ISynch has failed after successful use
I have a new iMac and a SonyEricsson w850i. I have used iSynch satisfactorily to synch these. I tried yesterday to use it with Bluetooth to synch my Calendar and Contacts with the files on my laptop, but it would not do it. Since then I can no longer synch with the mobile phone: once the process is started the phone immediately drops the connection. I have tried turning both iMac and phone off and on again but the problem persists. What can be done?
First, try clicking "Reset Sync History..." in iSync preferences, and see if that allows it to sync.
If not, work through the suggestions on the page below:
http://www.feisar.com/isync_tips.html
Julian
Aluminium 20" iMac 2.4Ghz, 2GB RAM Mac OS X (10.5.2)
Apple Required Disclaimer: "I may receive some form of compensation, financial or otherwise, from my recommendation or link." (but only if you choose to click on the Google Ads on the linked page).
Similar Messages
-
Datasocket server seems to fail after continuous use.
The Datasocket server seems to fail after continuous use. (Labview 7.1 on XP)
I have a data acquistion system that collects data and presents it to the operator. Then I have from 1-3 remote units that can connect via DS to the acquistion unit to view the data. As a general rule things work dandy! I have the data published from the front panel of one VI and subscribed to by the remote VI(s). However it seems that after some indeterminent time the DS just stops publishing data and my remote units go into alarm indicating that they can no longer get data. If I shutdown and then restart the DS server then things seem to clear up and work again.
Anyone seen this type of problem? Unfortunately my app is pretty large and it acquires data from 26 field units so its not real practical to post the code!
I wonder if using the DS VI's would change performance as opposed to the front panel publishing/subscribing that I currently do? Or can DS just not handle the load, should I change to a TCP/IP handshaking?
Thanks!
~GoldHere's the basic piece of code. The outer case structure was used because that program already had some DS related stuff and I wanted to wait before I start checking to avoid disturbing it. I added the array at the bottom for some logging so I could check when it happened, but I haven't been called for it since, so that array has proved unnecessary.
Try to take over the world!
Attachments:
DSerror.JPG 56 KB -
Has anyone had success using SharePoint and FrameMaker 10 together using CMS?
Has anyone had success using SharePoint and FrameMaker 10 together using CMS?
Thanks for reminding to at least update the results thus far.
Update 4:
I did get quite a bit of support initially although slowly over a period of a month or so. After Adobe FM support and my SharePoint systems engineer reviewed how FM10 was setup on my computer (which I am the admin for our department’s SP site) and how it interfaces with our SharePoint 2010 Enterprise Edition, there was two conclusions:
Basically Adobe FM Support said that FM10 did not support claims-based authentication and they can no longer help me. They said it will work with FM11 when it comes out.
My SP Systems Engineer, said that FM10 is connecting to SP 2010 just fine but that the FM10 has a software glitch that causes FM10 lose control when executing checkout procedure within FM10. I can checkout and edit that same file in SP with no problems.
About a month later, I upgraded to FM11 and ran into the same problem. I attempted to get Adobe FM Support to help and they said they will look into and get back to me. That was in July and I have not heard anything more from them, and to be honest, my schedule has been extremely busy the last 5 months that I have not had time to pursue it any further.
Needless to say, I was very disappointed with the SP interface and, overall, the lackluster support I received from Adobe. Having a working SP interface was one of the criteria for purchasing TCS3.5 (and subsequent upgrade) in the first place.
One thing of note, we migrated from SP 2007 to SP 2010 in February 2011 and, at the time of Adobe support, I still had access to my SP 2007 site. FM10 and FM11 had to no issues working with SP2007. Unfortunately, SP 2007 is not an option for me anymore.
Also, another observation of FM10/11 not working with SP 2010, it seems that FM10/11 is automatically configured to work with SharePoint Drafts folder locally when connecting to the SharePoint library. This worked just fine with SP 2007 but SP 2010 does not use SharePoint Drafts folder locally the same way (the programming changed, don’t recall where I saw it, probably when searching this issue online) and I suspect that is one of the main issues why it does not work correctly.
So at this time, I have not found a working solution to this problem. -
NI cards have been qualified to operate only to zero degrees C. I need serial abd GPIB PCI cards that operate to -20C for military application. Has anyone had success using these cards at this lower operating temperature?
Hi,
I am not sure if this helps, but the ENET-232 is spec'd to operation at -40 degrees C.
Best Regards,
Aaron K.
Application Engineer
National Instruments -
Upgraded new iPad to iOS 5 after successfully using the machine for two weeks. The apps I downloaded are still here, checked for updates, all okay. However, when I try to use iBooks app or even USA Today, icon shakes, settles down then nothing else happens. Several tries, settings appear correct. Suggestions? Safari operates correctly, music icon matches (not from iTunes, simply music on my MacPro and iPod). Is Cloud the issue, perhaps? But everything worked before the upgrade. Using my home network. Hope this info suffices. Appreciate any guidance.
Problem solved. Saw the solution in a more recent post. Downloaded a free app, then all my other apps started to work again.
-
CSS: "authentication failed" after successful fingerprint authentication - twice!
T61p
CSS: 8.10.0006.00
Vista 32 Ult
After successful fingerprint login, CSS states that the Windows password had been changed (it hasn't) and then asked me to verify that the CSS password matched my Windows password; this failes, even though the password entered is correct. This dialog pops up until it is cancelled.
I've also lost the ability to use my fingerprint reader to login to websites, it says that
- the print is okay, with that green checkmark, but then
- proceeds to say "authentication failed"
The password manager does not show up any more if started.
@ lenovo: any ideas, this is a very annoying one! And it is old, I think. Any ideas, before I go and buy
an Apple?
Moderator Note; please update your profile with your correct country location as per the forum rules. Products, options and services vary from market to market. Knowing your location helps us help you
Message Edited by andyP on 06-21-2008 09:54 PMI have the same issue here.
The fingerprint software is working perfectly and it is properly linked with the Windows password so I can logon with no problems. However, right after I get the message the password has been changed when it hasn't.
The issues start when I need to use the Thinkvantage Password Manager or any other CCS applications. It does recognize my finger but it says "authentication failed".
I have emailed Lenovo and they recommended me to removed the CCS and the fingerprint software. I did it and it didn't work. Then they said I should take my laptop to a service center because it is no longer in warantee period.
In my case, all these issues began when I updated the CCS to the newer version (8.2)
I have read in other forums that it has to do with TPM or security chip encryption. It seems the CCS has not taken control over it. They state all will be fixed once the chip is clear which is done thru the BIOS>Security Chip>Clear Encryption. The big problem is that all encrypted data is erased in the process!!!
I have used the password manager for so long now with no problems that I have forgotten most of the keywords.
