ISync time constraints not applying

I've been syncing my Nokia 6280, with Entourage for the last few weeks and it's been working fine. Now it's broken. The problem is illustrated by this:
I emptied the phone of contacts, calendar events and to-dos, the, synced the phone choosing "Don't sync events prior to: one week ago" and "Don't sync events after: one month".
At the end of the sync iSync reported that the phone's calendar memory was full and not all items were synced. The phone also reported that it's memory was full. I checked the phone and the calendar has events back to 7/5/07 which is the start of my Entourage calendar (and more than one week ago), and recurring events all the way until the phone's calendar runs out at 31/12/2079 (which is well past one month hence). No wonder the memory's full!
Are the "Don't sync events prior to:" and "Don't sync events after:" buttons in iSync broken. is there a way to make this work again?
Thanks in advance,
Steve = : ^ )
MDD G4 Dual 867   Mac OS X (10.4.9)  

I've been reading these forums and experimenting with this: I've reset sync history, tried different time constrains, tried syncing calendar without contacts, but there is no way to send anything but the whole calendar (which is too big for the phone's memory) to the phone.
This broke for me a few days ago, around the same time that people started other threads complaining that calendar sync, which had previously worked flawlessly, is now broken in various ways.
Was there an iSync update in the last security update? Something is definitely broken, and it means I can no longer rely on my phone to carry my calendar. One unhappy camper.
Steve = : ^ (

Similar Messages

  • Time constraint not found for A1001 B007

    Hi all,
    I have created a role and assigned users to the role and created a workcenter in Po01. While assigning the workcenter to the role, its giving a error "Time constraint not found for A1001 B007". I have checked the start date of workcenter is greater than the start date of the role. Please let me know, any config. needs to be done.

    Hi!
    Check in table T777Z in SM30 or SM31, you will see the time constraint for B007 has not maintained
    Simply add new entry and fix it. Then you can get rid of this error!
    Regards!

  • WorkManager Max thread constraints not applied to MDB

    Hi
    We have a problem with the workmanager & the max threads constraint in weblogic 10.3. It doesn't seem to apply the constraint at all. The number of beans (message-driven) seems to stop at 16 (max threads is set to 25, applications based work-manager) but it threads the calls far beyond that limit until we run out of database connections. Or at least, that's what it seems to be doing. The server has been restarted and the application redeployed. We've also created a default workmanager with the same constraint but nothing changed. Changing the max-treads-constraint to 1 leads to the same result, 16 beans are created and it seems to create threads until we run out of database resources.
    Any ideas on what might be the cause of this ?
    Edit: just noticed that the @MessageDriven( name=".. wasn't set. Might that be the cause of this problem ? (not setting the name of the mdb in the @MessageDriven annotation)
    /Laban
    Edited by: Laban on 2009-jun-15 09:22
    Edited by: Laban on 2009-jun-15 09:47

    The problem is not that it doesn't create more then 16 threads, it's that it seems to be creating more like the 1000+ threads despite the fact that i've set the max-threads constraint in the application specific work-manager (for the specific ejb). It creates 16 ejb's though.
    1 - Set the MDB's dispatch-policy to reference a custom work manager (not the default work manager)I did: opened the application, selected the ejb containing the mdb. Configuration - workload, create new workmanager. Selected the global max-constraint workmanager that i've created that says that it should have a restriction of 25 threads. Then both a redeploy and a restart just to be sure.
    2 - Set the MDB's max-beans-free-pool to higher than 16 (default is something like 1000)Is this necessary if i set the max-threads constraint. If that's the case, what is the max-threads constraint actually doing ? And another thing, the max-beans-in-free-pool can't be set using the /console if i'm not mistaken which is a bit annoying.
    3 - Configure the custom work manager with max threads constraint of higher than 16.I've tried 25 and 1, nothing seems to change. And as i mentioned, i also tried with a default workmanager. It still created 16 ejb's and a WHOLE lot of threads.

  • Time Constraints - Hr ABAP

    Hi Everyone
    Can anybody throw some light on the various time constraints used in the HR-ABAP and their relation to the infotypes.
    Also specify if their some Transaction code from where we can get to know about the value's of the time constraints.
    And also if their's any Table associated with them.
    <REMOVED BY MODERATOR>
    Thanks & Regards
    Gaurav
    Edited by: Alvaro Tejada Galindo on Feb 22, 2008 10:24 AM

    Hi,
    Please refer to the document below:
    When you update an infotype, old data is not lost but archived for historical evaluation. The system records a specific period of validity for each infotype, This enables the system to store more than one infotype record at the same time, even if their validity periods overlap. This means that the time relationships between infotype records must be defined. The concept of time constraints enables you to do this.
    HR master data uses the following three time constraints:
    Time Constraint 1
    For the entire time that the employee works at the enterprise, exactly one valid infotype record must exist. The validity periods of the individual records must not overlap. If a new record is created, the system automatically uses the start date of the new record as the delimitation date of the old record. Gaps are only allowed between the employee’s entry date and the start date of the first record.
    Time constraint 1 must be used for all of the infotypes containing information that must be available at all times. This is particularly true of personal and organizational assignment data.
    If a record is delimited because of time constraint 1, the system displays an appropriate message.
    Time Constraint 2
    No more than one valid record can exist at any one time. Records with constraint 2 must not overlap. Their existence is not obligatory. If a new record is created, the system automatically delimits the previous record, if one exists.
    If a record is delimited because of time constraint 2, the system displays an appropriate message.
    Time Constraint 3
    Any number of valid records can exist at any one time. The individual records do not conflict with each other.
    The system also contains the following time constraint indicators:
    Time Constraint A
    Infotypes with time constraint A must have no more than one record. The system automatically assigns the record a validity period from January 01, 1800 through December 31, 9999. This validity period cannot be subdivided.
    Infotype records with time constraint A cannot be deleted.
    Time Constraint B
    Infotypes with time constraint B must have no more than one record. The system automatically assigns the record a validity period from January 01, 1800 through December 31, 9999. This validity period cannot be subdivided.
    Infotype records with time constraint B can be deleted.
    Time Constraint T
    Infotype records with time constraint T depend on the subtype.
    The principles of data entry and time constraints that apply to infotypes ensure that data is consistent and accurate. They also constitute the basis of time recording, payroll accounting, and reporting.
    Thanks,
    Sriram Ponna.

  • Calendar time constraints

    I started another thread about this but have had no replies. I know this means no one has a fix, but it would help a lot to know the answer to this question:
    Is anyone currently syncing calendars - iCal or Entourage - to an external device, particularly a Nokia phone, where the iSync time constraints - "Don't sync events older than:..." and "Don't sync events after:... - are actually working?
    I've established that I'm not the only person for whom they no longer work, but if I can find someone for whom they do actually work, then I'll keep debugging my system, instead of looking for a workaround and hoping it's fixed in the next update.
    Thanks in advance,
    Steve = : ^ )

    A time constraint indicates whether more than one infotype record may be available at one time. The following time constraint indicators are permissible:
    1 = An infotype record must be available at all times. This record may have notime gaps. You may not delete the record last stored on the database because all records of this infotype would otherwise be deleted.
    2 = Only one record may be available at one time, but time gaps are permitted.
    3 = Any number of records may be valid at one time, and time gaps are permitted.
    Other possible time constraint indicators are as follows:
    A = Only one record may ever exist for this infotype. It is valid from 01/01/1800 to 12/31/9999. Splitting is not permissible.
    View V_T582B Infotypes Which are Created Automically controls whether the system automatically creates the infotype record for an employee hiring or an applicant data entry action.
    Infotypes with time constraintA may not be deleted.
    B = Only one record may ever exist for this infotype. It is valid from 01/01/1800 to 12/31/9999. Splitting is not permissible.
    Infotypes with time constraint B may be deleted.
    T = The time constraint varies depending on the subtype.
    Z: Refers to time management infotypes. The time constraint for these infotypes depends on the time constraint class defined in view V_T554S_I Absence: General Control. Collision checks are defined in view V_T554Y TimeConstraint Reaction.

  • Time constraint maintainance error

    hi, when I am trying to update the infotype 1002, after maintaining the relation between Position and Org Unit through RH_Relation_Maintain I am getting an error ' time constraint not found for S 1002 A003'.  I do not have the previliges to maintain new entries in T777Z either.
    any suggestions on how can I handle this would be helpful.

    Hi,
    Well, are you trying to do a batch input on infotype 0000? If yes you need to check that the proposed values respects the time constraint, meaning no gap, no overlaps and no inversions. Also fields SUBTY, OBJPS, SPRPS and SEQNR must remain initial when processing IT0000...
    Kr,
    Manu.

