ISync won't start up through .mac
I have decided to finally use my .mac account and want to sync everything together.
I click into system prefs and choose .mac. When I next click on the sync button it goes grey and nothing happens.
If I view the iSync emblem in the top screen toolbar it tells me that 'syncing disabled'
I have tried to follow the Apple tutorials to sync but I can't get the first part to work . The 'Advanced' option also doesn't do anything when clicked in the .mac prefs.
Any ideas would be appreciated
Thanks
Can you boot from the installer disc#1 and see if you can run "repair disk"
from Disk Utility in the menu beneath Installer? Or can't you boot from the
installer disc...?
Sounds like the hard drive or some other controller device may be mal-
functioning but it may not be all that bad. The issue is an odd one and
worse-case there may be a hardware cause for this; if the hard disk
drive has gone bad or is unreadable by the computer and not seen by
the installer's Disk Utility, when booted from it. You may be able to
use disk tool options from that disc to zero the hard drive and reformat
to see if you can make it work. The directory may be bad on the HDD;
and you may need a different hard disk drive, or a third party disk utility.
PS: Was the Firmware Update performed on that machine while
it was running in OS 9.1 prior to attempting to run/install any OSX
system or boot discs in it? You don't specify if that was done first.
Similar Messages
-
I'm reposting the question below in this forum in hopes of getting a solution. In the Tiger: Installation & Setup forum I got one reply (from user Niel) who suggested that I:
"Create a new Finder window and click on the item in the sidebar with the house icon; from here, open the folders Library, Preferences, and then ByHost. In the ByHost folder, locate the item that has a name starting with com.apple.syncservices and move it to the desktop."
Unfortunately, there's no com.apple.syncservices file in the ByHost folder, nor is there anything similar. And a Spotlight search turned up nothing as well.
Any suggestions would br greatly appreciated--thanks in advance for your help.
I tried .Mac for the free trial period, found it not useful for me, and let the trial period expire. In the interim, I turned off syncing in iSync's preferences, so .Mac would not constantly sync in the background. I also in the interim upgraded to 10.4.6, which upgraded iSync to 2.2.
All this was in my everyday user profile, which does not have admin privileges.
Now my iSync won't start properly. The program hangs and I have to do a "force quit". If I right-click on the icon in the dock and select "Sync Devices", I get a dialog box that says that synchronization is not turned on, and I need to turn it on in iSync preferences. But, because the iSync program isn't starting up properly, "Preferences" is not an option in the iSync menus. So I can't turn on the synchronization.
That's the definition of a "Catch-22"!
Here's what I've done so far to address the problem:
--Tried iSync under another profile with admin rights. It works properly, which tells me that the problem is limited to this user profile.
--Tried giving admin rights to the user profile. No improvement.
--Used Spotlight to delete all iSync items including the program, reinstalled iSync 2.1 from my original OS X DVD using Pacifist, and reapplied the 10.4.6 Combo Updater to update iSync to 2.2. iSync works in the alternate profile, but not the everyday user profile.
--Tried using iSync 2.1 without upgrading to 2.2--it worked fine in the alternate profile but not the user profile.
Any ideas? Is there any way to use a Terminal line command to reset the iSync preferences in the user profile? I'm at a loss as to how to proceed.
Mac Mini Mac OS X (10.4.6)An Apple tech called me last night to try to rectify my problem. After a further hour of trying various things, my problem is still unresolved.
What I think I need is for someone conversant in Terminal commands to give me the specific command for turning on synchronization in the iSync preferences. Here (I think) is the general syntax for such a command:
defaults write {name of .plist file} {key} {-class} {value}
For instance, to use Terminal to put a Quit item in the Finder's File menu, you would enter:
defaults write com.apple.Finder QuitMenuItem -bool Yes
Although I'm very happy with Apple's proactive customer service, I'd like to get this fixed. Thanks in advance for any help that's offered. -
IBook won't start up in Mac OS X
Hi,
I have an iBook G3 with operation system OS 10.3.9 that I've been used for years. Recently, it just won’t start up in Mac OS X, the computer stops at the screen with a gray apple and a spinning gear. The last thing I remember doing is looking for physical address (Ethernet HW address) of the computer and didn’t change any setting. I don’t recall updating any program the last time I used it.
The computer passed all testes with “Apple Hardware Test” come with the computer.