T60
Vista Ultimate 32 bits
CCS 8.2 -
IPhoto 11 - Edit tools fail after initial use of program
Running 10.6.8 (all updates complete) on new MacBook. Began editing newly imported photos - edit features failed after first 50 photos. I have tried...
* updated all Mac Software
* deleted user iPhoto preferences, emptied trash, reopened
* repaired iPhoto library, etc....
Has this happened to anyone else? Any suggestions for repair/recovery?Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it does then a reinstall of iPhoto seems warranted. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iPhoto from the disk it came on originally.
OT -
Has anyone had success using the player in a facebook newsfeed
I'd like to use the player as a previewer in a facebook newsfeed. Has anyone had success? Is there a recipe for this?
Thanks,
LeoThe Juniper VPN is a SSL-based VPN solution whereas the native client supports L2TP and PPTP only - in other words they're completely different beasts.
That said, you shouldn't have any issue connecting to the SSL-VPN. I do it almost daily. You may need to be running the latest (or at least, recent) software on the Juniper box, though - earlier versions of the Juniper software had problems. -
Interactive logon process initialization has failed after system state is restored from backup
Recently one of my Windows 2008 server was restored from system state backup, and below error appears before during startup, before logon screen:
"interactive logon process initialization has failed. please consult the event log for more details"
I do not have recovery disk, also repair didn't work, any other solutions?
Thanks.Hi Justin,
I would suggest you to use sfc to check if there is any systemfiles corrupted :
1. boot from cd
2. sfc /scannow /offbootdir=X:\ /offwindir=Y:\windows (X is boot partition , Y is windows system files partition )
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
T400 realtek wifi fails after short use, given IOMMU errors in dmesg
Hello, thanks for reading.
The title explains the problem pretty well. I can connect to any given network just fine through wicd, but after a short bit of use the networking entirely stops and if I try to make any changes I get what I assume is a kernel panic and the whole system stops responding, short of the caps lock blinking.
Relevant outputs include:
dmesg:
Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Oct 23 10:03:24 CEST 2009
Command line: root=/dev/disk/by-uuid/746ab7a4-69f4-450c-bfe0-3a9f9cdd7a09 ro vga=791
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable)
BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
BIOS-e820: 00000000bf8a7000 - 00000000bf9b7000 (usable)
BIOS-e820: 00000000bf9b7000 - 00000000bfa0f000 (reserved)
BIOS-e820: 00000000bfa0f000 - 00000000bfac6000 (usable)
BIOS-e820: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
BIOS-e820: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
BIOS-e820: 00000000bfad4000 - 00000000bfad8000 (reserved)
BIOS-e820: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
BIOS-e820: 00000000bfadc000 - 00000000bfadf000 (reserved)
BIOS-e820: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
BIOS-e820: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
BIOS-e820: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
BIOS-e820: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000023c000000 (usable)
DMI present.
last_pfn = 0x23c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DBFFF uncachable
DC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 23C000000 mask FFC000000 uncachable
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask FC0000000 write-back
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (usable)
modified: 0000000000001000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009ec00 (usable)
modified: 000000000009ec00 - 00000000000a0000 (reserved)
modified: 00000000000dc000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bf8a1000 (usable)
modified: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
modified: 00000000bf8a7000 - 00000000bf9b7000 (usable)
modified: 00000000bf9b7000 - 00000000bfa0f000 (reserved)
modified: 00000000bfa0f000 - 00000000bfac6000 (usable)
modified: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
modified: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
modified: 00000000bfad4000 - 00000000bfad8000 (reserved)
modified: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
modified: 00000000bfadc000 - 00000000bfadf000 (reserved)
modified: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
modified: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
modified: 00000000bfb08000 - 00000000bfd0f000 (reserved)
modified: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
modified: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
modified: 00000000bfdff000 - 00000000bfe00000 (usable)
modified: 00000000bfe00000 - 00000000c0000000 (reserved)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fed00000 - 00000000fed00400 (reserved)
modified: 00000000fed10000 - 00000000fed14000 (reserved)
modified: 00000000fed18000 - 00000000fed1a000 (reserved)
modified: 00000000fed1c000 - 00000000fed90000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ff800000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 000000023c000000 (usable)
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bfe00000
0000000000 - 00bfe00000 page 2M
kernel direct mapping tables up to bfe00000 @ 8000-c000
init_memory_mapping: 0000000100000000-000000023c000000
0100000000 - 023c000000 page 2M
kernel direct mapping tables up to 23c000000 @ a000-14000
RAMDISK: 37f36000 - 37fef4e4
ACPI: RSDP 00000000000f64e0 00024 (v02 LENOVO)
ACPI: XSDT 00000000bfd6a273 0009C (v01 LENOVO TP-7U 00002160 LTP 00000000)
ACPI: FACP 00000000bfd6a400 000F4 (v03 LENOVO TP-7U 00002160 LNVO 00000001)
ACPI: DSDT 00000000bfd6a7db 0F3FB (v01 LENOVO TP-7U 00002160 MSFT 03000000)
ACPI: FACS 00000000bfd8e000 00040
ACPI: SSDT 00000000bfd6a5b4 00227 (v01 LENOVO TP-7U 00002160 MSFT 03000000)
ACPI: ECDT 00000000bfd79bd6 00052 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
ACPI: APIC 00000000bfd79c28 00078 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
ACPI: MCFG 00000000bfd79ca0 0003C (v01 LENOVO TP-7U 00002160 LNVO 00000001)
ACPI: HPET 00000000bfd79cdc 00038 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
ACPI: SLIC 00000000bfd79dc2 00176 (v01 LENOVO TP-7U 00002160 LTP 00000000)
ACPI: BOOT 00000000bfd79f38 00028 (v01 LENOVO TP-7U 00002160 LTP 00000001)
ACPI: ASF! 00000000bfd79f60 000A0 (v16 LENOVO TP-7U 00002160 PTL 00000001)
ACPI: SSDT 00000000bfd8d213 0054F (v01 LENOVO TP-7U 00002160 INTL 20050513)
ACPI: TCPA 00000000bfb07000 00032 (v00 00000000 00000000)
ACPI: DMAR 00000000bfb06000 000D8 (v01 00000001 00000000)
ACPI: SSDT 00000000bfad3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: SSDT 00000000bfad2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 00000000bfad1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
(8 early reservations) ==> bootmem [0000000000 - 023c000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 00016837d0] TEXT DATA BSS ==> [0001000000 - 00016837d0]
#3 [0037f36000 - 0037fef4e4] RAMDISK ==> [0037f36000 - 0037fef4e4]
#4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
#5 [0001684000 - 000168414c] BRK ==> [0001684000 - 000168414c]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000f000] PGTABLE ==> [000000a000 - 000000f000]
found SMP MP-table at [ffff8800000f6520] f6520
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0023c000
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000000 -> 0x00000001
0: 0x00000006 -> 0x0000009e
0: 0x00000100 -> 0x000bf8a1
