ISync plugins from different providers

I own a Sony Ericsson W995, and until now I have used the free iSync plugin provided by Sony Ericsson. But I see that there are other plugin provides, such as .mactomster, nova media and feisar. How do these differ, and what do they offer that the free plugin does not offer?

Well, I probably should have marked this as a question, shouldn't I?

Similar Messages

8 iSync Plugins from Samsung

Samsung have released a collection of iSync Plugins for a few of their phones.
Models included in the download are:
• SGH-G400
• SGH-F490
• SGH-L770V
• SGH-F480 (Tocco)
• SGH-F480V
• SGH-L810V
• SGH-U900V
• SGH-P960
The download link is rather well hidden on their Support site, but can be found at this direct link on Samsung's UK website.

Well, I probably should have marked this as a question, shouldn't I?

Aggregation 2 links from different providers

Is it possible to aggregate 2 links from 2 different internet providers and summarize their bandwidths ?

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
GLBP doesn't "work" for any single device, like a router or firewall because it will "see" all the traffic is from the same MAC.
What you might be able to do is use mHSRP (if supported).
You define two virtual GW IPs and make one the active on each router (and each router is the secondary for the other). Then you route to both virtual GW IPs.

My Mac Outlook 2011 Stopped Sending Emails for all POP Accounts from Different Providers

I've had this problem before, but this time I am truly dumbfounded. My Outlook 2011 has randomly stopped sending emails, but I can still receive them. This has happened a few times and I normally change the ports/SSL and I can get it to work. But now I am at a loss. I have several email accounts that I manage. One of which is GMAIL, using IMAP, and this is the only account that currently works find receiving and sending. My POP accounts, four of them, all cannot send emails. They can only receive. One of them is with GoDaddy, and the other three are with an Asian company. I can't find any help on this. I've upgraded Office to the latest version. I've even deleted the accounts and added them back in, and I still can't send email. I'm frankly getting exhausted and sick of this type of problem happening. I honestly use this program and my MacBook Air to send clients information...only to find out hours later that a mail never sent because it's been stuck in my <hidden> Outbox in Outlook 2011. This has hurt me now badly on several occassions. Please HELP!

All SMTP servers are set correctly as far as I can tell, the connection doctor says everything is fine, and I removed all my accounts to re-add them. I added one and tried to send a message--stuck in the outbox--failed. I added another account and deleted the first one and tried to send a message--stuck in the outbox--failed. I'm pretty convinced the problem is with Mac's Mail client...I can send email from anywhere I've tried except for Mac's Mail client. Thanks for the help.
MtM

How to change ADF Calendar colors from different providers?

Hello again, I am using JDeveloper 11.1.2.3.0,
This might be the third question I am asking here about this and till now I got no answers.
CAN ANYONE PLEASE PROVIDE AN EXAMPLE OR A TUTORIAL ON HOW TO CHANGE THE COLORS OF THE ADF CALENDAR COMPONENT?
Excuse me for asking again but I am finding it very wired that nobody doesn't respond to these questions. Is there a bug or nobody really knows how to customize the calendar component?

Thanks for the time you take to explain me,
But, I'm no sur to understand all that you say.
My VO have :: Name : Calendar
Attribute
Type
idCalendar
varchar2(20)
provider
varchar2(40)
startDate
oracle.jbo.domain.date
endDate
oracle.jbo.domain.date
title
varchar2(255)
Question :
1) The tags fields is mandatory or not for the activityStyles ? If Yes, how to define it ?
I would be very obliged if you would send me a sample project. I'am lost and more i try more i don't understant.
Thanks

11 e-mail accounts from different providers are suddenly giving me errors saying they can't connect to IMAP and SMTP server?

I have 11 e-mail accounts that was working fine a minute ago, but now they all say that they can't connect to the IMAP and SMTP servers.
They all work fine on my iphone.
How should i troubleshoot this?
Thanks in advance.

Nevermind, restarted for the third or fourth time, and now it works...
Perhaps it was a time-issue.

Differences Between different isync-plugin provider, searching for K800i?

