ISync v3.0.2 released as part of Mac OS X 10.5.3 Update
In the *Mac OS X 10.5.3* Update released today, iSync has been updated from v3.0 (568.0) to v3.0.2 (574.0).
No support for any new devices has been added. It's now 7 months since Apple last added any new devices to iSync.
There are no obvious changes in iSync 3.0.2 and nothing mentioned in the Mac OS X 10.5.3 release notes.
If anyone notices anything new, improved or updated, please post here...
The crashes you're experiencing could be caused by any number of different things, but one thing to check is whether you are using a Proxy server to connect to the internet. (Check in System Preferences -> Network -> Advanced). Some companies and many universities and libraries use proxy servers (automatic proxy.pac files) to let you access premium content from off-site. The OS 10.5.3 combo update seems to have introduced a compatibility bug that leads to crashes with proxy servers.
From your description, I can't tell whether this is what you're experiencing, but it may be related. So if you are using a proxy server, turn it off in System Preferences and try without.
If this indeed turns out to be the problem and you need to use a proxy server for work/research, then you should try Firefox (new version: Firefox 3 was just released last week) instead of Safari, and install one of the proxy extensions (e.g. FoxyProxy or SwitchProxy). Firefox handles proxies inside the browser (as opposed to the system-wide level, which is what Safari is doing). That allows you to switch your proxy server on and off. I've been using it with my proxy server and it's very stable. With FoxyProxy, you can even define site-specific browser behavior.
Similar Messages
-
Apple has released iSync 2.2 as part of the Mac OS X 10.4.6 Update package, and it has serious ramifications for current or first-time users of iSync. READ this information below before you perform the installation. This information is extracted from Technical Information Library article 303419, found here:
http://docs.info.apple.com/article.html?artnum=303419
iSync 2.2: Read before updating to Mac OS X 10.4.6 or later, or before first sync
iSync 2.2, included with the Mac OS X 10.4.6 Update, works with many phones. However, if you have an existing phone that you sync with iSync in Mac OS X 10.4 through 10.4.5, there are some important steps you should follow before you update to Mac OS X 10.4.6 or later, as well as after you update.
Before you update to Mac OS X 10.4.6 or later
1. Make sure that all of the contact and calendar data that you want to sync is on your computer.
2. Perform a sync with your devices before upgrading to Mac OS X 10.4.6 to make sure the information on your computer is up to date, and to resolve any conflicts between your devices and computer.
3. If you have modified iSync or installed third-party software to support your specific model of phone, or if if iSync 2.2 specifically adds support for your specific model of phone, you should consider removing your phone from iSync, undoing these changes and uninstalling that software before upgrading. Your phone will not work with iSync after applying the Mac OS X 10.4.6 Software Update and your third party software will need to be updated.
Note: Reudo's Sync for Mac is not affected and does not need to be uninstalled prior to updating.
If you skip these steps, you will see this message after upgrading: "Plug-in for this phone model is missing. Install that phone's plug-in if you want iSync to support it."
4. Make sure that your phone is configured to use its memory to store contacts instead of a SIM card. The steps on how to do this vary from phone to phone—consult your device's documentation for how to check its configuration, and if necessary how to change your phone to store contacts in its memory.
5. Make sure your phone has the correct date and time set.
6. Make sure that you have a current backup of your Address Book and iCal data.
Refer to the article for additional instructions and an illustrated example of the steps to perform before installing the update.as the jump to intel progresses, so too will incompatibilities between PPC and intel mac. this will force us all to buy more apple.
G4 450DP Mac OS X (10.4.4) digidesign, motu, apogee -
WM-PP interface, Release order Parts
I have some components maintained with a control cycle staging indicator "3" i.e release order parts.
I have tried two different ways of staging these components from warehouse and into the Production supply area. Option 1 is using MF60 (pull list) and Option 2 is using LP12.
My question is
1. What is the difference b/w MF60 and LP12? If they are the same, which one is easier to use for a shop-floor supervisor?
2. Under MF60, i am able to flag an "Immediate TO creation"? Can this be configured to print out a TO immediately on saving the transaction?
3. Can an immediate TO creation be activated for LP12?
Thank youHi,
MF60 is used to create TO for material transfer between Storage locations.
LP12 is used for storage locations which are activated for Warehouse Management activate wherein Transfer Requiremrnt thereby Transfer Order for WMgt is created.
In MF60, Stock Transfer Order Document is created whereas in WMgt, Transfer order is created for materials to be put in Storage Locations and not for interstorage location transfer.
reward points if useful. -
Automate WM material staging for release order parts.
Hi all,
We use LP12 for monitoring WM Material Staging of Release Order parts.Is there a way to automate the process of WM Material Staging for Release Order parts?
Is there is any Standard SAP Program which can be run in the background or user exit to achieve this?
Pl suggest
Regards
SBHi Arunachalam,
You can configure WM staging settings in Production Scheduling Profile (OPKP)
You need to update WM Request field and the available options are:
No creation of transfer requirements on order release
X Only creation of transfer requirements on release
1 Transfer requirement and transfer order on release
Hope this will solve your problem.