0: 0x000bf8a7 -> 0x000bf9b7
0: 0x000bfa0f -> 0x000bfac6
0: 0x000bfdff -> 0x000bfe00
0: 0x00100000 -> 0x0023c000
On node 0 totalpages: 2079234
DMA zone: 56 pages used for memmap
DMA zone: 107 pages reserved
DMA zone: 3830 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 766625 pages, LIFO batch:31
Normal zone: 17696 pages used for memmap
Normal zone: 1276640 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000001000 - 0000000000006000
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000
PM: Registered nosave memory: 00000000bf9b7000 - 00000000bfa0f000
PM: Registered nosave memory: 00000000bfac6000 - 00000000bfad1000
PM: Registered nosave memory: 00000000bfad1000 - 00000000bfad4000
PM: Registered nosave memory: 00000000bfad4000 - 00000000bfad8000
PM: Registered nosave memory: 00000000bfad8000 - 00000000bfadc000
PM: Registered nosave memory: 00000000bfadc000 - 00000000bfadf000
PM: Registered nosave memory: 00000000bfadf000 - 00000000bfb06000
PM: Registered nosave memory: 00000000bfb06000 - 00000000bfb08000
PM: Registered nosave memory: 00000000bfb08000 - 00000000bfd0f000
PM: Registered nosave memory: 00000000bfd0f000 - 00000000bfd9f000
PM: Registered nosave memory: 00000000bfd9f000 - 00000000bfdff000
PM: Registered nosave memory: 00000000bfe00000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages at ffff880028035000, static data 82400 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2047095
Kernel command line: root=/dev/disk/by-uuid/746ab7a4-69f4-450c-bfe0-3a9f9cdd7a09 ro vga=791
PID hash table entries: 4096 (order: 12, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 8114824k/9371648k available (3628k kernel code, 1054712k absent, 201116k reserved, 1500k data, 484k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
NR_IRQS:768
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2527.220 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.04 BogoMIPS (lpj=8424066)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Counters: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic counters: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose counters: 3
... counter mask: 0000000700000003
ACPI: Core revision 20090521
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5055.55 BogoMIPS (lpj=8423280)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (10112.59 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e3ffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: Power Resource [PUBS] (on)
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: reg 10 64bit mmio: [0xfc226800-0xfc22680f]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:19.0: reg 10 32bit mmio: [0xfc200000-0xfc21ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xfc225000-0xfc225fff]
pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc226c00-0xfc226fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc220000-0xfc223fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df]
pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc227000-0xfc2273ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x1c40-0x1c47]
pci 0000:00:1f.2: reg 14 io port: [0x1834-0x1837]
pci 0000:00:1f.2: reg 18 io port: [0x1838-0x183f]
pci 0000:00:1f.2: reg 1c io port: [0x1830-0x1833]
pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc226000-0xfc2267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfc227400-0xfc2274ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xcfff0000-0xcfffffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xcff00000-0xcfffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:03:00.0: reg 10 io port: [0x3000-0x30ff]
pci 0000:03:00.0: reg 14 32bit mmio: [0xf4200000-0xf4203fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xf4200000-0xf42fffff]
pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf40fffff]
pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf4100000-0xf41fffff]
pci 0000:15:00.0: reg 10 32bit mmio: [0xf4300000-0xf4300fff]
pci 0000:15:00.0: supports D1 D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.0: PME# disabled
pci 0000:15:00.1: reg 10 32bit mmio: [0xf4301000-0xf43017ff]
pci 0000:15:00.1: supports D1 D2
pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.1: PME# disabled
pci 0000:15:00.2: reg 10 32bit mmio: [0xf4301800-0xf43018ff]
pci 0000:15:00.2: supports D1 D2
pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.2: PME# disabled
pci 0000:15:00.3: reg 10 32bit mmio: [0xf4301c00-0xf4301cff]
pci 0000:15:00.3: supports D1 D2
pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.3: PME# disabled
pci 0000:15:00.4: reg 10 32bit mmio: [0xf4302000-0xf43020ff]
pci 0000:15:00.4: supports D1 D2
pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.4: PME# disabled
pci 0000:15:00.5: reg 10 32bit mmio: [0xf4302400-0xf43024ff]
pci 0000:15:00.5: supports D1 D2
pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.5: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x6000-0x9fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xf4300000-0xf7ffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf0000000-0xf3ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff has been reserved
system 00:00: iomem range 0xc4000-0xc7fff has been reserved
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xcc000-0xcffff has been reserved
system 00:00: iomem range 0xd0000-0xd3fff has been reserved
system 00:00: iomem range 0xdc000-0xdffff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11ff has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x167f has been reserved
system 00:02: ioport range 0x1680-0x169f has been reserved
system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x2000-0x2fff
pci 0000:00:01.0: MEM window: 0xcff00000-0xcfffffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: 0x3000-0x3fff
pci 0000:00:1c.1: MEM window: 0xf4200000-0xf42fffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.3: IO window: 0x4000-0x4fff
pci 0000:00:1c.3: MEM window: 0xf8000000-0xf9ffffff
pci 0000:00:1c.3: PREFETCH window: 0x000000f4000000-0x000000f40fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
pci 0000:00:1c.4: IO window: 0x5000-0x5fff
pci 0000:00:1c.4: MEM window: 0xfa000000-0xfbffffff
pci 0000:00:1c.4: PREFETCH window: 0x000000f4100000-0x000000f41fffff
pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
pci 0000:15:00.0: IO window: 0x006000-0x0060ff
pci 0000:15:00.0: IO window: 0x006400-0x0064ff
pci 0000:15:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
pci 0000:15:00.0: MEM window: 0xc0000000-0xc3ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
pci 0000:00:1e.0: IO window: 0x6000-0x9fff
pci 0000:00:1e.0: MEM window: 0xf4300000-0xf7ffffff
pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f3ffffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xcff00000-0xcfffffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:03: resource 1 mem: [0xf4200000-0xf42fffff]
pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:05: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:05: resource 2 pref mem [0xf4000000-0xf40fffff]
pci_bus 0000:0d: resource 0 io: [0x5000-0x5fff]
pci_bus 0000:0d: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:0d: resource 2 pref mem [0xf4100000-0xf41fffff]
pci_bus 0000:15: resource 0 io: [0x6000-0x9fff]
pci_bus 0000:15: resource 1 mem: [0xf4300000-0xf7ffffff]
pci_bus 0000:15: resource 2 pref mem [0xf0000000-0xf3ffffff]
pci_bus 0000:15: resource 3 io: [0x00-0xffff]
pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:16: resource 0 io: [0x6000-0x60ff]
pci_bus 0000:16: resource 1 io: [0x6400-0x64ff]
pci_bus 0000:16: resource 2 pref mem [0xf0000000-0xf3ffffff]
pci_bus 0000:16: resource 3 mem: [0xc0000000-0xc3ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 741k freed
