ISync no longer works with MacBook

I imported all data from my old Powerbook G4 into my new Intel MacBook 2.16 bu iSync no longer works with my phones. It starts the process then stops abut halfway through with an error message. I have tried all the solutions proposed in the discussion but the problem remains the same.

Fortunately Sony Ericsson phones are my particular area of expertise!
This is more than likely caused by some corruption in either one of your Contacts or one of your Calendars.
I have made a web-page with step-by-step instructions to go through to determine the cause of sync errors, and then what to do to resolve them:
http://mobile.feisar.com/isync_tips.html
That page usually solves 99% of iSync issues.
NB. I may receive some form of compensation, financial or otherwise, if the Google Ads on the above linked page are clicked upon.

Similar Messages

  • Upgraded to 10.4.9 - iSync no longer works with RAZR V3c (screenshots)

    iSync has been working great with my RAZR V3c. I've been using it for my Address Book and iCal.
    Upgraded to 10.4.9 and now it doesn't recognize any devices to sync to, which is odd.
    I can still browse the phone using Bluetooth File Exchange. And as you can see by the screen shots (below), the setup recognizes my phone and says everything's ready to go. But when I select my phone "Sugapablo.phone" it says in iSync that it's "unknown" and won't work.
    Is this just a f*ck-up from Apple, or is there a way to fix this?
    http://www.sugapablo.net/temp/screen1.png
    http://www.sugapablo.net/temp/screen2.png
    MacBook   Mac OS X (10.4.9)  

    Tried the advice in this post: http://discussions.apple.com/thread.jspa?messageID=4240043#4240043
    But it did not work.

  • Dell p2815q no longer working with Macbook Pro A1398

    Hi,
    Some time ago I bought a dell p2815q monitor. It would work just fine using the display port to thunderbolt connector.
    After some time my Mac Pro simply stopped picking it up. When I connect it, it seems like it tries to display on it but it blinks every couple of seconds and no input is detected on the monitor.
    I've checked that the connector is fine, it simply works with other monitors and have also tried doing a PRAM reset.
    I also checked the display itself and it works like a charm with other non Mac laptops.
    This is becoming very annoying and need to find a solution to the problem. I am running Yosemite 10.10.1.

    Hi, I got the same monitor the other day and there should be no problem getting it to work.
    Use the DP to mini-DP cable supplied with the monitor.
    Make sure this cable is plugged into the correct input DP port in the back of the monitor (not the DP port for daisychaining).
    Make sure the DP input is selected in the inputs menu on screen.
    Plug mini-DP end of the cable into Mac
    Should work ...

  • External display via Mini DisplayPort to DVI no longer works with MacBook.

    I had not used my external monitor in the last several weeks. I believe there have been a few OSX Lion updates since the last time I used the external monitor. I had installed all the updates prior to connecting my external monitor again. However, a few days ago I tried to connect the external monitor and all I get is a "No Signal" message on my external monitor. The Mini DisplayPort to HDMI works on my LCD TV, so I know  the MDP works. I have also replaced the MDP-to-DVI cord and the external display still doesn't work.
    I connected the external monitor to another computer running Snow Leopard and the external monitor works. So, the external monitor does work.
    I have seen a few posts aboout this, but nobody seems to have a solution that works or is directly on point to my issue. I have tried to use all the scenarios for plugging in the external monitor and external monitor power. I tried to reboot the laptop with and withoout the external monitor connected. Same thing with the exteernal monitor plugged in and no power, etc. Nothing works. I have tried to repeatedly turn the external monitor on and off while connected to the MacBook. Again, that doesn't work.
    So, I am open to any help someone may have. Here is what I am running:
    MacBook, Aluminum 13" Late 2008
    OSX 10.7.3
    NVIDIA GeForce 9400M

    While we all have MacBooks in this forum most of us don’t run Lion. There's a Lion Support Community where everybody has Lion. You should also post this question there to increase your chances of getting an answer. Lion seems to have problems with external monitors.  https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

  • 6/9/11 update old usb keyboard no longer works with macbook pro

    Hi I have been using my old Imac usb keyboard with my macbook pro at work since I got my macbook pro. But as of yesterday I have not been able to use it anymore.  Any suggestions to a fix or do I have to buy a newer keyboard?  I need the numbers pad to entering data.
    Any suggestions would b great.
    Dharma

    Your message would be easier to decode if you had proofread it before posting.
    Does your keyboard work when the mouse is plugged directly into the computer instead of into the keyboard, or does the keyboard not work at all? If not at all, then it sounds as though you're right in guessing that the keyboard isn't getting power for some reason (bad cable? bad connection inside the KB? USB port on computer shut down?) If the KB works when the mouse isn't plugged into it, then the mouse and KB together are demanding more power than the computer's USB port can supply, and neither is getting what it needs when the mouse is connected to the KB. In that case, plug the mouse directly into the computer to use it.
    The USB port in your keyboard probably doesn't put out enough power for the mouse you are using. This is typical of older keyboards, which were designed to power old-style electromechanical mice rather than the laser mice that are commonplace today.