I’ve tried everything that I can perform mentioned in "http://docs.info.apple.com/article.html?artnum=106464". I once had the computer start up in safe mode to remove all login items as the document said and then I can never get into safe mode at all. I can now still boot into single-user mode but nothing worked.
I have two partitions (A&B), partition A has operation system installed. I used “TechTool Deluxe 3.0.2” to repair the disks, and partition B passed all testes and A sometimes passed all and sometimes failed on ‘Linear Read/Write, Random Read/Write, Read/Write Buffer’.
I can’t repair the volumes (both A & B) with disk utility using OS 10.3 install CD nor can I Archive and Install OS 10.3 on partition A, they both show the same error “could not unmount disk (-10000)”. I tried to erase partition B and it still showed “could not unmount disk”.
If possible I would like to save some files in partition A and I don’t care B at all. However, if necessary erase entitle disk and reinstall could be an option, though I don’t think that would work at current stage.
Any idea? Thank you in advance.
iBook G3 Mac OS X (10.3.9)Are you booting from the OS X Installer CD? You cannot repair a startup volume. If DU cannot unmount the volume it's because the volume is in use which suggests you did not boot from the OS X Installer Disc. I suggest you do that. After the installer loads select your language and click on Continue button. When the menu bar appears select Disk Utility from the Installer menu. You can repair both volumes this way.
The problem you describe at startup suggests that there are missing or corrupted essential system files. The only fix is to reinstall OS X. You can do an Archive and Install only if the hard drive is OK so repairing it is essential if you want to do an Archive and Install.
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
Your Mac won't start up in Mac OS X (Mac OS X 10.3.9 or earlier)
I just got off the phone with an AppleCare agent. My iBook OS 10.4 wouldn't start - it just went to a blue screen. I'm happy to say that the agent got everthing working again and said that she would email me an article that would help if it ever happens again. She emailed me "Your Mac won't start up in Mac OS X (Mac OS X 10.3.9 or earlier)" I have 10.4, is this article any use for me or was I emailed the wrong articel. Is there an article "Your Mac won't start up in Mac OS X (Mac OS X 10.4 or later)"????
Thank you for yoiur response. I'll click on that link and add my input..
Don't be put off by the title. The document's just as
valid for Tiger, especially if those are the same
steps that fixed your problem. The article was
revised Feb 2006 and someone forgot to update it to
mention Tiger. Go to
<http://docs.info.apple.com/article.html?artnum=106464
, click on the It's good, but... link and
tell them it should be updated to include a reference
to Tiger. -
ISync won't start after creating sync conduits with iTunes
Hey folks!
After establishing a link between my iPhone and iCal and the adressbook
using iTunes iSync refuses to start. It pops up for a split second in
the dock and then vanishes again. I gave it a try from a different
account on the same computer and everything works perfectly. What is
going wrong there? Are the conduits between iCal, the adressbook and
iTune and iSync exclusive connections?
Greetings,
Torsten from Stuttgart.Problem was solved after next version of iTunes.
-
IWork '08 applications won't start on my Mac Pro, 10.5.1
I installed iWork '08 (5-person family license); install seemed to go well. None of the three iWork '08 applications opens. I don't even get to the "please enter your license number" screen: a few bounces and then immediate premature termination. None of my other applications appears to be affected. I'm quite confident my disk drive directory is uncorrupted.
I tried all of the following without benefit:
1. Restarting computer
2. Restarting in Safe mode
3. Reinstalling iWork '08
4. Updating through Software Update
Curiously, I also have a demo copy of iWork '06. Keynote shows the same immediate termination behavior, but Pages opens normally and shows me the appropriate "do you want to use this in demo mode" startup screen.
I installed iWork '08 and ran it successfully on my wife's Power PC (dual 2 GHz) running 10.4.11, using the same source disk. It also works without a hitch on my 24" white Intel iMac running 10.5.1.
