IT 0041-Date Specifications Quick / Fast entry

Hi Friends,
Is there a quick way of creating IT0041 for existing employees (Not through Actions)
How about Fast Entries?? - How to maintain for IT 0041-Date Specifications, through fast entries?
Please advice, it's bit urgent...
Regards,
TG

Hi ,
I dont have any document regarding this , although i can guide you writing step by step
Run the transaction scat.
After that it ask you transaction code to reocord.
After that do the same procedure you use for recording then
After recording jsut click on end on processing or F12.
Component you have to mention what ever is yours you can give here something py-au.
double click on SE11
and again double click on SAP....
now it again shows all screen what u recorded here you have to reocrd which field you require now do the step by step press F6 which field required .
Goto export all the fields.
Choose save .
Parameter F7 .
Remove the default fields.
save run
Hope your problem solved.
Manoj Shakya.
Techno-Fuctional Consultant
SAP-HR
******(Useful answers should be rewarded)

Similar Messages

DAte not available in infotype 0041(date specification)

Hai All,
In our place we are using 4 type of "date type"
Z1 Hired date.
Z2 Seperation Date
Z3 Leave quota start
Z4 Service entry date
for all employees date specification maintain by dynamic action.
for some employees date specification is not maintain by the system.they are having only Z1 Hiring date only. others not available.
how can i rectify this problem?
Kind regards.
Dinesh.

Hi
You have to check your Dynamic action.
While querying dynamic ation how did you quaried, on which grouping you quried ?
The employee who dont get the details are members in that group are not?
if you give it in feature you must have all 4 dates to all the employees, otherwise you will be in trobuble
becuase SAP wont allow you fill the type only without date in infotype 0041
Regards
Adi

IT 0041 Date Specifications - Can we add more fields?

Currently, one can only have up to 12 date types / dates in IT 0041. We are tracking subsitute start date assignments for each substitute teacher - which can result in multiple entries of this customer date type we created. I saw on SAP help that the screen can be modified. Can one just go to MP004100 in the infotype screen control and copy entries to add more fields to enter these date specifications?

Hi,
To meet your requirements you need to enhance infotype with help of an abaper. The steps are
Go to Transaction PM01.
Enter the Infotype number which you want to edit
select single screen tab
Select Customer Include ra
Select the u2018PS Structure Infotypeu2019.
Create a PS structure CI_INCLUDE and create your fields
Save and Activate the PS structure
Go back to the initial screen of PM01.
Hope this will be of help
Regards,
guds

HR-ABAP-regarding infotype 0041-dates specifications

Hi All,
Can any body help in this problem that.
I am retrieving one particular date from infotype 0041 by passing the date type U9.
I want to know from which dardt(date type field in PA0041) i.e., dar01 or dar02 or dar03- - - - dar12, the date is coming .
Pls let me know urgently this.
Andvance thanks for all of your efforts.
Thanks&Regards,
Jeevakala.

Hello,
The option i have implememted for a similar scenario is as follows
data: v_darxx like p0041-dar01,
v_datxx like p0041-dat01.
select single * from pa0041 into int_pa0041 after passing key fields
do 12 times
varying v_darxx from i_it41-dar01 next i_it41-dar02
varying v_datxx from i_it41-dat01 next i_it41-dat02.
if v_darxx = 'U9' and v_datxx gt v_dat.
"You have your required date
endif.
enddo
the same has been discussed in the following link,
Reading dates from infotype 41
Hope the suggestions gave you some idea
Reward if helpful
Regards
Byju

Any tool to upload data to Fast entry (pa42) infotype

Hi all,
is there any tool like LSMW to upload data for Fast entry actions infotype?
Regards,

Hi dear Kavitha,
U can use S-CAT and BDC for that.
BDC u can record at transaction code SHDB.
Make a template for the same and uplaod.
(ABAPer Help is required fopr BDC though its a small task if u understand the same)

PA 71-- Fast Entry of Time data

Hi Experts,
I would like to understand do we have any workaround to add text to 2001/2002 infotype when we maintatin data thru PA71 like we do in PA61.
Regards
Joe

Hi
when you enter a record in 2001 infotype you can actually a select the Edit in the menu and there is an option to maintain text against the leave type. I am looking for the same functionaly to maintain text in fast entry screen.
Regards
Joe

Fast entry of Time data

Hi all,
i'm looking for a way to enter a lot of entries for a lot of EE.
PA71 don't permit to do this for IT2012, and 41.
-> Does anybody have an idea?
Thanx

Hi Fafa,
If you can assign the infotype 2012 to Inftotype menu 09-Fast Entry for Time you can do fast entry using PA71. Like wise if you assign the infotype 41 to infotype menu 07-Fast entry for Master Data, you can do fast entry using PA70.
U can assign the infotypes to infomenu following path:
Personnel Management -- Personnel Administration -- Customizing Procedures -- Infotype Menus
Under that you need to perform Infotype Menus, and probably setup infotype menus for fast entry
Hope this will help you to resolve your issue.
Thanks

Fast Entry screens

Dear all,
Can anybody explain me in detail what is meant by fast entry screen?
Will award full points.
Thanks & Regards,
AR

Hi
To me more specific it is not just Fast Entry it is GL Fast Entry.
The use of GL Fast Entry -say I have to pay rent to 100 buildings with different GL accounts and I have to also account for my printing and stationery and some more expenses from only on cash account or bank account,this can be achived by using GL fast entry.
It saves time in entering the data,the user need not go into screen by screen for entering the line items,the line items in total can be entered in a single sceen and can also be verfied for its accuracy since the data is entered in a single screen.
Also Note GL fast entry can only be used for GL accounts,it canot be used for Vendors and customers.
Hope it helps
Good Luck
Hari