Simple Boot Flag at 0x35 set to 0x1
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1257200918.329:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15852
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004100000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 484k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
Switched to high resolution mode on CPU 0
ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 29
Switched to high resolution mode on CPU 1
ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 29
ata3: DUMMY
ata4: DUMMY
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ATA-7: SAMSUNG MMCQE28G8MUP-0VA, VAM08L1Q, max UDMA/100
ata1.00: 250069680 sectors, multi 16: LBA48
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/100
ata1.00: configured for UDMA/100
ata1: EH complete
scsi 0:0:0:0: Direct-Access ATA SAMSUNG MMCQE28G VAM0 PQ: 0 ANSI: 5
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:79:00:00:00:a0 succeeded
ata2.00: ACPI cmd e3/00:01:00:00:00:a0 succeeded
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX12, max UDMA/133
ata2.00: ACPI cmd e3/00:79:00:00:00:a0 succeeded
ata2.00: ACPI cmd e3/00:01:00:00:00:a0 succeeded
ata2.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX12 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda3): INFO: recovery required on readonly filesystem
EXT4-fs (sda3): write access will be enabled during recovery
EXT4-fs (sda3): barriers enabled
EXT4-fs (sda3): delayed allocation enabled
EXT4-fs: file extents enabled
kjournald2 starting: pid 596, dev sda3:8, commit interval 5 seconds
EXT4-fs: mballoc enabled
EXT4-fs (sda3): orphan cleanup on readonly fs
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 30918
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 30917
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 30916
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 30915
EXT4-fs (sda3): 4 orphan inodes deleted
EXT4-fs (sda3): recovery complete
EXT4-fs (sda3): mounted filesystem with ordered data mode
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
udev: starting version 146
input: PC Speaker as /devices/platform/pcspkr/input/input2
ACPI: SSDT 00000000bfad6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 00000000bfad4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
iTCO_vendor_support: vendor-support=0
Monitor-Mwait will be used to enter C-1 state
i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Monitor-Mwait will be used to enter C-2 state
[drm] Initialized drm 1.1.0 20060810
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 00000000bfad5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: SSDT 00000000bfad5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Non-volatile memory driver v1.3
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
ACPI: AC Adapter [AC] (off-line)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SLPB]
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'TKIP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'WEP'
Linux kernel driver for RTL8192 based WLAN cards
Copyright (c) 2007-2008, Realsil Wlan
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11)
rtl819xSE 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
rtl819xSE 0000:03:00.0: setting latency timer to 64
ricoh-mmc: Controller is now disabled.
===============>NIC 8192SE
uhci_hcd: USB Universal Host Controller Interface driver
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Dot11d_Init()
IRQ 17
ACPI: WMI: Mapper loaded
ACPI: Battery Slot [BAT0] (battery present)
acpi device:0a: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/device:09/input/input6
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (33 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (42 C)
thinkpad_acpi: ThinkPad ACPI Extras v0.23
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7UET66WW (2.16 ), EC 7VHT12WW-1.01
thinkpad_acpi: Lenovo ThinkPad T400, model 2764CTO
uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
thinkpad_acpi: radio switch found; radios are disabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
input: ThinkPad Extra Buttons as /devices/virtual/input/input7
[drm] radeon default to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: power state changed by ACPI to D0
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:01:00.0: setting latency timer to 64
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
[drm] radeon: Initializing kernel modesetting.
[drm:radeon_driver_load_kms] *ERROR* Failed to initialize radeon, disabling IOCTL
radeon 0000:01:00.0: PCI INT A disabled
radeon: probe of 0000:01:00.0 failed with error -22
ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
heci: module is from the staging directory, the quality is unknown, you have been warned.
heci: Intel(R) Management Engine Interface - version 5.0.0.31
heci: Copyright (c) 2003 - 2008 Intel Corporation.
heci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
heci 0000:00:03.0: setting latency timer to 64
heci: link layer has been established.
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4301000-f43017ff] Max Packet=[2048] IR/IT contexts=[4/4]
yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
heci driver initialization successful.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
yenta_cardbus 0000:15:00.0: Socket status: 30000006
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x9fff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4300000 - 0xf7ffffff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf3ffffff
sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
usb 1-6: new high speed USB device using ehci_hcd and address 2
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:7e:6f:cf:41
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: setting latency timer to 64
usb 1-6: configuration #1 chosen from 1 choice
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004)
input: Integrated Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input12
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
Clocksource tsc unstable (delta = -76024863 ns)
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input13
EXT4-fs (sda3): internal journal on sda3:8
EXT4-fs (sda4): barriers enabled
kjournald2 starting: pid 1210, dev sda4:8, commit interval 5 seconds
EXT4-fs (sda4): internal journal on sda4:8
EXT4-fs (sda4): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda4): mounted filesystem with ordered data mode
Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k SS
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a43e1e7]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
gen_RefreshLedState first init
=================> NIC version : C-cut
rtl819xSE 0000:03:00.0: firmware: requesting RTL8192SE/rtl8192sfw.bin
===>rtl8192_SetWirelessMode(), wireless_mode:0x8, support_mode:0x16
<===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
===>ieee80211_start_scan_rsl()
ADDRCONF(NETDEV_UP): wlan0: link is not ready
GPIOChangeRF - HW Radio OFF
=========>NicIFDisableNIC()
PHY_SetRtl8192seRfHalt save BB/RF
Save max pwr
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level CPU
groups: 0-1 (__cpu_power = 2048)
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level CPU
groups: 0-1 (__cpu_power = 2048)
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
================>r8192_wx_set_scan(): hwradio off
================>r8192_wx_set_scan(): hwradio off
================>r8192_wx_set_scan(): hwradio off
eth0: no IPv6 routers present
fuse init (API version 7.12)
================>r8192_wx_set_scan(): hwradio off
================>r8192_wx_set_scan(): hwradio off
GPIOChangeRF - HW Radio ON, RF ON
===========>NicIFEnableNIC()
