IT 0045 issue

Dear all
I hired one employee and ran payroll for the month of April 2011. This employee have IT 0008, 0014, and 0045. From 01.05.2011 onwards this employee is on Deputation. so i had delimit 0014  and 0045. after that i ran payroll for May 2011. but system showing below error.
" No valid infotype 45 record exists for the loan (FEST, 01), although
this loan has not been completely repaid.
Check the validity period for this loan!
A valid infotype 45 record must exist for an open loan "
Please help on this issue
Thanks and Regards
Madhu

Madhu,
As error said, you need to do the repayment first then only you can delimit the record. What you can do in this case is create a external repayment (third tab of IT0045) and put the amount which is balance there. In this way you are giving input to the system that loab repayment is done without anypayment.

Similar Messages

  • Infotype 0045 issue

    Hi all,
    I am modifying infotype 0045 (loans). In this infotype there is a tab - basic data. In this tab, there is a field end of loan(P0045-DLEND). This field is greyed out by default and the value gets calculated automatically depending on some conditions. I made this field input enabled by going into its layout ( screen no 2001). When I did this, its allowing me to enter a date value in this field. But the moment I press enter, The value which I had input vanishes and the calculated value there. I want my value to stay there in the field P0045-DLEND.
    Please suggest what to modify and where. I am really in need of the solution as the times r short.
    Ribhu

    Hi,
    I think you can get it by  Deactivating  the PCR XLON or  deactivating P0045 function in the respective schema. 
    Just try it out.
    Regards,

  • Payroll Issues in Net payment

    Dear Experts,
    Business Scenario
    The employee is on leave for 2 months (paid leave)in that 2 months loan should not deduct. 3rd month he came back and the laon amount should be deduct .
    So,In Master Data for IT45 maintained record for those 2months in "Condition" amount=0 and for the next month onwards maintained regular installment payment which he has to pay.
    When I am running payroll for the 3rd month am getting Loan Type Error as below
    Error with a loan wage type
    A loan wage type in table RT should be deducted, however the
    however the remaining net amount was too small
    Wage type /LRP
    Please lower the loan repayment in infotype 0045
    Choose an amount that can be deducted
    while running simulation for 4th Month their is no Error in Payroll Log But for the 3rd Month "NET PAYMENT" is showing as Zero in Payslip and not showing in RT table also
    Note: This Net Payment issue for the 3rd Month is not only  to the above scenario Employee it is not showing for ALL EMPLOYEES.
    Kindly help me in resolving this issue as this is Very Very High, your immediate response is highly Appreciable
    Regards,
    Rao.

    Dear....
    Please check that u press the calendar button to regenerate the last payment date and also check that repayment plan in IT0045
    another thing check IT0078, what will be shown there????.
    After that run one by one payroll for the months you have no deduction of loan and check is there any loan deduction or not.
    What you have to do for skipping loan payment is copy the current loan and make the repayment amount zero, i hope u did the same but in the last split u have to recalculate the payment date.

  • Create Recovery Media crashes on Windows 7 SP1 and Rescue and Recovery 4.51.0045.​00

    I installed Rescue and Recovery 4.51.0045.00 right after a fresh installation of Windows 7 Home Premium SP1 (Build 7601 64 bit) on my Thinkpad Edge 11. After hitting "Advanced Rescue and Recovery" and then "Create Rescue Media" I get a "Create Recover Media has stopped working" error with the problem Signature:
    Problem Event Name: APPCRASH
    Application Name: RRMedia.exe
    Application Version: 4.51.27.0
    Application Timestamp: 513d7dbd
    Fault Module Name: RRMedia.exe
    Fault Module Version: 4.51.27.0
    Fault Module Timestamp: 513d7dbd
    Exception Code: c0000005
    Exception Offset: 00004451
    OS Version: 6.1.7601.2.1.0.768.3
    Locale ID: 1033
    Additional Information 1: 3d61
    Additional Information 2: 3d617f89c03aec75ed4c33477fb666c5
    Additional Information 3: 62ba
    Additional Information 4: 62ba33999ddd637bc95b614e6779b3ea
    Uninstalling and then reinstalling Rescue and Recovery doesn't work - I still get the same error when trying to create recovery media.
    Any tips would be greatly appreciated.

