IT 580 : Screen Details not visible

While creating data in IT580 ( Previous Employment Tax Details).. The screen is not visible completely.
Only following feields are visible :
Pers. No.
Name
Category
Location
From & To date
Previous Employment Tax Details :
Leave Encahsment Exemption Amount
Gratuity Exemption
VRS Exemption
No. of LTA Exempt
LTA carried forward
The screen is blank other than than the above mentioned, no details are visible.
Could anyone resolve this query pls ???
Rgds.. Pushkaraj

Hello Pushkaraj,
Can u plz check if hiring date of the employee is begin date of the Financial year. If this is the case then only following fields will be applicable for the Previous Employment Tax Details :
1. Leave Encahsment Exemption Amount
2. Gratuity Exemption
3. VRS Exemption
4. No. of LTA Exempt
5. LTA carried forward
this is because only thess exemptions can be adjusted/ carried forward to the current year from the previous year. Other components like previous gross salary , PF, Ptax, Income tax etc are not applicable for the cross financial year adjustemnt in such a case.
U can test the same with a hiring date other than the begin date of the financial year. u will get the whole screen.
Check and let me know if still its nt clear.
Regards,
Praveen

Similar Messages

Full Screen is not visible

Hi Experts,
When i execute any web dynpro application(e.g Leave Approval) in browser(IE6), the screen is not visible fully that's why i can't click on submit button in order to approve the req.
work around for this issue is F11. by pressing F11 full screen comes up but I need permanent Solution. Kindly help me.
I appreciate any suggestions.
Regards
Manish

Hi Manish
Are you running the application directly from the wd or you have created the iview for that application?
If you have created an iview for your application, there might b the reason that you forgot to set the open page property as full page. If this is the case, do it.
If you are running your application from wd itself, and not able to see the complete view - try this
1. try to run in other IE versions. But, tell you something, 6 is the best to run all the applications.
2. check the component used by you in the application & there sizes. Sometimes, problem comes that you outerframe size is less as compared to inner. This will result in the same situation.
Just try this and tell me if something worked out for you. Thanks.
Best Regards
Chander Kararia
If your problem is solved, close the thread marking answered.

Header screen is not visible in VA21

Hi all,
I added new tab in Header Details in quotation screen VA21. It is working fine.
My problem is:
Case1: Now currently I am in custom tab which I have created. If I click on back button, it is coming to main screen. Now immediately, If I press Header details button, it is showing empty screen.
Case2: When I did same process for any standard tab, it is showing header details screen.
I have done some cofigurations in the transaction VFBS. I dont know why the header screen details not appearing in case1.
Please share you ideas to resolve this issue.
Thanks inadvance.

For portal you have to configure/create Qatar specific detail screen.
Have a look at this wiki:Exciting Enhacements to ESS Personal Information Profile in Enhancement pack 6
Dummies Guide: Configuring Overview Screens in Personal Profile
Summary of configuration options in ESS Personal Information scenario
ESS On EhP6 - Personal Profile - BizCard Contro... | SCN

Approver Details Not Visible After Changing the Approval Process

Hi Gurus,
This expense report belongs to an open approval task when an approval process has ended its validity date.
After a new approval process is activated, all pending approval tasks experience the issue of approver details not showing.
In order to reproduce following steps need to be done :
1. Deactivate the current approval process and activate the new approval process.
2. When the status of the recently deactivated approval process is "Ended With Open Tasks", go to the "Show Open Approval Tasks" to
see the open approval tasks.
3 Check the Cost Assignment area for expense report which is in the open approval tasks.
3. Approver Details are available.
4. The approver sees the expense report on his/her approval list.
Once the approver approves, it doesn't go out of his/her approval list and the expense report is still pending for approval.
To determine if the expense report has no other pending approval from anyone else, there should be the approver
details but the issue is it doesn't show up.
The expense report is also stuck on the approver's approval list even after approving.
Workaround provided to the Customer: Recall the ER and submit again for approval.
But as per customer there should be a background job to refresh the expense report to reflect the approval details.
And issue should not occur as explained on the point 4.
Kindly suggest if anything is possible to improve the system behavior.
Regards,
Rahul Mishra

