It becomes ... S l o w

Sometimes while working, the system become extremelly slow! Doing simple tasks, surfing the net with firefox, moving files, etc, etc, nothing strange and I noticed that Finder is the problem in some way. After a while with the system very slow, I got kill Finder and seems like all back to normal... any ideas what is the problem here?
Thanks!

The hardware test is on your system install disk 1. Read the disc lable on which key to hold down when booting to the hardware test as it is not the C key.
Afterwards, reboot the same disc by holding down the C key & run the repair disk option. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk. When done, click Repair Permissions. When done, restart your computer.

Similar Messages

I am attempting to plug my mac into my tv. I am using the mini dvi to s video adapter. When I plug it in, the display goes all wonky and becomes stretched and enlarged.

When I attempt to connect my mac to the monitor using a mini dvi to s video adapter the display becomes enlarged and stretched. I cannot seem to fix this using the system preferences or the quick keys that allow you to zoom in on the display. Any suggestions?

I am using MAC OSx 10.5.8 (9L31a) as my operation system. The TV says "No signal. Check connected device's power, cable connection and source selection." Seems to me that that goes in hand with what the Samsung tech said about the Mac needing to be forces to use the external display. But how do I do that?

Hp LaserJet P3015 printer "waiting for printer to become available" message

Hello All,
I have searched through many message boards about this issue (some steaming back to as far as 2009) and I have yet to find a solution that has worked for me.
Background of situation:
In my office we have a dozen iMacs and Networked hp LaserJet P3015 printers. Most work perfectly fine with out issue. We are currently running 10.8.4 OS. There are a few issues that seem to be unique to users or types of iMacs. 1) Three brand new iMacs (the skinny ones that come without the CD drives) where showing a message prompting for the "printer operator group". I have that setting turned off but reguardless I added the user accounts to the "printer operator group" as well as the "printer admin group". After I did that the users started to recieve the message "waiting for printer to become avaible". When this message appears it never printers (I left it for a 20 minute period to no avail). I have tried a whole host of fixes with short term success but the issue keeps reoccuring. Here is a list of fixes I have tried:
What I have tried
1) I plugged the iMac directly into the printer via USB cable to install the drivers locally
2) I added the user to the printer operator group and the printer admin group
3) I checked all settings on both the printer and computer
4) I have removed and re-added the printer several ways (from the network and directly via UBS cable)
5) I checked the Ethernet connection to the printer (all are fine) (also eliminated the need for it by directly plugging her in via USB cable)
6) I have "power" shut down the printer
7) I restarted the printer settings on the network to eliminate any lingering issues
8) Made sure the software is up to date (which according to some message boards is what the problem is)
9) I have replaced both the actual Computer and Printer (with another brand new iMac), while additionally creating a new user account to eliminate hardware and faulty user settings as the culprit, as well as plugged the printer directly into the computer and removed it from the network.
10) I prayed to the IT gods
Other Notes:
I did see a solution from a message board that said to delete all "hp_" files in system/library/extensions and then directly plug the printer into the computer to install the drivers that way (which he said worked) but the guys also said that if he ran software update then the issue would re-occur. This seems to be counter productive as I like to keep all software up to date
What I have noticed:
- The issue seems to affect the newer iMacs in my office more then the older machines despite everyone running the same OS version
Thank you all so much in adavanced for your time reading my post. The issue has been extremely frustrating for both me and the end users and I appreaciate any help that anyone can provide (even if its just pointing me in the direction of another message board)
- Chris

You have not mentioned it but based on some of the things that you have said, I would assume that the Mac's are bound to a domain. So, for one of these Mac's, if you logged on locally and then created a print queue to the network printer, do you get the same message?

