ISync use with specific update conduits

I am trying to decide whether or not to move to iSync with my Palm TX in order to gain iCal synchronization. My question is this: I use an online service which auto-updates a database at each sync. It is Epocrates, a clinical pharmacology database which is widely used in the medical community. As I started to set up iSync, it asked me whether it could disable many of my Palm conduits - which I fear will disable the auto-update feature of Epocrates. This may be too specific a question to get an educated answer on, so the second part is this: If I go ahead and try it and the auto-update fails, what is the process to re-enable the older conduits and undo whatever iSync did? If the process is an arduous one, I will skip it and wait until I upgrade to blackberry this year, which apparently has its own software for sync.

When you Enable Palm OS Syncing… in iSync and install the bundled iSync Palm Conduit, the following Palm standard conduits are disabled:
• Address Conduit
• Calendar Conduit
• Contacts Conduit
• Datebook Conduit
• Tasks Conduit
• ToDo Conduit
This is because the iSync Palm Conduit, which synchronizes contacts with the Address Book and events and tasks with iCal, 'conflicts' with these standard conduits.
Also disabled by the installer are…
• Memo Conduit
• Memos Conduit
Just 'cause. Seriously. An engineer got a little overzealous early in the life of iSync, and this non-issue has never been addressed. But, the fix is simple: drag these two conduits from the Disabled Conduits folder back into the active Conduits folder, and memo synchronization with the Palm Desktop is restored.
A similar process restores Palm Desktop synchronization. Simply drag the iSync Palm Conduit into the Disabled Conduits folder, and the original six 'conflicting' conduits listed above from it to the active Conduits folder, and Palm Desktop synchronization is restored.
And, with that, you're back to the point before you enabled the iSync Palm Conduit.

Similar Messages

BP extend : how to use FM to update customer specific fields ?

Hello
I'm working on a CRM 2007 project and for customer needs, the BP data have been extent with specific fields using EEWB. So specific FMs have been automatically generated to manage the specific data. We want to use these FM to maintain the values of the specific fields. In the EEWB transaction, in the Task BUPA_API for the specific object, 2 FMs have been generated : ZZ1XO_BUPA_MAINTAIN and ZZ1XO_BUPA_MNTN_ALL : we suppose we have to use these FMs to update the values fo this object. This object (customer specific data) is time dependent with gaps and multiple instance. We tried to use these 2 FMs to update values but it does not work : anybody has already used this kind of FMs ?
Thanks to all.

Jerome,
Normally I use the FM modules generated by the EEWB that contain API to update the data. However keep in mind if this is a Z-Table and you don't like what is provided, then add your own BAPI modules to the BDT function group to update the data.
Take care,
Stephen

PlayReady failure with specific OS version of Windows 8.1 Update

Hello,
I'm observing a failure in my app during Smooth Streaming video playback using PlayReady DRM. The app is a WinJS Universal App solution for Windows Store and Windows Phone, using the latest updates for Visual Studio 2013, Update 4.
So far, the failure is limited to one specific version of the Windows 8.1 Update. I have two identical devices, both retail versions of the phone, that demonstrate this issue. Note, these same phones that fail with PlayReady can successfully
stream unprotected Smooth Streaming content.
My other five Windows Phone devices, with different OS version numbers, do not demonstrate the failure with the identical app installed. Therefore, I suspect the OS version may be the cause.
Failure description:
When I attempt to stream PlayReady protected Smooth Streaming video, the player initializes the media player and the MediaProtectionManager, but then displays the error state (The video failed to play. Try again.) immediately, and the following message is
displayed in Visual Studio:
MEDIA12899: AUDIO/VIDEO: Unknown MIME type.
--- Message: MEDIA_ERR_SRC_NOT_SUPPORTED (0x887A0004)
Summary of tested OS versions:
Windows Phone 8.1 Update
8.10.14141.167, untested
8.10.14147.180, untested
8.10.14157.200, untested
8.10.14176.243, NOKIA Lumia 830, fails to stream, tested with two devices
8.10.14192.280, untested
8.10.14203.206, HTC HTC6995LVW, streams successfully
8.10.14219.341, NOKIA Lumia 920, streams successfully
8.10.14226.359, BLU WIN HD W510u, streams successfully
Windows Phone 8.1
8.10.12359.845, untested
8.10.12382.878, untested
8.10.12393.890, NOKIA Lumia 920, streams successfully
8.10.12397.895, untested
8.10.12400.899, NOKIA Lumia 530, streams successfully
Note, one of OS versions I've tested fails to stream the PlayReady protected Smooth Streaming content, and five other OS versions I've tested successfully stream the same video content.
Is this a known issue with a specific version(s) of Windows Phone 8.1?
Regards,
Andrew