  • Flash drive no longer works with MacBook Pro. Now says it is unformatted, but no info what to do and not lose my data. Does not show up despite multiple prior uses on the same computer.

    Upgraded to OS Mavericks in November. Flash drive that worked fine previously with Lion and worked several times with Mavericks. Now says the 8GB jump drive (Lexar) is unformatted. Disk Utility First Aid seem unavailable. It sees the drive, but on the far left left, and when highlighted, nothing can be done with it.
    How do I recover my information or reformat it without losing my data?

    I am MikeMacBP2013. Cannot figure how to reply to Kappy's comment. Kappy, your comment did not really help me. My concern is how to save my data, not wipe and use a $10 USB drive.
    In the past two hours, I wasted most of it trying to use a software program, Disk Drill by Cleverfiles, that offers a "free" version. The free version does not recover your data for you. It is not a free 30 day trial. It is deceptively advetised - it will recover data but you will not see your data untless you pay them almost $100.
    Instead of trying to recover the data on the USB drive, this program ran a recovery on my computer hard drive and any disk image it could find on my computer until I stopped and deleted it. Apparently, it collects and keeps data recovered locked unless you pay for a key to download your data. This is not clearly presented up front. Had I known, I would never have put their software on my computer.
    I need direction to a reliable recovery program that is not this sneaky and deceptive. I stopped it when I discovered it was not doing what I had clicked for it to do, and removed the software.
    I am looking for a recommendation for a program that will do what Apple Disk Utility does not do - restore the formatting that may have been corrupted, or at least recover my data files so I can put them on other portable media.
    I recently installed a CalDigit Thunderbolt Dock to get USB 3.0 on my early 2011 Mac. I suspect this may have contributed to this disk failure but will have to contact their tech support tomorrow.
    Thanks for any suggestions for a reliable free or reasonably priced recovery software that someone can attest from using really works.

  • My earphones will no longer work with my macbook air and the headphone jack is no longer an option for output on the sound menu. Any suggestions?

    My earphones will no longer work with my macbook air and the headphone jack is no longer an option for output on the sound menu. Any suggestions?

    Try deleting the account from Mail and then add it.

  • Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices?  recent problem starting March 1, 2015.

    I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise.  As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600. 
    On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's.  Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date!  but sadly stays on LTE.
    Have tried resetting, replugging etc...
    Also, tried checking on updates.  Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
    A mystery...

    Reset the TC to factory and redo the setup. see details below.
    Here is the typical list of things you should try.. and if this doesn't help post again.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
    If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
    How is the TC connected into the network? What function does it have? Router or bridge for example.
    Post a few screenshots of the setup.

  • Function keys no longer working with a new keyboard...

    I got a new keyboard and my function keys no longer work with it.  I am used to have them used in the standard format, i.e. F10-F12 control the voume, etc.  I have the "Use all f1,f2, etc." button clicked.  I have also tried restarting my computer.  Any thoughts?

    Try doing a SMC reset and PRAM reset.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

    Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

    Standard troubleshooting...
    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove apps from Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    4. If still a problem restore with your backup.
    5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    6. If still a problem, it's likely a hardware issue.

  • Bluetooth No Longer Working With Headset

    I have a Motorola bluetooth headset that I've used with my ibook before without a hitch, but when I screwed up OS X and reinstalled it (note: reinstalled the operating system, but didn't format) it no longer works with the headset. I can connect to it just fine, but if I try to use it for anything such as switch my audio output to the headset, the program will freeze - same applies to using the headset for input. The headset isn't broken as it works fine with my phone, but my ibook won't cooperate and they are paired correctly. Is their someway to reinstall the bluetooth drivers or something to that extent? Thanks

    jrnet154 wrote:
    Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri
    If you have a headset, why use Raise to speak? Kinda defeats the purpose of the headset.
    Press and hold the button on your headest to call up Siri.

  • Firefox no longer working with Mac OSX 10.4.11

    i'm using Mac OSX 10.4.11 and Firefox 3.6.12. As i understand it any of ur upgrades no longer work with this computer system. ( I tried to upgrade last week and ur site said upgrades no available gfor my platform version. Last week every time i conducted a search (default Google) i was redirected to http://search.creativecommons.org/?q=crossword+puzzles&sourceid=Mozilla-search.what gives? Have I been hijacked? also sites that I use daily are clipped and entire pages are smaller than usual . see www.shockwave.com
    If u are no longer supporting Mac users, please let us know in advance or at least post it on ur site. Can no longer use Firefox...