Hi Rahul,
Although we have a workaround, I believe a permanent solution has to be implemented.
In cases when an expense report has more than one approver (for example there are 4 approvers) and the 3 approvers had already approved, I think it will not be good to recall the expense report and resubmit because the traveler will have to seek for approval again from all the approvers.
Regards,
Catherine Mapili

Selection Screen is not visible when i run tcode S_ALR_87013611

Hello all,
whenever i run T-code S_ALR_87013611.The report is directly executed . it does not stop at selection screen as i want to change the parameters in the screen.but the selection screen is not coming. as the report is generated on the basis of previous data selected.
Please let me know is there any user setting through which this setting can be changed.
Thanks
Naveen

Are you using Webgui / portal or SAPgui
Regards
Subodh

Macbook, "save document" screen is not visible on left side and I can't reach the buttons to shrink it

I have a mac book with windows platform. When I attempt to save a document my save screen is not positioned for me to see the whole thing. I would resize it, but the resize arrows are off the screen with the entire left side of the window. How can I get the left side back into view or how can I shrink it so the whole screen fits in the window? Help.

I found a solution that allows me to just see the "Cancel" and "Save" buttons and, more importantly, allowed me to get at the options screen to attach a password.
With the Save Screen open, I pressed the yellow "Iconize" button in the top left. I then "uniconized" the window by clicking on the icon in the dock and the save screen had reduced in size just enough for me to see everything I needed.
Sadly, I still couldn't get at the resize handles at the bottom right.
Hope this helps.

SAP GUI issues - VA41 - additonal data B screen is not visible completly

Hello everyone,
Tthere was a problem reported by one of our sales users that in VA41/VA42 screen, there are different tables available, there is a tab "Additional data B" for one user only half of the tab is visible in the presentation server. The user is not able to scroll right/left and couldn't do any data entry on that screen.
Any one has any clue why this issue is only for this user.
The GUI version and patch : 7.10 with Patch level 3 ( File version : 7100.1.3.1029)
When we ask the user to try logging with his id in another PC, the table is visible completely. Both the desktop' GUI version is all the same. No other user is having this issue except one user. Hence I think it is related to GUI issue.
If anyone faced this issue before, please suggest a resolution/workaround
Please don't suggest for higher level patch, other PC's with the same level patch is working fine.
Rajan

We had a similar issue with a different t-code. The user also had a problem with Outlook and the CRM system we use. We eventually decided thet athe user's profile information was corrupted.
We deleted the user's windows profile on the particular PC and then created it again. This fixed the problem - probably not the best answer, but it worked.

Country Specfic screen is not visible in ESS

Hi,
I have configured personal profile. Employee belong to Qatar country grouping and it should display country specfic screen like for IT0002,IT0021.
But I am not able to see country specfic screen .
Regards,
Vijay

For portal you have to configure/create Qatar specific detail screen.
Have a look at this wiki:Exciting Enhacements to ESS Personal Information Profile in Enhancement pack 6
Dummies Guide: Configuring Overview Screens in Personal Profile
Summary of configuration options in ESS Personal Information scenario
ESS On EhP6 - Personal Profile - BizCard Contro... | SCN

Screen is not visible

when my iPod is on you can barely see what is on the screen. is this just from old age? or is it something that can be fixed. its progressed to the point that i have to guess what is written on the screen because the writing is too light to read

I had a similar problem! With me, on the iMovie screen some parts are visible and others are not, like the projects - however, if I move over the 'grey' invisible area's the preview window shows the images. Yet, I cannot see or select my projects anymore.
Unfortunately I'm still searching for a solution (other than reinstalling OS X altogether again... and having to do that over and over again!).
Have you found a fix yet? Or anyone?
Grts, Jarno

Screen is not visible (blank) on Tecra A8-EZ8413

I have a Toshiba Tecra A8-EZ8413 laptop.
I have no screen display. As far as I can tell the computer is booting up okay, there is just no visible display.
I was able to switch the hard drive into another Toshiba Tecra A8-EZ8413 laptop and it works fine.
Can anyone help me with this issue? Thanks.

