Isyncing treo680, entries in palm end up in palmdesktop not in ical, etc

As opposed to the other isyncing problems here, i have no messages saying isync failed. however, entries i make into the palm do not end up in ical or address book but end up in the palm desktop; entries into address book in mac fail to make it into contact list with palm BUT entries into ical end up in my palm calendar. i have disabled the conduits requested by isync. i have updated the palm desktop and hotsync manager programs. is there anything else i should be doing aside from resetting (havent done that yet)thanks

Hello
It's a clean install, and fully updated to latest software update etc.
Right now I have no need for iChat server or Notification server. I suspect we'll never need iChat, but maybe oneday notifications might be helpful (if we get any iPhones I guess).
How do I turn these things off 'properly' - I've done all I think I can using the Server Administrator interface.
Thanks in advance for any / all guidance.
Gavin

Similar Messages

Duplicate calendar entries with Palm/isync

I was able to sync my Palm Tungsten E2 once with entourage, ical, and address book. I was able to enter events in the calendar (through entourage) and enter them in the palm, and it synced perfectly. I went to do it again, and now I have duplicate events in ical and entourage and palm (about 4). The palm appears in the isync and I've enabled the palm os sync, and when checking the hot sync manager, I select the icon, but it never applies. I spoke with palm and they said they didn't have the software updated for this version of macbook.
My question is, if it worked once, why not all the time?
And is there a way remove the duplicate events without manually deleting them?
MacBook 10.5.5
Tungsten Palm E2, conduit manager 3.2.1, isync 3.0.2, Palm 4.2.1

I haven't the time to answer this in depth at the moment, but you can do three things immediately:
• stop synchronizing and, if necessary, remove your device from iSync temporarily
• back up the contact, event and task data stored in the Address Book and iCal
• remove the duplicates* from your Palm OS databases
*The tool best suited for dealing with duplicate records on a Palm device is UnDupe, from Stevens Creek Software.
There a couple of fundamental issues in play here, and I will explain them later. It is particularly because you have chosen Entourage and intend to keep using it that dealing with this issue is more complex than it otherwise would be.

Isync no longer sees Palm TX

I had isync working with our Palm TX, as well as syncing with Palm's own desktop etc, when we were using the usb cable. Now, I have the Palm syncing successfully via bluetooth but only to the Palm desktop (when I choose sync from the palm the desktop manager opens on the mac and syncing takes place but I no longer see the iCal conduit launching). If I launch iSync itself the Palm symbol is no longer shown, and if I choose to connect to device it doesn't find anything. Strangely enough if I connect via cable again iSync still doesn't find the Palm. There must be something I'm overlooking.
It will allow me to install the means to sync to Palm OS but it says that some of the existing conduits have to be disabled in order to do so.
Message was edited by: Simon (UK)

Found the answer on the apple/palm knowledge base

OSX10.4.9/iSync 2.4 with Palm E2 running HotSync 3.2.1

Hi All,
iSync happily syncs between my Powerbook and phone;
HotSync happily syncs between Powerbook and my Palm...
but I can't get iSync to install the iSync Conduit in HotSync Manager enabling the Palm to download to iCal etc.
I've run 'Enable Palm OS Syncing' from within iSync a number of times. It seems to function OK (moves appropriate conduits within Library>Palm HotSync to a new folder called iSync Disabled Conduits for instance), but when I launch HotSync>Conduit Settings, the expected iSync HotSync Conduit isn't there! Back in Library>Palm HotSync>Conduits, there is newly installed file called Apple though it doesn't appear anywhere in HotSync Manager.
Also, the Palm E2 doesn't appear in iSync when I 'add device>scan' - I believe this is normal and it won't appear until the iSync HotSync Conduit finally appears in HotSync - is this correct?
I have previously had no problems with older iterations of iSync although I haven't used iSync1.? for a year or more - could something be left over that should have been deleted? I have done clean installs of OSX10.4.9 and the Palm OS 4.2.1 fairly recently.