    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Cmd+Shift+r to reload the page fresh from the server.
    (You also can clear Firefox's cache completely using:
    Firefox > Preferences > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now")
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
    Tools > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?
    If you open about:crashes, you should get links to online crash reports. You could post some of the crash IDs for review by volunteers here.
    Given the timing, another issue might be some ads or media in the page. There are some add-ons to block such things...

  • HT204416 My Safari is no longer working with many sites.  However Chrome and Firefox work fine.  I would like to re-install Safari in an effort to clear up the problem I can not resolve.

    My Safari is no longer working with many sites.  However Chrome and Firefox work fine.  I would like to re-install Safari in an effort to clear up the problem I can not resolve.

    1. From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    2. Select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
    and confirm. Test.
    3. If the above steps don't resolve the problem, please describe it in more detail.

  • Facebook and Slacker no longer working with Firefox. Still work with Explorer. Until a week ago problem did not exist.

    I am for about one week not able to input information on Facebook. Also the Facebook page appears in a huge font. Regarding Slacker I do not see any available online radio stations. Until about a week ago everything worked fine. At present I can work with Internet Explorer, but at present can no longer work with Firefox.
    == URL of affected sites ==
    http://www.facebook.com; http //www.slacker.com
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; .NET4.0C)

    Haven't tried facebook... But Slacker doesn't work for me either. Running 4.0b7pre on Ubuntu...
    Going to google it at some point, but slacker.com returns:
    VelocityViewServlet : Error processing the template
    Invocation of method 'init' in class com.rockit.webplayer.beans.BrowserDetect threw exception class java.lang.NumberFormatException : For input string: ""
    java.lang.NumberFormatException: For input string: ""
    at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
    at java.lang.Integer.parseInt(Integer.java:468)
    at java.lang.Integer.parseInt(Integer.java:497)
    at com.rockit.webplayer.beans.browser.DetectFirefox.detect(Unknown Source)
    at com.rockit.webplayer.beans.BrowserDetect.doInit(Unknown Source)
    at com.rockit.webplayer.beans.BrowserDetect.init(Unknown Source)
    at sun.reflect.GeneratedMethodAccessor49.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.velocity.util.introspection.UberspectImpl$VelMethodImpl.invoke(UberspectImpl.java:267)
    at org.apache.velocity.runtime.parser.node.ASTMethod.execute(ASTMethod.java:197)
    at org.apache.velocity.runtime.parser.node.ASTReference.execute(ASTReference.java:175)
    at org.apache.velocity.runtime.parser.node.ASTReference.render(ASTReference.java:220)
    at org.apache.velocity.runtime.parser.node.SimpleNode.render(SimpleNode.java:230)
    at org.apache.velocity.runtime.directive.Parse.render(Parse.java:181)
    at org.apache.velocity.runtime.parser.node.ASTDirective.render(ASTDirective.java:114)
    at org.apache.velocity.runtime.parser.node.SimpleNode.render(SimpleNode.java:230)
    at org.apache.velocity.Template.merge(Template.java:256)
    at org.apache.velocity.tools.view.servlet.VelocityViewServlet.performMerge(Unknown Source)
    at org.apache.velocity.tools.view.servlet.VelocityViewServlet.mergeTemplate(Unknown Source)
    at org.apache.velocity.tools.view.servlet.VelocityViewServlet.doRequest(Unknown Source)
    at org.apache.velocity.tools.view.servlet.VelocityViewServlet.doGet(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    at com.rockit.util.servlet.StatsServletFilterAction.doFilter(Unknown Source)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)

  • I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

    I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

    Try CardMunch it works well for me

Maybe you are looking for

  • Apex4 does not render readonly attribute properly for IE.

    I found that Apex4 renders the readonly attribute with an extra quotation mark for IE. So I get this: "readonly="readonly" And it doesn't work, obviously. For Firefox, all is good. The simplest solution seems to be to just leave the Disabled attribut

  • B2B add-on

    Hi, We all know that B2B scenario involves Party to Party  communication as the systems involved in message exchange are in different landscapes.We also checkbox for sender uses virtual receiver while creating receiver determination. We have one B2B

  • Coldfusion JDBC driver setting

    I have coldfusionmx 7 installed on red hat linux enterprise 4 How can i change the coldfusion JDBC driver to oracle 10g JDBC driver, that's may be help me in solving problems " Net8 protocol error" which occured when a stored procedure return ref cur

  • Slideshow Chain Play

    iPhoto Slideshow is one of most favorite functions and I have created more than 200 slideshow. And sometimes I want to play several slideshow consecutively as a background video. Is there any way to play the slideshow consecutively apart from exporti

  • Elements 11 and Encore CS6

    Has anyone installed them on one machine without any issues. Encore CS6 was already on my machine. Installed E11 then Encore keeps crashing on opening either existing or new project.