  • Archived redolog not applied in real-time : IN-MEMORY

    I created a DataGuard configuratiion in Oracle 11g so that the archived redolog are applied in real-time using the log writer.
    It seems to me that the last one is not applied : when consulting the v$archived_log table the last entry have the colunm applied to "IN-MEMORY" :
    select THREAD#, SEQUENCE#,APPLIED, deleted from v$archived_log;
    THREAD# SEQUENCE# APPLIED DEL
    1 1935 YES NO
    1 1936 IN-MEMORY NO
    The Oracle 11g documentation say that if "IN-MEMORY" that mean not applied in the datafile.
    Could someone help me to fix it ?
    Why the last archived redolog is always "IN-MEMORY" ? Is there a way to change it ?

    Please check the value of the column REGISTRAR and APPLIED for the logs in the standby database.
    standby database:
    select sequence#,registrar,applied from v$archived_log;
    If REGISTRAR = RFS and APPLIED = NO, then the log file has been received but has not yet been applied.
    If REGISTRAR = RFS and APPLIED = IN-MEMORY, then the log file has been applied in memory, but the datafiles have not yet been updated.
    If REGISTRAR = RFS and APPLIED = YES, then the log file has been applied and the datafiles have been updated.
    Try Cancelling the Managed Recovery Process and bounce the standby database

  • Lock/Key change not permitted( time constraint 1)

    Hello,
    Users are unable to change the Basic for an employee . When they change and try to save they get this error message"
    Lock/Key change not permitted( time constraint 1) ". what could be the reason for this , is this related to any authorization issue ? Please help

    Hi Sagar,
    This is not authroization issue.
    The change you are doing is not in the right time period. Please contact your HCM funtional consultant
    Remember all the changes in HR bounded by time period

  • Text not printing or PDFing. Non-printing is not applied. Help?

    I have a logo. The top is on a path applied to an oval. Same with the bottom. In the middle is an ampersand (&). When I try to print, only the ampersand prints. I've tried printing to 2 different machines. I also tried saving it as a PDF but I lose everything except the ampersand in the middle. Everything is colored black, so there are no weird colors going on. Non-printing is not applied to anything. Any thoughts? I can send the file to somebody if they want to check it out.
    ID CS 3
    Thanks,
    Chris

    Sorry for the delay. Spent some time looking for the font becasue I'm on Windows.
    I opened it first in CS5, and after font substitution it exported fine, so I figured maybe it was a font problem on your end, but just to be safe I opened it in CS3 to check. Same problem here that you have on your end.
    Good news, though. I exported to .inx and opened that. That page opened at 11 inches high, which may be part of the problem, but after resizing, it exported correctly. This is a pretty good inidcator of some minor corruption that is fixable by the export. See Remove minor corruption by exporting

  • Time Constraint Error when calling a Function module from Webdynpro ABAP

    Any help will be greatly appreciated - Thanks RM
    Time Constraint Error
    Information on where terminated
        Termination occurred in the ABAP program "SAPUP50R" - in
         "CHECK_TIME_CONSTRAINT_S1".
        The main program was "MP000000 ".
        In the source code you have the termination point in line 1069
        of the (Include) program "UP50RU01".
    Error occurred during batch input processing
    Source Code Extract
          l_is_inconsistent = 'X'.
        ENDIF.
      Check if there are inverted time periods.
        IF l_prelp_line-begda > l_prelp_line-endda.
          l_is_inconsistent = 'X'.
        ENDIF.
    Check if there are overlaps or gaps.
        IF NOT l_prelp_before IS INITIAL.
          l_date_difference = l_prelp_line-begda - l_prelp_before-endda.
          IF l_date_difference <> 1.
            l_is_inconsistent = 'X'.
          ENDIF.
        ENDIF.
        l_prelp_before = l_prelp_line.
      ENDLOOP.
      IF l_prelp_before-endda <> '99991231'.
        l_is_inconsistent = 'X'.
      ENDIF.
      IF l_is_inconsistent = 'X'.
        IF p_access_type = 'R'.
    490 Datenbankschiefstand Personalnummer & Infotyp &
          MESSAGE x490 WITH l_prelp_before-pernr l_prelp_before-infty.
        ELSE.
    491 Unzulässige Daten Personalnummer & Infotyp &
    Line 1069 Error occcurs >>>>  MESSAGE x491 WITH l_prelp_before-pernr l_prelp_before-infty.
        ENDIF.
      ENDIF.
    ENDFORM.                    " CHECK_TIME_CONSTRAINT_S1     "XYVN0352581
    *&      Form  clear_no_adapter_needed              new     "XREN844998
          text
    FORM clear_no_adapter_needed .
      CLEAR no_adapter_needed.
    ENDFORM.                    " clear_no_adapter_needed
    *&      Form  set_no_adapter_needed              new     "XREN844998
          text
    FORM set_no_adapter_needed .
      no_adapter_needed = 'X'.
    ENDFORM.                    " clear_no_adapter_needed

    Hi,
    Well, are you trying to do a batch input on infotype 0000? If yes you need to check that the proposed values respects the time constraint, meaning no gap, no overlaps and no inversions. Also fields SUBTY, OBJPS, SPRPS and SEQNR must remain initial when processing IT0000...
    Kr,
    Manu.

  • Sysprep unattend file not applying when image is captured with wds (no errors)

    So I've been around the block a bit using sysprep and wds.  Recently I've created a reference image with a virtualbox environment using windows 7 x64. I was succesfully able to create a reference image, sysprep it and capture it to the wds server. My
    plan there after was to create driver specific images for each model computer we use here after not having much success using the driver store (another story)
    Any how So I take my reference image and deploy it to a new computer... In this case an HP Probook 5310m.  Install any missing drivers and Sysprep it with the following command.  sysprep /generalize /oobe /unattend:unattend.xml /shutdown
    Below is the sysprep file I have been using
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
        <settings pass="generalize">
            <component name="Microsoft-Windows-Security-SPP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <SkipRearm>0</SkipRearm>
            </component>
            <component name="Microsoft-Windows-PnpSysprep" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <DoNotCleanUpNonPresentDevices>true</DoNotCleanUpNonPresentDevices>
                <PersistAllDeviceInstalls>true</PersistAllDeviceInstalls>
            </component>
        </settings>
        <settings pass="specialize">
            <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <SkipAutoActivation>true</SkipAutoActivation>
            </component>
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <ShowWindowsLive>false</ShowWindowsLive>
                <TimeZone>Eastern Standard Time</TimeZone>
                <CopyProfile>true</CopyProfile>
                <ProductKey>74fdj-7dtw8-q9mp9-ypth8-qb27y</ProductKey>
            </component>
        </settings>
        <settings pass="oobeSystem">
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <OEMInformation>
                    <Logo>c:\windows\system32\oemlogo.bmp</Logo>
                    <SupportHours>Regular Business Hrs (Overnight Support Provided)</SupportHours>
                    <SupportURL>url</SupportURL>
                    <SupportPhone>Phone number</SupportPhone>
                </OEMInformation>
                <OOBE>
                    <HideEULAPage>true</HideEULAPage>
                    <NetworkLocation>Work</NetworkLocation>
                    <ProtectYourPC>1</ProtectYourPC>
                    <HideWirelessSetupInOOBE>false</HideWirelessSetupInOOBE>
                </OOBE>
                <UserAccounts>
                    <LocalAccounts>
                        <LocalAccount wcm:action="add">
                            <Password>
                                <Value>TAAxAEQAMwBzAHQAcgBpACEAUABhAHMAcwB3AG8AcgBkAA==</Value>
                                <PlainText>false</PlainText>
                            </Password>
                            <Description>Local Administrator</Description>
                            <DisplayName>Root</DisplayName>
                            <Group>Administrators</Group>
                            <Name>Root</Name>
                        </LocalAccount>
                    </LocalAccounts>
                </UserAccounts>
                <TimeZone>Eastern Standard Time</TimeZone>
                <ShowWindowsLive>false</ShowWindowsLive>
                <FirstLogonCommands>
                    <SynchronousCommand wcm:action="add">
                        <Order>1</Order>
                        <CommandLine>slmgr.vbs /ipk {serial key}</CommandLine>
                    </SynchronousCommand>
                    <SynchronousCommand wcm:action="add">
                        <Order>2</Order>
                        <CommandLine>slmgr.vbs /ato</CommandLine>
                    </SynchronousCommand>
                </FirstLogonCommands>
            </component>
            <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <InputLocale>en-US</InputLocale>
                <SystemLocale>en-US</SystemLocale>
                <UILanguage>en-US</UILanguage>
                <UILanguageFallback>en-US</UILanguageFallback>
                <UserLocale>en-US</UserLocale>
            </component>
        </settings>
        <cpi:offlineImage cpi:source="catalog:v:/sources/install_windows 7 professional.clg" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    </unattend>
    The machine succesfully syspreps and shuts down. I restart the computer pxe boot and capture the image succesfully.
    Now here comes my problem...
    Upon deploying the above driver specific image.. my sysprep file is not applied.  Nothing from the OOBE wizard answers to the pc logo , or first logon commands are applied ... nothing.. I have gotten no errors during this whole process.  I have
    started to try to read the logs within the panther folder but havent gotten far.
    What is weird to me is that I have tried recreating this image... deploy the reference image... add drivers ... sysprep ...shutdown.  And if I boot normally (without capturing the image) the computer shows all of the sysprep changes..  Only when
    i capture the image does it not apply the changes....
    I'm stumped...
    Any ides?