Hello
I have some question about using the correct phoneplugin for my Phone and iSync.
From functionality the original plugin of Apple is OK. I tested ith with my nokia 6230i it works fine. Ik like the function overwrite handy-device. The problem is the the SonyEriccson K800i isn't support on my Mac. In the Listing of Apple it should work. I did a reinstall of iSync und also a Reset of iSync but the my system complained that the K800i is not supported by the system (10.4.11) I also reinstall the combo update 10.4.11 but no difference.
My only complain about the Apple Plugin for my 6320i was that it Syncs only iCal dates for maximum "one" month" in the past? Is it possible to change this in unlimited dates in the past and futures. Where is the original Apple Phoneplugin for the 6320i located?
Because my K800i isn't supported I tested some other plugin from providers. The Plugin from novamedia.de works with the K800 but it synchronise both mac & phone and have no options to overwrite the handy
Also the phoneplugin from www.feisar.com is not availible for the K800i.
Is their another plugin from another developer which supported the K800i?
Who knows more?
Regards
Gérard

You don't need a plugin for the Sony Ericsson K800i - this phone has been natively supported by iSync since iSync v2.4 was released over a year ago on 13th March 2007 as part of the Mac OS X 10.4.9 Update.
If you've purchased any third-party plugins, then I'm afraid you've wasted your money! No-one should be selling iSync Plugins for the K800i anymore.
You cannot change the date ranges for syncing to 'unlimited' as phones do not have unlimited storage space for events. The limits are there to avoid overfilling the phones memory.
All iSync plugins, regardless of where you get them, sync in both directions. That is the whole point of iSync. You only get the option to overwrite the device on the first sync. After that all changes on all devices are made in both directions - if they didn't do that then your devices would not be in sync.
If you have installed third-party iSync Plugins for the K800i and are using iSync 2.4 or later, then you should remove them, as they will conflict with iSync's native support. That is probably what is causing your errors about the phone being unsupported - you can't have multiple plugins for the same phone installed at the same time.
Your problems seem to be caused more by you wanting iSync to work differently to how it is designed to work, rather than any actual problem with iSync.

Documentation for developing non-syncML iSync plugins

Hi there,
I'm interested in developing a third-party iSync plugin/conduit for a phone that, for reasons unknown, doesn't support SyncML; I have the graces of its developers in order to do so, and I will shortly be supplied with adequate documentation for the protocol used. However, nowhere on developer.apple.com can I find any pertinent information of how to instigate a different exchange method rather than SyncML. If anyone has any pointers, I'd really appreciate them!

However, nowhere on developer.apple.com can I find any pertinent information of how to instigate a different exchange method rather than SyncML.
There isn't any other exchange methods that iSync can use - it's all SyncML based. SyncML is the industry standard, so if the phone doesn't use it, you'll have to write a proprietary application to sync it, which would work independently of iSync.
Once you've read data off the phone into the proprietary application, you could interface with SyncServices (the Mac OS X framework that handles all system-wide syncing) to get that data into Address Book and iCal.
http://developer.apple.com/macosx/syncservices.html
To be honest, supporting proprietary syncing protocols is a dead-end cause and even Apple abandoned it with the release of iSync 2.
Depending on how much you value your time at, it would be many times cheaper just to buy a SyncML enabled phone that would work with iSync from the outset.

ISync plugin for 7610 Supernova?

Anyone know where I could find a iSync plugin for 7610 Supernova?
Solved!
Go to Solution.