Keyboard and trackpad freeze and randomly become unresponsive

I've got a MacBook Pro (15-inch Early 2011) running Mac OS X 10.8.2.
Since a few weeks ago at random intervals my keyboard and trackpad become permanently unresponsive. I don't recall any particular cause or change that would have caused this to start happening.
What happens is that the trackpad and keyboard will stop functioning completely. The computer, display etc. would continue to function properly:
The clock keeps ticking.
If music were playing it would continue etc.
Internet connectivity (via an ethernet cable or WiFi) continues to work as well (a download will continue, and even resume if I disconnect and reconnect the ethernet cable).
Presssing the power button will bring up the shutdown dialog as usual (but I can't use it, obviously, so a forced shutdown needs to be performed instead by holding down the power button longer).
.. but the keyboard and trackpad are rendered inoperable, as if they were no longer connected.
I've made no progress in finding out what could possibly be the cause of this. A few observations:
It has never happened while not using the keyboard (e.g. watch a DVD with TV series for a few hours, and afterwards the keyboard would always be fine).
It always happens while actively typing (e.g. while in the middle of replying to an e-mail).
It is not a temporary problem, the keyboard and trackpad will not become responsive again after some time (the computer isn't particulary occupied with calculating something big, no beachball and no busy mechanical noises).
It does not happen progessively. It works fine and snappy one second, and I'm touching a dead keyboard a split second later.
I tried connecting a USB keyboard but that doesn't seem to work either (I'm mentioning this since some of the linked threads below close with that as a solution).
Possibly related (although I haven't found anything in these threads):
Keyboard causes trackpad to not function properly
Keyboard and trackpack freeze
Keyboard and Trackpad Unresponsive
MacBook Pro Keyboard & TrackPad freeze! Totally Unresponsive!
MacBook Pro inbuilt Keyboard and Trackpad freeze when not connected to bluetooth devices?
I've crawled through some log files in /var/log (via the shell and through Console.app) and found a couple things that may be relevant, although they seem unrelated. Etiher way, I was surprised by what I found. All sorts of errors with regards to Bluetooth and USB stuff. I'm not aware of using either. I haven't used bluetooth in years and though I sometimes charge an iPod by USB, I haven't had any problems with that, and this keyboard/trackpad freeze has also happened on sessions where I started the laptop and never even touch the USB ports in the time leading up to the freeze.
Sample log from when it happened. It last happened at 21:04:xx:
Jan 14 20:18:39 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x141-192.168.178.13:0!
Jan 14 20:23:49 KrinkleMac.local lsboxd[2155]: @AE relay 4755524c:4755524c
Jan 14 20:26:14 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x142-192.168.178.13:0!
Jan 14 20:29:11 KrinkleMac.local WindowServer[80]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
Jan 14 20:29:16 KrinkleMac.local lsboxd[2155]: @AE relay 4755524c:4755524c
Jan 14 20:30:13 KrinkleMac.local CalendarAgent[6449]: Unexpected EOF, returning last token as fallback
Jan 14 20:30:43 --- last message repeated 1 time ---
Jan 14 20:33:24 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x143-192.168.178.13:0!
Jan 14 20:41:09 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x144-192.168.178.13:0!
Jan 14 20:42:43 KrinkleMac.local mtmd[46]: Set snapshot time: 2013-01-14 20:42:45 +0100 (current time: 2013-01-14 20:42:43 +0100)
Jan 14 20:42:43 KrinkleMac kernel[0]: nspace-handler-set-snapshot-time: 1358192565
Jan 14 20:43:14 --- last message repeated 10 times ---
Jan 14 20:43:28 KrinkleMac.local AddressBookSourceSync[6580]: *** -[IADomainCache init]: IA domains cache is out of date.
Jan 14 20:45:12 KrinkleMac.local CalendarAgent[6449]: Unexpected EOF, returning last token as fallback
Jan 14 20:48:09 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x145-192.168.178.13:0!
Jan 14 20:55:54 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x146-192.168.178.13:0!
Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:01:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:01:13 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:01:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:01:13 KrinkleMac.local blued[6615]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
Jan 14 21:01:14 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:01:39 KrinkleMac kernel[0]: USBF:          145183.427          AppleUSBHubPort[0xffffff803c3d2600]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:01:39 KrinkleMac kernel[0]: USBF:          145183.722          IOUSBCompositeDriver[0xffffff803ae3be00](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
Jan 14 21:01:41 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:01:41 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:01:41 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:01:41 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:01:41 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:01:59 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:01:59 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:01:59 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:01:59 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:01:59 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:02 KrinkleMac kernel[0]: USBF:          145206.333          AppleUSBHub[0xffffff80476a9000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, retrying
Jan 14 21:02:02 KrinkleMac kernel[0]: USBF:          145206.634          AppleUSBHub[0xffffff80476a9000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, after retry, resetting the port (1)
Jan 14 21:02:12 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:02:12 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:02:12 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:02:12 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:02:12 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:12 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
Jan 14 21:02:12 KrinkleMac kernel[0]: USBF:          145216.648          AppleUSBHubPort[0xffffff803a385000]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
Jan 14 21:02:12 KrinkleMac kernel[0]: USBF:          145216.649          AppleUSBHubPort[0xffffff8038a3ba00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:02:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:02:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:02:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:02:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:02:13 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:13 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