Here's a dump from system.log on the Mac Pro:
Dec 25 16:01:14 Macintosh Keynote754: * Assertion failure in -NSMenu itemAtIndex:, /SourceCache/AppKit/AppKit-949/Menus.subproj/NSMenu.m:819
Dec 25 16:01:14 Macintosh Keynote754: An uncaught exception was raised
Dec 25 16:01:15 Macintosh Keynote754: Exception caught by top level: NSInternalInconsistencyException : Invalid parameter not satisfying: (index >= 0) && (index < (_itemArray ? CFArrayGetCount((CFArrayRef)_itemArray) : 0))
Dec 25 16:01:15 Macintosh Keynote754: * Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Invalid parameter not satisfying: (index >= 0) && (index < (_itemArray ? CFArrayGetCount((CFArrayRef)_itemArray) : 0))'
Dec 25 16:01:15 Macintosh Keynote754: Stack: (\n 2463965803,\n 2522640539,\n 2463965259,\n 2467922148,\n 2496296467,\n 2499741030,\n 2501968700,\n 16995,\n 2464025205,\n 2496161134,\n 2496120732,\n 2496119037,\n 2496118080,\n 2496117886,\n 15599,\n 15493,\n 315990,\n 315773\n)Additional debugging information: creating a dummy new account on the Mac Pro allows me to use iWork. So there's something specific to my main user account -- that DOESN'T turn off in Safe mode -- that's interfering with starting iWork but doesn't mess up other programs. Man, I REALLY don't want to have to dump my main user Library and put it back piece by piece until I find the offending code. Any suggestions?
-
My 5.7.1 won't start om my mac
Tryed to update my lightroom 5,7 on my mac to 5,7,1 but now it won't start
Hi Arne,
Do you get any error message while launching Lightroom?
Which version of Mac OS are you using?
Thank you for posting on Adobe Forums. -
IMessage won't start conversation from Mac
Hey everyone,
Iv'e been looking for a solution online for this problem iv'e been having, but i couldn't find answers anywhere.
The problem is that for some reason, i can't start a conversation from my mac when trying to send new messages. when i send those messages from my iphone it works, and then i can continue the conversation from my mac.
also, iv'e noticed that it takes a lot of time for messages to "sync" itself with my conversations that i started on my iphone. is there any way to "refresh" imessage (like on mail for example...)???
i verified that my accounts on both devices are the same, that i have the same settings, but still, nothing works.
anyone is having the same problems?? anyone has a solution...?
Thanks,
Tal.Hi,
So, in Messages main window you have New Message at the top left.
You are entering your Contacts Name in the "To" field or using the Blue + icon > Contacts and selecting the contact.
The name is turning Blue ?
The Text entry field at the bottom also reads iMessage ?
If the name is not Blue then carefully click the downward arrow head at the end of the name.
Select the active iMessage option (highlighted with blue Speech bubble)
Does the name go Blue now ?
I tried testing with my iMessage Account logged out and the setting in the General Section set to Allow IMs and iMessages to "Wake" the app but this did not start the iMessage account when iMessaging from the iPhone
It was only a one off test with the app open but the account logged out which seemed closest to what you describe.
9:26 PM Thursday; February 14, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Re: iMac G4 won't start up in Mac OS X and black screen
I am having same problem. Sometine the iMac stay on all day; somestimes it freezes up and I get the message in 4 languages to power down; other times it startup after numerous trys. I think it is due to kernal panic but do not know how to fix it. I ran TechTool Deluxe that came with Protection Plan and all items passed. Exasperated.
The multi-language screen and prompt to restart are indications of a Kernel Panic
situation and that may be due to poor or bad RAM (failing chips can be replaced)
or due to some other hardware cause; or sometimes software conflicts cause it.
• Resolving Kernel Panics:
http://www.thexlab.com/faqs/kernelpanics.html
• Technical Note TN2063: Understanding and Debugging Kernel Panics
http://developer.apple.com/library/mac/#technotes/tn2002/tn2063.html
If you have the original software packet as shipped with the computer, it has
an Apple Hardware Test on disc media specific to that computer model. It
can be used as a boot volume, and set to repeat over a duration of time to
check and test some aspects of the machine's hardware status.
Between RAM chip issues, failing hard disk drive, software conflicts and
maybe problems in the logic board, some of these can cause the main
issue as suspected in a multiple-language restart panic screen.
You may also be able to carefully reset the Power Management Unit
to get the computer to recognize some aspects of hardware, maybe
to have it attempt to start correctly; unless there is some other failure.
• Resetting the iMac (Flat Panel G4) Power Management Unit (PMU)
http://support.apple.com/kb/HT1712?viewlocale=en_US
I see there are other posts in this Discussions area where black screen
and topics which may be similar to yours, are posted. Have you seen
if they cover workable means of checking out your issue?
Good luck & happy computing! -
I restarted my Mac this morning - when it restarted Firefox did an update and will no longer open. What can I do?
