ISync no longer connecting after security update

I’ve got a Razr that I have synced with my Powerbook. Never had a problem syncing with it until now. Only thing that’s changed is I recently installed the new security update. Now it fails to connect. Bluetooth is still working on the powerbook as it connects to my wireless keyboard. and I know the phone’s bluetooth is working as it is still connecting to my wireless hands free device.
I tried deleting the phone as a device and re-adding it but when I attempt to pair it, I get an error message saying it can’t connect. Any idea what might be up here?

additional piece of info. When I deleted the phone, I deleted it as a device in iSync. I went into sys preferences/bluetooth and deleted it there, then re-paired it, setting it up as a new device. That worked, the phone prompted me to allow the pairing, I entered the passcode, all was good. But when I went back to iSync to add it as a device, it doesn’t see it.
Do we have an iSync issue with this latest security update?

Similar Messages

Trackpad no longer drags after Security Update 2015-003

I am running Yosemite 10.10.2 on my MacPro 2010. After I installed Security Update 2015-003, I noticed my Apple Trackpad can no longer drag. Here are the symptoms:
I CAN move the cursor around the screen using the trackpad.
I CAN click, and appropriate responses occur.
If I click on a menu in the menu bar, then move (hovering) the cursor with the trackpad down the list of menu choices, they DO NOT highlight. I can click on one, and it WILL BE performed, but a submenu would NOT pop out. I CANNOT drag down the menu and to the side to bring out a submenu using the trackpad.
I CANNOT move a window or other object by tap-dragging on trackpad (double tap, holding the second tap to turn it into a drag)
I CANNOT select a phrase or paragraph by highlighting it by tap-dragging on trackpad
Hover behaviors on web pages DO NOT occur (so links that should highlight, menus on a web page that would normally drop down on their own, do not do so) if cursor is moved by trackpad.
Tool tips or other hover behaviors in web pages or outside of web browser DO NOT occur if cursor is moved by trackpad.
All behaviors are NORMAL if I use my Wacom tablet stylus to perform the same cursor move.
So, if I move the cursor over something using the trackpad, nothing happens. If I then move the cursor over the same thing using the Wacom stylus, highlighting or other hover behavior occurs.
Yes, I've changed the batteries in my trackpad, and it works fine otherwise. It does NOT skip or exhibit symptoms of a poor connection. Three-finger and four-finger drags to go to Previous Page in Safari, or switch desktops, DO work.
Only single-finger dragging is gone.
This issue occurs on my 2010 MacPro running 10.10.2, but does not occur on my 2009 MacPro running 10.10.2 at work.
Both have the Security Update 2015-003 installed, as well as all other current AppStore updates.
So Security Update 2015-003 would not seem to be the issue, but that was the thing which changed on my OS immediately prior to the beginning of the undesired behavior.
There is no setting in the Trackpad control panel that has to do with single-finger dragging. I've also checked the Mouse control panel and the double-click speed is the same between the two computers (the one where Trackpad drag works, the other where Trackpad does not work).

SOLVED:
This issue went away by itself after a reboot for a software installation.

HP LaserJet 1018 no longer prints after security update

After installing the following updates on my HP Pavilion dv71023cl running Windows Vista:
Cumulative Security Update for Internet Explorer 9 for Windows Vista for x64-based Systems (KB2817183)
Installation date: ‎4/‎12/‎2013 4:06 PM
Installation status: Successful
and a new driver for the 1018 from HP:
Hewlett-Packard - Printers - HP LaserJet 1018
Installation date: ‎4/‎21/‎2013 2:01 PM
Installation status: Successful
Update type: Optional
Hewlett-Packard Printers software update released in September, 2012
More information:
http://sysdev.microsoft.com/support/default.aspx
Help and Support:
http://support.microsoft.com/select/?target=hub
It appears I can no longer print from Internet Explorer 9.
Clicking on gear icon and selecting the Print item, shows the Microsoft XPS Document Writer is highlighted instead of the HP Laserjet 1018 as I expect. When I select the HP Laserjet 1018, the Print Button becomes grayed-out.
Attemping to print from Adobe Reader X also hangs the application.
However, printing is working when using Open Office.
I cannot recall if I attempted to print between the time these 2 updates were installed, so cannot determine which is the cause of the problem.
This question was solved.
View Solution.

Sounds like you've run into some printer issues since your most recent update. First I wold recommend removing the software and then going to the HP website and re installing the software from the direct driver downloads.
First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Download this file, and if optional use the Full-feature software.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=1814094
If that does not work I would try the PL6 drivers :
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskId=135&prodTypeId=...
Install that and let me know the result!
Have a great day!
I hope you are having a wonderful week, and I hope that the weather where you are located is as beautiful there as it is here!
-Spencer

HT6207 Fails to establish VPN connection after Security Update 2014-002

I have successfully used a VPN service with Mac OS 10.7, 10,8 and 10.9. After an update with Security Update 2014-002 connection requests are directy rejected by the MacOS. When looking into the VPN-log, the same set of 4 messages is logged after each attempt:
publish_entry SCDSet() failed: Success!
publish_entry SCDSet() failed: Success!
Fatal signal 13
can't talk to PPPController : Broken pipe
Is there a known remedy?
/andersbl

The VPN connection to this specific servcie provider has worked for me with previous MacOS and with 10.9. It now fails and the only change to my Macs are that I loaded the Security Update 2014-002 in the of April. I checked by adding the exactly same VPN connection definition to a 10.6 Mac and connected from the same LAN. This succeeded. Thus I suspect the Security Update, or that there is some paramater that now needs to be defined/changed.