Hello,
0x887A0004 equates to DXGI_ERROR_UNSUPPORTED. This error is usually generated when you are trying to use Direct3D features that are not supported. Different devices support different D3D features since they contain different video hardware. It is possible
that a hardware feature that is required by the license is not supported in the hardware / driver of the device. I would recommend that you check the license and make sure that it does not contain any hardware specific requirements such as HDCP.
In other words try playing content with the least restrictive license and see if it works for you.
I hope this helps,
James
Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/

'Missing select' error for update statement using WITH clause

Hi,
I am getting the below error for update statement using WITH clause
SQL Error: ORA-00928: missing SELECT keyword
UPDATE A
set A.col1 = 'val1'
     where
A.col2 IN (
WITH D AS
SELECT col2 FROM
(SELECT col2, MIN(datecol) col3 FROM DS
WHERE <conditions>
    GROUP BY PATIENT) D2
WHERE
<conditions on A.col4 and D2.col3>

Hi,
The format of a query using WITH is:
WITH d AS
    SELECT ... -- sub_query
SELECT ...   -- main query
You don't have a main query. The keyword FROM has to come immediately after the right ')' that ends the last WITH clause sub-query.
That explains the problem based on what you posted. I can't tell if the real problem is in the conditions that you didn't post.
I hope this answers your question.
If not, post a complete test script that people can run to re-create the problem and test their ideas. Include a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
In the case of a DML operation (such as UPDATE) the sample data should show what the tables are like before the DML, and the results will be the contents of the changed table(s) after the DML.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

Generic extractor based on specific function module with delta update

Hi everybody,
I'm trying to create a specific extractor using a specific function module and a specific structure of record.
In my F.M i merge record from standard table MKPF and MSEg and return the result trhu the structure.
In initialisation mode, there's no problem . But now i'm must be able to use the DELTA mode but i don't know how to do it.
Can somebody help me?
Here is the code of my function module , i know it's not a standard one because i'm not using cursor but i got everything i need. The delta mode must be on creattion time of record in mkpf .
FUNCTION z_bw_extract_mvt_sortant.
""Interface locale :
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
*"     VALUE(I_ISOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*"     VALUE(I_DSOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG OPTIONAL
*" TABLES
*"      E_T_DATA STRUCTURE ZBW_MVTSORTANT OPTIONAL
*"      I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*récupération des données.
CASE i_initflag.
    WHEN space.
      transfert_record it_mvtsor e_t_data i_maxsize.
     DESCRIBE TABLE it_mvtsor LINES sy-tfill.
     IF sy-tfill GT i_maxsize.
       APPEND LINES OF it_mvtsor FROM 1 TO i_maxsize TO e_t_data.
       DELETE it_mvtsor FROM 1 TO i_maxsize.
     ELSEIF sy-tfill GT 0.
       APPEND LINES OF it_mvtsor FROM 1 TO sy-tfill TO e_t_data.
       FREE it_mvtsor.
     ELSE.
       RAISE no_more_data.
     ENDIF.
    WHEN OTHERS.
raffraichissement des variables de travails.
      FREE : r_werks , r_bwart , it_mkpf , it_mseg , it_mvtsor .
      CLEAR : r_werks , r_bwart , it_mkpf , it_mseg , it_mvtsor .
récupération des paramètres.
      PERFORM set_selection_criteria TABLES i_t_select.
      PERFORM init_code_mouvement.
      SELECT * FROM mkpf
      APPENDING CORRESPONDING FIELDS OF TABLE it_mkpf.
WHERE cpudt = sy-datum.
      CHECK NOT it_mkpf IS INITIAL.
      SELECT * FROM mseg
        APPENDING CORRESPONDING FIELDS OF TABLE it_mseg
        FOR ALL ENTRIES IN it_mkpf
        WHERE mblnr = it_mkpf-mblnr
          AND mjahr = it_mkpf-mjahr
          AND werks IN r_werks
          AND bwart IN r_bwart.
      LOOP AT it_mkpf ASSIGNING .
        ENDLOOP.
      ENDLOOP.
ENDCASE.
ENDFUNCTION.
Thanks in advance.