    Confirm this scenario: You installed Windows, then ran sysprep and used the /unattend switch. Then you captured the image.
    In this scenario there are 2 deployment methods.
    1. If you deploy the image with DISM, the answer file generated by sysprep is detected on first boot and settings are applied. It is the same function as if you ran sysprep and chose to restart.
    2. If you deploy the image using Setup.exe, it does not use the answer file specified by sysprep prior to capturing. I have not looked into *why* this happens, but I suspect that after the image is applied, it replaces the unattend.xml with the generic one.
    If you are using Setup.exe, you need to use its /unattend switch and point to the answer file location. This location cannot be inside of the image. If you are not using setup.exe in a manual method (using WDS) you will need to apply the answer file to the
    install image in the WDS snap-in.

  • MDT 2013: bootstrap.ini not applying username and password for share access

    I customized my bootstrap.ini file to skip the welcome screen, set keyboard locale, and enter a service account username and password for share access.  The welcome screen skip and keyboard locale work beautifully but it's not applying the share username/password/domain
    at all.  
    bootstrap.ini: 
    [Settings]
    Priority=Default
    [Default]
    DeployRoot=\\mydeploymentserver\DeploymentShare$
    UserID=myuserid
    UserDomain=mydomain.com
    UserPassword=mypassword
    KeyboardLocale=en-US
    SkipBDDWelcome=YES
    I verified that the unattend.xml file on the MININT volume during deployment had all of this information populated correctly:
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
    <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <ImageInstall>
    <OSImage>
    <WillShowUI>OnError</WillShowUI>
    <InstallTo>
    <DiskID>0</DiskID>
    <PartitionID>2</PartitionID>
    </InstallTo>
    <InstallFrom>
    <Path>\\mydeploymentserver\deploymentshare$\Operating Systems\Windows 7 x64 with District Software - 06222014\Windows 7 x64 with District Software - 06222014.wim</Path>
    <MetaData>
    <Key>/IMAGE/INDEX</Key>
    <Value>1</Value>
    </MetaData>
    </InstallFrom>
    </OSImage>
    </ImageInstall>
    <Display>
    <ColorDepth>16</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <ComplianceCheck>
    <DisplayReport>OnError</DisplayReport>
    </ComplianceCheck>
    <UserData>
    <AcceptEula>true</AcceptEula>
    </UserData>
    </component>
    <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <SetupUILanguage>
    <UILanguage>en-US</UILanguage>
    </SetupUILanguage>
    <InputLocale>0409:00000409</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="generalize">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    </component>
    </settings>
    <settings pass="specialize">
    <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <Identification>
    <Credentials>
    <Username>myusername</Username>
    <Domain>mydomain.com</Domain>
    <Password>mypassword</Password>
    </Credentials>
    <JoinDomain>mydomain.com</JoinDomain>
    </Identification>
    </component>
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <ComputerName>eos-vm-02</ComputerName>
    <RegisteredOrganization>Regional School District 19</RegisteredOrganization>
    <RegisteredOwner>Information Technology</RegisteredOwner>
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    <TimeZone>Eastern Standard Time</TimeZone>
    </component>
    <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <Home_Page>http://www.eosmith.org</Home_Page>
    <DisableWelcomePage>true</DisableWelcomePage>
    <DisableFirstRunWizard>false</DisableFirstRunWizard>
    </component>
    <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <RunSynchronous>
    <RunSynchronousCommand wcm:action="add">
    <Description>EnableAdmin</Description>
    <Order>1</Order>
    <Path>cmd /c net user Administrator /active:yes</Path>
    </RunSynchronousCommand>
    <RunSynchronousCommand wcm:action="add">
    <Description>UnfilterAdministratorToken</Description>
    <Order>2</Order>
    <Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
    </RunSynchronousCommand>
    <RunSynchronousCommand wcm:action="add">
    <Description>disable user account page</Description>
    <Order>3</Order>
    <Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
    </RunSynchronousCommand>
    </RunSynchronous>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>en-US</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    <component name="Microsoft-Windows-TapiSetup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <TapiConfigured>0</TapiConfigured>
    <TapiUnattendLocation>
    <AreaCode>""</AreaCode>
    <CountryOrRegion>1</CountryOrRegion>
    <LongDistanceAccess>9</LongDistanceAccess>
    <OutsideAccess>9</OutsideAccess>
    <PulseOrToneDialing>1</PulseOrToneDialing>
    <DisableCallWaiting>""</DisableCallWaiting>
    <InternationalCarrierCode>""</InternationalCarrierCode>
    <LongDistanceCarrierCode>""</LongDistanceCarrierCode>
    <Name>Default</Name>
    </TapiUnattendLocation>
    </component>
    <component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DisableSR>1</DisableSR>
    </component>
    </settings>
    <settings pass="oobeSystem">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <UserAccounts>
    <AdministratorPassword>
    <Value>administratorpassword</Value>
    <PlainText>true</PlainText>
    </AdministratorPassword>
    </UserAccounts>
    <AutoLogon>
    <Enabled>true</Enabled>
    <Username>Administrator</Username>
    <Domain>.</Domain>
    <Password>
    <Value>administratorpassword</Value>
    <PlainText>true</PlainText>
    </Password>
    <LogonCount>999</LogonCount>
    </AutoLogon>
    <Display>
    <ColorDepth>32</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <FirstLogonCommands>
    <SynchronousCommand wcm:action="add">
    <CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
    <Description>Lite Touch new OS</Description>
    <Order>1</Order>
    </SynchronousCommand>
    </FirstLogonCommands>
    <OOBE>
    <HideEULAPage>true</HideEULAPage>
    <NetworkLocation>Work</NetworkLocation>
    <ProtectYourPC>1</ProtectYourPC>
    </OOBE>
    <RegisteredOrganization>Regional School District 19</RegisteredOrganization>
    <RegisteredOwner>Information Technology</RegisteredOwner>
    <TimeZone>Eastern Standard Time</TimeZone>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>en-US</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="offlineServicing">
    <component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DriverPaths>
    <PathAndCredentials wcm:keyValue="1" wcm:action="add">
    <Path>\Drivers</Path>
    </PathAndCredentials>
    </DriverPaths>
    </component>
    </settings>
    </unattend>
    ... and the bdd.log file appeared not to read the username and password at all:
    <![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives = C: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property LogPath is now = D:\MININT\SMSOSD\OSDLOGS]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property Debug is now = FALSE]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Cleaned up a dirty deployment.]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives = C: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[No task sequence is in progress.]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found Possible OS TargetDisk: \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[GetPartitions: 2]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found Possible OS Target Partition: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Target Partition not big enough: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found Possible OS Target Partition: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found Drive: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found FirstPossibleSystemDrive: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property SMSTSLocalDataDrive is now = D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Unable to connect to BCDStore.]LOG]!><time="05:03:43.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Not running within WinPE or WinRE.]LOG]!><time="05:03:43.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property DeploymentMethod is now = UNC]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[DeploymentMethod = UNC]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property DeployRoot is now = X:\Deploy]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Using a local or mapped drive, no connection is required.]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[DeployRoot = X:\Deploy]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property DeployDrive is now = X:]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[DeployDrive = X:]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property PHASE is now = PREINSTALL]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property DeploymentType is now = NEWCOMPUTER]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Phase = PREINSTALL]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[About to run command: wscript.exe "X:\Deploy\Scripts\ZTIGather.wsf" /inifile:Bootstrap.ini]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property inifile is now = Bootstrap.ini]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[------------------------- Object Initialization -------------------------]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[------------------------- Initialization -------------------------]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Synchronizing the environments.]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property DeployRoot is now = X:\Deploy]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property DeployDrive is now = X:]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished synchronizing the environments.]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting OS info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OSCurrentVersion is now = 6.3.9600]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OSCurrentBuild is now = 9600]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OSVersion is now = WinPE]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsServerOS is now = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsServerCoreOS is now = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting OS info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting HAL information]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property definition is now = BDD_Welcome_ENU.xml]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property HALName is now = acpiapic]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting HAL information]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting network info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Checking network adapter: [00000001] Intel(R) PRO/1000 MT Network Connection]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[MAC address = 00:50:56:85:38:B4]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[IP Address = 172.16.4.182]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[IP Address = fe80::c98:9fef:4305:51f0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Default Gateway = 172.16.4.1]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IPAddress001 is now = 172.16.4.182]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IPAddress002 is now = fe80::c98:9fef:4305:51f0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property MacAddress001 is now = 00:50:56:85:38:B4]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property DefaultGateway001 is now = 172.16.4.1]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting network info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting DP info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Unable to determine ConfigMgr distribution point]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting DP info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting WDS server info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Not Wizard = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WizardComplete is now = N]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WDSServer is now = mydeploymentserver.mydomain.com]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting WDS server info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property HostName is now = MININT-U1TGFAD]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting asset info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[FindFile: The file x86\Microsoft.BDD.Utility.dll could not be found in any standard locations.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[FindFile(...\Microsoft.BDD.Utility.dll) Result : 1]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[RUN: regsvr32.exe /s ""]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[FindFile(...\Microsoft.BDD.Utility.dll) Result : 0]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[RUN: regsvr32.exe /s "X:\Deploy\Tools\x64\Microsoft.BDD.Utility.dll"]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property AssetTag is now = No Asset Tag]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SerialNumber is now = VMware-42 05 2b f7 cd 5b 63 fd-83 8a 77 84 7c ed 79 05]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Make is now = VMware, Inc.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Model is now = VMware Virtual Platform]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Product is now = 440BX Desktop Reference Platform]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property UUID is now = F72B0542-5BCD-FD63-838A-77847CED7905]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Memory is now = 2047]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Architecture is now = X64]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property ProcessorSpeed is now = 2800]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property CapableArchitecture is now = AMD64 X64 X86]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsLaptop is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsDesktop is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsServer is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsUEFI is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsOnBattery is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsX86 is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsX64 is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsSLAT is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting asset info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting OS SKU info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Unable to determine Windows SKU while in Windows PE.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Determining the Disk and Partition Number from the Logical Drive X:\WINDOWS]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting virtualization info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsHypervisorRunning is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsVT is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsNX is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Supports64Bit is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsHyperVRole is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsVM is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property VMPlatform is now = VMware]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting virtualization info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Connection succeeded to MicrosoftVolumeEncryption]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[There are no encrypted drives]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsBDE is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Processing the PREINSTALL phase.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Determining the INI file to use.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished determining the INI file to use.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Using from [Settings]: Rule Priority = DEFAULT]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[------ Processing the [DEFAULT] section ------]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property DEPLOYROOT is now = \\mydeploymentserver\DeploymentShare$]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Using from [DEFAULT]: DEPLOYROOT = \\mydeploymentserver\DeploymentShare$]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[------ Done processing X:\Deploy\Scripts\Bootstrap.ini ------]LOG]!>