    Hi Customer,
    We have below workaround for fixing your issue, would you please try and feedback result to me?Thanks.
    delete the below registrykey  :
    "spilock"="1382411866.78"
    [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Lenovo\sp​i\RNR Boot Media]
    "spilock"="1382411866.78"

  • HR ABAP: Issue with using 'nocommit' parameter on FM HR_INFOTYPE_OPERATION

    Issue with using nocommit parameter on FM HR_INFOTYPE_OPERATION:
    My client has a requirement to create the following 4 infotypes in sequence in a LUW, i.e either all are created or none is created.
    9045   (custom infotype)
    0045
    0078
    0015
    I tried to use the nocommit parameter on FM HR_INFOTYPE_OPERATION to insert the 4 infotypes
    in a nocoomit mode and then at the end I have issued
    'Commit Work', but to my surprise only I/T 0015 is created in the database and the first three (9045, 0045 and 0078) did not make it to database.
    I searched many threads on SDN but could not find a solution.
    Please let me know if there could be any solution to implement the LUW.
    YOur inputs will be appreciated.

    Hi ,
    i think u can also try with this FM HR_MAINTAIN_MASTERDATA , see its documentations.
    no commit works like a simulation mode , what u can do is  ,
    call FM for all Infotypes and collect all error msgs if any , then finally call FM for all infotypes again without passing nocommit work ( i.e space).
    regards
    prabhu

  • Issue Regarding PCR-Time Management

    Hi All,
    The requirement is to not to consider break schedule assigned in work schedule for an attendance type calculation hours .
    For example if employee is taking this attendance 16 hours , now its deducting 0.5hr break .Payment has to be made for all worked hours with out breaks.
    Please let me know we can make any set up through configuration or PCR.
    Can any body help me in creation of PCR?
    I ahve written a PCR as follows but its not working
      819Z
             OUTWPPLANT
                 0045(Personal area)
                  OUTTPVTYPE
                        C(attendance type)
                        HRS=1303(time type)
                        HRS+0.5 (0.5hrs of break which is getting reduced in daily work schedule)
                        ADDDB1303
                        ADDZL  6803( wage type for  calculation of attendance payment )
    Can anybody help me in correction of this PCR please?
    Regards,
    Evani
    Edited by: Sikindar on Apr 11, 2011 6:44 PM

    Hi All,
    I  have written PCR  considering holiday class,day type and  issue got resolved .
    Thank you all for your support.
    Regards,
    Evani

  • Adobe Flash Player 11.5 issue

    Hi,
    I have installed silently Adobe Flash Player 11.5 on Windows 32. It is detecting the correct version from http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html. My issue is, when I install it and then uninstall it silently, then reinstalling it, giving me the following error. Can anyone have get around for this. Please help.