FAST Entry- A/P

Hi Gurus
Pls let me know whether we can post different vendor invoices and payments at a time, but document numbers should be different for every entry. eg:- Rent payment
Vendor a/c DR. [many vendors are there- need to post as if one document but different doc nos should be generated for each vendor]
To Bank a/c CR.
If this can be done, there is an advantage to reverse the payment for individual vendor.
Kindly help
Regards
Vikram

Hi,
If only one fast entry screen will be used for your infotype, just leave screen control in T588Q as blank.
And just make sure the screen control value is the same when you Assign screen control to infotype menu 07 (fast data entry) and Define infotype text for new assigned screen.
Screen control just used for the case if there are many different fast entry screens you want implement into PA70.
For 'My screen aprears correctly but alwalys in display only', just check the code of your fast entry screen, I think it should be different from overview screen. As you said you just copy the overview screen, I suggest you change it. Also I suggest you to refer infotye P0015(module pool MP001500, screen 5000).
Hope helps,
Chen Jian

Fast Entry Screen for f-54 & F-39

hai,
Any Fast Entry Screen is available for F-54 & F-39 for down payment clearing.
govind.

Hi Govind,
No fast entry screen is available for both transactions as it is only meant for clearing invoices and not passing line items.
The transactions screens are designed in such a way it caters only to specific transaction needs.
Hope this helps.
Pls award points....
Vinay

Issue in F-26(Incoming Payments Fast Entry) Transaction

Hi all,
I am using f-26(Incoming Payments Fast Entry) tcode. In this for each customer with the company code and the payment term, depending on the document date, the cash discount is been calculated on the Gross amount for the line items of that customer.
In the tcode it will calculate, But I need to do the uploading using this tcode, and need to calculate those cash discount amounts in my code.Because of lot of payment terms, it is combossum to do it in the code.
Can anybody tell me how to handle this, is there any FM for this.?
Plz check the tables: BSID, T052.
payment term fieldname: BSID-ZTERM.
cash discount fields: T052-ZPRZ1, T052-ZPRZ2.
Plz check its very urgent, My ticket is escalting in 2 days. Plz reply me if any body has done this before.
Kumar

sorry kumar,
but there seems to be no fm for your purpose
discount is a very complex topic because of:
tax, foreign currency, day of payment,
booking net or gross, etc.
-> look include MF05AFA0_AUSGLEICH_MIT_BUCHEN
-> i guess, you've to program it by yourself
regards Andreas

Tcode PA70(Fast Entry) using SAP GUI for HTML

Hi Gurus,
when i am copying data(one row) from excel sheet into infotype using
tcode PA70(Fast Entry),through EP(transaction iview Created Using SAP
GUI for HTML).
enter TCODE PA70-> select Recurring Payments/Deductions -> click
create -> copy the data from excel sheet and past
The whole row of data is copied into one field . the data is not copied
into the corresponding fields.
please find the screenshot.
<a href="http://img337.imageshack.us/i/guiforhtml.jpg/">[IMG]http://img337.imageshack.us/img337/1723/guiforhtml.jpg[/IMG]</a>
Uploaded with <a href="http://imageshack.us">ImageShack.us</a>
Regards
K Naveen Kishore.

Hello Naveen,
I don't think this is possible. Please see note 314568 about the limitations of the SAPgui for HTML (webgui), the "Clipboard access" section seems to describe this limitation.
Edgar

Fast entry sheet

Guru's
I wish to include a fast entry sheet in my application.
User enter the personal sub area than a excel sheel will open having all personal no. from tht personal sub area.
Now user will enter some data.
How this can be done please guide.
Regards

create using table control

How to add the field sapcomponent in fast entry screen

Hi ,
This is reg the support message which is created using crmd_order.
I have a requirement in which the field sapcomponent in the transaction tab which
has to be placed in the fast entry tab also.On populating this in the fast entry screen the same value
should also be populated in the transaction tab.
Guide on how to create the field in the fast entry screen and how to link it with the transaction tab.
Step by step procudure to achieve this is appreciated.
Regards,
srikanth.

Hi Ana,
Greetings and Good Morning.
We are currently going through the implementation of electronic nota fiscal in R/3 and have already implemented the old data sources and BCT for the same. Do you have any idea for enhancing the new data structures. Looks like you have gone through this recently.
Do you have a new BCT available for the same.
Kindly send me some info.
Thanks
regards
MS

Only G/L accounts can be entered on the fast entry screen

We are currently upgrading our SAP environment from version 4.70 to ECC 6.0. Our users are testing their Parked Document fast entry screen entries created through F-65 and when they attempt to "view" their entry on the Fast Entry screen, after entering their data, they receive the message "Only G/L accounts can be entered on the fast entry screen" (message FP032). The system will not let them post the entry. The account field in the original fast entry screen was limited to 6 numeric digits, which is the length of our GL accounts and also the length of the account number used in the field when entering their posting.
I created a new fast entry screen layout for parked documents that opens up the field length to 15 characters and all works great. But I would still like to know why the original fast entry screen posted the error on the fast entry screen for an account number with the correct amount of digits.
Thanks,
Mary Lauber

Dear mary
Run program RFFAKP01 via transaction SE38. Enter program SAPLF040 / application PRPOS. Click on Execute.
This will regenerate the fast entry screen including your customized templates. And also, please check with O7E4/O7E5 to see if everything is set correctly.
If it helps please reward with points.
Best Regards
kesav

IT 0041-Date Specifications Quick / Fast entry

Similar Messages

Maybe you are looking for