IT 0210

Hi,
We have applied OSS note 1514526 related to BSI-TUBS.
Under IT 0210 (Withholding Info W4/W5 US) for Tax Authority MS( Mississippi) the field Additional withholding is not Editable. We are not able to enter an amount there. Is there any additional note that needs to be applied to make it Editable.
Please Advise.
Regards,
Ghanapriya

If you manually config tax authorities behavior (view V_T5UTZ), when applying OSS related to BSI tubs, there's a good chance the config is overwritten, and would need to be re-applied.
Go to view V_T5UTZ, and then go to tax authority 'MS' - double click to go to detail screen. Check that 'Add amt. prohibited' field is un-checked.

Similar Messages

CRS-0210: Could not find resource while start ASM on 10G RAC

Dear All
I'm trying to install 10g RAC on Redhat 4.1. At the point at which I try to start ASM it fails with the message
ORA-03113: end-of-file on communication channel
select value from v$parameter where name='instance_type'
ERROR at line 1:
ORA-01034: ORACLE not available
This seems to be due to a failure CRS. The trace file shows:
[Thread-11] [17:14:2:907] [HAOperationImpl.runCommand:1254] CRS cmd is: /u01/app/oracle/product/10.2.0/crs/bin/crs_stat -u ora.bfhxx-sql012.ASM1.asm
[Thread-41] [17:14:2:964] [StreamReader.run:65] OUTPUT>CRS-0210: Could not find resource ora.bfhxx-sql012.ASM1.asm.
Executing
/u01/app/oracle/product/10.2.0/crs/bin/crs_stat
produces:
NAME=ora.bfhxx-sql012.LISTENER_BFHXX-SQL012.lsnr
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
NAME=ora.bfhxx-sql012.gsd
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
NAME=ora.bfhxx-sql012.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
NAME=ora.bfhxx-sql012.vip
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
Is this a red herring or is it the reason ASM won't start? At what point should this entry have been created (ie should it already exist when ASM starts or should ASM create it)? Can I manually create the entry using crsstat.
Many thanks
Paul

It all depends on what your mapping problem was and what you did to resolve it. Here are a couple of things you could try:
-Make sure the orc.loc file on ebdb1 has the same entry as ebdb2. Also, say you are using shared raw devices for CRS: make sure your raw devices are consistent on both nodes.
If the above does not work
-Make sure the shared devices are consistent on both nodes and restore one of the OCR backups. I am sure at least one of the backups 4hrs/8hrs/1day/2day/1week some thing must be a worthwhile. If you do restore OCR from a backup make sure to run cluvfy before you start your CRS.
Always a good practise to take a backup of status quo before you restore from the backups.
It would be interesting to know what lead to your disk mapping problem in the first palce.
Good Luck!

Error 0210: stuck key 2b - t61 thinkpad + windows 7 32 bit

When ever I switch on the system i get this message error 0210: stuck key 2b". If I press esc key then it boots to the os windows 7 and also after booting up, if I open any ms word doc, the # key gets pressed automatically and I could see continous # characters getting typed in the doc. THis has started only after installing the w7 in my thinkpad. Can anyone suggest me if this is an os problem or keyboard failure. THis is repeating even after I clean the keypad and then turn on. This is happening in bios as well, I get a continous beep sound even in the bios as if some key is getting pressed all the time. So please let me know do I have to change the whole key board or just reseat the connection or something else is pending. Please help me, I am wondering why this problem has started immediately after I installed the window 7. If its an os problem, y am i getting the beep sound in bios, so i think its definetly not the os prob. Something wrong with the keys is it not. Any suggestions or tips are appreciated, I ran the HD diagnostic, it passed.
THanks,
Solved!
Go to Solution.

manu555,
If this is occurring in BIOS as you note, that rules out anything having to do with the OS.   As GMAC-R60 suggests, this points to the keyboard being bad, or having a bad / intermittant connection to the system board, or something on the system board going bad.
I would try:
Checking the physical keyboard connection:
Remove and unplug the keyboard - inspect the keyboard plug for any visible corrosion or damage. Plug it back in carefully and try again. If the problems are still occurring, then try..
Clearing CMOS and resetting BIOS defaults - sometimes you get some stuck bit that causes an abnormal state:
Remove battery & AC adapter. Press and hold the power button several times for a count of 5 each time.   Re-attach AC and restart the computer.    Go into BIOS and reload factory defaults and save. (there is a option to restore factory defaults). Shut down. Put in your battery and restart.
Try replacing the keyboard - you can contact service and order a replacement keyboard outside of warranty, or source on from a local business partner (if there are warranty authorized resellers in your area, they will have the keyboard in stock, or be able to order it).   Or, check online sales - ebay, etc as you wish.
If none of these steps resolve it, then my next suggestion would be the system board, but I think that is rather unlikely.
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