    Basics - Server 2008 R2 - SP1, WDS,  MDT 2013
    Well all, I've done this at least 20 times today and the deployment share info is still wrong...
    Someone else built and messed with this thing so i'm trying to fix it.  We have 2 MDT servers and 1 WDS that is on the Production MDT.  I've turned the test MDT off.
    It was working fine, until I updated the deployment share ... after adding some drivers for the surface pro 3 for the pxe boot
    Very Simple bootstrap.ini
    [Settings]
    Priority=Default
    [Default]
    DeployRoot=\\MMPDEPLOY02\DeploymentShare$
    UserID=xxx
    UserDomain=xxx
    UserPassword=xxx
    KeyboardLocale=en-US
    SkipBDDWelcome=YES
    It continues to show up on the client as ||mdt901w8|deploymentshare$  (test server) (pipes for \ since it makes it a link and i'm new)
    I've deleted all the .wim and associated files from all locations from the deployment share\boot folder and from the wds remote install\boot\x64\images folder where they are instead of the remote install\boot\images folder that everyone refers to.
    I really can't figure this one out... I know it's something simple I'm over looking but I can't see it..
    Any ideas..

  • UDI wizard is not applying TimeZone setting (MDT2013)

    Hi All,
    I am working on MDT2013 to create Windows7-64bit Image for OEM vendor. Note:- I am not using any SQL database.
    I have customized the UDIWizard_Config.xml where it should ask for UIlanguage, Inputlocale and Timezone. I am calling this UDI wizard xml in Tasksequence after gathering locally here the problem is after completing the build its not applying the Timezone
    setting in image.
    Any one aware about this issue? why UDI wizard is not applying the Timezone setting in image? 
    I have attached the below UDI wizard XML. please answer and ask if you require any more details..
    <?xml version="1.0" encoding="UTF-8"?>
    -<Wizard>
    -<DLLs>
    <DLL Name="OSDRefreshWizard.dll"/>
    <DLL Name="SharedPages.dll"/>
    </DLLs>
    -<Style>
    <Setter Property="bannerFilename">UDI_Wizard_Banner.bmp</Setter>
    <Setter Property="title">Operating System Deployment (OSD) Wizard</Setter>
    </Style>
    -<Pages>
    -<Page Name="WelcomePage" Type="Microsoft.SharedPages.WelcomePage" DisplayName="Welcome">
    -<Fields>
    -<Field Name="WelcomeText" Summary="" Enabled="true">
    <Default> Welcome to the Deployment Wizard. This wizard will walk you through a series of screens that will allow you to choose Language type. Click on the 'Next' button to start your selected language pack installalation. Please allow 1 hours for installation. If you need support during this process, please e-mail your system administrator. </Default>
    </Field>
    </Fields>
    </Page>
    -<Page Name="ConfigScanPage" Type="Microsoft.OSDRefresh.ConfigScanPage" DisplayName="Deployment Readiness">
    -<Tasks StatusTitle="Status" NameTitle="Configuration Check Name">
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Windows Scripting Host">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\OSDCheckWSH.vbs</Setter>
    <Setter Property="BitmapFilename">images\WinScriptHost.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Windows Scripting Host not installed." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.SharedPages.WiredNetworkTask" DisplayName="Wired Network Check">
    <Setter Property="BitmapFilename">images\WiredNetwork.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="No Wired connection found. Please plug in to a network cable." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.AppDiscoveryTask" DisplayName="Application Discovery">
    <Setter Property="readcfg">$LogPath$\OSDSetupWizard.xml.app</Setter>
    <Setter Property="writecfg">%temp%\AppDiscoveryresult.xml.app</Setter>
    <Setter Property="log">$LogPath$\AppDiscovery.log</Setter>
    <Setter Property="BitmapFilename">images\AppDiscovery.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="Successfully scanned applications." Value="0" State="Success"/>
    <ExitCode Type="1" Text="Could not run application discovery engine (reason unknown). The appropriate applications may not be selected." Value="*" State="Warning"/>
    <ExitCode Type="1" Text="One or more warnings were encountered (nonfatal) while running App Discovery. The appropriate applications may not be selected." Value="1" State="Warning"/>
    <ExitCode Type="1" Text="Critical problems were encountered while initializing App Discovery. The appropriate applications may not be selected." Value="16777216" State="Warning"/>
    <ExitCode Type="1" Text="Critical problems were encountered while processing the Application Master List. The appropriate applications may not be selected." Value="33554432" State="Warning"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Get Printers">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\OSD_GetPrinters.vbs /xmlout:%temp%\PrinterList.xml;$LogPath$\PrinterList.xml</Setter>
    <Setter Property="BitmapFilename">images\Printers.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="1" Text="Output filename not specified correctly." Value="10" State="Warning"/>
    <ExitCode Type="1" Text="Unable to create output file." Value="20" State="Warning"/>
    <ExitCode Type="1" Text="An unknown error has occurred." Value="*" State="Warning"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="CheckSMSFolderOnUSB">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\CheckSMSFolderOnUSB.vbs</Setter>
    <Setter Property="BitmapFilename">images\USB.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Please disconnect any USB Drives at this time, cancel the wizard, and start the task sequence over." Value="*" State="Error"/>
    <Error Type="-1" Text="The path not found" Value="2" State="Error"/>
    <Error Type="-1" Text="The file not found" Value="3" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.ACPowerTask" DisplayName="AC Power Check">
    <Setter Property="BitmapFilename">images\ACPower.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="No AC power detected. Please plug in to power." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Drive Encryption">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\OSDBitlockerState.vbs %systemdrive%</Setter>
    <Setter Property="BitmapFilename">images\bitlocker.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="1" Text="Drive is fully encrypted. Encryption will be paused during deployment and resumed." Value="1" State="Warning"/>
    <ExitCode Type="1" Text="Drive encryption is paused. Encryption will resume after deployment has completed." Value="4" State="Warning"/>
    <ExitCode Type="1" Text="Drive encryption is paused. Encryption will resume after deployment has completed." Value="5" State="Warning"/>
    <ExitCode Type="-1" Text="Drive is currently encrypting. Please fully encrypt or pause encryption to continue." Value="2" State="Error"/>
    <ExitCode Type="-1" Text="Drive is currently decrypting. Please fully decrypt or pause decryption to continue." Value="3" State="Error"/>
    <ExitCode Type="-1" Text="A script error was detected. Please contact support to continue." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    </Tasks>
    </Page>
    -<Page Name="ConfigScanBareMetal" Type="Microsoft.OSDRefresh.ConfigScanPage" DisplayName="Deployment Readiness">
    -<Tasks StatusTitle="Status" NameTitle="Configuration Check Name">
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Windows Scripting Host">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\OSDCheckWSH.vbs</Setter>
    <Setter Property="BitmapFilename">images\WinScriptHost.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Windows Scripting Host not installed." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.SharedPages.WiredNetworkTask" DisplayName="Wired Network Check">
    <Setter Property="BitmapFilename">images\WiredNetwork.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="No Wired connection found. Please plug in to a network cable." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.ACPowerTask" DisplayName="AC Power Check">
    <Setter Property="BitmapFilename">images\ACPower.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="No AC power detected. Please plug in to power." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.PrestageDriveLookupTask" DisplayName="OEMMedia Lookup">
    <Setter Property="BitmapFilename"/>
    -<ExitCodes>
    <ExitCode Type="0" Text="Success" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Error" Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.AppDiscoveryTask" DisplayName="Application Discovery">
    <Setter Property="readcfg">%OSDDataSourceDrive%\%OSDDataSourceDirectory%\AppDiscoveryresult.xml.app</Setter>
    <Setter Property="writecfg">%temp%\AppDiscoveryresult.xml.app</Setter>
    <Setter Property="log">$LogPath$\AppDiscovery.log</Setter>
    <Setter Property="BitmapFilename">images\AppDiscovery.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="Successfully scanned applications." Value="0" State="Success"/>
    <ExitCode Type="1" Text="Could not run application discovery engine (reason unknown). The appropriate applications may not be selected." Value="*" State="Warning"/>
    <ExitCode Type="0" Text="AppDiscovery exited with success as Application matching information is not available in Windows PE." Value="1" State="Success"/>