Wireless network will not connect after Security update 2006 06

Downloaded recent security update. Ran Disc Utility before and after. Unable to connect to my wireless network (Netgear ) which always works without a problem. After trying to connect using Internet Connection Utility I tried Key Chain First Aid and also reset the key chain. No help. Finally trashed the update packages and had to log off before it connected. Any one run into this problem and a fix? Thanks.
Guy
Mac Mini Mac OS X (10.3.9)

I had the same thing happen to me! Except with a different security update..? No fixes? what's going on? How do I "trash" the update packages?

AppleTV3 Ethernet no longer connects after automatic update

Just turned on the TV to find that the Apple TV is no longer connected to the Internet or LAN.
It does seem to have updated automatically and all the icons are the new iOS8 style.
If I go the Network I see no IP, no DNS.
Rebooted the device, rebooted the Mac Mini Server, unplugged the ATV3 from power and ethernet.
Nothing will fix it. Looks like the latest update kills Ethernet connectivity.
I have a local Gigabit Switch and it shows that the Ethernet port is active when I plug in the CAT6 patch cable to the ATV3, but the ATV no longer finds the LAN.
Anybody else having this issue since the automatic software update?
Help! (Kids have been promised a Movie night and now this....)

I had this issue last night as well. I'm connected through ethernet and was not able to connect to any services. In fact, my home screen just showed the Computers icon and Settings icon. I also restarted the Apple TV a number of times as well as my router it is plugged into. What I found is that for some reason it was taking a little while longer to connect to the Internet. If I waited a bit it eventually connected. I checked this morning and when I turned on the Apple TV it seemed to be back to normal and connected right away.
I know that's not a real specific answer, but maybe you can go to the network setting and give it a minute to see if it eventually assigns an IP, DNS, etc.

VPN no longer connects after ios7 update

I just downloaded ios7 and my VPN will no longer connect. Any suggestions?

I had this issue last night as well. I'm connected through ethernet and was not able to connect to any services. In fact, my home screen just showed the Computers icon and Settings icon. I also restarted the Apple TV a number of times as well as my router it is plugged into. What I found is that for some reason it was taking a little while longer to connect to the Internet. If I waited a bit it eventually connected. I checked this morning and when I turned on the Apple TV it seemed to be back to normal and connected right away.
I know that's not a real specific answer, but maybe you can go to the network setting and give it a minute to see if it eventually assigns an IP, DNS, etc.

Email Accounts no longer connect after software update

Hi,
I updated to the latest software and after doing so my email accounts that do not use the BES are failing to connect. For example, yahoo email, google email, or my service provider host email do not connect.
I have deleted those accounts, restarted the phone and attempted to reconnect to them but they all say the same thing that they server is unavailable and the account cannot be added. Now, I could understand one of those, but all of them with the same issue?? There is something else at work here.
Since my service provider is not the issue in this case, the phone is, how can I get this corrected?
thanks.

Ignore that advice (for now) regarding a security wipe. This user is making many off the cuff posts with, quite frankly poor advice and poorly explained suggestions.
You might first connect with your BES Admin and confirm that some IT Policy disallowed personal email accounts (you mentioned your work email on BES is working correctly, so you are obviously getting good data connections).
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Slow and erratic connection after security update

Any ideas? Since the latest software update I have had problems with broadband connection - takes forever to load safari and send/receive e-mails - sometimes, but not always, asking for password and telling me its incorrect. Have checked settings with ISP and they are fine.......... a PC windows user in the house is having no trouble with broadband from the same livebox so its appears to be a problem with my mac

burwash wrote:
I appear to have solved the problem. Very un scientific ..............unplugged everything, went and had a lie down for ten minutes. Plugged everything back in and everything seems to be resolved.
*Hi burwash, Welcome* to Apple's Users Help Users Forums.
Sounds like you did an SMC reset—often recommended.
Good Luck, JP

Safari unable to establish secure connections after security update

Is Apple going to fix this or at least tell us how to go back to previous version that worked fine??? Does any one know haow to do either???
I too have had it!!! I have used a Mac for over fifteen years, but this may be the last one!!! There does not seem to be anything intuitive about it any more.

we are also running cucm 9.1.2 and are considering getting several sectera viper units.
did your issue ever get resolved?

Mail 2.0.5 CRASHES ON OPEN after Security Update 2005-009(Tiger Client)

I'm trying to figure out how to fix this.
I rebooted into a techtool pro e-drive and repaired permissions (as well as some other repairs to the drive, etc), but it still is crashing.
I created a new user and opened mail just fine there.
So... it is something in my account. Not sure exactly what to do next?