T500 - error 0210 key stuck 01

hello,
i have a problem. i want to access the eeprom from my t500. you need to press the esc button several times on boot up.
but when i do this i get the error 0210 key stuck 01.
none of my keys are stuck they are all working. can someone help me please? i tried googling for an answer but could not get much wiser...thanks for any help.
Solved!
Go to Solution.

Are you in possession of the IBM Hardware Maintenance Diskette?
This is from the Hardware Maintenance manual.
Restoring the serial number of the system unit
When the computer was manufactured, the EEPROM on the system board was
loaded with the serial numbers of the system and all major components. These
numbers need to remain the same throughout the life of the computer.
If you replace the system board, you must restore the serial number of the system
unit to its original value.
Before replacing the system board, save the original serial number by doing the
following:
1. Install the LENOVO ThinkPad Hardware Maintenance Diskette Version 1.76 or
later, and restart the computer.
2. From the main menu, select 1. Set System Identification.
3. Select 2. Read S/N data from EEPROM.
The serial number of each device in your computer is displayed; the serial number
of the system unit is listed as follows:
v 20: Serial number
Write down that number.
Note: The serial number of the system unit is also written on the label attached to
the bottom of the computer.
After you have replaced the system board, restore the serial number by doing the
following:
1. Install the LENOVO ThinkPad Hardware Maintenance Diskette Version 1.76 or
later and restart the computer.
2. From the main menu, select 1. Set System Identification.
3. Select 1. Add S/N data from EEPROM.
Follow the instructions on the screen.
If the MTM and Product ID numbers differ from each other on the rear label, use
what is shown for the Product ID field. See example below:
MTM on rear label:
TTTT-CTO S/N SSSSSSS
Product ID on rear label:
TTTT-MMM (Use this number when setting Serial Number)
In the example, the Serial Number to be input is ’1STTTTMMMSSSSSSS’.
Retaining the UUID
The Universally Unique Identifier (UUID) is a 128-bit number uniquely assigned to
your computer at production and stored in the EEPROM of your system board.
The algorithm that generates the number is designed to provide unique IDs until
the year A.D. 3400. No two computers in the world have the same number.
When you replace the system board, you must set the UUID on the new system
board as follows:
1. Install the LENOVO ThinkPad Hardware Maintenance Diskette Version 1.76 or
later, and restart the computer.
2. From the main menu, select 4. Assign UUID.
A new UUID is created and written. If a valid UUID already exists, it is not
overwritten.
Reading or writing the ECA information
Information on Engineering Change Announcements (ECA) are stored in the
EEPROM of the system board. The electronic storage of this information simplifies
the procedure to check if the ECA has been previously applied to a machine. The
machine does not need to be disassembled to check for the ECA application.
To check what ECAs have been previously applied to the machine, use the ECA
Information Read/Write function on the LENOVO ThinkPad Hardware
Maintenance Diskette Version 1.76 or later.
1. Insert the LENOVO ThinkPad Hardware Maintenance Diskette Version 1.76 or
later, and restart the computer.
2. From the main menu, select 6. Set ECA Information.
3. To read ECA information, select 2. Read ECA/rework number from EEPROM
and follow the instruction.
4. To read box build date, select 5. Read box build date from EEPROM, and
follow the instruction on the screen.
After an ECA has been applied to the machine, the EEPROM must be updated to
reflect the ECA’s application. Use the LENOVO ThinkPad Hardware Maintenance
Diskette Version 1.76 or later to update the EEPROM.
Note: Only the ECA number is stored in the EEPROM. The machine type of the
ECA is assumed be the same as the machine type of the machine that had the ECA
applied to it.
1. Insert the LENOVO ThinkPad Hardware Maintenance Diskette Version 1.76 or
later, and restart the computer.
2. From the main menu, select 6. Set ECA Information.
3. To write ECA information, select 1. Write ECA/rework number from EEPROM,
and follow the instruction.
4. To write box build date, select 4. Write box build date from EEPROM, and
follow the instruction on the screen.
If the system board is being replaced, try to read the ECA information from the old
system board and transfer the information to the new system. If the system board
is inoperable, this will not be possible.
Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

T42 error code 0210: Stuck Key FE

I received this computer for chistmas as an IBM certified used equipment. It had been working great until last week when I needed to print out a homework assignment.
When I powered it up I received the code 0210 stuck key FE. All the keys seem to be free for use. When I get it to the windows xp sign in window the track pad, track button, and key pad do not function.
Is the computer fixable or worth fixing?