Hi,
first of all: The use of delta in a generic Datasource by FM is not supported by SAP standard. You need to change the extraction method in table ROOSOURCE from F2 to F1. There is no standard transaction to do this, you have to do a hard table update. Be careful not to change any standard datasource by error, otherwise you can get serious problems.
The interface for the FM will change with the new extraction method. You will need a new parameter I_UPDMODE of type SBIWA_S_INTERFACE-UPDMODE to distinguish between Init, Delta and Full Load.
For an example coding please refer to FM RSVD_BW_GET_DELTA_DATA.
Hope that helps
Stephan
Message was edited by: Stephan Müller

Can you force a Oracle Update Statement to use a specific database thread?

We are attempting to write a Oracle Update Statement to update a value on all records in a single column. We are updating a column with a value found in a history table. Simple enough. We do it all the time. It works but we are having contention issue with users on the system using the main database threads and updating the same table at the same time. So what is happening is the update uses up all the available database threads and then the users just get timeouts and can't update. What we are trying to determine is can I write it to force the update statement to use a specific thread on the database when it is running?
Here is the current update statement
UPDATE
TASK_DATA TSK
SET
dttSTATUS_WORK_IN_PROGRESS_TIM =
SELECT
HIS.T5
FROM
H2839 HIS
WHERE
TSK.REQUEST_ID = HIS.ENTRYID
AND
HIS.T5 IS NOT NULL
AND
TSK.dttSTATUS_WORK_IN_PROGRESS_TIM IS NULL
Edited by: user11307503 on Oct 21, 2009 3:47 PM

the update uses up all the available database threads and then the users just get timeouts and can't updateI'm not convinced that you're got a clear picture of how Oracle works and what is going on here.
You're updating TASK_DATA, the whole table.
Writers don't block readers - that's a key principle of Oracle.
But if all the other users are trying to update a row or rows in TASK_DATA at the same time as your other process is updating all rows in the table, then there's going to be contention.
This is not about "using up all available database threads" - that's nonsense.
This is (probably) about sessions trying to update rows that your other process has locked.
1. Get a clear picture of what the sessions are waiting on - it's probably TX locks.
2. How many rows are you updating with this update on TASK_DATA?
3. How long does it take? How often do you do it? Is there no quieter time when you can do it?

Hello. I've Apple TV 3rd gen and MacBook Pro 2013 all with latest updates. AirPlay works fine till I don't start streaming videos from YouTube. After that AirPlay icon from MacBook menu bar simply disappears. Could some help. I'm using 2 Mbps Internet

Hello. I've Apple TV 3rd gen and MacBook Pro 2013 all with latest updates. AirPlay works fine till I don't start streaming videos from YouTube. After that AirPlay icon from MacBook menu bar simply disappears. Could some help. I'm using 2 Mbps internet connection.