Please check and Revert.
Regards
Suri -
No updates to iSync in Mac OS X 10.4.10 update
Apple today released the Mac OS X 10.4.10 update:
Mac OS X 10.4.10 Update (PPC) - 25MB
Mac OS X 10.4.10 Combo Update (PPC) - 165MB
Mac OS X 10.4.10 Update (Intel) - 72MB
Mac OS X 10.4.10 Combo Update (Intel) - 293MB
To answer the inevitable question, there are no updates to iSync in this release. iSync remains at v2.4 and no support for any new phones has been added.Apple today released the Mac OS X 10.4.10 update:
To answer the inevitable question, there are no
updates to iSync in this release. iSync remains at
v2.4 and no support for any new phones has been added.
Ok, fair enough.
However, I was looking in vain for an email address to contact Apple directly for a request to cover the phone I have. No matter where I looked, I kept being offered the discussion groups or a way to start a repair.
G4 500 MHz (work) & iMac 24" (home) -
As the title has stated, I have a problem with downloading Indesign CS 6 part 1(Mac) , it always stop downloading at 6.8MB (out of 1.2GB). I tried restarting my mac, using different browser but it is always the same result... Any help???
Try it from this site
Download Adobe CS6 Trials: Direct Links (no Assistant or Manager) | ProDesignTools -
How to get parts for Mac?
Hi,
Anyone knows how to obtain spare parts for Mac book?Hi Tom,
Here is a list of some parts and repair sites:
powerbookmedic.com
ifixit.com
pbparts.com
dttservice.com
powerbooktech.com
powerbookresq.com
keanesf (used to be powerbookguy.com)
macrecycling.com/
Googling will turn up more. Ebay and Craigslist usually have some postings. -
New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?
I tested this:
Reinstalled Aperture 3.1 from the Trial Installer.
In some way it seems to be working. But the whole thing is a scary Chimera.
It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
But the Media Browser does not show the aperture Library that I created.
The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder. Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
When opening the chimera Aperture, I see plenty of warnings in the Console window:
An Aperture "Hang" report
xpcproxy assertion failed
com.apple.IconServiceAgent: main failed to composite image
quicklookd: Warning
and more ... the hang was critical. I had to force quit Aperture more than once.
So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your precious photos. -
Chaque fois que j'essaie de mettre à jour certaines de mes applications j'ai ce message : Impossible d’ouvrir « x »,(dans le cas présent x=VueScan) car cette application n’a pas été téléchargée à partir du Mac App Store.
Que dois-je faire ?
Quelle procédure employée pour mettre à jour certain logiciels ?
Comment respecter au mieux la sécurité ?
Merci, je suis un vieux béotien cacochyme qui ne cherche qu'a comprendre.
jean duvalLe Mac App Store ne mettra à jour les applications qui ont été achetés sur le Mac App Store (MAS). Certaines applications ont une fonction de mise à jour Vérifier dans le menu nom de l'application, VueScan n'est pas une de ces applications. Vous pouvez également obtenir une application 3ème partie qui va scanner votre Mac, créer une liste des applications installées et vous alerter quand une mise à jour est disponible pour une application.
Une application telle est Bodega;
Votre magasin du coin pour les applications Mac
Vous pouvez également trouver des mises à jour pour les applications Mac à Macupdate.com -
Can I use iSync between Address B and my mobile without .Mac?
Can I use iSync between Address B and my mobile without .Mac?
Yes, if you have an iSync supported phone.
For 10.4+ see here:
http://www.apple.com/macosx/features/isync/devices.html
plus all the models supported by Phone Plugins from here and here.
However, for your 10.3.9 Mac, your choices are severely limited:
http://docs.info.apple.com/article.html?artnum=301039 -
When is going to be released office 2013 for mac?
When is going to be released office 2013 for mac?
ginus wrote:
When is going to be released office 2013 for mac?
Why do you think anyone here would know? -
Can I use iSync for more than one user on my .mac family account?
I just got a new MacBook Pro 17" to replace my Pro 15", which I want to give to my hubby who's using an old MacBook. I have successfully synched my old Pro to the cloud and my new Pro, thereby rolling over all my settings, widgets, address book, etc. But now I want to roll-over my husband's settings from the MacBook to the old 15" Pro. I'm afraid if I just perform a sync, MY settings out there in the cloud will overwrite his. What's the proper procedure to follow here? He's got a lot of passwords and really wants his bookmarks saved to the 15" MacBook Pro-- that's the most important info he wants to maintain. Recommendations?
iSync is for syncing mobile phones and PDAs - it has nothing to do with syncing between Macs.
You post your question in one of the more relevant MobileMe forums. -
Zip bomb - Is this file part of Mac OS X installation? - bootroot.loader
(Please excuse my bad writing - my English isn't that good.)