Hi
> I was able to switch the hard drive into another Toshiba Tecra A8-EZ8413 laptop and it works fine.
So HDD is ok.
The question is if its a display or graphic issue
You should connect the external monitor to the notebook and should try to power up.
If the notebook would boot up properly (as you have suggested in your post above) then you should see something on second screen.
But if you will not see anything then an serious hardware problem (possibly GPU) causes this issue

Screen is not Visible after make it invisible

I maked the screen fields together and formed group1and dinamically changed to invisible by setting
loop at screen.
if screen-GROUP1 = 'INB'.
screen-Invisible = 1 .
modify screen.
endif.
endloop.
But when i tried to make visible the group1 its not showing ..please provide the valued information
regards
sarath

How are you making the group1 fields visible? I think you need to have a condition around the part of the code that makes fields invisible otherwise they will always be made invisible:
loop at screen.
if screen-GROUP1 = 'INB'.
    if <some condition where fields must be made invisible>
      screen-Invisible = 1 .
      modify screen.
    endif.
endif.
endloop.

The new itunes overfills my window. When I try to move it to the left so that I can use the slide bar on the right, part of the left side of screen is not visible. How can I fix this, please.

The new itunes overfills the window on my desktop ( windows 7). When I move it to the left so that I can access the slidebar on the right, part of the left side of the screen then disappears. How do I correct this?

The problem of tracks becoming de-linked between iTunes and the music files in your iTunes music folder happens for different reasons - this seems to come up fairly commonly in this forum.
The solution can be to locate each song in the iTunes library, as you mentioned - or, but wait, before I get to that...
trouble finding the original track in your iTunes music folder? maybe look for it under compilations, or if not using the 'group compilations preference' then look in the folder under the songs artist name, but what song artist name iTunes uses depends on what you have in the metedata tag spot for album artist or song artist. Any varyation in artist name spelling, in the menu item 'get info' metadata for any selected individual track will cause iTunes to create that as a separate artist folder in the library, even names like 'various' or any difference at all (even the word 'the' can change where in your iTunes music folder a track gets placed by iTunes). You can try to use the finder function of find file (finder munu item outside of iTunes) to locate hard to find items.
Back to how to re-link any de-linked tracks .
There may be scripts that can help re-link de-linked music files - or, at least provide you a list of such files, Scripts are easy to install and use...
at Dougs Scripts, there is one called iTunes Track CPR that might work
http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
or, if you just want a list of de-linked tracks, go to
http://dougscripts.com/itunes/
and find the script called List MIA's, this will create a text file listing all de-linked tracks
if you review the thread at
https://discussions.apple.com/thread/3633708
also the thread at
https://discussions.apple.com/message/17513078#17513078
you may find more insight into dealing with this kind of issue there, although some of that thread may not apply to your case, aspects of it might help.
Good luck.

Bank details not visible in R3 after syndicating from MDM

I have used standard map debmdm06 to syndicate Customer records from MDM(SP5) to R3.The IDoc seems to get posted,but the bank details were not appearing in R3.
Can anybody help me out in this issue.

Hi,
This could happen due to multiple reasons. Would suggest to check folllowing:
1. Check the xml file that is getting generated after syndication. You can take it from Outbound/Archive folder. Check if the bank details are appearing in the xml file.
2. If yes, that means MDM is syndicating data properly. If no check syndication map.
3. If yes for pt 2, Check in coming Idoc from we02. Does it have the bank details? If not, then if you have used XI, the field mapping would be inncorrect.
I guess, the issue would be in xml getting generated.
Regards,
Ketan
PS: Plz award points if reply is useful.

Customer Visible in Sales Order Screen.But not visible in the customer Web form in R12

Hi all,
I have created a customer of organization type using the customer API.I have also created a location and a customer account and account site as well
The created values are loaded into the HZ tables and are visible in the tables such as hz_parties, hz_party_sites, hz_party_sits and so on.
But the issue is that I cannot find the customer in the customer web form in the receivables.but at the same time it is visible in the sales order screen in the order management.
so please, someone help me resolve this issue.
Thanks and Regards,
Bhaskar.

Hi Kate,
Could you please share your form with me ([email protected]) so that I can investigate and correct this problem? Instructions on sharing can be found here:
http://forums.adobe.com/docs/DOC-2462
Thanks,
Brian

My iphone screen is not visible - i can hear texts and calls, but cannot access them

I have an iphone 4s and I am not able to see the screen - it's blank, however, I can hear when I receive a text and call.

no you cant

IT 580 : Screen Details not visible

Similar Messages

Maybe you are looking for