    =O====== M/10.1.53.64 2013-01-31+18-49-01.494 ========
    0000 [I] 00000010 "\\GLIC.COM\GUARDIAN\APPS\Source\Adobe-Flash-Player-11-4\R1\uninstall_flash_player.exe" -force   -uninstall
    0001 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0002 [W] 00001018
    0003 [W] 00001037 Software\Macromedia\FlashPlayer\SafeVersions/ 2
    0004 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player ActiveX/ 2
    0005 [W] 00001019
    0006 [W] 00001020
    0007 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
    0008 [W] 00001037 Software\Macromedia\FlashPlayerActiveX/ 2
    0009 [W] 00001037 Software\Macromedia\FlashPlayer/FlashPlayerVersion 2
    0010 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
    0011 [W] 00001037 Software\Microsoft\Code Store Database\Distribution Units\{D27CDB6E-AE6D-11CF-96B8-444553540000}/ 2
    0012 [W] 00001021
    0013 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0014 [W] 00001018
    0015 [W] 00001036 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
    0016 [W] 00001037 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
    0017 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player Plugin/ 2
    0018 [W] 00001019
    0019 [W] 00001020
    0020 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
    0021 [W] 00001037 Software\Macromedia\FlashPlayerPlugin/ 2
    0022 [W] 00001037 Software\Macromedia\FlashPlayer/FlashPlayerVersion 2
    0023 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
    0024 [W] 00001021
    0025 [W] 00001036 Software\Opera Software/Last CommandLine 2
    0026 [W] 00001036 Software\Opera Software/Last CommandLine 2
    0027 [W] 00001036 Software\Opera Software/Plugin Path 2
    0028 [W] 00001036 Software\Opera Software/Plugin Path 2
    =X====== M/10.1.53.64 2013-01-31+18-49-01.603 ========
    =O====== M/11.5.502.146 2013-01-31+19-05-16.322 ========
    0000 [I] 00000010 "\\glic.com\Guardian\Appsai\Source\Adobe-Flash-Player-11-5\R1\uninstall_flash_player.exe" -force 
    0001 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0002 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0003 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0004 [W] 00001018
    0005 [W] 00001037 Software\Macromedia\FlashPlayer\SafeVersions/ 2
    0006 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player ActiveX/ 2
    0007 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
    0008 [W] 00001037 Software\Macromedia\FlashPlayerActiveX/ 2
    0009 [W] 00001037 Software\Macromedia\FlashPlayer/FlashPlayerVersion 2
    0010 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
    0011 [W] 00001037 Software\Microsoft\Code Store Database\Distribution Units\{D27CDB6E-AE6D-11CF-96B8-444553540000}/ 2
    0012 [W] 00001021
    0013 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0014 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0015 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\System.ControlPanel.Category/C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 2
    0016 [W] 00001048
    0017 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
    0018 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0019 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0020 [W] 00001037 SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\\FlashPlayerApp.exe/ 2
    0021 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\System.ControlPanel.Category/C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 2
    0022 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0023 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0024 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0025 [W] 00001018
    0026 [W] 00001036 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
    0027 [W] 00001037 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
    0028 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player Plugin/ 2
    0029 [W] 00001019
    0030 [W] 00001020
    0031 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
    0032 [W] 00001037 Software\Macromedia\FlashPlayerPlugin/ 2
    0033 [W] 00001037 Software\Macromedia\FlashPlayer/FlashPlayerVersion 2
    0034 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
    0035 [W] 00001021
    0036 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0037 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0038 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\System.ControlPanel.Category/C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 2
    0039 [W] 00001048
    0040 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
    0041 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0042 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0043 [W] 00001037 SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\\FlashPlayerApp.exe/ 2
    0044 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\System.ControlPanel.Category/C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 2
    0045 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0046 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0047 [W] 00001036 Software\Opera Software/Last CommandLine 2
    0048 [W] 00001036 Software\Opera Software/Last CommandLine 2
    0049 [W] 00001036 Software\Opera Software/Plugin Path 2
    0050 [W] 00001036 Software\Opera Software/Plugin Path 2
    =X====== M/11.5.502.146 2013-01-31+19-05-21.603 ========
    =O====== M/11.5.502.146 2013-01-31+20-25-09.881 ========
    0000 [I] 00000010 "\\glic.com\Guardian\Appsai\Source\Adobe-Flash-Player-11-5\R1\uninstall_flash_player.exe" -force 
    0001 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0002 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0003 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0004 [W] 00001018
    0005 [W] 00001037 Software\Macromedia\FlashPlayer\SafeVersions/ 2
    0006 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player ActiveX/ 2
    0007 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
    0008 [W] 00001037 Software\Macromedia\FlashPlayerActiveX/ 2
    0009 [W] 00001037 Software\Macromedia\FlashPlayer/FlashPlayerVersion 2
    0010 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
    0011 [W] 00001037 Software\Microsoft\Code Store Database\Distribution Units\{D27CDB6E-AE6D-11CF-96B8-444553540000}/ 2
    0012 [W] 00001021
    0013 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0014 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0015 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\System.ControlPanel.Category/C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 2
    0016 [W] 00001048
    0017 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
    0018 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0019 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0020 [W] 00001037 SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\\FlashPlayerApp.exe/ 2
    0021 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\System.ControlPanel.Category/C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 2
    0022 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0023 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0024 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0025 [W] 00001018
    0026 [W] 00001036 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
    0027 [W] 00001037 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
    0028 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player Plugin/ 2
    0029 [W] 00001019
    0030 [W] 00001020
    0031 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
    0032 [W] 00001037 Software\Macromedia\FlashPlayerPlugin/ 2
    0033 [W] 00001037 Software\Macromedia\FlashPlayer/FlashPlayerVersion 2
    0034 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
    0035 [W] 00001021
    0036 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0037 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0038 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\System.ControlPanel.Category/C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 2
    0039 [W] 00001048
    0040 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
    0041 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0042 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0043 [W] 00001037 SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\\FlashPlayerApp.exe/ 2
    0044 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\System.ControlPanel.Category/C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 2
    0045 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0046 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0047 [W] 00001036 Software\Opera Software/Last CommandLine 2
    0048 [W] 00001036 Software\Opera Software/Last CommandLine 2
    0049 [W] 00001036 Software\Opera Software/Plugin Path 2
    0050 [W] 00001036 Software\Opera Software/Plugin Path 2
    =X====== M/11.5.502.146 2013-01-31+20-25-16.803 ========
    =O====== M/11.5.502.146 2013-01-31+21-27-47.009 ========
    0000 [I] 00000010 "\\glic.com\Guardian\Appsai\Source\Adobe-Flash-Player-11-5\R1\uninstall_flash_player.exe" -force   -force
    =X====== M/11.5.502.146 2013-01-31+21-27-58.525 ========
    =O====== M/11.5.502.146 2013-01-31+21-28-00.071 ========
    0000 [I] 00000010 "\\glic.com\Guardian\Appsai\Source\Adobe-Flash-Player-11-5\R1\uninstall_flash_player.exe" -force   -force -silent
    0001 [F] 00001003 -silent
    =X====== M/11.5.502.146 2013-01-31+21-28-00.165 ========
    Thanks Chris for looking into my issue