Jan 14 21:02:13 KrinkleMac kernel[0]: E:[AppleBluetoothHCIControllerUSBTransport]WARNING !!!! [AppleBluetoothHCIControllerUSBTransport::DeviceRequestCompleteHandler] error 0xe00002ed (kIOReturnNotResponding)
Jan 14 21:02:13 KrinkleMac kernel[0]: USBF:          145217.575          AppleUSBHubPort[0xffffff80398bf400]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing getting port status (2)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.529          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.530          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.530          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.123          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.123          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.125          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:02:22 KrinkleMac kernel[0]: USBF:          145226.307          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:02:22 KrinkleMac kernel[0]: USBF:          145226.373          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.196          AppleUSBHubPort[0xffffff8039fd0c00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.196          USBF:          145228.196          AppleUSBHubPort[0xffffff803a261e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing getting port status (2)AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff803a261e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff8039fd0c00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
Jan 14 21:02:25 KrinkleMac kernel[0]: USBF:          145229.331          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:02:25 KrinkleMac kernel[0]: USBF:          145229.766          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:02:26 KrinkleMac kernel[0]: USBF:          145230.963          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:02:26 KrinkleMac kernel[0]: USBF:          145230.963          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:02:28 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:02:28 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:02:28 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:02:28 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:02:28 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:38 KrinkleMac kernel[0]: USBF:          145242.843          AppleUSBHub[0xffffff803c64b000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, retrying
Jan 14 21:02:38 KrinkleMac kernel[0]: USBF:          145243.145          AppleUSBHub[0xffffff803c64b000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, after retry, resetting the port (1)
Jan 14 21:02:40 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:02:40 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:02:40 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:02:40 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:02:40 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:47 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:02:47 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:02:47 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:02:47 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:02:47 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:54 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x147-192.168.178.13:0!
Jan 14 21:03:03 KrinkleMac kernel[0]: BRCM2070 Hub::terminate(kIOServiceSynchronous) timeout
Jan 14 21:03:04 KrinkleMac kernel[0]: USBF:          145268.325          AppleUSBHubPort[0xffffff8039bc4c00]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:03:20 KrinkleMac kernel[0]: USBF:          145285.139          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:03:21 KrinkleMac kernel[0]: USBF:          145285.572          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:03:22 KrinkleMac kernel[0]: USBF:          145286.868          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:03:23 KrinkleMac kernel[0]: USBF:          145288.132          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:03:24 KrinkleMac kernel[0]: USBF:          145288.882          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:03:25 KrinkleMac kernel[0]: USBF:          145289.385          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.455          AppleUSBHubPort[0xffffff803a24e400]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.456          AppleUSBHubPort[0xffffff8038a96200]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.492          AppleUSBHubPort[0xffffff803a9a6600]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.483          AppleUSBHubPort[0xffffff803a24e400]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.703          IOUSBCompositeDriver[0xffffff803b7c3700](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.703          IOUSBCompositeDriver[0xffffff803c98b400](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
Jan 14 21:04:09 KrinkleMac kernel[0]: USBF:          145333.634          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:09 KrinkleMac kernel[0]: USBF:          145334. 67          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:10 KrinkleMac kernel[0]: USBF:          145334.916          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:10 KrinkleMac kernel[0]: USBF:          145335.347          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:16 KrinkleMac kernel[0]: USBF:          145340.675          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:16 KrinkleMac kernel[0]: USBF:          145341.108          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:18 KrinkleMac kernel[0]: USBF:          145343.300          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:19 KrinkleMac kernel[0]: USBF:          145343.803          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:20 KrinkleMac kernel[0]: USBF:          145344.644          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:23 KrinkleMac kernel[0]: USBF:          145348. 42          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:24 KrinkleMac kernel[0]: USBF:          145348.868          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:24 KrinkleMac kernel[0]: USBF:          145349.299          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily gave up enumerating a USB device after 10 retries. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:42 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:04:42 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:04:42 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:04:42 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:04:44 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
Jan 14 21:05:20 localhost bootlog[0]: BOOT_TIME 1358193920 0
Jan 14 21:05:26 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Jan 14 21:05:26 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
Jan 14 21:05:41 localhost com.apple.launchd[1] (com.apple.automountd): Unknown key for boolean: NSSupportsSuddenTermination
Jan 14 21:05:41 localhost kernel[0]: PMAP: PCID enabled
Jan 14 21:05:41 localhost kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64