    <ExitCode Type="1" Text="Critical problems were encountered while initializing App Discovery. The appropriate applications may not be selected." Value="16777216" State="Warning"/>
    <ExitCode Type="1" Text="Critical problems were encountered while processing the Application Master List. The appropriate applications may not be selected." Value="33554432" State="Warning"/>
    </ExitCodes>
    </Task>
    </Tasks>
    </Page>
    -<Page Name="RebootPage" Type="Microsoft.OSDRefresh.RebootPage" DisplayName="Reboot">
    -<Fields>
    -<Field Name="RebootText" Summary="" Enabled="true">
    <Default> Your machine will now be rebooted. Click on the 'Finish' button to reboot. </Default>
    </Field>
    </Fields>
    </Page>
    -<Page Name="WelcomePageReplace" Type="Microsoft.SharedPages.WelcomePage" DisplayName="Welcome">
    -<Fields>
    -<Field Name="WelcomeText" Summary="" Enabled="true">
    <Default> Welcome to the Replace Wizard. This wizard will walk you through a series of screens that will allow you to customize your data and settings for USMT. After you have entered the information, the wizard will begin USMT. Click on the 'Next' button to start. Please allow 2 hours for USMT. If you need support during this process, please e-mail your system administrator. </Default>
    </Field>
    </Fields>
    </Page>
    -<Page Name="VolumePage" Type="Microsoft.OSDRefresh.VolumePage" DisplayName="Volume">
    -<Fields>
    <Field Name="Image" Summary="Image Selection:" Enabled="true" VarName="OSDImageIndex"/>
    -<Field Name="Volume" Summary="Volume:" Enabled="true">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">There are no volumes available for installing the OS.</Setter>
    </Validator>
    </Field>
    <Field Name="Directory" Summary="Windows Directory:" Enabled="true"/>
    <Field Name="Format" Summary="Format:" Enabled="true" VarName="OSDDiskPart"/>
    </Fields>
    <Setter Property="MinimumVolumeSize">10</Setter>
    <Setter Property="FormatWinPE">Partition and &format disk 0.</Setter>
    <Setter Property="FormatFullOS">&Clean the selected volume.</Setter>
    <Setter Property="FormatWinPEWarning">WARNING: Choosing this option will repartition and format disk 0!</Setter>
    <Setter Property="FormatFullOSWarning">WARNING: Choosing this option will delete all data on the target volume!</Setter>
    -<Data Name="ImageSelection">
    -<DataItem>
    <Setter Property="DisplayName">Windows 7 RTM (x86)</Setter>
    <Setter Property="Index">1</Setter>
    <Setter Property="Architecture">x86</Setter>
    <Setter Property="ImageName">Windows 7 RTM Images</Setter>
    </DataItem>
    </Data>
    </Page>
    -<Page Name="UserRestorePage" Type="Microsoft.OSDRefresh.UserStatePage" DisplayName="Select Target">
    -<Fields>
    <RadioGroup Name="LocationGroup" Locked="false"/>
    -<Field Name="TargetDrive" Enabled="true" VarName="">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">No target drive found. Please insert a valid USB drive and click the Refresh button.</Setter>
    </Validator>
    </Field>
    -<Field Name="NetworkLocation" Enabled="true" VarName="SMSConnectNetworkFolderPath">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">No valid network share.</Setter>
    </Validator>
    </Field>
    -<Field Name="Username" Summary="User:" Enabled="true" VarName="OSDUserStateKey">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
    <Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
    </Validator>
    </Field>
    -<Field Name="Password" Summary="" Enabled="true" VarName="OSDUserStateKeyPassword">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">Password is required. Please enter the password.</Setter>
    </Validator>
    </Field>
    <Field Name="NoDataRadio" Enabled="true" VarName=""/>
    <Field Name="LocalRadio" Enabled="true" VarName=""/>
    <Field Name="USBRadio" Enabled="true" VarName=""/>
    <Field Name="NetworkRadio" Enabled="true" VarName=""/>
    </Fields>
    <Setter Property="NetworkPassword"/>
    <Setter Property="NetworkUsername"/>
    <Setter Property="DataSourceText">Please select a location where user data will be captured and/or restored.</Setter>
    <Setter Property="Format">disable</Setter>
    <Setter Property="FormatPrompt">disable</Setter>
    <Setter Property="MinimumDriveSize">10</Setter>
    <Setter Property="State">Restore</Setter>
    <Setter Property="NetworkDrive">n:</Setter>
    <Data Name="Network"/>
    </Page>
    -<Page Name="ComputerPage" Type="Microsoft.OSDRefresh.ComputerPage" DisplayName="New Computer Details">
    -<Fields>
    -<RadioGroup Name="DomainGroup" Locked="false">
    <Default>Workgroup</Default>
    </RadioGroup>
    -<Field Name="ComputerName" Summary="Computer Name:" Enabled="true" VarName="OSDComputerName">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">The computer name is required. Please enter a computer name.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">The computer name is not valid. It either contains a character that isn't allowed, or is longer than 15 characters.</Setter>
    <Setter Property="NamedPattern">ComputerName</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.InvalidChars">
    <Setter Property="Message">One of the characters in the computer name is not valid.</Setter>
    <Setter Property="InvalidChars"/>
    </Validator>
    </Field>
    -<Field Name="DomainCombo" Enabled="true" VarName="OSDDomainName">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You must select a domain.</Setter>
    </Validator>
    </Field>
    <Field Name="DomainOUCombo" Enabled="true" VarName="OSDDomainOUName"/>
    -<Field Name="WorkgroupName" Summary="Workgroup:" Enabled="true" VarName="OSDWorkgroupName">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">The workgroup name must be between 1 and 15 characters long, and cannot contain any of these characters: " : ; | = + * ? < ></Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">The workgroup name must be between 1 and 15 characters long, and cannot contain any of these characters: " : ; | = + * ? < ></Setter>
    <Setter Property="NamedPattern">Workgroup</Setter>
    </Validator>
    </Field>
    -<Field Name="Username" Summary="Join Domain Account:" Enabled="true" VarName="OSDJoinAccount">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
    <Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
    </Validator>
    </Field>
    -<Field Name="Password" Summary="" Enabled="true" VarName="OSDJoinPassword">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">Password is required. Please enter the password.</Setter>
    </Validator>
    </Field>
    </Fields>
    <Setter Property="ADCredentialCheck" Type="boolean">true</Setter>
    <Setter Property="ADComputerObjectCheck" Type="boolean">true</Setter>
    <Setter Property="UseExistingComputerName" Type="boolean">false</Setter>
    <Data Name="Domain"/>
    </Page>
    -<Page Name="AdminAccounts" Type="Microsoft.SharedPages.AdminAccountsPage" DisplayName="Administrator Password">
    -<Fields>
    -<Field Name="Username" Summary="Add as Administrator:" Enabled="true" VarName="OSDAddAdmin">
    <Default>%OSDJoinAccount%</Default>
    -<Validator Type="Microsoft.Wizard.Validation.InvalidChars">
    <Setter Property="Message">One of the characters in the Account Name(s) field is not valid.</Setter>
    <Setter Property="InvalidChars">/[]:|=,+*<>?"</Setter>
    </Validator>
    </Field>
    -<Field Name="Password" Summary="" Enabled="true" VarName="OSDLocalAdminPassword">
    <Default/>
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">Password is required. Please enter the password.</Setter>
    </Validator>
    </Field>
    </Fields>
    </Page>
    -<Page Name="UDAPage" Type="Microsoft.OSDRefresh.UDAPage" DisplayName="User Device Affinity">
    -<Fields>
    -<Field Name="DeviceAfinity" Summary="" Enabled="true">
    <Default>false</Default>
    </Field>
    -<Field Name="Username" Summary="User Device Affinity Account:" Enabled="true" VarName="SMSTSUdaUsers">
    <Default>%OSDJoinAccount%</Default>
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
    <Setter Property="Pattern">^([A-Za-z0-9-]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
    </Validator>
    </Field>
    <Field Name="Password" Enabled="true"/>
    </Fields>
    </Page>
    -<Page Name="LanguagePage" Type="Microsoft.OSDRefresh.LanguagePage" DisplayName="Language">
    -<Fields>
    -<Field Name="LanguagePack" Summary="Language Pack:" Enabled="true" VarName="UILanguage">
    <Default>DE-DE</Default>
    </Field>
    -<Field Name="InputLocale" Summary="Locale:" Enabled="true" VarName="UserLocale">
    <Default>en-US</Default>
    </Field>
    -<Field Name="KeyboardLocale" Summary="Keyboard Locale:" Enabled="true" VarName="KeyboardLocale">
    <Default>00000409</Default>
    </Field>
    -<Field Name="TimeZone" Summary="Time Zone:" Enabled="true" VarName="OSDTimeZone">
    <Default>Pacific Standard Time</Default>
    </Field>
    </Fields>
    -<Data Name="LanguagePacks">
    -<DataItem>
    <Setter Property="DisplayName">English (United States)</Setter>
    <Setter Property="Language">EN-US</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Chinese (Hong Kong S.A.R.)</Setter>
    <Setter Property="Language">ZH-HK</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">German (Germany)</Setter>
    <Setter Property="Language">DE-DE</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Japanese (Japan)</Setter>
    <Setter Property="Language">JA-JP</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Polish (Poland)</Setter>