  • Issue with Business connector to ECC

    Hi All,
    We are having issues when the orders from BC to vendors are failing.The chain is like this ECC idoc to BC conversion happens to xml and then sends to the vendors.We are getting a message saying like this
    com.wm.lang.flow.FlowException: [B2BCORE.0049.9010] Service 'sap2vendors:ORDERStoXML' invoking unknown service 'Failed HTTP Post' at '$default'. The service may have been renamed, moved or disabled.
    The whole problem is that some are failing and some are passing through.Thanks.

    Hi,
    When checked the server log.Got the below error.
    TransactionManager: Creating new Transaction 0A0D811E16654DCA1F7A0741
    000453  [B2BPCKG.0074.0002] TransactionManager: 0A0D811E16654DCA1F7A0741: State changed to Created
    000454  [B2BPCKG.0073.0032] Runtime: <-- Sender: 1000 Receiver: <number>
    MsgType: ORDERS Tid: 0A0D811E16654DCA1F7A0741
    000455  [B2BPCKG.0073.0037] Runtime: invoking Flow sap2vendors:receiveORDERS000<number>
    000456  [B2BPCKG.0073.0045] B2B Transport: --> OutboundProcess invoking sap2vendors:ORDERStoXML locally
    000457  [B2BCORE.0064.0014] Opening Socket https://<IPAddress>/invoke/CorporateExpress/receive  proxy=sparpxyapp.<hostname>:8080
    000458  [B2BPCKG.0073.0047] B2B Transport: --> OutboundProcess error: [B2BCORE.0049.9010] Service 'sap2vendors:ORDERStoXML' invoking unknown service 'Failed HTTP Post' at '$default'. The service may have been renamed, moved or disabled.
    000459  [B2BCORE.0077.0002] Unsupported email encoding  specified.  Defaulting to utf-8
    00045A  [B2BPCKG.0073.0039] Runtime: error in RR Flow sap2vendors:receiveORDERS<number>
    com.wm.app.b2b.server.ServiceException: com.wm.lang.flow.FlowException: [B2BCORE.0049.9010] Service 'sap2vendors:ORDERStoXML' invoking unknown service 'Failed HTTP Post' at '$default'. The service may have been renamed, moved or disabled.
    00045B  [B2BCORE.0077.0002] Unsupported email encoding  specified.  Defaulting to utf-8
    00045C  [B2BPCKG.0074.0006] TransactionManager: saved message body packages/WmPartners/pub/mailbox/<number>/ORDERS/0A0D811E16654DCA1F7A0741.values
    00045D  [B2BCORE.0077.0002] Unsupported email encoding  specified.  Defaulting to utf-8
    00045E  [B2BPCKG.0074.0002] TransactionManager: 0A0D811E16654DCA1F7A0741: State changed to Rolled back
    00045F  [B2BCORE.0077.0002] Unsupported email encoding  specified.  Defaulting to utf-8
    Edited by: Ambarish annapureddy on May 19, 2011 12:48 PM
    Edited by: Ambarish annapureddy on May 19, 2011 12:48 PM

  • Add Infotype 0045(Loans) to Personal Profile

    Hi All,
    I am currently on EHP6 and i am trying to add Infotype 0045 to personal profile application but i am facing issues.
    I have followed the steps with few exceptions from the below link:
    Adding any Info Type IN ESS in EHP5/6 through WebDynpro Configuration
    I have added the infotypes in HRPAD and V_T7XSSPERSUBTYP.
    I have created all the required configuration(FORM_UIBB, LIST_UIBB and OVP_COMPONENTS).
    I have created proper wiring as well and implemented the Default start date BADI as well.
    I have already make it to work for few other Infotypes.
    I am not sure why is it not working for IT0045.
    Please let me know in case you have any views on this.
    Regards,
    Mayank