Hello,
Even myself are facing same error message while switch on(power on) laptop
using ibml lenovo thinkpad edge series
error
0210 : stuck key 36
press <F1> to setup...
nothing happen here none of the keys are working when this message popup except direct power off.
possible if anybody share such experience solution.
highly grateful.
regds
wasi

When booting I get an Error 0210: Stuck Key 01 Lenovo Thinkpad

Hello,
When powering on I get this error
"Error 0210: Stuck Key 01
Press <F1> to Setup" Please give your valuable suggestions. Thanks in advance. Sukumar

Hi Sukumar,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you are getting stuck key error in your Lenovo ThinkPad.
Stuck key error means that one or more keys on the keyboard are stuck. It's possible that a liquid spill can also cause one or more keys to electrically "short" causing the error. Inspect the keyboard and check if any keys are mechanically stuck.
If you're mechanically handy you can remove the keyboard, inspect any chances of damage or corrosion. Plug it back and see if error is still occurring.
Reset BIOS to default settings. Perform Flee Power – remove the battery and any other peripheral device connected to the computer. Hold the power button for 10-15 seconds and then connect only the AC Adapter and turn ON the computer.
If none of the above said helped to resolve your concern, I strongly recommend you to contact our technical support for assistance.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Best Regards,
Mithun.

T43 getting ERROR 0210 Stuck Key FF

My laptop will not boot up outside the docking station. Nor will it boot up when I have it docked unless I have a PS2 mouse attached. Outside the docking station or without the mouse the ThinkPad splash screen comes up but doesn't go anywhere and the Access IBM key does not work.
BUT, when I plug in the PS2 mouse the boot up proceeds and shows the following:
ERROR
0210 Stuck Key FF
Press <F1> to SetUp
So, I press F1 and it goes to the Bios then I F10 and the system completes the boot process. Yesterday I did a complete System restore to Original Manufacturer settings to see if that would fix my problem but it doesn't. So, I have a laptop that only works when it's in a docking station so it's not very portable.
Any ideas?
Dave in Arkansas

I am reaching but, they way you describe it.... Sounds like a CMOS battery. Cheaper than most options and possibly issue.
when it is in Dock it is drawing power to devices - out of dock it holds the settings via battery - like I said it is a stretch but a cheap first step.
Harware Maint Manual T43 page 44 (checking Backup Battery)

Error 0210 stuck key 38 on T400

Hi, I have T400 running windows 7 64 bit. Today my keyboard stoppded working after windows updated but mouse was working. I tried to check the device manager. It says it is working fine and also tried to update key board driver but there was no update.
After that I tried to retstart but now get this 'error 0210 stuck key 38' at the start and sysmtem dont boot up at all. Tried multiple time but no luck. Tried to go to Bio but cant do anything because Keyboard not working there either.
Plz can anybody help me guide what kind of problem it is like sotware or harware or Bios issue.

The new version of PC Doctor is called Lenovo System Toolbox, if you don't already have it on your T400, download it here:- http://www-307.ibm.com/pc/support/site.wss/MIGR-67520.html
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Error 0210: Stuck Key 1C

When I try to log into my Lenovo X200 Tablet it starts to beep and I get "error 0210: stuck key 1c". It then tells me to press F1 to set-up. I do this then I am in an area I know nothing about. Could someone please help me with this and please use language that a not-so-techie person can understand what to do. I thank you for reading this and look forward to hearing from someone soon.

you may need to replace your keyboard. Try to reconnect the ribbon cable that connects the keyboard to the motherboard. Do you have warranty remaining?
http://www-307.ibm.com/pc/support/site.wss/MIGR-70830.html
Follow the above manual if you don't know how.
If the problem persists after you did this, then you would need a new keyboard.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Error 0210 : stuck key 04

I get this message when I boot up my computer (error 0210: stuck key 04). Each time I need to go restart in the initial settings when pressing F1. It odes not do it each time, but quite often.
Any ideas? Thanks.

