Isync not working with E61 when its supported in isync v3

Hi Guys,
I have isynced a Nokia E61 on my mac with no problems, but after backup the data on a pc via Nokia's own software I cannot isync up with the phone on th mac, I can seem to add it as a bluetooth device but when in Isync trying to add the phone (which is totally supported in 10,5) it says isync cannot connect to this device. Was it syncing with PC that did it? I had the latest Nokia software on the phone so did add any new software updates or the like. Any ideas? Cheers B
Message was edited by: Andrew Brough

exactly same here. 1. had a normal L7, synced it succesfully with my mac so i have all my numbers on the computer. 2. mobile was stolen so i went to get a new L7 at O2, little did i know they had given me a different phone. not able to sync with bluetooth, nor with USB. Also, have downloaded the 'plug-ins' but dont really know how to install them since they contain no programm, only some strange .plist files...but i take from you huub that it didn't sem to work anyway...spoke with O2, they told me to call motorola, spoke with motorola they told me to speak with apple, spoke with apple, after being thrown out of the line twice by the assistant (the easiest way to deal with a caller who asks strange questions..) i was told they had no clue and that i'd have to wait a few weeks possibly months till the next operating system comes out....i am about to explode...
i do hope someone can help us here, im sooo frustrated!!!!

Similar Messages

  • Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

    My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
    I have had this working previously but at the minute it seems to not be playing ball....any thoughts
    Thanks
    Dan

    BUMP
    Any ideas?

  • Overdrive Media console not working with iTunes when transferring audio books.  Any suggestions?

    Overdrive Media console not working with iTunes when transferring audiobooks.  Some parts don't transfer.

    Robin, I have the 4S too. Here's wha I've been doing. Well, I am downloading wma books, but it is super time consuming and annoying. First, shut off genius in your preferences in iTunes. Also change to spoken podcast for speed. Then, you start to transfer from Overdrive. It will create a playlist with your book title. Open up books though because you need to keep an eye on it. It may download like three parts and then you may have a grey one. When you get the grey, cancel the transfer, delete the greyed part, exit iTunes, re-enter iTunes, and then try to download the remaining book parts. I usually have to re-enter iTunes three or four different times during a book. When your book is downloaded, all black and none grey, open up the playlist folder and double check that all parts made it in there. If not, carry them from the books folder to the playlist and then move it into numerical order.
    Re non bookmarking problem. I now have a new habit of checking what part I am on before i shut off my phone or switch to another book. It does save where you were, it just doesn't show you. For instance, if I start part three and then play music, and then go back to the book playlist, it will appear as if we are back to the beginning, but if I go to part three, it will start up from where I was. So, just start checking and then it is easy. I am flabbergasted that no other proper solution has been offered by Overdrive. This has been a problem since October. I also wish they would acknowledge the problem on their website as well as post what version number of update they have. I have 3.2.1.0 and think that's current. Does anyone have newer than this. Good luck, and happy commuting!
    An easy, quick workaround is to plug external speakers into your laptop and take it with you in the car. A bit unwieldy, but I can't commute without books.

  • Captivate 5 not working with LMS when linking to AICC published file

    When we publish and link our Captivate 4 files. Everything works fine. Now that we've upgraded and tried launching the Captivate 5 files. We only get a loading screen. Can someone help us? We provide training for over 10,000 employees and train several departments to use Captivate for our LMS, but now with Captivate 5 not working it brings up a big issue for us.

    another HotFix worked for me:
    This is with reference to the issue you are facing with AICC courses on LMS.
    Please follow the steps mentioned below and let me know if this solves the issue for you.
    1.       Close Captivate if already launched.
    2.       Navigate to Captivate installed folder ( For Ex : C:\Program Files\Adobe\Adobe Captivate 5)
    3.       Navigate to folder “Templates”
    4.       Open folder “Publish”
    5.       Open folder “AICC”
    6.       Rename the HTM file “default.htm” to “default_old.htm”.
    7.       Download the zip the file from https://acrobat.com/#d=rZv8-z9C0z4PPMpqjbkZIQ , Unzip the contents and copy the HTM file “default.htm”
    8.       Paste it inside “AICC” folder.
    9.       Launch Captivate and open the project.
    10.   Re-publish the project and upload the content to LMS.
    Let me know if this solves the issue.
    Thanks,
    Ashwin Bharghav B
    Adobe Captivate Team
    hope it works for you!