Same issue - however firefox will open but I can not click on only of my tool bar shortcuts - the writing on the google age is greyed out so I can not click on anything. Still no resolution? I have deleted the folders and re-installed - it will open and then locks and it will not work????
-
Flash Builder 4.6 won't start on my Mac 10.7
I'm having trouble launching Flash Builder 4.6. It worked for a while, but now it boots, says its loading the workbench and then it silently quits. I've tried deleting the metadata folder and also renaming my workspace folder. Are there any other solutions to this problem?
Ask in the FB forum. This sounds like a program related issue, not an install problem.
Mylenium -
Mac Mini won't start after installing OS X 10.6.3
My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?
If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
So, following the above guidelines, reinstall 10.6.3. -
HELP! My Mother in Law's IMAC - OS 10.3 won't start in safe mode!
She had a power outage last night, with the computer on. She just gets a screen with the apple and spinning gear. We can't start it in safe mode or with the install disc. She got something when we started up in single user mode, but she said there was no place to type in any commands - just lots of writing that does not make sense to us. PLEASE HELP!!!!!!
sciteacher77:
Here are three articles from Apple's Knowledge base dealing with different startup issues. Look through the first two and see if they offer any help. Then go to the third and see if you can get it to work.
Your Mac won't start up in Mac OS X (Mac OS X 10.3.9 or earlier)
A flashing question mark appears when you start your Mac
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
Good luck.
cornelius -
Photoshop Elements 4 suddenly won't start up
I last used Elements on 7th July. It was fine. Since 21st july, it won't start - goes through all the brushes loading etc but then quits.
I have:
Removed all Adobe programmes, prefs etc using AppZapper
Cleaned up using Adobe's maccs3clean script
Repaired disk permissions (a huge long list there, why?)
Re-installed Elements 4.0 between some of these stages.
No luck! It still crashes at the same point. Could I try reverting to an earlier system state via TimeCapsule, if so how do I do that?
Or, re-install the OS (my Leopard version would be quite old now) and do a total update?
Advice very welcome,This sounds helpful! Okay, here's the log contents:
Process: Photoshop Elements 4.0 [231]
Path: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0
Identifier: com.adobe.Photoshop.Elements
Version: 4.0 (20060216.m.125) (4.0)
Code Type: PPC (Translated)
Parent Process: launchd [127]
Interval Since Last Report: 7584 sec
Crashes Since Last Report: 1
Per-App Interval Since Last Report: 22 sec
Per-App Crashes Since Last Report: 1
Date/Time: 2009-07-23 17:51:10.468 +0100
OS Version: Mac OS X 10.5.7 (9J61)
Report Version: 6
Anonymous UUID: 2EA2E06C-C896-4A79-A14E-62734BAC1D12
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
Crashed Thread: 0
Thread 0 Crashed:
0 ??? 0x81507002 0 + 2169532418
Thread 1:
0 ??? 0x800bc286 0 + 2148254342
1 ??? 0x800c3a7c 0 + 2148285052
2 translate 0xb818b6ea CallPPCFunctionAtAddressInt + 202886
3 ??? 0x800ed155 0 + 2148454741
4 ??? 0x800ed012 0 + 2148454418
Thread 2:
0 translate 0xb81529ef spinlockwrapper + 90931
1 translate 0xb8183633 CallPPCFunctionAtAddressInt + 169935
2 translate 0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3 translate 0xb80dfb0b 0xb8000000 + 916235
4 ??? 0x812cb9f6 0 + 2167192054
Thread 3:
0 translate 0xb8152863 spinlockwrapper + 90535
1 translate 0xb816e79d CallPPCFunctionAtAddressInt + 84281
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813ce79 spinlockwrapper + 1981
6 translate 0xb8011b64 0xb8000000 + 72548
Thread 4:
0 translate 0xb8152863 spinlockwrapper + 90535
1 translate 0xb816e79d CallPPCFunctionAtAddressInt + 84281
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813ce79 spinlockwrapper + 1981
6 translate 0xb8011b64 0xb8000000 + 72548
Thread 5:
0 translate 0xb8152b34 spinlockwrapper + 91256