Welcome to Apple Discussions.
There is some confusion regarding this, largely the fault of Apple. There are three names for the iSync Palm Conduit:
• iSync Palm Conduit [the name that most documentation refers to]
• iSync Conduit [the name which it appears as in the HotSync Manager]
• Apple [name of the conduit as shown in the Finder]
If the file Apple resides in your active Conduits folder but does not appear when you attempt to configure conduits using the HotSync Manager or the HotSync menu item in the Palm Desktop, it's likely a damaged file. It should appear in those dialogs as the iSync Conduit.
If you cannot get it to appear, send a message to the electronic mail address listen in my Public Profile and I will reply with a copy you can use in its place.
The iSync Add Device… option is not applicable to Palm devices. You can only get it to appear by using the Enable Palm OS Syncing… option that you've been attempting to do.

I updated my iPhone 4 to iOS5 and let it sync with my Macbook and now all my iPhone iCal entries are gone. How can I get my iCal events back on my iPhone?

I updated my iPhone 4 to iOS5 and let it sync with my Macbook (running Lion) and now all my iPhone iCal entries are gone. How can I get my iCal events back on my iPhone?

Me too! Help anyone?

I just installed Yosemite. Notifications Center will not show ICal entries that were on my ICal at time of installation. How do I get events to show in Notification Center?

I just installed Yosemite. Notifications Center will not show ICal entries that were on my ICal at time of installation. How do I get events to show in Notification Center?

Submit your feedback requesting this feature directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback

Account determined for entry (chart of accounts no) WRX 0003 not possible

HI, I'm trying to GR a PO for a material using movement type 101 and am getting the following error
"Account determined for entry (chart of accounts no) WRX 0003 not possible"
I know that I need to go to OBYC to make an entry for transaction WRX for valuation group code 0003 and valuation class and then assign it to the relevant gl.
My problem is I don't know what the valuation class should be. In the PO there is short text entered for the item rather than a material number so I cannot go to the material master to check what valuation class is assigned. Is it linked anywhere to the material group?
Thanks in advance for your help

yes u can do
fist
u can make the entry and blank valuation class and give the gl account in wrx
so that it will take this GL account for blank materia number
or
u cna give valuation class to material group
MM purchasing -- materal master -- Entry Aids for Items Without a Material Master
hope this helps

HT1212 I have no idea why suddenly my iPhone5 will not move past the Password screen; also, a voice describes each button I touch, and ends with "screen locked" (not "phone locked").

I have no idea why my iPhone5 suddenly will not move past the PW screen; a "voice" identifies each button touched (the Slide button, for example) or the PW buttons, and then ends with "screen locked" (not phone locked).

I believe you have Voice Over on:
You have to tap, then double-tap to select the numbers to enter your passcode.
Then:
Press Home.
Tap Settings. Then double-tap Settings.
Tap General. Then double-tap General.
Use three fingers on the screen to scroll to Accessibility.
Tap Accessibility. Then double-tap Accessibility.
Tap VoiceOver. Then double-tap VoiceOver.
Tap "On" next to VoiceOver. Then double-tap "On" to turn it off.

When trying to start firefox a message comes up " the procedure entry point IS Thread Desktop composited could not be located in the dynamic link library user32.dll" I then tell it okay as this is the only button it has abd it then takes me into the Add-o

When trying to start firefox a message comes up " the procedure entry point IS Thread Desktop composited could not be located in the dynamic link library user32.dll" I then tell it okay as this is the only button it has abd it then takes me into the Add-on window and freezes up and I then have to reboot and avoid using firefox
== This happened ==
Every time Firefox opened
== After trying to install Firefox upgrade and IE8 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.125 Safari/533.4

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Scratchy noise coming from top end of keyboard. Not effecting performance but very noisy and worrying! What is it? Is my computer seriously damaged? Is it easily fixed? Thanks for any help

Scratchy noise coming from top end of keyboard. Not effecting performance but very noisy and worrying! What is it? Is my computer seriously damaged? Is it easily fixed? Thanks for any help

It would be helpful if you were to identify the model of MBP you have.
The noise makers on a MBP are the fan(s), the HDD and the optical drive. Can you locate the exact position where the noise is coming from?
Ciao.