In almost all cases, this kind of error means you need a new keyboard

Error 0210: Stuck Key 3E

Lenovo R400
If starting I get this Error
0210: Stuck Key 3E
What key make this error?
If system is loading cursor dont working via touchpad.
If I press WIN key which open start menu, or a volume key, touchpad start working.
F4 key dont working.
I tryed reset BIOS - problem continue.
https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/When-booting-I-get-an-Error-0210-Stuck-Key...
Solved!
Go to Solution.

Thank You very much!
I again tried to remove all the buttons except large buttons.
Via compressor blow all.Using tweezers for hair pulled out.
I think that the problem is caused by hair wrapped around the pantograph system of button.
I tried to turn on the notebook without buttons.
It seems to work ok. F4 button working.
I will try buttons pushed on keyboard.

ERROR 0210: Stuck Key 36

Hi all, I met this "ERROR 0210: Stuck Key 36" on boot-up in March, and was later told to upgrade the BIOS to 2.12, then the problem got solved. However, this problem starts to show on boot-up again recently, and sometimes I could logon to the Vista but it seemed that "Shift" is shortcut under Vista. Now I uninstall the whole keyboard and use an USB keyboard, then the problem is gone. Can I conclude that the problem is my faulty original T400 keyboard?
Thanks!
Moderator Note; corrected formating problem
Message Edited by andyP on 06-17-2009 12:01 AM

Hello,
Even myself are facing same error message while switch on(power on) laptop
using ibml lenovo thinkpad edge series
error
0210 : stuck key 36
press <F1> to setup...
nothing happen here none of the keys are working when this message popup except direct power off.
possible if anybody share such experience solution.
highly grateful.
regds
wasi

IT 0210 Message Control

I want to change the warning message: 5U265 (number of exmptns/addl withholding should be blank if exempt is selected) to an error message- hard stop.
Where in customizing is the message control that will let me make that change?
Thanks,
Joyce

Hi Joyce,
You may check if the BADI 'PC10_PAY0007' is implemeted in your system. If this is the case, change the code in method
VALIDATE_AFTER_INPUT to make the check as error ('E').
           c_msgid = '5U'.
           c_msgty = 'W'. "<=change to 'E'.
           c_msgno = '265'.
In addition, if you have decoupled framework activated for IT 0210, then find the class name from table V_T582ITVCLAS and check the code in method SPECIFIC_COMPUTATIONS_EXIND, or similar methods of this class. If the same message is issued there, then copy a new class with then corresponding code change to 'E'.
Regards,
Li

PA 30 does not Trigger 0210 Withholding Info W4/W5 US for FED

HI Seniors,
I have this problem of 0210 it triggers twice for State & Federal 1 by 1 in PA 40 but if i want to maintain 0210 Withholding Info W4/W5 US in PA30 it triggers once for state not for federal,sytem just takes me back to the main PA30 screen,can any body guide me on this matter.
Thanks.
Edited by: srssaphr09 on Apr 5, 2011 10:37 PM

Hi Lata,
Thanks for the update but would like to put up one thing that as the Configuration is for US i think the MOLGA should be 10,and i have to configure the Dynamics actions 0210-stae & Fed For 0006.
& in whih column i have to configure this.
1. Change Resedence tax area for Tax Chamges
2. * US PCS CREATE RESIDENT TAX AREA FOR ADDR CHANGES
How the sequence should be
STY    Field Name   FC   NO     S    Variable function apart.
6               1             4     103    *     ADDRESS TEST
6               1             4     104    P    P0001-MOLGA='40'
6               1             4     105    I     INS,0210,001 ,,,(P0006-BEGDA),(P0006-ENDDA)
Please update.
Edited by: srssaphr09 on Apr 7, 2011 1:11 PM

IT 0210 - Withholding Info W4/W5 US - limit employees to one state tax!!

Hi,
is there a way to limit employees not able to enter more than One STATE for an employee in IT 0210 - Withholding Info W4/W5 US? In other words, we should alllow employees to enter FED and one STATE Tax info in IT0210. Can it be done?
I couldnt achieve the above using time constraint. Is there any other way, can someone please share some insight?
Thanks for your time and repsonse!
--Raj

Yes, you can achieve this through dynamic action but you need to be sure of the scenarios. For example, if state on IT6 changes or if you have relocation/address change action in place, you can present IT210 to delimit (first) and then create. I've done this before and it works fine. No need to change time contraints.
If you want it explicitly, you will need PAI user exit as Ted has suggested. Consult your technical folks on that.
Donnie

IT 0210

Similar Messages

Maybe you are looking for