1 translate 0xb8167dce CallPPCFunctionAtAddressInt + 57194
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813d75f spinlockwrapper + 4259
6 translate 0xb8011b64 0xb8000000 + 72548
Thread 6:
0 translate 0xb8152c24 spinlockwrapper + 91496
1 translate 0xb816c825 CallPPCFunctionAtAddressInt + 76225
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813d75f spinlockwrapper + 4259
6 translate 0xb8011b64 0xb8000000 + 72548
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0xb813cfcc ecx: 0x00000001 edx: 0x00000000
edi: 0xb81d8794 esi: 0xb81d8770 ebp: 0x8080d180 esp: 0xb7fffacc
ss: 0x0000001f efl: 0x00010217 eip: 0x81507002 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x00000000
Binary Images:
0xb8000000 - 0xb81d7fe7 translate ??? (???) /usr/libexec/oah/translate
Translated Code Information:
Rosetta Version: 21.03
Args: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 -psn0127007
Exception: EXCBADACCESS (0x0001)
Thread 0: (0xb009a83c, 0xb81529ef)
0x00000000: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : + 0
0x958f515c: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore : TS_exception_listenerthread + 112
0x94edc1d4: /usr/lib/libSystem.B.dylib : _pthreadbody + 40
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x94e52120 ctr: 0x94e4b1f0
r00: 0xffffffe1 r01: 0xf0080de0 r02: 0xa08b313c r03: 0x03970000
r04: 0x00000002 r05: 0x00000000 r06: 0x00000054 r07: 0x00005007
r08: 0x00000000 r09: 0x00000000 r10: 0x00000000 r11: 0xa08b268c
r12: 0x94e4b1f0 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
r24: 0x03970000 r25: 0x00000054 r26: 0x00005007 r27: 0x00000000
r28: 0x00000000 r29: 0x00000002 r30: 0x00000002 r31: 0x958f50f4
Thread 1: (0xb011cd64, 0xb8152863)
0x9592b818: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore : _MPWaitOnSemaphore + 40
0x18297428: /Applications/Adobe Photoshop Elements 4.0/Plug-Ins/Extensions/MultiProcessor Support.plugin/Contents/MacOS/MultiProcessor Support : ThreadFunction(void*) + 64
0x9591742c: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore : _PrivateMPEntryPoint + 80
0x94edc1d4: /usr/lib/libSystem.B.dylib : _pthreadbody + 40
0x00000000: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x9592b85c ctr: 0x94e4b260
r00: 0xffffffda r01: 0xf0101da0 r02: 0x18130960 r03: 0x00005307
r04: 0x7fffffff r05: 0x00000000 r06: 0x00000000 r07: 0x00000000
r08: 0x00000040 r09: 0x0321f580 r10: 0x00000040 r11: 0xa08b2a78
r12: 0x94e4b260 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
r24: 0x00000000 r25: 0x00000000 r26: 0x00000000 r27: 0x182973fc
r28: 0x80000000 r29: 0x7fffffff r30: 0x00000000 r31: 0x9592b7fc
Thread 2: (0xb02a2d38, 0xb8152c24)
0x94e8e32c: /usr/lib/libSystem.B.dylib : _pthread_condwait + 1260
0x1b6ff04c: /System/Library/PrivateFrameworks/OpenTransport.framework/Versions/A/OpenTransp ort : _CarbonOperationThreadFunc + 136
0x94edc1d4: /usr/lib/libSystem.B.dylib : _pthreadbody + 40
0x00000000: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x94e8e470 ctr: 0x94e564fc
r00: 0x0000014e r01: 0xf0284a50 r02: 0xf0284a90 r03: 0x00006003
r04: 0x00006103 r05: 0x00000000 r06: 0x00000000 r07: 0x00000000
r08: 0x00000000 r09: 0x00000001 r10: 0x94e8de0c r11: 0xa08b2934
r12: 0x94e564fc r13: 0xf0284b28 r14: 0xf0284b24 r15: 0xf0284b20
r16: 0xf0284b1c r17: 0xf0284b18 r18: 0xf0284ce8 r19: 0x00000000
r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
r24: 0x00000000 r25: 0x00000000 r26: 0x00000000 r27: 0xa08ade54
r28: 0x1d1c6ab0 r29: 0x220ad000 r30: 0x1d1c6a58 r31: 0x94e8de54
Thread 3: (0xb019ed64, 0xb8152863)
0x9592b818: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore : _MPWaitOnSemaphore + 40
0x01b64890: @executable_path/../Frameworks/AdobeACE.framework/Versions/A/AdobeACE : ACESemaphoreList::Wait(unsigned long) + 36
0x01b64adc: @executable_path/../Frameworks/AdobeACE.framework/Versions/A/AdobeACE : ACEMPThread::Task() + 76
0x01b644a0: @executable_path/../Frameworks/AdobeACE.framework/Versions/A/AdobeACE : _TaskGlue + 28
0x9591742c: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore : _PrivateMPEntryPoint + 80
0x94edc1d4: /usr/lib/libSystem.B.dylib : _pthreadbody + 40