Same issue here- I can airplay my amazon prime library just fine from my iphone 5 but on my macbook- (mavericks, 15 inch 2013 retina with quad core i7, nvidia 650 M and SSD) it just sputters and lags.
I have noticed web video is considerably worse than local content, giving me pauses of up to 2 or 3 seconds in which video stops but audio continues in the amazon player. Youku video, however, seems relatively stable. Our subscription speed is 25 mbps, so that should be plenty to stream SD video from Amazon and doesn't account for why it would be nice and stable from the iphone, but not the mbp.
Playing light, locally hosted steam sidescrollers like Limbo is better but gives periodic drops in framerate on the Tv. when mirroring the framerate remains steady on the MBP screen.
Games airplayed from my iphone seem relatively stable, though with a noticably lower framerate on the TV than on the phone.
It seems these issues have abated considerably since yesterday's Apple TV update, but are still curious nonetheless and I'm not sure that the update yesterday was specifically meant to address those issues or if I'm just getting a time with less network interference now.
Comcast recently installed a new router/modem/phone combo, replacing our old separate modem and router setup. I'm going to test if putting the network on a different channel helps.

After ios 8 update I can no longer play music through my car. I have a 2012 Nissan Rogue - whihc has its own cable made to use with iPhone 4 - I use a apple adapter to converst to use with 5.

After ios 8 update I can no longer play music through my car. I have a 2012 Nissan Rogue - which has its own cable made to use with iPhone 4 - I use a apple adapter to converst to use with 5. Has been working fine up until update. Is there a fix for this? The car does not have usb

Here I come to save the daaaaaaaaaay!!!
Had the same issue with my Nissan Rogue 2011.
This listed below will fix it...
Go to General > Restrictions > CarPlay -- Make sure Carplay is DISABLED. (The new IOS 8 enables this on default)
Go to General > Reset > Reset Network Settings
The Nissan Rogue radio system was never designed to work with CarPlay. By default, CarPlay feature comes enabled when you install IOS 8. Suckz, right?
You're very welcome! Have a great day!
Sincerely,
The Superhero

Windows Update Client failed to detect with error 0xc8000247 after using Lenovo System Update 5

My Windows 7, SP1 was running fine, until I installed few updates on 10/15 using Lenovo System Update 5 then Windows Update stopped working, shows as RED:
{CE3119AD-35EF-41CF-9C21-C7698FEB8393}   2013-10-14 21:53:00:256-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Software Synchronization   Windows Update Client successfully detected 4 updates.
{EB17A01A-EB6E-49FF-9EA2-AA0DD063B4B1}   2013-10-15 04:15:54:069-0700   1   162   101   {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}   201   0   AutomaticUpdates   Success   Content Download   Download succeeded.
{77DAE88F-2795-4258-8BBF-8D27E53662CF}   2013-10-15 12:10:38:196-0700   1   193   102   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Content Install   Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems (KB2862330)
{1398F777-3AEF-4D1D-BE4C-407EC4AEAD4C}   2013-10-15 12:15:25:676-0700   1   183   101   {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}   201   0   AutomaticUpdates   Success   Content Install   Installation Successful: Windows successfully installed the following update: Security Update for Windows 7 for x64-based Systems (KB2862330)
{A220898A-E5FE-4FE7-8413-2B0C7B4013D0}   2013-10-15 12:15:25:766-0700   1   202   102   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Content Install   Reboot completed.
{A5400FF2-33ED-4A47-8409-13E5DFE16A6D}   2013-10-15 19:29:31:486-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{43C533EE-775D-445E-A652-06648B72DE65}   2013-10-15 19:29:49:702-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{D6AAAFFB-7F18-4A7E-B39D-1BA09CDC5E6D}   2013-10-15 19:30:05:744-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Software Synchronization   Windows Update Client successfully detected 3 updates.
{4E73B1C1-5BA2-415D-AB34-92F7AB3DB418}   2013-10-15 19:30:08:753-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{51248882-41AC-4E59-B813-87AD326310AD}   2013-10-15 20:00:05:044-0700   1   183   101   {DBD3B4E9-0357-47DA-8317-D0CF2163BFE6}   501   0   wusa   Success   Content Install   Installation Successful: Windows successfully installed the following update: Hotfix for Windows (KB2661796)
{FB2B8E5E-442C-4E76-B23D-6A41B4324C9D}   2013-10-16 00:11:39:832-0700   1   148   101   {00000000-0000-0000-0000-000000000000}   0   c8000247   AutomaticUpdates   Failure   Software Synchronization   Windows Update Client failed to detect with error 0xc8000247.
Lenovo Thinkpad W500, Intel (R), Windows 7, SP1, latest updates as of Oct 15
(1) Checked Setting, set to automatic update whenever, even changed to never update, rebooted the OS and changed back to automatic update and rebooted the OS.
(2) Stopped Windows Update Services, renamed SoftwareDistribution folder and started the window update services and rebooted.
(3) Ran MS FIXIT
(4) Ran System File checker Scan (sfc /scannow)
(5) Ran CHKDSK /F
(6) Installed "Intel Rapid Storage Technology" drivers from Lenovo site
(7) Ran Update for Windows 7 for x64-based Systems (KB971033)
None of the above possible recommended solutions were able to fix the issue yet and now I am getting a message your Window is Not Genuine!
Any help or guidance is appreciated.
Solved!
Go to Solution.