I've recorded the logs several times now and although a lot is variable (likely unrelated errors and crap). The following 5 lines consistently occur right before the freeze:
1/18/13 11:06:10.000 PM kernel[0]: IOBluetoothUSBDFU::probe
1/18/13 11:06:10.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
1/18/13 11:06:10.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
1/18/13 11:06:10.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
1/18/13 11:06:24.000 PM kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
1/18/13 11:07:22.000 PM bootlog[0]: BOOT_TIME 1358546842 0
1/18/13 11:29:27.000 PM kernel[0]: IOBluetoothUSBDFU::probe
1/18/13 11:29:27.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
1/18/13 11:29:27.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
1/18/13 11:29:27.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
1/18/13 11:30:02.000 PM kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
1/18/13 11:31:39.000 PM bootlog[0]: BOOT_TIME 1358548299 0

My address book and iPhone pics have become low resolution. Is there a way I can prevent this from happening when I start out with a higher resolution picture?

I guess I squeezed my entire issue into the subject line. lol When I sync my iphone to my laptop I notice that all my address book pics and iphone pics have become lower resolution, even though I started out with the resolution that I really needed to produce decenty address book printouts. I doubt I can correct the losses of resolution that have occurred but can anyone help me figure out how to prevent future losses? Thank you!

Plugins usually are installed externally to Firefox. However, you can disable them in Firefox so that Firefox does not use them.
SearchReset is supposed to automate the task of resetting certain preferences, but you still can edit them manually if necessary.
'''''Address Bar Search'''''
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''keyword''' and pause while the list is filtered
(3) Right-click '''keyword.URL''' and choose Reset. This should restore Google as the default for address bar search.
Does that work?
'''''Search Box'''''
Usually it works to choose your preferred search engine from the drop-down. To remove an unwanted search engine plugin, usually the Manage Search Engines... choice at the bottom of the drop-down takes care of it.
Do either of those work?
There might be another way to hijack that search box; I think some of the other frequent responders probably are more familiar with it than I am.

[Error in news] Please update news 2012-07-14 "/lib becomes symlink"

Hi,
Could someone please update the news article on the front page from 2012-07-14 regarding "The /lib directory becomes a symlink"? The instructions in it are no longer accurate, and following them results in a broken system.
If you can add the following lines from the DeveloperWiki, it would be perfect:
Note: for installs that have not been updated to glibc-2.16, it will save you lots of time and prevent major breakage to do:
pacman -U http://pkgbuild.com/~allan/glibc-2.16.0 … pkg.tar.xz
where <arch> is replaced by i686 or x86_64 as required. Add a single "-d" if needed. Then proceed with
*** INSTRUCTIONS THAT ALREADY ARE IN THE NEWS ***
(Yes, I know I should keep my system up to date, but I have servers that I only upgrade every once in a while. Following the instructions in the news usually works, but not in this case.)
AsmundEr

On such a server, assuming you don't want to be following Arch developments like a hawk, another distribution would serve you better. Arch is not some sort of 'best for everything' distro, the devs WILL willingly break things if there's a reason to, and in a period like the past year or so with so many changes mainly influenced by upstream, anyone who lags more than half a year behind is going to be caught in the 'special zone' of having to deal with more than one major change at once.
You CAN do that. You just need to know more about it than you would if you were updating every week (Allan says he uses Arch on his servers, but then again he knows what's happening in Arch, of course).