gen_RefreshLedState first init
=================> NIC version : C-cut
===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
<===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
====================>haha:IPSEnter()
=========>NicIFDisableNIC()
PHY_SetRtl8192seRfHalt save BB/RF
=========>r8192_wx_set_scan(): IPSLeave
===========>NicIFEnableNIC()
gen_RefreshLedState first init
=================> NIC version : C-cut
===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
<===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
====================>haha:IPSEnter()
=========>NicIFDisableNIC()
PHY_SetRtl8192seRfHalt save BB/RF
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
rtl819xSE:==========>rtl8192_down()
===========>NicIFEnableNIC()
gen_RefreshLedState first init
=================> NIC version : C-cut
===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
<===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Save max pwr
rtl819xSE:<==========rtl8192_down()
gen_RefreshLedState first init
=================> NIC version : C-cut
===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
<===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
===>ieee80211_start_scan_rsl()
ADDRCONF(NETDEV_UP): wlan0: link is not ready
Linking with Wireless Network,channel:1, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
===>ieee80211_associate_procedure_wq(), chan:1
==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
=================>ieee80211_authentication_req():auth->algorithm is 0
===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
<===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
Linking with Wireless Network,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
===>ieee80211_associate_procedure_wq(), chan:1
==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
=================>ieee80211_authentication_req():auth->algorithm is 0
===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
<===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
Association response status code 0xc
===>ieee80211_associate_procedure_wq(), chan:1
==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
=================>ieee80211_authentication_req():auth->algorithm is 0
===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
<===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
Association response status code 0xc
===>ieee80211_associate_procedure_wq(), chan:1
==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
=================>ieee80211_authentication_req():auth->algorithm is 0
===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
<===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
Association response status code 0xc
===>ieee80211_associate_procedure_wq(), chan:1
==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
=================>ieee80211_authentication_req():auth->algorithm is 0
===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
<===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
Association response status code 0xc
===>ieee80211_associate_procedure_wq(), chan:1
==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
=================>ieee80211_authentication_req():auth->algorithm is 0
===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
<===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
Association response status code 0xc
===>ieee80211_associate_procedure_wq(), chan:1
==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
=================>ieee80211_authentication_req():auth->algorithm is 0
Linking with Wireless Network,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
Linking with Wireless Network,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
===>ieee80211_associate_procedure_wq(), chan:1
==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
=================>ieee80211_authentication_req():auth->algorithm is 0
===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
<===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
#################ieee80211_sta_send_associnfo(), assocreq_ies_len:65,assocresp_ies_len:53
===>u4bAcParam:a425, ===>u4bAcParam:a449, ===>u4bAcParam:5e431c, ===>u4bAcParam:2f321c,
Associated successfully
============>normal associate
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Using G rates:108
Successfully associated, ht not enabled(0, 0)
===========rtl8192se_update_ratr_table: ff5
===>set to B/G mode
EAPOL TranslateHeader(), pTcb->DataRate = 0x2
EAPOL TranslateHeader(), pTcb->DataRate = 0x2
alg name:TKIP
rtl819xSE:EnableHWSecurityConfig8192:, hwsec:1, pairwise_key:2, SECR_value:c
rtl819xSE:====>to setKey(), dev:ffff880238230000, EntryNo:4, KeyIndex:0, KeyType:2, MacAddr00:1c:10:cf:29:72
rtl819xSE:=========>after set key, usconfig:8008
alg name:TKIP
rtl819xSE:====>to setKey(), dev:ffff880238230000, EntryNo:1, KeyIndex:1, KeyType:2, MacAddrff:ff:ff:ff:ff:ff
rtl819xSE:=========>after set key, usconfig:8009
===>DHCP Protocol start tx DHCP pkt src port:68, dest port:67!!
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
========>dm_check_edca_turbo():iot peer is unknown, bssid:00:1c:10:cf:29:72
wlan0: no IPv6 routers present
eth0: no IPv6 routers present
e1000e: eth0 NIC Link is Down
DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:03:00.0
eth0 Link encap:Ethernet HWaddr 00:24:7E:6F:CF:41
inet6 addr: fe80::224:7eff:fe6f:cf41/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:240 (240.0 b) TX bytes:936 (936.0 b)
Memory:fc200000-fc220000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2160 (2.1 Kb) TX bytes:2160 (2.1 Kb)
wlan0 Link encap:Ethernet HWaddr 00:26:5E:EA:64:78
inet addr:192.168.1.104 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::226:5eff:feea:6478/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17 Memory:ffffc90000068000-ffffc90000068100
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3400 Series
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10)
15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff)
15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11)
This line:
DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:03:00.0
I get a whole bunch of times after it first appears in dmesg. I've googled this error without the address on the end and it seems there isn't much of a solution that I'm aware of. I don't know what to do from here! Guidance is so very appreciated.Same here, I've tried without wicd. The problem reproduces exactly the same.
Also, I've googled around and it seems like this is a recurring bug.
I tried passing iommu=force to the kernal during boot and from there, the card works slowly. I also get a different error array in DMESG from there. The end of it is as follows:
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
Command line: root=/dev/disk/by-uuid/b86db434-e877-45bf-bc56-65187c632662 ro vga=791 iommu=force
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable)
BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
BIOS-e820: 00000000bf8a7000 - 00000000bf9b7000 (usable)
BIOS-e820: 00000000bf9b7000 - 00000000bfa0f000 (reserved)
BIOS-e820: 00000000bfa0f000 - 00000000bfac6000 (usable)
BIOS-e820: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
BIOS-e820: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
BIOS-e820: 00000000bfad4000 - 00000000bfad8000 (reserved)
BIOS-e820: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
BIOS-e820: 00000000bfadc000 - 00000000bfadf000 (reserved)
BIOS-e820: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
BIOS-e820: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
BIOS-e820: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
BIOS-e820: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000023c000000 (usable)
DMI present.