Hi guys, I tried and re-tried your soultion translated from macuarium, but no way: i just don't get it to work for me (I've got an italian 7610 supernova), as iSync won't ever recognize the phone. The only way to have it work was to build a plugin (similar to yours) following James Lloyd's advices and original Series 40 plugins (http://www.james-lloyd.com/forum/isync-plugins/nokia-series-40-isync-plugin/).
That way I managed to have my MacBook (Leopard one) see my 7610, but it will stuck at 97% syncing and then... "connection lost" (???).
Quite obviously, something is wrong if you succeeded with your solution and I don't. Could you please help me making some points clearer?
For example, you say "in the same package folder" locate .plist file etc etc. Ok, but could you please tell me EXACTLY the path to this .plist file? I found one, but it isn't in the SAME folder (and in fact your solution won't work). BTW, James Lloyd working path is completely different from yours...
Those of you who managed getting it work, could they please be a little more specific on the steps we'll have to follow (reporting for example phone language, iSync version, OS version... anything that could help troubleshooting)?
In the meantime, as far as it goes, this is what I did following J.L.'s instructions:
- navigated to Contents >Plugins > ApplePhoneConduit.syncdevice > Contents > Plugins > Nokia-6131.phoneplugin > Contents > Resources
- Replaced entire MetaClasses.plist content with the one I attach below
- Placed .tiff image in parent folder as well as in the same folder your solution indicates (didn't understand which one will work, so went for both )
- Restarted the newly modified iSync package and turned on Bluetooth on both phone and MacBook
- Started syncing
As I said, with your solution I had troubles: iSync kept sayng "phone not supported". Now, at least, iSync is seeing my phone, although stopping at 97%. It seems the problem resides in something concerning contacts: asked also to novamedia (still waiting for their response).
At this time, new suggestions are more than welcome!!!
Message Edited by zafcom on 09-Jul-2009 04:36 PM
Message Edited by zafcom on 09-Jul-2009 04:37 PM
Message Edited by celandine on 09-Jul-2009 05:25 PM
Attachments:
7610Supernova.xml ‏16 KB

Accessing tables from different schema in CDS and AMDP

Hi All,
We are working on a HANA system which has several schema replicated from SAP R/3/Non SAP systems. We have BW 7.4 SP9 deployed on the same system and accessing the HANA views using latest BW virtual objects such as Open ODS , Composite providers etc.
We are also using the BW system for few ABAP based data processing developments. We are currently accessing HANA views in ABAP programs by creating dictionary views based on external HANA views.
We would like to however use recent possibilities of CDS and AMDP for better life cycle management of ABAP based solutions. The open SAP course on this subject was of very good help. Thanks a lot "open SAP team" for that. I would however have few open questions,
As I understand AMDP gives us full flexibility of writing sql procedures within ABAP development environment, but can we access tables from different schema into AMDP code. If yes, then sample code would help.
If the answer of first question is yes, then how do we manage transports between development and production systems where the schema names would be different. Currently in open HANA developments, such transport is manged using Schema mapping.
Can I also use different schema tables in CDS views.
We are updating few tables in ABAP dictionary after applying processing logic in ABAP program as detailed in step 1. With the new approach using AMDP, can we directly update database schema tables which will give us an optimization advantage.
New ABAP HANA program interfaces are quite promising and we would like to use them to optimize many data intensive applications.
Thanks & Regards,
Anil

Hi Anil,
I can only answer 1. and 2. (and would be interested into 3. as well):
1.
Yes you can access tables from a different schema and also HANA views. In this case no 'using' is needed.
Examples:
    RESULT = SELECT
    FROM
          "SAP_ECC"."T441V" AS t,
          "_SYS_BIC"."tmp.package/AFPO" AS a.
    WHERE ...
2. In this case, if you need schema mapping: You could use HANA (projection) views which just forward to a different schema, also see example.
Best regards,
Christoph

A little info about the iSync plugin for the N97

Several 3rd party developers have confirmed that something is broken in the way the N97 communicates via the iSync plugin. Nokia has changed, incorrectly implemented, or out right made something wrong and a firmware upgrade is DRASTICALLY needed or a plugin will NEVER work. The problem started with Nokia and ends with Nokia. They need to fix the problem with the N97. The developers feel that unless Nokia fixes this problem there will never be a plugin for the N97. It is as simple as that.
This is all the info that I have at the moment. For the time being the only way to sync your data is:
1. Prepare all of your data the way you want on your phone and then us Ovi. This can be a problem too as Ovi is not that great and is not very stable.
2. You can use Memotoo (www.memotoo.com) to sync your data via SyncML. I have used tried it and it works okay. Better than Ovi for sure but it costs.
3. You can use The Missing Sync by Mark Space (www.markspace.com - currently testing). It does not use the same way to sync via iSync plugins. The Missing Sync sends a plugin to your phone instead. The syncing is very stable and works flawlessly. The only drawback is that the phone plugin is not exactly designed for the N97 and it requires that the N97 needs to be reboot sometimes to sync. Other than this, the operation is flawless and it appears that Mark Space will be able to fix this one problem faster than Nokia will be able to fix their phone.
Hope this helps......
Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
Apple iPhone 5,
Retina MacBook Pro, iPad Mini, Nikon D4