New rows become deleted from snapshot sites after refresh

Hi buddy
I am facing problem in snapshot at snapshot sites.
I have oracle 8.0.5 4 database server machines.
all servers machines have O.S windows 2000 advance server
all servers machine have same oracle version ( 8.0.5 ).
there is Site A ( Master site ) site B ( snapshot site ) Site C ( snapshot site).
snapshot has been created at all snapshots sites ( B,C and at D)
snapshot log against each table are also present at master site ( Site A )
refresh group is present at snapshot site.
these are working since feb-2002 successfully. now problem occur in these sites if some miner issues comes then it has been resolved successfully.
Replication parameter in init.ora all all sites are as follows
global_names = true
job_queue_processes = 2
job_queue_interval = 60
job_queue_keep_connections = false
distributed_lock_timeout = 60
distributed_transactions = 16
open_links = 4
snapshot_refresh_interval = 60
snapshot_refresh_keep_connections=false
snapshot_refresh_processes = 2
few days ago one problem occurs in master site A. it become crashed. we did its recovery from previous night backup ( cold backup).
Now all branches are working. but my current problem is that we have 20 tables in replication.It is a snapshot replication old version of materialized view.
when site B start refresh procedure then it show message procedure successfully completed.
it show no error message.
but when we check no of rows at snapshot site ( site b )
all new rows which were inserted at snapshot ( site b ) after previous refresh has been deleted.
mean all data which is inserted after previous refresh command has been finished. but data which is inserted at master site is present at snapshot site after refresh.
this problem is present at all the snapshot sites ( site B, Site C and site D).
database link is also present from master to snapshot site anf from snapshot to master. but problem is still suspended.
i have checked at all snapshot site and master site there is no invalid procedure or package.
there is no error message in alert file at all site.
if any body has its solution kindly told me.
thanks in advance
Abdul Hameed
[email protected]

This is still going on when the page fails the call to getCurrentRow().refresh(Row.REFRESH_REMOVE_NEW_ROWS) goes out to lunch and stops processing for the rest of the function. I tried adding a try catch around it but nothing is caught and the function still fails.
getSiteMealLogsV().getCurrentRow().refresh(Row.REFRESH_REMOVE_NEW_ROWS);
---Stops working here -----
getSiteMealLogsV().clearCache();
getDBTransaction().commit();
Jim

Top 10 Obstacles to Sql Developer Becoming a World-class Tool

I've been working with Sql Developer day and night for the last 6 months.
On a positive note, the SqlDeveloper team has been the most responsive Oracle product team I've worked with in the 19 years I've been working with Oracle tools. They pay attention to their customers. It's noticed and much appreciated!
I thought I would share the biggest problems that I face with the tool on a daily basis, the kind of problems that make me want to work with a different tool each and every day.
My intent isn't to gripe, it's to focus attention on the biggest productivity drains I face using the tool. Others may have a different list, based on their needs. Without further ado, here is my top 10 problems list:
1) Quality Control.
I cannot count on critical portions of the tool working correctly. This includes an oracle database development tool that is incapable of extracting oracle ddl correctly and which is incapable of correctly displaying information about SQL Server data and database objects. It also includes destroying connection files and losing keyboard settings. When the product was installed, it was incapable of properly displaying code in a worksheet when I scrolled thru the code. The details are listed in other postings of mine.
2) Quality Control.
See #1.
3) Quality Control.
See #1.
4) Very badly done threading.
The tool locks up on a constant basis when it does a many tasks. Rather than let me work on some other task, I have to wait for it to complete. My current work-around is to have two or three sql developer windows open. That sucks life out of my RAM supply, but at least I can get some work done. And, of course, it will often completely lock up and never return, which means I lose all unsaved worksheets. This forum is full of postings about these issues.
5) Memory Leaks / Internal memory corruption.
If I've had the tool open for a few days, or really worked it hard for a day, I will get bizarre compilation errors that make no sense. If I exit the tool, re-enter the tool, and compile the exact same code all will be well.
6) Awkward and slow data entry interface for frequently performed tasks.
Example: I create a new table and want to start defining columns for it. I remove my hands from the keyboard to press the + button, then I have to set focus on the column name field (it should do that for me!). Now that my hands are back on the keyboard, I have to backspace the dummy "column name" value in the column name field (it should ditch that dummy value for me). Only after all that can I actually enter a column name. When I want to add a new column, it's back to the mouse again, for the same drill. The down arrow key should take me to a new column record, as should pressing return at the end of the last field in the column row.
7) Destroys code
Changing a column datatype from varchar2 to nvarchar2 destroys the length of the column. Changing a field on a view destroys the instead of triggers. This is bad. There is no warning that this this is about to happen, which would at least give us a chance to avoid the problem. Better still, of course, would be not destroying that data.
8) Inaccurate checking for record locking.
When I try to edit records in a data grid for a table, I often get an error message telling me the data was modified in another session. It is simply not true. A hand-written update statement in a sql worksheet will work just fine. I've seen posts in the forum discussing this issue. An Oracle database development tool unable to reliably update oracle data tables is embarrassing. See Obstacle #1.
9) Unicode support
Sql Developer is heads above all the other tools I've tried out on this topic.
However, the configuration of the tool to provide unicode support needs to be simplified.
The tool needs to recognize the encoding of the files that are being opened up. On Windows Vista, Notepad seems to infallibly pick the right encoding for the file when I open it. Sql Developer should do the same. Files have specific encodings, the tool should have a default encoding (that I can override). Right now, the tool has a specific encoding and expects all files to match it. Extracting ddl to a worksheet does not respect the encoding choices of the tool, either. It only works with a limited set of tool encoding choices.
10) Resources
Does the sql developer team have the resources they need to compete with vendors like Microsoft? One really big reason for picking sqlserver over oracle is the ease of use of the Microsoft front-end tools. It's not until later that they may realize that Oracle has more capability, but that's still a lost sale.