The SYSVAL table entry for the database version (16) does not match the required version

We upgraded from Tidal Enterprise Scheduler (TES) 5.31 to 6.1 on fresh Windows x64 2008 R2 servers. I did a fresh install but our DBA restored a copy of our database from pre-prod which was at 5.31. I get the error below. Note, SQL went from 2005 to 2012 during this upgrade. Do I need to change a value in this table to reflect the SQL change?
[04/29 12:47:14:198]:TIDAL Enterprise Scheduler: version 6.1.0.133
[04/29 12:47:14:198]:Java version: 1.8.0
[04/29 12:47:14:198]:Java Virtual Machine version: 25.0-b70
[04/29 12:47:14:198]:Start Time : 04/29/14 12:47:14:198
[04/29 12:47:14:198]:----------------------------------------------------------------------------
[04/29 12:47:14:198]:Database URL :jdbc:sqlserver://SQL2012-Host:1433;responseBuffering=adaptive
[04/29 12:47:14:198]:Database Driver :com.microsoft.sqlserver.jdbc.SQLServerDriver
[04/29 12:47:14:198]:Maximum number of log files = 100
[04/29 12:47:14:198]:Added a LogFile called 'RegularFile'
[04/29 12:47:14:198]:LogManager: setting default log
[04/29 12:47:14:214]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:14:495]:MessageBroker: Instantiated TcpTransportServer (URI = tcp://0.0.0.0:6215)
[04/29 12:47:16:975]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:17:272]:The SYSVAL table entry for the database version (16) does not match the required version (23). Shutting down.
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:Shutting down the application

I had this error last night while applying a patch to 6.0. However in my case the version was 21 versus a required version of 23.
As far as i know 6.1 is not compatible with the 5 db schema, so you will need an update / migration plan for the db also.

Hi.. i've got problem with my iPhone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold power and home button even reset the network setting but ended with i am not able even to turn the wifi on. does any body can help me out???

hi..
i've got problem with my iphone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold the power and home button even reset the network setting but ended with i am not even can turn the wifi on. does any body can helpme?

See this: http://support.apple.com/kb/TS1559
If you carefully follow all of the instructions in this tip and none of them restore WiFi then your radio chip has failed and you need to get the phone replaced by Apple.

Procedure ending point Sqlite3_wal_checkpoint could not be located in library SQLite3.dll

procedure ending point Sqlite3_wal_checkpoint could not be located in library SQLite3.dll

Copy file "SQLite3.dll" from this location using Windows Explorer:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
Paste this file to this location
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
Restart your computer, the message should disappear..

Error message The procedure entry point ?GetIsWrapLocationValid@@YAFPBVIStandOffData@@@Z could not b

The procedure entry point
?GetIsWrapLocationValid@@YAFPBVIStandOffData@@@Z could not be found in the dynamic link library Public.dll
I get this message when trying to launch InDesign CS3. It's been working fine until today.

http://kb2.adobe.com/cps/829/cpsid_82947.html
Bob

Running windows 7 64 I get this error from downloader.exe The procedure entry point ?GetRegisterInfo@@GXPADHOH@Z could not be located in the dynamic link library transport_dll.dll

I keep getting this message from downloader.exe running Windows 7 64 bit O/S each time I start Firefox 3.6.9. The procedure entry point ?GetRegisterInfo@@GXPADHOH@Z could not be located in the dynamic link library transport_dll.dll. I have uninstalled Firefox and reinstalled it on a number of occasions but this message box persists. I can still use Firefox by just clicking the message away but it is an annoyance when starting the program. Thank you for any info you can provide me on this.

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. If that doesn't help read on...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Isyncing treo680, entries in palm end up in palmdesktop not in ical, etc

Similar Messages

Maybe you are looking for