  • E4200 Not Working with ATV2 when wired

    I have an E4200 router & am trying to get it to work with ATV2 through HomeSharing & iTunes. It works fine when my PC is wireless & the ATV2 is wireless. BUT, when the ATV2 is wired via ethernet & the PC is wireless -- nothing! 
    PC is Win 7 64 - SP1
    ATV2 is 4.4.3 (3323) and the router is:
    E4200 is 1.0.03 build 14
    Help!!!!!

    Check the settings on the APTV2  for Airplay . The airplay symbol appears at the bottom right in iTunes and turn the APTV2 on...
    You can try the following steps:
    A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
    1] Open the software and go to the option which says "Router Settings"
    2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
    3] Then click on Security tab disable SPI Firewall Protection, uncheck Filter Anonymous Internet Requests...
    B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

  • HTML Widget not working with iBooks when exported

    I've created an HTML widget for my iBook using Tumult Hype. The widget itself uses the draggable code. When I test it on Chrome and Safari, the code works fine. However, when I use export the iBook and test it on my iPad, the images are not draggable. This is also a problem with movie files, accordion drag and drop lists, etc.
    Anyone know what's going on?

    I never used iWeb08, but I just tried to make a site in '09 and my HTML widgets don't work either, on the web. They work if I publish to a folder.
    The widgets load flash .swf files. I had to manually put them in the site folder on my computer, and in the widget I access them with a file name like "../flash/file.swf". It worked on the folder, but when I published to the site, they don't load.
    Since iWeb doesn't know about the folder I stuck in there, I had to upload it to the site folder also. But that still doesn't fix the problem. I looked at the HTML widget source, and to me it looks like the file pathnames are correct, it just doesn't seem to be running the widget.
    Anyone have a fix for this?
    Thanks
    Bob

  • HP LaserJet P1102w Not Working with Mac when connected via USB

    I'm using an old HP LaserJet P1102w - I installed the drivers and the software, and when I connect to my computer, nothing happens. It recognizes the printer, and it says that it's using "Generic PCL Printer" as the driver. The Print Queue has a good time pretending it printed things, and nothing comes out.
    Someone tell me how to fix this POS before I throw it out a window. 

    Hi oprachck,
    I see by your post you are having some issues printing from the Mac. I can help you, but I will need some more information.
    The driver  "Generic PCL Printer", wouldn't be the correct driver using the Laserjet P1102w.
    If you are using 10.8 or 10.9, the drivers are installed by the Apple Updates.
    OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
    If you are using 10.7 or lower the drivers can be downloaded from this link.
    HP LaserJet Pro P1102w Printer Drivers.
    Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
    Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen should show the name.
    If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
    What operating system are you using? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    How is the printer connected? (USB/Wireless)
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Why i-tunes not working with the windows 8.1?

    i have windows 8.1 in my laptop,but i-tunes not working with it.when i connect my iphone with my laptop its not shown in itunes.
    can you please help me?

    See this support document. http://support.apple.com/kb/TS1538
    The latest version of iTunes works just fine with Windows 8.1.

  • Siri not working with configuration profile

    I am a Systems Administrator and we are using the Apple Configuration Utility to put profiles on our phones. We have our Wireless network, pass code and Exchange setup in the profile and ALLOW Siri and Siri while locked as well as all applications, TV, Downloads, Facetime etc. per our HR policy.
    The iPhone 5's will not work with Siri when locked or unlocked even though it is allowed in the profile. The iPhone 4s phones do not have this problem. The only way we have been able to get Siri working on the iPhone 5's is to remove the profile entirely.
    Has anyone else seen this issue? If so, were you able to resolve.
    The OS on all of our iPhones is 6.1.3 which to my knowledge is the latest and greatest. Any advice or thoughts are welcome.
    Thanks

    So today I read on another post to close all the apps running in the background by double tapping the home button and deleting them.  I did this and now Siri is working so it appears that one of the apps was intefering with Siri.  Before that I tried disabling Siri and restarting and enabling again, changing the language to another English one, restarting the Network, every other tip I read except resetting all settings.  This one closing all open apps working in the background was what did the trick. 
    I wish that there would be one central place where we could go and get the tips rather than to have to search through multiple postings.  Something Apple could do to be proactive about helping us out.  All in all I do love my iPhone 4s but that experience with Siri was unexpected.  I should have read more before buying the iPhone 4s so at least I would have been prepared. 