0x00000000: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x9592b85c ctr: 0x94e4b260
r00: 0xffffffda r01: 0xf0182d20 r02: 0x19cb5100 r03: 0x00005903
r04: 0x7fffffff r05: 0x00000000 r06: 0x00000000 r07: 0x00000000
r08: 0x01b483b4 r09: 0x0321f580 r10: 0x3effe000 r11: 0xa08b2a78
r12: 0x94e4b260 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
r24: 0x00000000 r25: 0x00000000 r26: 0x00000000 r27: 0x00000000
r28: 0x00000000 r29: 0x7fffffff r30: 0x00000000 r31: 0x9592b7fc
Thread 4: Crashed (0xb7fffacc, 0x81507002)
0x200ba4fc: No symbol
0x2053d1dc: No symbol
0x2006f34c: No symbol
0x200b0034: No symbol
0x202f2c10: No symbol
0x2025f700: No symbol
0x20385308: No symbol
0x02e3cbe0: @executable_path/../Frameworks/AdobeOperaMgr.framework/Versions/A/AdobeOperaMgr : OMInitialize + 124
0x02e3cd14: @executable_path/../Frameworks/AdobeOperaMgr.framework/Versions/A/AdobeOperaMgr : OMCreateBrowser + 68
0x00872858: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : PercentageWindowVisible(TWindow*) + 320496
0x00871840: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : PercentageWindowVisible(TWindow*) + 316376
0x0087ac40: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : PercentageWindowVisible(TWindow*) + 354264
0x0087beb8: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : PercentageWindowVisible(TWindow*) + 358992
0x00870cf4: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : PercentageWindowVisible(TWindow*) + 313484
0x000a0150: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : IsTargetInView(TView*) + 3616
0x000a0150: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : IsTargetInView(TView*) + 3616
0x000a0150: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : IsTargetInView(TView*) + 3616
0x0009f1a8: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : NewObjectBySignature(unsigned long, CStr255 const&) + 143648
0x00841014: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : PercentageWindowVisible(TWindow*) + 117676
0x00840fb4: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : PercentageWindowVisible(TWindow*) + 117580
0x00e02064: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : XPEPLaunch::StartApp(unsigned short const*, unsigned short const*, unsigned short const*, void**) + 2386236
0x00e0008c: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : XPEPLaunch::StartApp(unsigned short const*, unsigned short const*, unsigned short const*, void**) + 2378084
0x00040b80: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : LookupErrString(short, short, ZString&) + 89920
0x00b5d8f4: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : PercentageWindowVisible(TWindow*) + 3380364
0x00b55fc0: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : PercentageWindowVisible(TWindow*) + 3349336
0x00002d68: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : dyldstub_bindinghelper + 1096
0x00002b00: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : dyldstub_bindinghelper + 480
0x00002894: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : __code_start_ + 512
0x000026c4: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : __code_start_ + 48
0x00000000: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x200ba520 ctr: 0x94e86720
r00: 0x00000004 r01: 0xbfff8900 r02: 0x2067a448 r03: 0x220dda00
r04: 0x00000000 r05: 0x00000001 r06: 0xfefefeff r07: 0x80808080
r08: 0x00450050 r09: 0x220dda0c r10: 0x00000000 r11: 0x80008000
r12: 0x80808080 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x1fb04d70 r17: 0x03cc4c00 r18: 0x00000000 r19: 0x203840c4
r20: 0x20383c30 r21: 0x20383cf0 r22: 0x2037f580 r23: 0x1fb08610
r24: 0x2025f40c r25: 0x206192a8 r26: 0x1fb04e10 r27: 0x00000000
r28: 0x00000005 r29: 0x1fb0884c r30: 0x00000000 r31: 0x200ba448
Thread 5: (0xb0220d68, 0xb8152b34)
0x1b6fde34: /System/Library/PrivateFrameworks/OpenTransport.framework/Versions/A/OpenTransp ort : BSDwatchevent + 44
0x1b702fb8: /System/Library/PrivateFrameworks/OpenTransport.framework/Versions/A/OpenTransp ort : _CarbonSelectThreadFunc + 204
0x94edc1d4: /usr/lib/libSystem.B.dylib : _pthreadbody + 40