    <Setter Property="Language">PL-PL</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Romanian (Romania)</Setter>
    <Setter Property="Language">RO-RO</Setter>
    </DataItem>
    </Data>
    </Page>
    -<Page Name="ApplicationPage" Type="Microsoft.OSDRefresh.ApplicationPage" DisplayName="Install Programs">
    <Setter Property="Link.Uri">%temp%\AppDiscoveryresult.xml.app</Setter>
    <Setter Property="TsAppBaseVariable">PACKAGES</Setter>
    <Setter Property="TsApplicationBaseVariable">APPLICATIONS</Setter>
    <Setter Property="TsWindowsAppPackageAppBaseVariable">WINDOWSAPPPACKAGEAPPS</Setter>
    <Setter Property="TsAppInstall">AppInstall</Setter>
    </Page>
    <Page Name="SummaryPage" Type="Microsoft.Shared.SummaryPage" DisplayName="Summary"/>
    -<Page Name="UserCapturePageOldPC" Type="Microsoft.OSDRefresh.UserStatePage" DisplayName="Select Target">
    -<Fields>
    <RadioGroup Name="LocationGroup" Locked="false"/>
    -<Field Name="TargetDrive" Enabled="true" VarName="">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">No target drive found. Please insert a valid USB drive and click the Refresh button.</Setter>
    </Validator>
    </Field>
    -<Field Name="NetworkLocation" Enabled="true" VarName="SMSConnectNetworkFolderPath">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">No valid network share.</Setter>
    </Validator>
    </Field>
    -<Field Name="Username" Summary="User:" Enabled="true" VarName="OSDUserStateKey">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
    <Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
    </Validator>
    </Field>
    -<Field Name="Password" Summary="" Enabled="true" VarName="OSDUserStateKeyPassword">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">Password is required. Please enter the password.</Setter>
    </Validator>
    </Field>
    <Field Name="NoDataRadio" Enabled="false" VarName=""/>
    <Field Name="LocalRadio" Enabled="false" VarName=""/>
    <Field Name="USBRadio" Enabled="true" VarName=""/>
    <Field Name="NetworkRadio" Enabled="true" VarName=""/>
    </Fields>
    <Setter Property="NetworkPassword"/>
    <Setter Property="NetworkUsername"/>
    <Setter Property="DataSourceText">Please select a location where user data will be captured.</Setter>
    <Setter Property="Format">disable</Setter>
    <Setter Property="FormatPrompt">disable</Setter>
    <Setter Property="MinimumDriveSize">10</Setter>
    <Setter Property="State">Capture</Setter>
    <Setter Property="NetworkDrive">n:</Setter>
    <Data Name="Network"/>
    </Page>
    -<Page Name="ProgressPage" Type="Microsoft.OSDRefresh.ProgressPage" DisplayName="Capture Data">
    <Setter Property="LogFilename">$LogPath$\USMTcapture.prg</Setter>
    -<Tasks StatusTitle="Status" NameTitle="Task Name">
    -<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy AppDiscovery XML">
    <File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\AppDiscoveryresult.xml.app"/>
    <Setter Property="BitmapFilename">images\copy.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Copy failed." Value="*" State="Error"/>
    <Error Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy Printers XML">
    <File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\PrinterList.xml"/>
    <Setter Property="BitmapFilename">images\Printers.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy ProductsList">
    <File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\ProductsInstalled.txt"/>
    <Setter Property="BitmapFilename">images\copy.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Copy failed." Value="*" State="Error"/>
    <Error Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Run USMT">
    <Setter Property="BitmapFilename">images\usmt.bmp</Setter>
    <Setter Property="filename">%windir%\system32\wscript.exe</Setter>
    <Setter Property="parameters">//B %ScriptRoot%\ZTIUserState.wsf /capture /OSDStateStorePath:$DriveLetter$\%OSDDataSourceDirectory% /UserDataKey:%OSDUserStateKeyPassword%</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="USMT scan state failed." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    </Tasks>
    </Page>
    -<Page Name="RebootAfterCapture" Type="Microsoft.OSDRefresh.RebootPage" DisplayName="Reboot">
    -<Fields>
    -<Field Name="RebootText" Summary="" Enabled="true">
    <Default> Your machine will now be rebooted. Click on the 'Finish' button to reboot. </Default>
    </Field>
    </Fields>
    </Page>
    -<Page Name="BitLocker" Type="Microsoft.OSDRefresh.BitLockerPage" DisplayName="BitLocker">
    -<Fields>
    <!-- Valid values: TPM,TPMPIN,TPMKey and ExternalKey-->
    -<RadioGroup Name="BitLockerRadioGroup" Locked="false">
    <Default>TPMPIN</Default>
    </RadioGroup>
    -<RadioGroup Name="LocationGroup" Locked="false">
    <Default>AD</Default>
    </RadioGroup>
    -<Field Name="BitLocker" Summary="" Enabled="true" VarName="BDEInstallSuppress">
    <Default>True</Default>
    </Field>
    -<Field Name="PIN" Summary="" Enabled="true" VarName="BDEPIN">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">The PIN must not be emtpy</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">PIN should be a number between 4-20 digits</Setter>
    <Setter Property="Pattern">^[0-9-]{4,20}$</Setter>
    </Validator>
    </Field>
    -<Field Name="WaitForEncryption" Summary="" Enabled="true" VarName="OSDBitlockerWaitForEncryption">
    <Default>True</Default>
    </Field>
    </Fields>
    <Setter Property="KeyLocation"/>
    </Page>
    -<Page Name="Build Type" Type="Microsoft.Wizard.CustomPage" DisplayName="Build Type">
    -<Fields>
    -<Field Name="label3" Summary="" Enabled="true" VarName="">
    <Default>Choose Language Type</Default>
    </Field>
    -<RadioGroup Name="Group1" Summary="ABBLan" Enabled="true" VarName="ABBLang" Locked="false">
    <Default>radiobutton1</Default>
    </RadioGroup>
    -<Field Name="combo5" Summary="ABBLang" Enabled="true" VarName="ABBLang">
    <Default>English</Default>
    </Field>
    </Fields>
    -<Data Name="CustomFields">
    -<DataItem>
    <Setter Property="ControlType">label</Setter>
    <Setter Property="ID">3</Setter>
    <Setter Property="X">37.27</Setter>
    <Setter Property="Y">3.67</Setter>
    <Setter Property="Width">100</Setter>
    <Setter Property="Height">12</Setter>
    <Setter Property="Name">label3</Setter>
    <Setter Property="Label">Choose Language Type</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="ControlType">combo</Setter>
    <Setter Property="ID">5</Setter>
    <Setter Property="X">36.87</Setter>
    <Setter Property="Y">21.25</Setter>
    <Setter Property="Width">100</Setter>
    <Setter Property="Height">12</Setter>
    <Setter Property="Name">combo5</Setter>
    </DataItem>
    </Data>
    -<Data Name="combo5">
    -<DataItem>
    <Setter Property="DisplayName">English</Setter>
    <Setter Property="Value">0</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Chinese</Setter>
    <Setter Property="Value">1</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Japanese</Setter>
    <Setter Property="Value">2</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">German</Setter>
    <Setter Property="Value">3</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-2</Setter>
    <Setter Property="Value">4</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-3</Setter>
    <Setter Property="Value">5</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-4</Setter>
    <Setter Property="Value">6</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-5</Setter>
    <Setter Property="Value">7</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-6</Setter>
    <Setter Property="Value">8</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-7</Setter>
    <Setter Property="Value">9</Setter>
    </DataItem>
    </Data>
    </Page>
    </Pages>
    -<StageGroups>
    -<StageGroup DisplayName="New Computer">
    -<Stage Name="NEWCOMPUTER" DisplayName="New Computer">
    <PageRef Page="WelcomePage"/>
    <PageRef Page="LanguagePage"/>
    <PageRef Page="SummaryPage"/>
    </Stage>
    -<Stage Name="NEWCOMPUTER.Prestaged" DisplayName="New Computer (prestaged media)">
    <PageRef Page="WelcomePage"/>
    <PageRef Page="BitLocker"/>
    <PageRef Page="UserRestorePage"/>
    <PageRef Page="ConfigScanBareMetal"/>
    <PageRef Page="ComputerPage"/>
    <PageRef Page="AdminAccounts"/>
    <PageRef Page="UDAPage"/>
    <PageRef Page="LanguagePage"/>
    <PageRef Page="ApplicationPage"/>
    <PageRef Page="SummaryPage"/>
    </Stage>
    </StageGroup>
    -<StageGroup DisplayName="Refresh">
    -<Stage Name="REFRESH" DisplayName="Refresh">
    <PageRef Page="WelcomePage"/>
    <PageRef Page="VolumePage"/>
    <PageRef Page="UserRestorePage"/>
    <PageRef Page="ConfigScanPage"/>
    <PageRef Page="ComputerPage"/>
    <PageRef Page="AdminAccounts"/>
    <PageRef Page="LanguagePage"/>
    <PageRef Page="ApplicationPage"/>
    <PageRef Page="SummaryPage"/>
    </Stage>
    </StageGroup>
    -<StageGroup DisplayName="Replace">
    -<Stage Name="REPLACE" DisplayName="Replace, in full OS">
    <PageRef Page="WelcomePageReplace"/>
    <PageRef Page="ConfigScanPage"/>
    <PageRef Page="RebootPage"/>
    </Stage>
    -<Stage Name="REPLACE.WinPE" DisplayName="Replace, in WinPE">
    <PageRef Page="UserCapturePageOldPC"/>
    <PageRef Page="ProgressPage"/>
    <PageRef Page="RebootAfterCapture"/>
    </Stage>
    </StageGroup>
    </StageGroups>
    </Wizard>