last_pfn = 0x23c000 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DBFFF uncachable
DC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 23C000000 mask FFC000000 uncachable
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask FC0000000 write-back
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbfe00 max_arch_pfn = 0x100000000
e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (usable)
modified: 0000000000001000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009ec00 (usable)
modified: 000000000009ec00 - 00000000000a0000 (reserved)
modified: 00000000000dc000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bf8a1000 (usable)
modified: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
modified: 00000000bf8a7000 - 00000000bf9b7000 (usable)
modified: 00000000bf9b7000 - 00000000bfa0f000 (reserved)
modified: 00000000bfa0f000 - 00000000bfac6000 (usable)
modified: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
modified: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
modified: 00000000bfad4000 - 00000000bfad8000 (reserved)
modified: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
modified: 00000000bfadc000 - 00000000bfadf000 (reserved)
modified: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
modified: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
modified: 00000000bfb08000 - 00000000bfd0f000 (reserved)
modified: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
modified: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
modified: 00000000bfdff000 - 00000000bfe00000 (usable)
modified: 00000000bfe00000 - 00000000c0000000 (reserved)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fed00000 - 00000000fed00400 (reserved)
modified: 00000000fed10000 - 00000000fed14000 (reserved)
modified: 00000000fed18000 - 00000000fed1a000 (reserved)
modified: 00000000fed1c000 - 00000000fed90000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ff800000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 000000023c000000 (usable)
init_memory_mapping: 0000000000000000-00000000bfe00000
0000000000 - 00bfe00000 page 2M
kernel direct mapping tables up to bfe00000 @ 8000-c000
init_memory_mapping: 0000000100000000-000000023c000000
0100000000 - 023c000000 page 2M
kernel direct mapping tables up to 23c000000 @ a000-14000
RAMDISK: 37f4a000 - 37fef0b7
ACPI: RSDP 00000000000f64e0 00024 (v02 LENOVO)
ACPI: XSDT 00000000bfd6a273 0009C (v01 LENOVO TP-7U 00002160 LTP 00000000)
ACPI: FACP 00000000bfd6a400 000F4 (v03 LENOVO TP-7U 00002160 LNVO 00000001)
ACPI: DSDT 00000000bfd6a7db 0F3FB (v01 LENOVO TP-7U 00002160 MSFT 03000000)
ACPI: FACS 00000000bfd8e000 00040
ACPI: SSDT 00000000bfd6a5b4 00227 (v01 LENOVO TP-7U 00002160 MSFT 03000000)
ACPI: ECDT 00000000bfd79bd6 00052 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
ACPI: APIC 00000000bfd79c28 00078 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
ACPI: MCFG 00000000bfd79ca0 0003C (v01 LENOVO TP-7U 00002160 LNVO 00000001)
ACPI: HPET 00000000bfd79cdc 00038 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
ACPI: SLIC 00000000bfd79dc2 00176 (v01 LENOVO TP-7U 00002160 LTP 00000000)
ACPI: BOOT 00000000bfd79f38 00028 (v01 LENOVO TP-7U 00002160 LTP 00000001)
ACPI: ASF! 00000000bfd79f60 000A0 (v16 LENOVO TP-7U 00002160 PTL 00000001)
ACPI: SSDT 00000000bfd8d213 0054F (v01 LENOVO TP-7U 00002160 INTL 20050513)
ACPI: TCPA 00000000bfb07000 00032 (v00 00000000 00000000)
ACPI: DMAR 00000000bfb06000 000D8 (v01 00000001 00000000)
ACPI: SSDT 00000000bfad3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: SSDT 00000000bfad2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 00000000bfad1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
(8 early reservations) ==> bootmem [0000000000 - 023c000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 000082d0d0] TEXT DATA BSS ==> [0000200000 - 000082d0d0]
#3 [0037f4a000 - 0037fef0b7] RAMDISK ==> [0037f4a000 - 0037fef0b7]
#4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
#5 [000082e000 - 000082e14c] BRK ==> [000082e000 - 000082e14c]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000f000] PGTABLE ==> [000000a000 - 000000f000]
found SMP MP-table at [ffff8800000f6520] f6520
[ffffe20000000000-ffffe20007dfffff] PMD -> [ffff880028200000-ffff88002fffffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0023c000
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000000 -> 0x00000001
0: 0x00000006 -> 0x0000009e
0: 0x00000100 -> 0x000bf8a1
0: 0x000bf8a7 -> 0x000bf9b7
0: 0x000bfa0f -> 0x000bfac6
0: 0x000bfdff -> 0x000bfe00
0: 0x00100000 -> 0x0023c000
On node 0 totalpages: 2079234
DMA zone: 56 pages used for memmap
DMA zone: 1688 pages reserved
DMA zone: 2249 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 766625 pages, LIFO batch:31
Normal zone: 17696 pages used for memmap
Normal zone: 1276640 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000001000 - 0000000000006000
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000
PM: Registered nosave memory: 00000000bf9b7000 - 00000000bfa0f000
PM: Registered nosave memory: 00000000bfac6000 - 00000000bfad1000
PM: Registered nosave memory: 00000000bfad1000 - 00000000bfad4000
PM: Registered nosave memory: 00000000bfad4000 - 00000000bfad8000
PM: Registered nosave memory: 00000000bfad8000 - 00000000bfadc000
PM: Registered nosave memory: 00000000bfadc000 - 00000000bfadf000
PM: Registered nosave memory: 00000000bfadf000 - 00000000bfb06000
PM: Registered nosave memory: 00000000bfb06000 - 00000000bfb08000
PM: Registered nosave memory: 00000000bfb08000 - 00000000bfd0f000
PM: Registered nosave memory: 00000000bfd0f000 - 00000000bfd9f000
PM: Registered nosave memory: 00000000bfd9f000 - 00000000bfdff000
PM: Registered nosave memory: 00000000bfe00000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 25 pages at ffff880028035000, static data 72352 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2045514
Kernel command line: root=/dev/disk/by-uuid/b86db434-e877-45bf-bc56-65187c632662 ro vga=791 iommu=force
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
NR_IRQS:768
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2526.745 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 8100960k/9371648k available (3409k kernel code, 1054712k absent, 214984k reserved, 1239k data, 464k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.05 BogoMIPS (lpj=8422483)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5056.56 BogoMIPS (lpj=8423300)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (10111.61 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
net_namespace: 1888 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e3ffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: Power Resource [PUBS] (on)
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: reg 10 64bit mmio: [0xfc226800-0xfc22680f]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:19.0: reg 10 32bit mmio: [0xfc200000-0xfc21ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xfc225000-0xfc225fff]
pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc226c00-0xfc226fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc220000-0xfc223fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df]
pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc227000-0xfc2273ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x1c40-0x1c47]
pci 0000:00:1f.2: reg 14 io port: [0x1834-0x1837]
pci 0000:00:1f.2: reg 18 io port: [0x1838-0x183f]
pci 0000:00:1f.2: reg 1c io port: [0x1830-0x1833]
pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc226000-0xfc2267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfc227400-0xfc2274ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xcfff0000-0xcfffffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xcff00000-0xcfffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:03:00.0: reg 10 io port: [0x3000-0x30ff]
pci 0000:03:00.0: reg 14 32bit mmio: [0xf4200000-0xf4203fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xf4200000-0xf42fffff]
pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf40fffff]
pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf4100000-0xf41fffff]
pci 0000:15:00.0: reg 10 32bit mmio: [0xf4300000-0xf4300fff]
pci 0000:15:00.0: supports D1 D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.0: PME# disabled
pci 0000:15:00.1: reg 10 32bit mmio: [0xf4301000-0xf43017ff]
pci 0000:15:00.1: supports D1 D2
pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.1: PME# disabled
pci 0000:15:00.2: reg 10 32bit mmio: [0xf4301800-0xf43018ff]
pci 0000:15:00.2: supports D1 D2
pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.2: PME# disabled
pci 0000:15:00.3: reg 10 32bit mmio: [0xf4301c00-0xf4301cff]
pci 0000:15:00.3: supports D1 D2
pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.3: PME# disabled
pci 0000:15:00.4: reg 10 32bit mmio: [0xf4302000-0xf43020ff]
pci 0000:15:00.4: supports D1 D2
pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.4: PME# disabled
pci 0000:15:00.5: reg 10 32bit mmio: [0xf4302400-0xf43024ff]
pci 0000:15:00.5: supports D1 D2
pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.5: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x6000-0x9fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xf4300000-0xf7ffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf0000000-0xf3ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff has been reserved
system 00:00: iomem range 0xc4000-0xc7fff has been reserved
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xcc000-0xcffff has been reserved
system 00:00: iomem range 0xd0000-0xd3fff has been reserved
system 00:00: iomem range 0xdc000-0xdffff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11ff has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x167f has been reserved