Yes, once you have MfE, you can sync N97 to Google Calendar and Gmail Contact list. The Mac's iCal app can add the Google Calendar. For Address Book, there are two choices: Access Gmail Contact via LDAP, or do proper synchronization in iSync style (see http://lifehacker.com/393855/enable-google-contact-sync-without-an-iphoneipod-touch).
MfE is not "installed" by default in the N97, but it is actually there. I need to credit someone on this forum for mentioning it, but I'm afraid I forgot who. The steps are basically thus:
Basically go to the Menu -> App folder, look for Settings Wizard "Sett. wiz.". Try to setup an email account from there. Don't use your gmail account though (it seems like MfE tries to be smart when it recognizes some email domains and pre-selects some settings for you, but we need to be able to access some options to set on our own). Don't worry about this account, you can always delete it once MfE is configured. At some point of the setup, you will be asked what kind of server. Choose Mail for Exchange. This will trigger Mail for Exchange to be installed.
Subsequently you will see your MfE folder populated with Mail for Exchange and other stuffs. Get into it and configure your Gmail. Some settings to note:
Exchange server: m.google.com
Secure connection: Yes
Use default port: Yes
Username: Your gmail username (just the name, no need the @gmail.com part)
Password: For the gmail account
Domain: gmail.com (I believe blank is also ok, but mine is current set as such)
Make sure that synchronization is set for Contacts and Calendar only. Tasks must be disabled (it used to be because Google Calendar did not support Tasks, but even they do support Tasks now, it still breaks MfE). Email must be disabled.
Done.
I did have further trouble though. The sync keeps hanging and then eventually "Invalid Password" error (yah right, after sync halfway they realize my password is wrong... no, something else is mucked up). I eventually deleted my phone data, and re-sync it from Google again, and everything was fine.
Once you've got your phone data on Google, you can search Google for other tips on pulling the data into Mac.
Hope you have fun getting this to work.

Signing a document using a plugin in different versions of Reader

Hi,
I am signing a pdf document with my own .cer file using a plugin. Everything works great in Reader 8, I've got a green check, it specifies that this is a valid signature and I can view the certificate. In Reader 9, however, I receive a huge question mark, but it still specifies that the signature is valid and I can view the certificate. In Reader X, the signature is "UNKOWN".
How do I get rid of the question mark? Even if I delete the vector data for the drawing the question mark in the plugin, a big yellow question mark is still being displayed in Reader 9 and X.
Thank you,
Magda

Again, I know NOTHING about your plugin, your code, the certificate in question, etc.
The ONLY WAY to get you an answer is for you to provide our support staff with the PDF in question, at least as a starting point. Please open a support contract.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Fri, 4 Nov 2011 06:25:35 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Signing a document using a plugin in different versions of Reader
Re: Signing a document using a plugin in different versions of Reader
created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4007539#4007539

A bit of information about the iSync plugin for th...

Several 3rd party developers have confirmed that something is broken in the way the N97 communicates via the iSync plugin. Nokia has changed, incorrectly implemented, or out right made something wrong and a firmware upgrade is DRASTICALLY needed or a plugin will NEVER work. The problem started with Nokia and ends with Nokia. They need to fix the problem with the N97. The developers feel that unless Nokia fixes this problem there will never be a plugin for the N97. It is as simple as that.
This is all the info that I have at the moment. For the time being the only way to sync your data is:
1. Prepare all of your data the way you want on your phone and then us Ovi. This can be a problem too as Ovi is not that great and is not very stable.
2. You can use Memotoo (www.memotoo.com) to sync your data via SyncML. I have used tried it and it works okay. Better than Ovi for sure but it costs.
3. You can use The Missing Sync by Mark Space (www.markspace.com - currently testing). It does not use the same way to sync via iSync plugins. The Missing Sync sends a plugin to your phone instead. The syncing is very stable and works flawlessly. The only drawback is that the phone plugin is not exactly designed for the N97 and it requires that the N97 needs to be reboot sometimes to sync. Other than this, the operation is flawless and it appears that Mark Space will be able to fix this one problem faster than Nokia will be able to fix their phone.
Hope this helps......
Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
Apple iPhone 5,
Retina MacBook Pro, iPad Mini, Nikon D4
Solved!
Go to Solution.