  • I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchas

    I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchased, and am paying monthly for my creative cloud for photography. Please help

    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • New iSync 2.2 still not working with Nokia 6230

    I was very pleased to see iSync 2.2 come out yesterday and have support for the series 40 phones - however after Installing 10.4.6 on my new MacBook Pro, and opening iSync, the phone is found by Add Device, but when I go to add it I get the message:
    "Your phone, 'xxxx' does not work with this version of iSync.
    To enable this phone to work with iSync, contact the phone’s manufacturer or your service provider to update the firmware on your phone. For more information, visit the iSync Support website."
    The picture comes up but even if I drag the phone icon to the iSync window I can not sync it - 'Turn on Device Synchronization' will not stay ticked and clicking on Sync ends in a window saying it can't sync until I add a device to iSync.
    The Phone is properly paired with the computer through Bluetooth Device Setup. (Address Book works with it just fine, as does file browsing)
    Has anyone been able to get their series 40 or more specifically 6230 phones working with iSync 2.2?
    Many thanks
    Mark Burton

    Same error message here.
    I upgraded the phone's firmware from 4.44 to 5.50 this morning and IT WORKS great with iSync 2.2!!!!!
    Thank you Apple.
    Vangelis
    I was very pleased to see iSync 2.2 come out
    yesterday and have support for the series 40 phones -
    however after Installing 10.4.6 on my new MacBook
    Pro, and opening iSync, the phone is found by Add
    Device, but when I go to add it I get the message:
    "Your phone, 'xxxx' does not work with this version
    of iSync.
    To enable this phone to work with iSync, contact the
    phone’s manufacturer or your service provider to
    update the firmware on your phone. For more
    information, visit the iSync Support website."
    The picture comes up but even if I drag the phone
    icon to the iSync window I can not sync it - 'Turn on
    Device Synchronization' will not stay ticked and
    clicking on Sync ends in a window saying it can't
    sync until I add a device to iSync.
    The Phone is properly paired with the computer
    through Bluetooth Device Setup. (Address Book works
    with it just fine, as does file browsing)
    Has anyone been able to get their series 40 or more
    specifically 6230 phones working with iSync 2.2?
    Many thanks
    Mark Burton

  • I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

    I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

    Add-ons contain a range of compatible Firefox versions, and Firefox honors the listed range by disabling the add-on if you are trying to run it on an unlisted version.
    I'm sure Yahoo! will update its toolbar eventually, but not every add-on maker supports beta versions of software.

  • Cannon 8800F not working with OS X yosemite 10.10.1  . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

    cannon 8800F not working with OS X yosemite 10.10.1  . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

    Have you done any of the following?
    http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
    Repaired permissions & restarted your comp after the installations of the drivers?
    Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
    What to do when you can't print
    =============
    not working with OS X yosemite 10.10.1
    Per your profile
    Mac OS X (10.7.3)
    Conflicting info:  Please update/correct your profile so that you can receive the correct troubleshooting suggestions.  This will assist the users in trying to help you.  Thank you.

  • HT4061 hi i have purchased iphone4 from vodafone australia 2 years back.it is unlocked, when i went to india .it was not working with any carrier in india.it was displaying no service.is it a problem of iphone or any other anybody please could let me know

    hi i have purchased iphone4 from vodafone australia 2 years back.it is unlocked, when i went to india .it was not working with any carrier in india.it was displaying no service.is it a problem of iphone or any other anybody please could let me know?

    Hi ashish,
    Did you contact TPG about activating International Roaming before you left for India:
    http://www.tpg.com.au/support/international_roaming.php
    Cheers,
    GB

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

Maybe you are looking for