    Hi,
    i have already checked all the settings and they all look fine.
    However, to be on the safer side i have also EDITED the same configurations and wiring to make it work for other infotype, and it works correctly for others.
    The problem is something specific to IT0045.
    Regards,
    Mayank

  • LOANS INFOTYPE - (0045) HIDE PAYMENTS TAB

    Dear Friends /Gurus
    Requirement :- For info type  0045 , is there any way to hide the Payment tab available there, the Loan payments should be done only through 0078 info type
    We can do this using SHD0
    But any other option available..
    thanks & Regards
    Srijit R Menon

    u got the Point Exactly
    when the FI pays the laon it shd be from IT0045  first Tab
    10,000 AED
    and repayment installment in the second tab  1000
    and in the third tab we must maintain whether it is External payment or payment thru Pay roll
    for Ex if an employee gets a cheque and it the amount is not include in the Pay slip
    than the payment shd be External than in the first moth
    only deduction will be seen as it is external payment , if it is done thru Internal payroll
    bioth advance give and deduction will come in the pay slip
    let me check the option for hideing
    And check this issue how the User want to deal in such kind of siturations
    not sure try  VV_T588M_45  Field is TAB_PAY  hide it u 
    Edited by: Sikindar on Jun 10, 2009 3:11 PM
    Edited by: Sikindar on Jun 10, 2009 3:17 PM

  • New DVR Issues (First Run, Channel Switching, etc.)

    I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
    I recently switched to FIOS from RCN cable in New York.  I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
    1.  I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention.  Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording.  I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows.  I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR.  Is there a setting I can change that will force the DVR to choose one of the recording channels?
    2.  I setup all my recordings for "First Run" because I only want to see the new episodes.  One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day.  My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new".  Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR.  Any fixes?
    Thanks for the help.
    Solved!
    Go to Solution.

    I came from RCN about a year ago.  Fios is different in several ways, not all of them desirable.  Here are several ways to get--and fix--unwanted recordings from a series recording setup.
    Some general principles. 
    Saving changes.  When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes.  Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options.  Look at the Series Options window.  Look at the far right side.  There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes.  Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
    Default Series Options.  This is accessed  from [Menu]--DVR--Settings--Default Series Options.  This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options.  You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create.  Be sure to SAVE your changes.  This is what you will get when you select "Create Series Recording" from the Guide.  When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead.  Series Options can always be changed for any individual series set up later--but not for all series at once.
    Non-series recordings.  With Fios you have no directly available options for these.  With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series.  With Fios, your workarounds are to create a series with options for a single program, then delete the series later;  change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
    And now, to the unwanted repeats. 
    First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only".  If not, fix that and SAVE.  Then check you results by viewing the current options using the Series Manager app under the DVR menu.
    Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New".  It happens.  Set the series option "Air Time" to "Selected Time".  To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide.  Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored. 
    Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New".  These can be ignored in your series if you set the series option "Channel" to "Selected Channel".  Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes".  However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.  
    As for you missing two minutes,  I have sereral instances in which two programs start recording at the same time.  To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time.  You might have an older software version.  Newest is v.1.8.  Look at Menu--Settings--System Info.  Or, I might not have noticed the loss of minutes.  I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording.  There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them.  With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

  • Pension issue Mid Month Leaving

    Dear All,
    As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010                    0.00           6,500.00.
    Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
    Please suggest.
    Ashwani