We are acutely aware of quality and with each release work at improving this. Providing a polished, professional and ultimately user friendly and useful tool is our constant goal.
The broader our customer base grows, the more demands we have. This is a good and exciting position to be in, although it might mean that we need to slow down on our release cycles.
Release 2.0 should address more of the threading and memory leaks displayed as the team have rewritten some of the sections. As for resources, it's true we're a small team and we get on with the work that we do.It might be a little slower than some would like, but I'm not convinced that having large team is necessarily always the answer.
As ever, some of the points mentioned could be added to the Exchange. We'll be reviewing and updating the Exchange again in the New Year.
I think there is another point to add to your list. A lot of what the tool is and will become is from a positive customer interaction we have had to date. While we continue to grow this, I think the product will grow and improve. The forum and all the positive interactions that happen here are key to taking the product forward.
Regards
Sue

How do I become a Creative Cloud for Teams admin?

I am attempting to use the Creative Cloud Packager to ease the deployment of InDesign for two users, but I get error message "Your Adobe ID is not listed as an Admin for Creative Cloud for Team or Enterprise" when I attempt to login. How do I become a Creative Cloud for Teams admin?

Hi russmccabe333,
Please follow the steps mentioned in the kb: http://helpx.adobe.com/x-productkb/policy-pricing/creative-cloud-teams---customer.html#id_ 61014 to add yourself in the list of Team Admin.
Regards,
Romit Sinha

Adobe Muse (2014.3) "Add Web Font" Function Not Working As Expected - Newly Added Fonts Become Unavailable Though Shown

Hello.
This has also been posted in the Community: Adobe Muse Bugs forum.
I've been having some odd/irregular issues though they have now become fairly predictable in nature. The issue is in regards to Adobe Muse (2014.3) and the availability of web fonts provided through the applications "Add Web Fonts" feature. Once added they perform as expected but then become "unavailable." Full details below. I have been a Creative Cloud Complete subscriber for a number of years so am fairly familiar with the way in which the system works minus a few issues that have popped up now and then, this one included.
System Info:
Adobe Creative Cloud (Full Subscription): Version 1.9.1.474
Adobe Muse: Version 2014.3
OS X Yosemite: 10.10.2
Here is a recap of what has been taking place. I'll detail the bug as best I can.
1. Created new Adobe Muse project. Everything normal.
2. Chose to add a new font through the "Add Web Fonts" function within Muse. A note, my Creative Cloud App is running/open at all times (in file synch mode).
3. Chose new fonts using above. All seemed fine (see screenshots below).
4. Fonts also were indicated as being "Synched" within Creative Cloud (screenshot below).
5. As expected the two fonts were added to the list of available Web Fonts within Muse (first screenshot below - left). I added them successfully to my site. Well after a number of hours I went back to this same font selection menu within Muse and the fonts were still visible yet the sub-menu that one would expect showing various forms (i.e. Bold, Italic, etc) was not available. In a sense the font could not be chosen from the list even though the name is clearly visible (second screenshot below - right).
Have no idea what may have been wrong. Saved Muse project, closed and reopened - nothing changed. Created new project - fonts still "shown" in menu but can't be used. Did find a vague description using Google of similar problem (different application) which recommended closing Creative Cloud Desktop App and reopening as one possible solution. This DID WORK initially yet the problem, though corrected for a period of time (few hours at most), would reappear again where one would again see yet not be able to choose from the two Web Fonts. Went so far as to uninstalling the Creative Cloud Desktop application and reinstalling. Still have not solved the problem.
Any thoughts as to what this may be would be welcome. Restarting the CC app each and every time the fonts become unavailable is quite time consuming to my workflow.
Thanks!