caber wrote:
I think Nokia have always treated Mac users as second class citizens. The do provide some support but not enough and not quickly enough! They are not alone in this attitude and we are a minority even if we are smarter than the average PC user ( Flame warning!) in coosing Macs. We also have to be a bit smarter in figuring out work arounds as always
Caber
You really think this is a wise thing to say to someone and then not expect them to flame you? You sound just like those fanatic iBoys or iSheeple. A smart computer user is one who can see the benefit from all OS's and play to their strengths. I am glad anyone that has seen your post decided not to play your Apple-ista name game and didn't bother to comment.
Grow up dude.
Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
Apple iPhone 5,
Retina MacBook Pro, iPad Mini, Nikon D4

Different number of parses with different providers

I tried to figure out
how could I control number of parsing from MS ADO app.
To my surprise it seems that there is no general way to do it.
The behaviour is heavily dependent on underlying OLEDB provider,
and for some of the providers (Oracle's own including)
I did not manage to reduce number of parses.
I wrote a simple vbs script that:
1. Opens the connection for the given provider
2. Executes ALTER SESSION SET session_cached_cursors=100
3. Creates ADO command with 'SELECT ... FROM USER_TABLES..'
     and with one parameter
4. Opens ADO recordset with this command, reads from and closes it
Here is the script:
'TestADOCommandParsing.vbs
Dim stConnectString
Dim stUID
Dim stPWD
Dim stTestTag
Dim stServer
Dim cn
Dim cmdALTER_SESSION
Dim cmdUserTables
Dim rsUserTables
Dim param
Dim nRows
Dim I
Const c_stProvider = "Ora" '"MS" '"ODBC" '
Const adVarChar = 200
Const adParamInput = 1
Const adUseServer = 2
Const adOpenStatic = 3
Const adLockReadOnly = 1
stUID = "..."
stPWD = "..."
stServer = "..."
stTestTag = "TestParsesADO_" & c_stProvider & "_1"
If c_stProvider = "MS" Then
stConnectString = "Provider=MSDAORA;" & _
"User ID=" & stUID & ";Password=" & stPWD & ";Data Source=" & stServer & ";"
ElseIf c_stProvider = "Ora" Then
'Oracle provider.
'The PLSQLRSet attribute [=1] specifies whether OraOLEDB needs to parse the PL/SQL
'stored procedures to determine if a PL/SQL stored procedure returns a rowset:
stConnectString = "Provider=OraOLEDB.Oracle;PLSQLRSet=0;" & _
"User ID=" & stUID & ";Password=" & stPWD & ";Data Source=" & stServer & ";"
ElseIf c_stProvider = "ODBC" Then
stConnectString = "Provider=MSDASQL.1;Extended Properties=" & _
"""DRIVER={Microsoft ODBC for Oracle};" & _
"UID=" & stUID & ";PWD=" & stPWD & ";SERVER=" & stServer & ";"""
End If
wscript.echo "Provider = " & c_stProvider
wscript.echo "stConnectString = " & stConnectString
     Set cn = CreateObject("ADODB.connection")
     cn.Open stConnectString
     Set cmdALTER_SESSION = CreateObject("ADODB.Command")
With cmdALTER_SESSION
.CommandType = 1 'adCmdText
.Prepared = False
.CommandText = _
"BEGIN EXECUTE IMMEDIATE 'ALTER SESSION SET session_cached_cursors=100'; END;"
Set .ActiveConnection = cn
End With
cmdALTER_SESSION.Execute
     Set cmdALTER_SESSION = Nothing
     Set cmdUserTables = CreateObject("ADODB.Command")
With cmdUserTables
Set .ActiveConnection = cn
.CommandType = 1 'adCmdText
'The Recordset parameters
'CursorLocation, CursorType, LockType
'seem to be irrelevant for reparsing of Oracle cursor.
'Oracle session_cached_cursors parameter also has no effect.
'Command.Prepared setting affects it, but only for ODBC-based provider:
'False: N parses, N executions
'True: 1 parse, N executions
.Prepared = True
.CommandText = _
"SELECT TABLE_NAME FROM USER_TABLES " & _