0x00000000: /Applications/Adobe Photoshop Elements 4.0/Photoshop Elements 4.0.app/Contents/MacOS/Photoshop Elements 4.0 : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x1b6fdea0 ctr: 0x94ea0760
r00: 0x00000000 r01: 0xf0203d60 r02: 0x1b71b010 r03: 0x000000e8
r04: 0xf0203e34 r05: 0x00000000 r06: 0x00000000 r07: 0x01000000
r08: 0x00000000 r09: 0x01000000 r10: 0x00000000 r11: 0x1b71b42c
r12: 0x94ea0760 r13: 0x1b71b010 r14: 0x00000000 r15: 0x1b71b010
r16: 0x1b71b008 r17: 0xf0203e18 r18: 0x1b722efc r19: 0xf0203e0c
r20: 0xf0203dfc r21: 0xf0203e08 r22: 0xf0203e34 r23: 0x00000000
r24: 0x1b722efc r25: 0x1b71b010 r26: 0x00000000 r27: 0xf0203e04
r28: 0xf0203e34 r29: 0x00000000 r30: 0x1b71b010 r31: 0x1b702efc -
Hi all, before I explain my problem, I have spent the last 6 hours searching google and these forums for the answer, so I apologize if I have missed the solution somewhere.
Its 1:38pm here in Australia, and since I woke up today I have been trying to install the drivers for my amd 6950 2gb card.
I "finished" my first ever arch linux install last night, and installed the catalyst and catalyst-utils packages from the unnofficial repositories as I thought they were the newest. They seem to have worked, I am now in xfce4 wm(not as my environment), and everything is working great. However, because my monitor uses hdmi, whenever I do a fresh install of drivers the screen is scaled down by 15%, as this is for some reason a default in the driver. I usually just start amdcccle as root and fix it, but amdcccle won't start.
tl;dr, amdccle won't start either through terminal or started through xfce app menu. Do I need to reinstall all my drivers or just install the amdccle package. sudo pacman -S amdcccle says "cannot find package".
I am loving the speed of arch linux so far, not having 100+ apps that I don't use is nice.
EDIT: sorry, forgot the error:
amdcccle: error while loading shared libraries: libQtGui.so.4: cannot open shared object file: No such file or directory
Edit2: Wow, I am tired. I just realized I hadn't installed Qt.
If an admin/mod wants to delete this thread then go for it, otherwise Ill i leave the solution to the problem here for other new users like myself.
To fix just run
pacman -S qt
Last edited by jc-kakashi (2012-03-10 00:55:23)I followed wiki for uninstall catalyst, reboot, then clean install of catalyst, reboot, it's the same.
But I've found a way to make it work : disable lxdm and reboot.
Then I remove /etc/ati/amdpcsdb at each boot, before running startx. Then I'm able to open amdcccle, check configuration, fglrxinfo gives :
[jledun@io0 ~]$ fglrxinfo
display: :0 screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: AMD Radeon HD 8650G
OpenGL version string: 4.3.12614 Compatibility Profile Context 13.25.18
If I reboot again, the problem appears again, then I kill X, remove /etc/ati/amdpcsdb again and it works.
I'm going to see if the problem is the same with razor-qt.
Maybe you are looking for
-
My touch screen fell victim to the same issue many people have with this phone - the touch screen has become only effective for very limited items - mostly just Contacts. I've tried bluetooth and plugging in the phone, shutting it down and repowering
-
Can I use Streaming Video in Java Application?
Will i be able to use Streaming Video in Java Application, if yes can anyhow out there pls teach me how to do it... thanks...
-
Table of Contents Issue/Question
Hi everyone, I hope I can put my question accurately into words. I'm working on a 450 page product catalog in Indesign CS5 for the mac. The catalog has 7 main sections, in which there are numerous smaller sections. I need to create a table of conte
-
I have a class that extends JDialog to display images in a slide show. I use the action performed method of a button in my main Jframe Application to start the slideshow . When the button is clicked the JDialog opens multiple windows and the images a
-
Exe build error involvving internal.llb
Hi all, I have built many exe's, but for some reason this one is being difficult! I get an error which states: Error 1003 occurred at \\Rochester\mtp\Test Rigs\NC4\NC4 Air Cap\Code Development\Air cap v2.0\exe\internal.llb\Air Cap inspection Rig v2.