The Lenovo System Update installed the "Intel Matrix Storage Manager driver 8.9.2.1002" right before the Windows Upgrade got broken. So in the Device Manager under IDE ATA/ATAPI Controllers, I choose Intel ICH9M-E/M SATA AHCI Controller, on the Driver Tab, I choose the option "Roll Back Driver" and after rolling back the driver and restarting the OS, now Windows Update is working like a Champ!
The End!

HT4623 Please help! i have just update my iphone 4s with 7.4 update and my phone is now asking for a password which i dont have. I have tried my keypad lock i used before the update and also my itunes password and neither work, how do i rectify this ??

Please help! i have just update my iphone 4s with 7.4 update and my phone is now asking for a password which i dont have. I have tried my keypad lock i used before the update and also my itunes password and neither work, how do i rectify this ???

Did you buy this iPhone new from an authorized seller?

I need to update my phone, but my computer broke, and do not have a new one. I have an Itunes account, can I use someone else computer to go through with the update? Is there a chance of loosing all my data, ie: music/photos?

I need to update my phone, but my computer broke, and do not have a new one. can I use someone else computer to go through with the update if i log on with my itunes account or Is there a chance of loosing all my data, ie: music/photos? And if all else fails can i go to the apple store and have them update my phone?

Update to what? The 3G you want to update? You have ios3 or 4 on that 3G?
Go to a friend, authorize that pc.
Read this : http://support.apple.com/kb/ht1848
and this : http://support.apple.com/kb/ht2519
Make a backup of your stuff (from the phone. apps/photos/music/blabla). Update your phone. The phone will restore the backup automatically.

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps

How can i use Itunes to update more than one IPad with more than one owner

How can i use Itunes to update more than one IPad with more than one owner? I own an IPad and my wife owns an IPad. I want to use my system to update both IPads. We have different Apple Accounts and different applications. Is this possible?

Of course, that is too easy. I am such a bonehead.

My question is in regard to pc to mac migration. How do I migrate information from my pc with specific user account to an existing user account on my mac? I do not want to use multiple mac user accounts.

My question is in regard to pc to mac migration. How do I migrate information from my pc with specific user account to an existing user account on my mac? I do not want to use multiple mac user accounts.

https://discussions.apple.com/message/16371308#16371308

My old appleID use email with domain already deactivate. So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

My old email that using register for apple ID cannot access/check any mail because that domain already deactivate.
So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

Hi ccharat,
Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Delete Account, then tap Delete to confirm.
Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
I hope this helps,
-Joe

ISync use with specific update conduits

Similar Messages

Maybe you are looking for