It asks for drivers In the middle of Win7 installation?
Using a White MacBook (the one that just before Polycarbonate edition) 10.6.2 OS X Boot Camp, every software is up to date, made sure of it.
I burn my Windows 7 Pro (ISO image, downloaded from MSDN's directly), finished partitioning in Boot Camp, went to the Win installation, picked up the right setup from timing and keyboard writing... Next thing it asks to locate the drivers, where the heck I'm supposed to find them now? I figured I should eject the Win disc now and insert one of the discs that came with the MB, I can't eject a thing, it just doesn't eject.
I'm stuck as you can see and I don't know how to fix this.
Please help.
Regards,
If this is any help (a screenshot): http://goo.gl/5uvU
And no, I can't skip it and deal with it later, its either install the drivers of somehow or just drop the whole installation.
Similar Messages
-
Software gets stuck for days in the middle of work. Force quit doesn't solve the problem
Final cut pro gets stuck for days in the middle of work. Force quit doesn't solve the problem. It happens every once in a while.
avoid double posts! read my reply in your other thread .............
-
i was charged for a movie that never was downloaded, i asked for it but the conection was too slow and I never was able to have the movie that i asked for...how can i get it without being charged again, who could remove the chage from my Crecit card?
You may not be able to get a refund, since the terms of sale for the iTunes Store state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
http://www.apple.com/support/itunes/contact.html
It's possible they'll make an exception for you, particularly if the problem was on their end preventing the movie from downloading in a reasonable time.
Good luck. -
My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?
Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful. -
I want to download free apps for iphone 4s but when downloading it is asking for payment info. the application are free but why it is asking for purchase details...please help me...
In iTunes, click "Store", sign in with your Apple I.D. After singing in, click "Store" again, select "View my Account", re-enter your password and your account info will be displayed.
Click "Edit" in front of "payment information" and select "None" -
Hey. I have recently made an update on my daughters iMac, particularly the update OS X 10.9.4, when finished, its still asking for update and the same update stills remarked as ready in the apple update menu and remarked as 1 to go at the App store app. Why doesn't stop asking for update when its done like 5 times or more? Thanks for taking your time!
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later. -
I have an iMac OS X ver 10.7.5. Processor speed is 3.06 GHz intel core i3, and the memory is 4 GB 1333 MHz RAM. My online banking app is being updated and requires OS ver 10.8 or newer. When I ask for available updates, the system says there are none available. How can I update my system to ver 10.8 or newer to accommodate the new banking app?
You can update directly to Yosemite (for free) through the App Store (this is 10.10). Make sure your existing applications will run on this OS.
If you wish to stay at 10.8, you can order this through the online Apple Store (it's $20), and they will email you a redemption code to be used on the App Store.
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
Matt -
I was trying to software update i phone 3g, when software downloaded an install, one unknown error has occurred, and asking for restore, at the same time i am trying to re-store again an error of 1015, happen, what i should do, for solution,
please advise me,
best regards,
Ahmedtry to edit your host file ang delete any line that contain gs.apple.com
-
Apple ID pops up asking for password all the time
Apple ID pops up asking for password all the time which I type in, I know correclty, however a screen afterwards pops up saying 'password incorrect'. I've had to change my password continuously as whenever I try to sign in through the Apple website it too tells me my password is incorrect. I'm worried that my Apple ID is being hacked or there is some glitch or virus occuring. What should I do? Also lately there has been a similar occurence with Game Center, whereby it will pop up in a few of mu games every 2-5 minutes, I don't use Game Centre but my sister does. I disable Game centre, but after 2 or so minute it will pop up again, not sure if this is happening due to the password issue. Does anyone have any ideas of what it happening or how I could fix the issue. (this is through my Ipod touch iOS 6.1.3)
I'm not entirely sure from your description exactly what is going on. However, if you are being asked for the password for your Apple ID (be sure it's the right one) and the password that should work is being rejected, one strong possibility is that someone has hacked your Apple ID. They may do this in order to purchase apps, music, movies, etc, on your credit, which can then be used (though not updated) even after you change your password. Check your purchase history for any unusual purchases. Change your password (which may require a call to Apple if you no longer know the current password) and consider enabling two-factor authentication to protect against any future unauthorized changes to your Apple ID. See:
Apple introduces two-factor authentication -
I’m giving my ipad to my sister and I had the icloud account changed. I have added new ID and deleted the old one. However when updating and downloading apps, it still asks for password to the previous account. Does anyone know how to fix this? Thanks very much!
Maybe you should set it up as new device again:
How to back up your data and set up as a new device
Apps are tied to the Apple ID they were bought with and can not be shared with other devices that have a different Apple ID. -
Why does a pop up screen ask me to extract the image using Lightroom Installer, when all I want to d
Why does a pop up screen ask me to extract the image using Lightroom Installer, when all I want to do is view it ?
My local computer shop solved the problem. Apparently when you download cloud it changes a lot of settings.
So second issue.
Why do I now get asked to burn to disc rather than saving to my hard drive when I want to export from Lightroom ? -
Hello...
I am new to the Palm (~1mo.) but I was using hotsync with my old laptop which had Windows XP and was not experiencing any real problems. That computer is going bye-bye, I bought an HP with the Vista OS and I followed the directions on downloading the Download Palm Desktop by ACCESS 6.2 from the website but now I can not get my device to sync-- The Desktop computer asks for the appropriate drivers. I tried searching online, on the disk that came with the smartphone and even reinstalling a couple times and everything is dead in the water...