stTestTag & " " & _
"WHERE TABLE_NAME LIKE ? " & _
"ORDER BY TABLE_NAME"
Set param = .CreateParameter("TABLE_NAME_Pattern", adVarChar, adParamInput, 30, "%")
.Parameters.Append param
End With
     Set rsUserTables = CreateObject("ADODB.Recordset")
For I = 1 To 10
cmdUserTables.Parameters("TABLE_NAME_Pattern").Value = "QU_%"
With rsUserTables
'The Recordset parameters:
'CursorLocation, CursorType, LockType
'seem to be irrelevant for reparsing of Oracle cursor:
'.CacheSize = 100 'Irrelevant
'.CursorLocation = adUseServer 'adUseClient 'Irrelevant
'.CursorType = adOpenStatic 'adOpenForwardOnly 'Irrelevant
'.LockType = adLockReadOnly 'Irrelevant
.Open cmdUserTables
While Not .EOF
nRows = nRows + 1
.MoveNext
Wend
wscript.echo CStr(I) & ". nRows = " & CStr(nRows)
.Close
End With
Next
Before running tests:
VARIABLE SQLTextPattern VARCHAR2(100);
COLUMN HASH_VALUE FORMAT 9999999999
COLUMN SQL_TEXT FORMAT A40
COLUMN "Invalids" FORMAT 9999999
COLUMN "Parses" FORMAT 9999999
COLUMN "Execs" FORMAT 9999999
COLUMN "Parses/Execs" FORMAT 9999.99
COLUMN CH# FORMAT 999
COLUMN ROWS# FORMAT 9999
I ran TestADOCommandParsing1.vbs script 3 times with
different providers and table aliases to distinguish
SQL from different tests:
host cscript.exe TestADOCommandParsing1.vbs
After each run I changed table alias var:
EXEC :SQLTextPattern:='%TestParsesADO_Ora_1%';
or
EXEC :SQLTextPattern:='%TestParsesADO_ODBC_1%';
or
EXEC :SQLTextPattern:='%TestParsesADO_MS_1%';
and queried V$SQL, V$SYSSTAT.
Before running the tests:
SYSTEM@ADAS> SELECT NAME, VALUE
2 FROM V$SYSSTAT
3 WHERE NAME = 'session cursor cache hits'
4 ;
NAME VALUE
session cursor cache hits 91051
Test with Oracle OLEDB provider:
SELECT
          SUBSTR(SQL_TEXT,1,200) SQL_TEXT
          ,PARSE_CALLS PARSES
          ,EXECUTIONS EXECS
          ,CHILD_NUMBER CH#
          ,FIRST_LOAD_TIME
          ,ROWS_PROCESSED ROWS#
     FROM V$SQL
     WHERE SQL_TEXT NOT LIKE '%SQL_TEXT%'
          AND SQL_TEXT NOT LIKE '%SQLTextPattern%'
          AND SQL_TEXT LIKE :SQLTextPattern
     ORDER BY CH#
SQL_TEXT PARSES EXECS CH# ROWS#
SELECT TABLE_NAME FROM USER_TABLES TestP 21 0 0 0
arsesADO_Ora_1 WHERE TABLE_NAME LIKE :1
ORDER BY TABLE_NAME
SELECT TABLE_NAME FROM USER_TABLES TestP 0 10 1 230
arsesADO_Ora_1 WHERE TABLE_NAME LIKE :1
ORDER BY TABLE_NAME
SELECT NAME, VALUE FROM V$SYSSTAT...
NAME VALUE
session cursor cache hits 91062
Test with ODBC OLEDB provider:
SELECT ... FROM V$SQL ...
SQL_TEXT PARSES EXECS CH# ROWS#
SELECT TABLE_NAME FROM USER_TABLES TestP 1 0 0 0
arsesADO_ODBC_1 WHERE TABLE_NAME LIKE :V
001 ORDER BY TABLE_NAME
SELECT TABLE_NAME FROM USER_TABLES TestP 0 10 1 230
arsesADO_ODBC_1 WHERE TABLE_NAME LIKE :V
001 ORDER BY TABLE_NAME
SELECT NAME, VALUE FROM V$SYSSTAT...
NAME VALUE
session cursor cache hits 91062
Test MS OLEDB provider for Oracle:
SELECT ... FROM V$SQL ...
SQL_TEXT PARSES EXECS CH# ROWS#
SELECT TABLE_NAME FROM USER_TABLES TestP 11 0 0 0
arsesADO_MS_1 WHERE TABLE_NAME LIKE :V00
001 ORDER BY TABLE_NAME
SELECT TABLE_NAME FROM USER_TABLES TestP 0 10 1 230
arsesADO_MS_1 WHERE TABLE_NAME LIKE :V00
001 ORDER BY TABLE_NAME
SELECT NAME, VALUE FROM V$SYSSTAT...
NAME VALUE
session cursor cache hits 91062
As you see the number of parses (both soft and hard) differ from
provider to provider.
Provider Hard parses Soft parses Executions
ODBC 1 0 10
MS for Oracle 11 0 10
Oracle 11 10 10
It looks like there is no way to control this 'bad' behaviour of
OLEDB providers, at least from ADO level. I looked through the docs on
Oracle provider for 8.1.6, but found nothing.
There is a temptation to drop all this stuff in favour of SQL
incapsulated in PL/SQL procedures...
Any comments?