    I don't know much about the UDI but I think the FieldName should be TimeZoneName and not just TimeZone.

  • SQL Server 2008 R2 Replication - not applying snapshot and not updating all repliacted columns

    We are using transactional replicating on SQL Server 2008 R2 (SP1) using a remote distributor. We are replicating from BaanLN, which is an ERP application to up to 5 subscribers, all using push publications. 
    Tables can range from a couple million rows to 12 million rows and 100's of GBs in size. 
    And it's due to the size of the tables that it was designed with a one publisher to one table architecture.  
    Until recently it has been working very smooth (last four years)) but we have come across two issues I have never encountered.
    While this has happen a half dozen times before, it last occurred a couple weeks ago when I was adding three new publications, again a one table per publication architecture.
    We use standard SS repl proc calls to create the publications, which have been successful for years. 
    On this occasion replication created the three publications, assigned the subscribers and even generated the new snapshot for all three new publications. 
    However,  while it appeared that replication had created all the publications correctly from end to end, it actually only applied one of the three snapshot and created the new table on both of the new subscribers (two on each of the
    publications).  It only applied the snapshot to one of the two subscribers for the second publications, and did not apply to any on the third.  
    I let it run for three hours to see if it was a back log issue. 
    Replication was showing commands coming across when looking at the sync verification at the publisher and 
    it would even successfully pass a tracer token through each of the three new publications, despite there not being tables on either subscriber on one of the publishers and missing on one of the subscribers on another.  
    I ended up attempting to reinitialize roughly a dozen times, spanning a day, and one of the two remaining publications was correctly reinitialized and the snapshot applied, but the second of the two (failed) again had the same mysterious result, and
    again looked like it was successful based on all the monitoring. 
    So I kept reinitializing the last and after multiple attempts spanning a day, it too finally was built correctly.  
    Now the story only get a little stranger.  We just found out yesterday that on Friday the 17th 
    at 7:45, the approximate time started the aforementioned deployment of the three new publications, 
    we also had three transaction from a stable and vetted publication send over all changes except for a single status column. 
    This publication has 12 million rows and is very active, with thousands of changes daily. 
    , The three rows did not replicate a status change from a 5 to a 6. 
    We verified that the status was in fact 6 on the publisher, and 
    5 on both subscribers, yet no messages or errors.  All the other rows successfully updated.  
    We fixed it by updating the publication from 6 back to 5 then back to 6 again on those specific rows and it worked.
    The CPU is low and overall latency is minimal on the distributor. 
    From all accounts the replication is stable and smooth, but very busy. 
    The issues above have only recently started.  I am not sure where to look for a problem, and to that end, a solution.

    I suspect the problem with the new publication/subscriptions not initializing may have been a result of timeouts but it is hard to say for sure.  The fact that it eventually succeeded after multiple attempts leads me to believe this.  If this happens
    again, enable verbose agent logging for the Distribution Agent to see if you are getting query timeouts.  Add the parameters
    -OutputVerboseLevel 2 -Output C:\TEMP\DistributionAgent.log to the Distribution Agent Run Agent job step, rerun the agent, and collect the log.
    If you are getting query timeouts, try increasing the Distribution Agent -QueryTimeOut parameter.  The default is 1800 seconds.  Try bumping this up to 3600 seconds.
    Regarding the three transactions not replicating, inspect MSrepl_errors in the distribution database for the time these transactions occurred and see if any errors occurred.
    Brandon Williams (blog |
    linkedin)

  • I have one problem with Data Guard. My archive log files are not applied.