Sophos AntiVirus (most recent version) warns me:
File Not Scanned (appears to be a 'zip bomb'):
Macintosh HD:System:Library:PrivateFrameworks:MediaKit.framework:Versions:A:Resources:MKD rivers.bundle:Contents:Resources:bootroot.loader
AppleCare says on a PowerPC Mac OS X there is no file like this by default - could only be a virus or could have been added by another (third-party) application.
I found a post on http://www.daniweb.com/techtalkforums/thread59657.html via Google. Someone seems to have the same problem - with a PowerPC Mac OS (Mac mini)!
I use an Intel Mac (MacBook). AppleCare was not able to tell me whether this file is part of the standard installation of an Intel Mac OS - are you?
Could you tell me if this file exists on your (Intel) Mac?
Can you tell me: Is this a zip-bomb - or not?
Thanks for help.
By the way: Sophos has never heard of this file.
Intel MacBook 1st generation Mac OS X (10.4.8)Well, you could submit it to the virustotal.com site,
where
it can be scanned (for free) by all of the various
virus
scanners, and you could compare the results.
Great URL, thanks Russ! Hadn't known it, yet...
These are the results:
Complete scanning result of "bootroot.loader", received in VirusTotal at 12.16.2006, 07:49:16 (CET).
Antivirus Version Update Result
AntiVir 7.3.0.19 12.15.2006 no virus found
Authentium 4.93.8 12.15.2006 could be an archive bomb
Avast 4.7.892.0 12.15.2006 no virus found
AVG 386 12.15.2006 no virus found
BitDefender 7.2 12.16.2006 no virus found
CAT-QuickHeal 8.00 12.15.2006 no virus found
ClamAV devel-20060426 12.15.2006 no virus found
DrWeb 4.33 12.15.2006 no virus found
eSafe 7.0.14.0 12.14.2006 no virus found
eTrust-InoculateIT 23.73.87 12.16.2006 no virus found
eTrust-Vet 30.3.3254 12.15.2006 no virus found
Ewido 4.0 12.15.2006 no virus found
Fortinet 2.82.0.0 12.16.2006 no virus found
F-Prot 3.16f 12.15.2006 could be an archive bomb
F-Prot4 4.2.1.29 12.15.2006 no virus found
Ikarus T3.1.0.26 12.16.2006 no virus found
Kaspersky 4.0.2.24 12.16.2006 no virus found
McAfee 4920 12.15.2006 no virus found
Microsoft 1.1804 12.15.2006 no virus found
NOD32v2 1924 12.15.2006 no virus found
Norman 5.80.02 12.15.2006 no virus found
Panda 9.0.0.4 12.16.2006 no virus found
Prevx1 V2 12.16.2006 no virus found
Sophos 4.12.0 12.14.2006 no virus found
Sunbelt 2.2.907.0 11.30.2006 no virus found
TheHacker 6.0.3.132 12.14.2006 no virus found
UNA 1.83 12.15.2006 no virus found
VBA32 3.11.1 12.15.2006 no virus found
VirusBuster 4.3.19:9 12.15.2006 no virus found
Thanks a lot, folks! Problem solved: no virus, no zip-bomb.
MacBook 1st generation; PowerBook G4 12" Mac OS X (10.4.8) -
64 Bit not releasing memory in Develop (Mac) ?
All,
Would someone run a quick test please 64 bit vs. 32 bit in Develop mode? In 32 bit while in develop, once I stop working on the image, the memory is released back to the system (using Activitiy monitor), in 64 bit, the memory is about half a GB higher to begin with, and just stays no matter what.. even is LR is completely idle. Macbook Pro, 10.6.3, 4GB .. Thanks,
Jay S.I've noticed that behavior on my system as well. I can say that i notice an immediate drop in 32 bit mode but it definitely releases it. 64 bit holds the memory until the app quits.
-
Firefox latest release sucks CPU on mac
your latest release SUCKS CPU so much it is MELTING my mac...just fyi. discontinuing use of firefox after 2.5 years.
Before you leave the computer for a time, try this;
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Then let it go for a while. After restart.
Maybe you are looking for
-
Two sided printing with wordperfect HP Photosmart 6515
Any ideas how to set up two sided printing with wordperfect documents using HP Photosmart 6515
-
Can you transport files from Final Cut Express HD to Final Cut Pro HD?
I have a problem. While working with Final Cut Express HD my clips were erased leaving me with blank spaces in my sequence. I can't seem to figure out how I can save my movie. I have reloaded the files into Express and even Took everything(file & seq
-
How to add a new payment plan type
I want to define a crm sales order. In customizing process, I want to add the new item in payment plan type field, but I don't find the customizing route . Where is it to find ? Thanks.
-
IPhone - Drill down and down and down...
Using the SimpleDrillDown & TableView examples... To continue drilling down (3rd level; maybe also 4th/5th, ending in a textView), are subsequent levels down just the first detail view simply looped & reconfigured with fresh data from an additional a
-
10.1.3.3 OAF messageChoice LOV or Picklist Filtering
I have a LOV or a Picklist filled with 10 items in a messageChoice item. I want to remove a certain number of choices from the messageChoice (I know what choices I want to have removed/filtered) based on a certain getAttribute from a row, or based on