D.Bender wrote:
Hello,
What's very confusing is that it doesn't always return the same number of readings. Sometimes it is 5, then 7 and afterwards 6 without changing anything. Since it is the first program for the Keithleys at work nobody can help me. I already tried highlighting execution and retain wire values. This way I saw that the VISA write command should give the correct command but the VISA read does not return the right number of readings. In addition to that I don't get any readings on the second iteration, so I can only see some on the first. The Keithley also does not show any new measurements (at least it does not show any numbers, only the typical "----").
I can't view your file but I have experience with the Keithley 2400 so here is my opinion.
This is a common problem for new users working with buffers. The most likely cause is that you are reading the buffer BEFORE it is full. If you initiate the second measurement immediately, you will likely see a Keithley error caused by trying to set the buffer values while a measurement is in progress. The keithley will immediately return the buffer contents when asked to. You, as the programmer, must set up your LabVIEW code to wait for the buffer to fill, then read the values. While a fixed delay before reading could work, here is a better solution.
I posted my code for a I-V sweep (set voltage, measure current over a linear range) here http://forums.ni.com/t5/LabVIEW/Error-code-110-in-keithley-2400/m-p/2680579#M797618. (sorry I don't have access to the files right now to upload them here. The idea is first set the registers to watch for the buffer to become full. When full, the SRQ bit will be set to 1. After starting the measurement, i probe the SRQ value in a while loop. Once it's set to 1, read the buffer and reset registers. This method is outlined in the Keithley 24xx SMU manual (I can't remember which page).

Running components from multiple providers

I have 10 DB providers, all tied to different schemas. I am tring to call a component named 'EMPLOYEE' from the correct provider/schema (see below). Since I don't want to hard code the schema in the component (it would make me have 10 different versions), I want to dynamically get the schema from the component the user is current connected to. What is the best way to do this?
'<A HREF="' || portal.wwctx_api.get_db_user ||
'.EMPLOYEE.show?

Hi,
There are many ways to achieve this.
If your requirement is just to read data from different database (and not to update it), then using a database link would be a better approach.
You could create a database link in the primary database (target database being the one you would like to query). Base your sql query for the vo using the db link.
-Arun

ISync plugins from different providers

Similar Messages

Maybe you are looking for