    I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
    I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
    In Enterprise Manager on Primary database it looks ok. I get the following message “Data Guard status Normal”
    But as I wrote above ”the archive log files are not applied”
    After I created the Physical Standby database, I have also done:
    1. I connected to the Physical Standby database instance.
    CONNECT SYS/SYS@luda AS SYSDBA
    2. I started the Oracle instance at the Physical Standby database without mounting the database.
    STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
    3. I mounted the Physical Standby database:
    ALTER DATABASE MOUNT STANDBY DATABASE
    4. I started redo apply on Physical Standby database
    alter database recover managed standby database disconnect from session
    5. I switched the log files on Physical Standby database
    alter system switch logfile
    6. I verified the redo data was received and archived on Physical Standby database
    select sequence#, first_time, next_time from v$archived_log order by sequence#
    SEQUENCE# FIRST_TIME NEXT_TIME
    3 2006-06-27 2006-06-27
    4 2006-06-27 2006-06-27
    5 2006-06-27 2006-06-27
    6 2006-06-27 2006-06-27
    7 2006-06-27 2006-06-27
    8 2006-06-27 2006-06-27
    7. I verified the archived redo log files were applied on Physical Standby database
    select sequence#,applied from v$archived_log;
    SEQUENCE# APP
    4 NO
    3 NO
    5 NO
    6 NO
    7 NO
    8 NO
    8. on Physical Standby database
    select * from v$archive_gap;
    No rows
    9. on Physical Standby database
    SELECT MESSAGE FROM V$DATAGUARD_STATUS;
    MESSAGE
    ARC0: Archival started
    ARC1: Archival started
    ARC2: Archival started
    ARC3: Archival started
    ARC4: Archival started
    ARC5: Archival started
    ARC6: Archival started
    ARC7: Archival started
    ARC8: Archival started
    ARC9: Archival started
    ARCa: Archival started
    ARCb: Archival started
    ARCc: Archival started
    ARCd: Archival started
    ARCe: Archival started
    ARCf: Archival started
    ARCg: Archival started
    ARCh: Archival started
    ARCi: Archival started
    ARCj: Archival started
    ARCk: Archival started
    ARCl: Archival started
    ARCm: Archival started
    ARCn: Archival started
    ARCo: Archival started
    ARCp: Archival started
    ARCq: Archival started
    ARCr: Archival started
    ARCs: Archival started
    ARCt: Archival started
    ARC0: Becoming the 'no FAL' ARCH
    ARC0: Becoming the 'no SRL' ARCH
    ARC1: Becoming the heartbeat ARCH
    Attempt to start background Managed Standby Recovery process
    MRP0: Background Managed Standby Recovery process started
    Managed Standby Recovery not using Real Time Apply
    MRP0: Background Media Recovery terminated with error 1110
    MRP0: Background Media Recovery process shutdown
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[1]: Assigned to RFS process 2148
    RFS[1]: Identified database type as 'physical standby'
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[2]: Assigned to RFS process 2384
    RFS[2]: Identified database type as 'physical standby'
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[3]: Assigned to RFS process 3188
    RFS[3]: Identified database type as 'physical standby'
    Primary database is in MAXIMUM PERFORMANCE mode
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[3]: No standby redo logfiles created
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[4]: Assigned to RFS process 3168
    RFS[4]: Identified database type as 'physical standby'
    RFS[4]: No standby redo logfiles created
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[3]: No standby redo logfiles created
    10. on Physical Standby database
    SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
    PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    RFS IDLE 0 0 0 0
    RFS IDLE 0 0 0 0
    RFS IDLE 1 9 13664 2
    RFS IDLE 0 0 0 0
    10) on Primary database:
    select message from v$dataguard_status;
    MESSAGE
    ARC0: Archival started
    ARC1: Archival started
    ARC2: Archival started
    ARC3: Archival started
    ARC4: Archival started
    ARC5: Archival started
    ARC6: Archival started
    ARC7: Archival started
    ARC8: Archival started
    ARC9: Archival started
    ARCa: Archival started
    ARCb: Archival started
    ARCc: Archival started
    ARCd: Archival started
    ARCe: Archival started
    ARCf: Archival started
    ARCg: Archival started
    ARCh: Archival started
    ARCi: Archival started
    ARCj: Archival started
    ARCk: Archival started
    ARCl: Archival started
    ARCm: Archival started
    ARCn: Archival started
    ARCo: Archival started
    ARCp: Archival started
    ARCq: Archival started
    ARCr: Archival started
    ARCs: Archival started
    ARCt: Archival started
    ARCm: Becoming the 'no FAL' ARCH
    ARCm: Becoming the 'no SRL' ARCH
    ARCd: Becoming the heartbeat ARCH
    Error 1034 received logging on to the standby
    Error 1034 received logging on to the standby
    LGWR: Error 1034 creating archivelog file 'luda'
    LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
    FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
    11)on primary db
    select name,sequence#,applied from v$archived_log;
    NAME SEQUENCE# APP
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
    Luda 4 NO
    Luda 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
    Luda 5 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
    Luda 6 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
    Luda 7 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
    Luda 8 NO
    12) on standby db
    select name,sequence#,applied from v$archived_log;
    NAME SEQUENCE# APP
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
    13) my init.ora files
    On standby db
    irina.__db_cache_size=79691776
    irina.__java_pool_size=4194304
    irina.__large_pool_size=4194304
    irina.__shared_pool_size=75497472
    irina.__streams_pool_size=0
    *.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
    *.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
    *.compatible='10.2.0.1.0'
    *.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
    *.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_multiblock_read_count=16
    *.db_file_name_convert='luda','irina'
    *.db_name='irina'
    *.db_unique_name='luda'
    *.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
    *.db_recovery_file_dest_size=2147483648
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
    *.fal_client='luda'
    *.fal_server='irina'
    *.job_queue_processes=10
    *.log_archive_config='DG_CONFIG=(irina,luda)'
    *.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
    *.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='ENABLE'
    *.log_archive_max_processes=30
    *.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
    *.open_cursors=300
    *.pga_aggregate_target=16777216
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=167772160
    *.standby_file_management='AUTO'
    *.undo_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    *.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
    On primary db
    irina.__db_cache_size=79691776
    irina.__java_pool_size=4194304
    irina.__large_pool_size=4194304
    irina.__shared_pool_size=75497472
    irina.__streams_pool_size=0
    *.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
    *.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
    *.compatible='10.2.0.1.0'
    *.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
    *.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_multiblock_read_count=16
    *.db_file_name_convert='luda','irina'
    *.db_name='irina'
    *.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
    *.db_recovery_file_dest_size=2147483648
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
    *.fal_client='irina'
    *.fal_server='luda'
    *.job_queue_processes=10
    *.log_archive_config='DG_CONFIG=(irina,luda)'
    *.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
    *.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='ENABLE'
    *.log_archive_max_processes=30
    *.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
    *.open_cursors=300
    *.pga_aggregate_target=16777216
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=167772160
    *.standby_file_management='AUTO'
    *.undo_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    *.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
    Please help me!!!!

    Hi,
    After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
    Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
    In another session 'show configuration' results in the following, confirming that the enable succeeded.
    DGMGRL> show configuration
    Configuration
    Name: avhtest
    Enabled: YES
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    avhtest - Primary database
    avhtestls53 - Physical standby database
    Current status for "avhtest":
    Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
    It there anybody that experienced the same problem and/or knows the solution to this?
    With kind regards,
    Martin Schaap

Maybe you are looking for

  • New TO VDI. Can VDI be deployed on Desktop?

    Hi all, I am new to Virtual Desktop Hosting (actually, besides the general idea, I don't know much else). I know my University uses Citrix and I was wondering if I could implement a similar setup for my home. Basically I do all the administration at

  • Help for Final Cut Pro X training book.

    Hello everyone! I've recently decided to study to get the Apple Certification for Final Cut Pro X level 1, so I bought the book "Apple Pro Training Series: Final Cut Pro X" by Diana Weynand. Due to a mistake of mine, I bought the edition released on

  • Automatic TO not working

    Dear all, I am configuring automatic TO for movement type 541. In IMG>Activities> Movement types. I have set 541 for automatic TO and also in the delivery  i can see the warehouse in Picking and WMTA output type. I still cant get the TO created autom

  • How to degub the module pool program

    Hi friends, could anyone tell me "How to degub the module pool program"...!! Thanks in advance..!!

  • Accidental i photo application removal

    I had an alias problem with iphoto. There were at least three iphoto icon applications on my pictures folder. Never knew how the others got there. When I deleted the alias' iphoto applications the iphoto application was deleted as well. Luckily I was