system 00:02: ioport range 0x1680-0x169f has been reserved
system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x2000-0x2fff
pci 0000:00:01.0: MEM window: 0xcff00000-0xcfffffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: 0x3000-0x3fff
pci 0000:00:1c.1: MEM window: 0xf4200000-0xf42fffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.3: IO window: 0x4000-0x4fff
pci 0000:00:1c.3: MEM window: 0xf8000000-0xf9ffffff
pci 0000:00:1c.3: PREFETCH window: 0x000000f4000000-0x000000f40fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
pci 0000:00:1c.4: IO window: 0x5000-0x5fff
pci 0000:00:1c.4: MEM window: 0xfa000000-0xfbffffff
pci 0000:00:1c.4: PREFETCH window: 0x000000f4100000-0x000000f41fffff
pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
pci 0000:15:00.0: IO window: 0x006000-0x0060ff
pci 0000:15:00.0: IO window: 0x006400-0x0064ff
pci 0000:15:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
pci 0000:15:00.0: MEM window: 0xc4000000-0xc7ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
pci 0000:00:1e.0: IO window: 0x6000-0x9fff
pci 0000:00:1e.0: MEM window: 0xf4300000-0xf7ffffff
pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f3ffffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xcff00000-0xcfffffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:03: resource 1 mem: [0xf4200000-0xf42fffff]
pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:05: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:05: resource 2 pref mem [0xf4000000-0xf40fffff]
pci_bus 0000:0d: resource 0 io: [0x5000-0x5fff]
pci_bus 0000:0d: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:0d: resource 2 pref mem [0xf4100000-0xf41fffff]
pci_bus 0000:15: resource 0 io: [0x6000-0x9fff]
pci_bus 0000:15: resource 1 mem: [0xf4300000-0xf7ffffff]
pci_bus 0000:15: resource 2 pref mem [0xf0000000-0xf3ffffff]
pci_bus 0000:15: resource 3 io: [0x00-0xffff]
pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:16: resource 0 io: [0x6000-0x60ff]
pci_bus 0000:16: resource 1 io: [0x6400-0x64ff]
pci_bus 0000:16: resource 2 pref mem [0xf0000000-0xf3ffffff]
pci_bus 0000:16: resource 3 mem: [0xc4000000-0xc7ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 660k freed
Simple Boot Flag at 0x35 set to 0x1
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1257365076.373:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15825
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20004100000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 464k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
SCSI subsystem initialized
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 29
ata3: DUMMY
ata4: DUMMY
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ATA-7: SAMSUNG MMCQE28G8MUP-0VA, VAM08L1Q, max UDMA/100
ata1.00: 250069680 sectors, multi 16: LBA48
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/100
ata1.00: configured for UDMA/100
ata1: EH complete
scsi 0:0:0:0: Direct-Access ATA SAMSUNG MMCQE28G VAM0 PQ: 0 ANSI: 5
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:79:00:00:00:a0 succeeded
ata2.00: ACPI cmd e3/00:01:00:00:00:a0 succeeded
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX12, max UDMA/133
ata2.00: ACPI cmd e3/00:79:00:00:00:a0 succeeded
ata2.00: ACPI cmd e3/00:01:00:00:00:a0 succeeded
ata2.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX12 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 250069680 512-byte hardware sectors: (128 GB/119 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs: barriers enabled
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda6 with ordered data mode
kjournald2 starting: pid 601, dev sda6:8, commit interval 5 seconds
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
udev: starting version 141
heci: module is from the staging directory, the quality is unknown, you have been warned.
heci: Intel(R) Management Engine Interface - version 5.0.0.31
heci: Copyright (c) 2003 - 2008 Intel Corporation.
heci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
heci 0000:00:03.0: setting latency timer to 64
heci: link layer has been established.
ACPI: SSDT 00000000bfad6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 00000000bfad4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
ACPI: AC Adapter [AC] (off-line)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: SSDT 00000000bfad5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: SSDT 00000000bfad5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
e1000e: Copyright (c) 1999-2008 Intel Corporation.
input: PC Speaker as /devices/platform/pcspkr/input/input5
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: WMI: Mapper loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
heci driver initialization successful.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:7e:6f:cf:41
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff
ACPI: Battery Slot [BAT0] (battery present)
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'TKIP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'WEP'
Linux kernel driver for RTL8192 based WLAN cards
Copyright (c) 2007-2008, Realsil Wlan
rtl819xSE 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
rtl819xSE 0000:03:00.0: setting latency timer to 64
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (46 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (50 C)
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
===============>NIC 8192SE
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: setting latency timer to 64
acpi device:0a: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/device:09/input/input6
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
Monitor-Mwait will be used to enter C-3 state
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11)
ricoh-mmc: Controller is now disabled.
Dot11d_Init()
IRQ 17<6>Non-volatile memory driver v1.3
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
thinkpad_acpi: ThinkPad ACPI Extras v0.23
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7UET66WW (2.16 ), EC 7VHT12WW-1.01
thinkpad_acpi: Lenovo ThinkPad T400, model 2764CTO
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
input: ThinkPad Extra Buttons as /devices/virtual/input/input7
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input8
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input9
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input10
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input11
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
yenta_cardbus 0000:15:00.0: Socket status: 30000006
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x9fff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4300000 - 0xf7ffffff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf3ffffff
ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4301000-f43017ff] Max Packet=[2048] IR/IT contexts=[4/4]
sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 1-6: new high speed USB device using ehci_hcd and address 3
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input12
Clocksource tsc unstable (delta = -250245903 ns)
usb 1-6: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004)
input: Integrated Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input13
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
EXT4 FS on sda6, internal journal on sda6:8
EXT4-fs: barriers enabled
kjournald2 starting: pid 1750, dev sda2:8, commit interval 5 seconds
EXT4 FS on sda2, internal journal on sda2:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda2 with ordered data mode
EXT4-fs: barriers enabled
kjournald2 starting: pid 1751, dev sda7:8, commit interval 5 seconds
EXT4 FS on sda7, internal journal on sda7:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda7 with ordered data mode
Adding 498920k swap on /dev/sda5. Priority:-1 extents:1 across:498920k SS
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a43e1e7]
scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
sd 4:0:0:0: [sdb] 15753216 512-byte hardware sectors: (8.06 GB/7.51 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
gen_RefreshLedState first init
=================> NIC version : C-cut
rtl819xSE 0000:03:00.0: firmware: requesting RTL8192SE/rtl8192sfw.bin
===>rtl8192_SetWirelessMode(), wireless_mode:0x8, support_mode:0x16
<===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
===>ieee80211_start_scan_rsl()
====================>haha:IPSEnter()
=========>NicIFDisableNIC()
PHY_SetRtl8192seRfHalt save BB/RF
===========>NicIFEnableNIC()
gen_RefreshLedState first init
=================> NIC version : C-cut
===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
<===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Linking with Scytale,channel:6, qos:1, myHT:1, networkHT:0, mode:4 cur_net.flags:0x40a
===>ieee80211_associate_procedure_wq(), chan:6
==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
=================>ieee80211_authentication_req():auth->algorithm is 0
===>rtl8192_SetWirelessMode(), wireless_mode:0x4, support_mode:0x16
<===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
#################ieee80211_sta_send_associnfo(), assocreq_ies_len:81,assocresp_ies_len:105
===>u4bAcParam:a425, ===>u4bAcParam:a449, ===>u4bAcParam:5e431c, ===>u4bAcParam:2f321c, <6>Associated successfully
============>normal associate
Using G rates:108
Successfully associated, ht not enabled(0, 0)
===========rtl8192se_update_ratr_table: ff5
===>set to B/G mode
========>dm_check_edca_turbo():iot peer is unknown, bssid:00:1c:0e:41:2b:e1
===>DHCP Protocol start tx DHCP pkt src port:68, dest port:67!!
LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
wlan0: no IPv6 routers present
rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again
LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
When I pass iommu=off, it slows to unusable but does not cause a kernel panic.
Last edited by sharpie (2009-11-05 03:32:39) -
Gif fail after download using php
I create a web page in php. after download a file using php:
header('Content-Type: application/octet-stream');
header('Content-Disposition: attachment; filename="sth.txt"');
readfile("sth.txt");
the gif animation dosn't work. in IE9 every thing is ok.
please help me.Thanks for your reply.
My web page is offline, in my pc using EasyPHP.
I tried other mime types like text/plain too.
Let me explain my question more:
There is sth similar to Yahoo Mail. My page has a link, like '''Files(2)''', it means two new files is available for download.
After user clicks it, he see the links to download the files. before download there must be a MySQL query to decrease the number of new files (1), then download the file. I implement this using AJAX. first time every thing is ok, but for second time, after user clicks the link to download, the AJAX gif is not working (image loads without animation). Also for testing, I placed a gif in my page to show all the time (not for AJAX). after the first download, the animaion is stop and show a still image.
By the way, my page do net refreash after click and download.
Of course, i solved my problem by using window.open() instead of window.location.href for redirect to download page.
Thanks for help. -
Has anyone EVER successfully used BlackBerry Bold BlueTooth DUN w/ iBook ?
Greetings all,
I have spent days trying to get my iBook G4 running OS 10.4.11 to successfully connect to the internet via BlueTooth through my BB Bold's supposed dial-up networking capabilities. I have followed endless threads in multiple Mac, Black, Crack, and other forums and have watched countless video demonstrations. None of the info I have found has worked, probably because every source of info involved either a different BlackBerry model, a different Mac model, or a different OS version.
I get the same Internet Connect error every time: "A modem error occurred. Please check your settings and try again."
I have tried multiple dial-up isp's and multiple access numbers. I do not claim to be an expert, but I have worked as a network administrator, have set up multiple network devices, and have a pretty good understanding of internet and general network technologies and this is just driving me insane.
If anyone actually knows how to accomplish this task, I would be eternally grateful for step-by-step instructions or even just some insight into how I might determine what type of "modem error" occurred!
Please do not tell me to purchase an iPhone or a tethering plan. If those were viable options at the moment, I would not be wasting our time here. Thanks!Ditto on both points. Meanwhile I use the solution of a third party backup.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
802.1x Authentication has Failed after snow leopard upgrade
Hello Apple Community,
I have a mid 2009 MacBook 4 GB of RAM on INTEL CORE DUO 2.
I upgraded my OS X to 10.6 from 10.5.8 and after completing the upgrade I have not been able to use my Airport. Can anyone help me get this problem fix?
Paulwhat is it saying? is there an error?
Maybe take a look at
http://www.esecurityplanet.com/views/article.php/3899996/How-to-Use-Enterprise-W iFi-Encryption-and-8021X-in-Mac-OS-X.htm -
Win XP installation fails after successful Parallels installation...
Hi:
I've been trying for the last several hours to install my new copy of Windows XP under Parallels (which bought, installed, and updated to Build 3188 earlier).
Here's what happens: I get to the final step of the "OS Installation Assistant" in Parallels, where it says to insert the Windows XP CD into the CD-ROM drive. I do so, click "Finish," and after a few moments, my Macbook's SuperDrive spits out the Windows CD (yeah, I know... ).
That's it.
Oh, the one time I got the Windows installation process underway, the installation quit, giving me the following error message: "File symc8xx.sys is corrupted. Press any key to continue." This was followed by "Setup failed. Press any key to restart your computer."
*ANY* help you good folks can offer will be greatly appreciated.
Bill in CTSince Parallels is not an Apple product, you have better luck posting your question on the Parallels discussion forums rather than an Apple forum that focuses on compatibility issues between Macs and Windows:
http://forums.parallels.com -
Has anybody here successfully used a zen micro with mac
I called customer service and received a noncommittal "we'll take it back if it doesn't work". I am a mac user (I do graphics and have been using Apple computers for years) but I really don't want an ipod. Please tell me if anybody has tried it!
I'm guessing it won't work as it uses specific drivers.
You could try using a program that others have used with the Zen, which is written by a very kind guy for free. If it doesn't work maybe he'll add support for the Micro also http://www.wentnet.com/projects/xnjb/index.html
Maybe you are looking for
-
Attach external documents to SAP
Hi we are planning to attach external documents to purchase order in ME22N screen. & every month 10gb files I would like to know the below points do we have any limitation for attachment? what potential risks are involved using this functionality? Wi
-
I have something wrong with my production Instance... The Database server CPU goes up to 70%. I executed some performance queries and I get the following .. BUFFER_GETS SQL_TEXT 74434 SELECT count(*) FROM ............... 74166 SELECT PAYROLL,........
-
Is it possible to pass a auto credit entry in miro
Is it possible to pass a auto credit entry in a seperate gl while doing miro equal to a debit entry done in another gl in same MIro only expense 100 (from migo) to suspense gl 100 (auto entry)
-
Oracle JDBC Driver too old in Oracle WebLogic Server 10.3
I check oracle jdbc driver bundles in the Oracle WebLogic Server 10.3 The version is too old,and current version is: Oracle Database 11g Release 1 (11.1.0.7.0) JDBC Drivers The question is: Could we replace the old ojdbc6.jar with the current one (11
-
Hey, I have a macbook aluminum and I have it on my desk but not the macbook itself. I have the macbook on a towel cloth sort a thing on the desk. Will that affect the macbook at all such as heat or anything?