    Dear Jayanti,
    We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
    RT table for year 2010. DOL 26.04.2010
    /111 EPF Basis              01/2010                    0.00           8,750.00 
    /139 VPF Basis              01/2010                    0.00           8,750.00 
    /3F1 Ee PF contribution     01/2010                    0.00           1,050.00 
    /3F3 Er PF contribution     01/2010                    0.00             509.00 
    /3F5 Ee Mon PF contribution 01/2010                    0.00           1,050.00 
    /3F6 Ee Ann PF contribution 01/2010                    0.00          12,600.00 
    /3F9 PF adm chrgs * 1,00,00 01/2010                    0.00              96.25 
    /3FA PF basis for Ee contri 01/2010                    0.00           8,750.00 
    /3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00 
    /3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00 
    /3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00 
    /3F4 Er Pension contributio 01/2010                    0.00             541.00
    /3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
    /3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
    /3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
    /3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
    /3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
    /3R3 Metro HRA Basis Amount 01/2010                    0.00           8,750.00
    1BAS Basic Salary           01/2010                    0.00           8,750.00
    RT table for year 2009. DOL 27.10.2009
                                                                                    /111 EPF Basis              07/2009                    0.00           9,016.13
    /139 VPF Basis              07/2009                    0.00           9,016.13
    /3F1 Ee PF contribution     07/2009                    0.00           1,082.00
    /3F3 Er PF contribution     07/2009                    0.00             628.00
    /3F5 Ee Mon PF contribution 07/2009                    0.00           1,082.00
    /3F6 Ee Ann PF contribution 07/2009                    0.00           8,822.00
    /3F9 PF adm chrgs * 1,00,00 07/2009                    0.00              99.18
    /3FA PF basis for Ee contri 07/2009                    0.00           9,016.00
    /3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
    /3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
    /3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
    /3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00 
    /3FC Pension Basis for Er c 07/2009                    0.00           5,452.00 
    /3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00 
    /3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00 
    /3R4 Non-metro HRA Basis Am 07/2009                    0.00           9,016.13 
    1BAS Basic Salary           07/2009                    0.00           9,016.13 
    Now please suggest what to do. where is the problem  ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
    With Regards
    Ashwani

  • Open PO Analysis - BW report issue

    Hello Friends
    I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
    datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
    (Delivery completed).
    We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
    We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
    complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
    quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
    delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
    following:
    DOC_NUM     DOC_ITEM       DOCTYPE     COMP_DEL
    650000001       10     UB        X
    650000001       20     UB        X
    650000001       30     UB
    650000001       40     UB      
    When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
    system.
    Any help is appreciated in this regard.
    Thanks and Regards
    sampath

    Hi Priya and Reddy
       Thanks for your response.
                         Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
                        I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
                       In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
    Record No.    Doc.No.                    Item              Processkey         Rocancel     Elikz
        41               6500000001            30                    11                            X           ---    
        42               6500000001            30                    11                            ---           X
        43               6500000001            30                    10                            X           ---
        44               6500000001            30                    10                            ---         ---
    (Here --- means blank)        
    Thanks and Regards
    sampath

  • HP LaserJet Enterprise 600 M602 driver issue

    Hello,
    I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
    Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
    Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
    Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
    Regards,
    Anatoly

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Windows 7 displays error message when exiting +cursor issue

    Two issues here. CS5 Phoshop on Wind 7 64 bit.
    Physical processor count: 8
    Processor speed: 3073 MHz
    Built-in memory: 12279 MB
    Free memory: 9577 MB
    Memory available to Photoshop: 10934 MB
    Memory used by Photoshop: 80 %
    Image tile size: 128K
    First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
    The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
    Any help will be gratefully accepted.
    Doug

    function(){return A.apply(null,[this].concat($A(arguments)))}
    doug87510 wrote:
    The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
    Well, that issue is simply a matter of hitting the Caps Lock key.  When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair.  That's a feature, not a bug.
    Glad to hear the 11.1 drivers are out.  I will download them and try them now myself.
    Regarding "Adobe QT" crashing...  QT brings to mind QuickTime, though that is Apple, not Adobe.  Do you have Apple QuickTime installed?
    Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
    -Noel

Maybe you are looking for

  • Unique permissions for Toplevel teamsite and NewForm.aspx?

    Perhapse I dont know how to seach for this but I cant manage to find anything in the forums here that addreses this specifically.  If I am in error concerning that PLEASE point me in the right direction, otherwise this is my issue: I have created a f

  • Suggestion about Report Generation Toolkit

    I'm adding report generation capabilities to a labview product test application.  The report will be 2-4 pages long with text and plots.  For other applications, I've used Word Templates in the past using VBA and Visual Basis 6.   I had been planning

  • How to create a Macro in excel to store the excel data to Oracle Database

    Hi All Does anyone has created a macro in excel which on being run stores the excel data to Oracle database. In my project I need to create one such macro for updating oracle database with excel data and another for inserting excel records. I tried d

  • Fonts that do not get turned to images?

    I have intensely been working to learn the new Captivate 6 especially regarding the output to HTML6 since our online classroom is going mobile this year. I have published a project and all the text has been turned to images. At first, I realized that

  • ITunes shutting down after upgrade to 9

    I just upgraded to release 9 (in large part because I just bought an iPhone). Right after I finished the upgrade, iTunes started closing within 7 to 8 seconds of launching. Any ideas?