Anyone able to help me out on this?
Is there an additional patch of some sort to download?
Post relates to: Palm m515Just in case it is not clear... that post was made after I bought the bluetooth adapter and tried following the advice provided in the Vista 64 Hotsync solution found! post. Again-- my statement of not working is for the following reasons:
1) my PC tells me that the sychronization completed with errors.
2) when I look at the log that the Backup sychronization aborted.
3) It almost invariably tells me that it Failed to backup 1 file(s) and that file is "NetworkProfiles2" through a "Protocol Error: Unknown error. (6410)"
4) many of my contacts (over half) duplicate during this synchronization.
5) many of my appointments (over half) duplicate during this synchronization.
The information about creating a virtual serial port on my PC comes from my actual palm itself. The palm info is in the HotSynch verbage and it tells me to contact my computer manufacturer. In doing so however they have no idea how to do this and Palm does not either. I am still working with HP on trying to resolve that part of it but I am thinking from the hours of research that Palm wants me to create another COM port but again the help I am finding on this is beyond my pay grade so to speak... you can check out the following link and try to help me if you like:
http://msdn.microsoft.com/en-us/library/ms885792.aspx
So... any ideas my friend? It appears that some Vista 64-bit users are having success with a bluetooth synch but I have tried emailing those that claim to have been able to do this with no luck. I am not having any luck (I hope my outline above is clearer)-- and no one has seemed to had any luck recently.
I would love to make this work-- I bought this phone for this functionality.
Post relates to: Palm m515
Post relates to: Palm m515 -
Vista OS doesn't recognize I-phone- asks for drivers
I did the 2.2 upgrade during syncing-- phone and i-tunes froze. Now I-phone (1st generation) has flashing sync symbol; reset doesn't do anything; tried to restore, but when connecting phone to computer I get the vista 'new hardware found' message, asking for location of drivers for 'unknown object'.
I did a system restore on the computer to before the sync, hoping to 'reinstall the drivers'-- does an I-phone even HAVE drivers? I can't find a file on my computer with them---
Any other ideas?Wow-- excellent! I directed the windows device manager to the folders mentioned in the article at the link you provided, and now the laptop recognizes the phone. I just did the 'restore' operation, and the used the back-up to re-install everything (I'm glad I backed up-- I almost skipped it!).
Thanks for your help!
JJ -
I have two seperate itunes accounts on two seperate devices and i can not make an itunes purchase on either one. When signing into the account it ask for the answer to security questions. I have NEVER answered a security question for these accounts. Each time it is a different set of questions. This has only happend since the original devices have been replaced/upgraded. How do I fix this? There is money in each account and both have recieved itunes giftcards for christmas that they are unable to use!
sailsalot wrote:
I have a new ipad and have used the community to answer questions for myself. Your help has been great! I don't know how you got my sailsalot name from my Skype account but I signed in with you as "gags76" and got help with my new ipad. I discovered I used a different Apple id and password on my ipad from my computer (imac) and changed that. My e-mail is Could you email me if there is something I should do at my end. I have to use itunes to sync with my ipad so I have been going back and forth between the two. Should I sign in with my proper Apple id on my ipad?
Yes -
I want to make a program that will ask for the ID of the testing machine the first time the program is running, then will never ask for it. I'm using Labview 6.0
Hi
There are a Couple of methods you can use for this.
Method 1 -
You can create an ini file and save a boolean Key "First Instance" as True. Now In your Program you read this Key, If it is True then you can show your ID Dialog VI.If False do not run the VI. At the Conclusion of Id Dialog you can update this registry enrty to False. So In effect you have created One time Event. In fact you can save ID as another Config entry.
The Drawback and advantage is that such an INI file can be edited by someone moderately knowledgeable about the Program
Method 2
Use Unitialized Shift Register in A while Loop. Please see LV2 style Globals entry under this forum. You can read and write to this Variable and it retains the Value it last had within it.
You can read
this Global the Very first time and say if it true you display your ID Vi. If False you dont. When you display your ID Vi you can Update your Global Like Before.
If you need Example Let me Know.
Good Luck
Mache!!
Good Luck!
Mache
Maybe you are looking for
-
How to display the NULL records by multiple XMLTABLE()
First, let me provide the testing data of INSERT and CREATE TABLE sql: create table xml_t2 (xml_raw XMLTYPE);insert sql, a bit long.....just copy and paste then run it will be OK! the system warns: Your message exceeds the maximum length of 30000 cha
-
BAPI_GOODSMVT_CREATE for movement type 161, issues in PO creation
Hello Gurus, I am using movement type 161 with BAPI_GOODSMVT_CREATE in order creating a vendor PO based on the goods receipt posted with the BAPI. It works fine, nevertheless due to business requirements, I need to apply the following changes: - in S
-
One iPad2 is of my daughter the other is mine I put the same Game Center account, but when I installed the game app in my ipad2 it start in level 1!! when I check my achievements in GC I have them 24 of 61 but not in my level 30 but in level 1... He
-
PF attribute modification in Access Policy for existing users.
Hi Guys, I have an access policy for provisioning a resource. Suppose if I make some changes for the process form attribute value inside the access policy,How can I have the same attribute value reflected in the process form of users who are already
-
Table where Partner function related to any particular ticket is stored
Hi All, Can Anybody tell me name of the table where Partner function related to any particular ticket is stored. Thanks in Advance Regards, Amit