5 message screen.
Both iOS are the current version and the phones are 4S 64GB
Anybody got this problem

Hi!
What kind of RFC do you use? If you use synchronous RFC the caller waits for the answer/result of the called function. In normal cases this should solve your issue.
Regards,
Volker

When updating from Firefox 3.6 to 9.1 should I first un-install 3.6??

When updating from Firefox 3.6 to 9.1 should I first un-install 3.6??
I want a clean install of 9.1 but would like to keep all my settings, cookies, passwords, dictionary, etc.
Running a Windows 7 machine.

There is no need to uninstall the older version. you can update it.. go to help in the menu bar> then take> about firefox >then update the same..You can keep all your items in the new version..

Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

Separator page prints out with wrong name when printing from Outlook 2010

Working with Windows 7 Enterprise, Outlook 2010. We've set up our desk printers to print a separator page with the user's name, as several people use the same printers in our building. Printing from IE, Word, etc. all work fine, and it'll print
out the correct username on the separator page.
When anyone attempts to print an Outlook email, it instead prints out my username. We've found that it doesn't happen if they click on the "quick print" button, but it happens every time if they do "file > Print" or Ctrl+P.

Hi
As per the information and details provided by you that separator page prints out with wrong name when printing from Outlook 2010, please follow these steps: -
To create a custom separator page file, use a text editor such as
Notepad. On the very first line, type one single character, and then press
Enter. The character on this line defines the character used as an escape character. For example, the following list assumes that this character is the at sign (@).
Enter the escape codes for the functions you want, and then save the file with an .sep extension in the Windows System32 subfolder.
In the Print Manager, select the printer that you want to use the separator page file with, and then click
Choose Properties on the Printer menu.
Click
Details, specify the name of the desired separator page file in the
Separator File box, and then click OK.
Note:
Put the custom separator page file in one of the following locations:
In the %Windir%System32 folder.
In a folder whose path contains a SepFiles folder. For example:
Drive:\Folder\SepFiles\Subfolder
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

HT1338 I did not obtain the free Snow Leopard DVD when it was offered and now need to update from MAC OS X version 10.5.8. What steps do I need to take?

I need help updating from Mac OS X 10.5.8 to iOS6.

Phone the online Apple Store and order it.
(70966)

I have seen so much response about the Mountain Lion update slowing down computers. I am updating from Mac OS x 10.6.8. What can I do to ensure the upgrade will go fine? Do I unplug my external hard drive before installing, or keep it plugged in?

I have seen so much response about the Mountain Lion update slowing down computers. I am updating from Mac OS x 10.6.8. What can I do to ensure the upgrade will go fine? Do I unplug my external hard drive before installing, or keep it plugged in?
Also, I have the 08 version of iWork. Will this cause problems for the update? Can I update this AFTER I update the processor?

Welcome to Apple Support Communities
There's no reason to think that Mountain Lion will slow down your Mac. Just make a backup of your data before upgrading with Time Machine > http://support.apple.com/kb/HT1427
Also, check that your apps are compatible > http://www.roaringapps.com Upgrade them to a compatible version or delete them before upgrading.
The external drive won't make the OS X Mountain Lion installer fail, but it's better to unplug it during the upgrade.
iWork '08 is compatible with Mountain Lion. iWork '09 includes OS X Mountain Lion features and can be purchased at the Mac App Store.
To upgrade to OS X Mountain Lion, I recommend at least 4 GB of RAM. You can check how much memory you have in Apple menu > About this Mac

Trying to update from Mac OSX 10.7.2 to 10.7.4 via the Updater. Update Not Verified?

Trying to update from Mac OSX 10.7.2 to 10.7.4 via the Updater. Getting a message half way through the download stating the updated "could not be verified. It may have been corrupted during downloading." Any ideas for picking up the latest Update?
Uploading screenshot.... any advice appreciated.
Matt

Either try redownloading or try downloading the standalone updater: OS X Lion Update 10.7.4 (Client Combo).
Such errors may be caused by glitches in your Internet connection or because of hard drive problems. I suggest you try the following:
Repair the Hard Drive and Permissions - Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the main menu. Select Restart from the Apple menu.

How do i update from mac OS X Version 10.4.11 to lion quickly and easily?

how do i update from mac OS X Version 10.4.11 to lion quickly and easily? i really dont understand computers very much

Sorry, Kappy is, as usual, correct.
Mac OS X v10.6 Snow Leopard - Technical Specifications
Last Modified: October 07, 2009
Article: SP575
General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.

Standalone Projector won't work on a Mac when output from Mac Flash 8 Pro

Standalone Projector won't work on a Mac when output from Mac Flash 8 Pro
I'm outputting a Mac projector file that will work on my mac computer. However, when I upload it to FTP and download it my mac or another mac, it won't work! What's going on? I've tried adding ".app" to my file and it still won't work. Help!
Here's my set up: Flash 8 Pro on Mac Intel with Mac OS 10.4.11

Hi,
Does it work if you .zip up the projector and FTP the .zip and then unzip the projector on the other Mac's? A projector is basically an application. Applications in Mac's have package contents and resource bundles. When copying files over the network on Mac's, symbolic links inside the package contents and bundles can get messed up.
Thanks,
Nivesh

ISync failed with Nokia 9300i when update from Mac OS 10.4.9 to 10.4.10

Similar Messages

Maybe you are looking for