I'm having the same exact problem. (See Mail 2.0.5 crashes when I get new mail). I deleted my preferences & my junk mail settings, to no avail.
A remarkable number of other people are posting with similar problems, just in the past week or so alone, and as far as I can tell, no one has figured it out. There is definitely a bug here. I have a hunch that it may be related to a recent software update. I'm going to post this to the other threads in hopes of garnering some attention from Apple.
For posterity's sake, I am connecting to a Gmail account, a POP account, and a .Mac account.
See also:
Mail keeps crashing
mail 2.0.5 CRASHES ON OPEN after Security Update 2005-009(Tiger Client)
Mail crashes immediately after opening--why?
Mail Crashes CONSTANTLY!
Mail quits when launching
Mail crashes at open
Mail crashes when downloading new mail.

Rosetta Problems after Security Update 2012-001

My crack team of sys admins and I have devised a method for resolving some of the issues regarding the Security Update 2012-001 and Rosetta.
http://www.educate-it.org/content.php?130-Rosetta-Issue-after-Security-Update-20 12-001
Click this link for an Installer that will revert the files necessary for some Rosetta apps to run after the Security Update. This is a band-aid and is only recommended in emergency situations. Apple is currently working on a fix, but until that happens, we are stuck with reverse-engineering their update. I hope this helps those in distress from this update.

Backup files off the computer (not TimeMachine) and disconnect.
If you have TM, or a option key bootable clone use that to erase and restore from.
If not, c boot off the 10.6 disk, use Disk Utility to >Repair Disk and Permissions, (do not format or erase!!) and simply re--install 10.6 from the disk. Note: Does not touch your files and most programs, but backup your files regardless.
Note: If Disk Repair gives a error that is not repaired, then you have to consider erasing the drive (with Zeros) and try reinstalling 10.6 fresh or replacing the drive.
Reboot and log in, update to 10.6.8, it should not include the security update at this time (second pass it might show) because it was just released and they might need to pull it. (they need to pull it)
When you reboot, make sure to reinstall any programs that installed kext files into OS X, you'll know, they won't work.
If you get gray screen, hold the shift key and update your installed software so it's compatible with 10.6.8.
Learn how to clone here
http://www.bombich.com/get_ready_for_lion.html
TM help here
http://pondini.org/OSX/Home.html
Learn how to make copies of your 10.6 disks here
http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
Learn how to make a bootable SL USB
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
Learn which programs ARE NOT compatible with Lion
http://roaringapps.com/apps:table
Long live the Snow Leopard.

After Security update 2011-005 I my second monitor is black.

Hi Folks,
After security update 2011-005, I colud not get my second display working. I tried safe boot, didn't help, tried different resolutions didn't help. Reboot did not help either.
The second display is detected but it is black.
I am currently on MacOs10.6.8 running on my MacBook Pro.
Peace.

Don't remove any screws to do an SMC reset:
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

Usb hard drive not loading after security update

usb hard drive not loading after security update
I can't seem to find any other posts about this problem.
I have three external hard rives connect by a USB hub to my iMac.
Problem is that if I turn on the hard drive(s) AFTER start up I get a message that the drive either was not recognized by the OS or that it was ejected unexpectedly.
I get the same issue but not all the time if I turn them on before I boot the iMac.
I used the disk drive utility to "repair" the drives but they always come back as "probably ok".
If I restart the iMac with the drives connected (on), it seems to work but not all the time.
A bit annoying as I am wondering if the drives are OK or not.
I don't always need the drives as they are for backing up images from my camera using Apreture.
This all began after i did the latest security update.
is the update to blame?
mahalo.

Yes, you can still use those instructions to reset the PRAM.
You said that you booted to your install disk and that your primary drive did not show up at the Select a Destination screen? That usually means that the computer is either not recognizing your partition, or it's not recognizing the hard drive itself.
Start with this article and follow all the steps even if you already tried them. I suspect that you'll get to step 4 and you'll end up having to call Applecare. If you haven't done those steps, they're most likely going to make you do them anyway, so you might as well get them done before the call.

Wifi no longer connecting after startup

wifi no longer connecting after startup... so I have to connect manually... started after 10.7.3
any ideas

Which computer are you experiencing this on?
There are several threads dealing with (mostly) iMacs + bluetooth keyboards/mice and issues with WiFi no longer automatically connecting. There seems to be some issue that 10.7.3 introduces with these series of macs.
No Apple provided solutions yet, but several workarounds: 1) attach a network cable direclty from modem/router to mac; 2) use the power button instead of mouse/keyboard to wake up mouse; 3) use USB keyboard/mouse (not personally confirmed); use airport extreme/express as a bridge.
Right now it's a waiting game until Apple provides another update. I do recommend going to Apple feeback: (http://www.apple.com/feedback/) and at least voicing your opinion. Calling AppleSupport will do the same, but they'll make you go through the same (likely useless) steps everyone else has done.
Good luck!

ISync no longer connecting after security update

Similar Messages

Maybe you are looking for