Abhishek,
Thank you for the reply. Wanted to comment on a few things.
I reviewed the other post that you've referenced. Nothing unusual jumped out at me as something that I was not aware of. I'm running an older iMac that is in good working condition. 2.4 GHz Intel Core 2 Duo, 24" screen. I know this issue is fleeting, as I stated earlier typically can be corrected with a restart of the CC Desktop application (that I am always running at startup). I have not been able to determine that shutting down Muse corrects the issue. I would, at this time say it doesn't.
I did open InDesign and see if the fonts in question, Open Sans and Open Sans Condensed, were present and usable. They were. The fonts are shown as being synched in my CC Desktop app window (even if they are not "installed" in Muse). That is expected but it may be a bug in how Muse brings in a font from those that are already synched to your CC account. I don't know enough about how that works to comment.
And just to complicate matters, Muse seems to be working again, the fonts that is. I brought them back in and they are showing up in all locations (which there are actually three - see screen shots).
First is primary text menu dropdown (to right of orange "Text").
Second is if you click orange Text link. Another drop down menu appears.
And lastly, the Text Panel to right of screen.
I also wanted to add this extra bit of information, for what it is worth. When the issue arises and you do not get the sub-menu dropdown showing various styles of the font (italics, bold, etc.), one can use click on the missing font if you had used it previously and it is present in the "previously used font" list.
Cheers!

Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row! What should I do?

Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row!
What should I do?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

White MacBook become yellow-dirty

Hi,
I've read a lot of articles from the web about cleaning methods for white macbook.
I've bought this laptop in 2006 and now, after three years of use (I'm a lady and I usually have my computer sessions with clean hands :-)) the area (especialt dx part) near the trackpad and the trackpad button are become somehow 'yellow'.
As I've tried first with computer cleaning kit that was very good for the screen and exterior part but doesn't solve my real problem. Then, I've tried with 'magic rubber' of Mastro Lindo that works for almost everything, but in this situation also this one was useless.
So, my mac is not cover by assistance anymore, but I think is something related to the material, not to the use. Before getting frustrated and running after my reseller to ask for assistance, I'd wanna now if some other people have the same problem and it has a solution.
thanks in advance
michy

The white MacBooks only have dirt and discoloration problems for some people, not everyone. It all depends on what you put on your hands or what your body secrets more abundantly than you wash off. We are all biologically different.
I have heard many folks say that they good very good cleaning results using Mr. Clean Magic Eraser (U.S. based product name) but I have never had cause to use it so cannot comment from experience. It is an abrasive so using it on the glossy plastics seems like a bad idea, but again, I have no experience with it.

White Macbook Becoming Really Slow

Hi guys, I a have a late 2006 white macbook running on leopard (32GB free space) with the following specs:
Model Identifier: MacBook2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
my problem is that off late my macbook has become extremely slow and I keep experiencing the beachball syndrome!
This is also experienced when I am just browsing on safari and have an app like Word opened. Safari crashes more than once a day and the entire system seems to freeze up when I am running even basic apps like firefox, word, itunes, preview etc
I can understand a lag if I am running Photoshop but this is becoming quite bugging. I still have a year of warranty left btw.
What I was wondering shall I upgrade to Snow Leopard since its not very expensive? I dont want to upgrade my RAM, as by next year I will get the Pro. Also if I upgrade my OS, how will I install the back up data again? And will that affect the problem?
Will a clean reinstall help?
Any help would be appreciated.
Btw I keep running Onyx regularly and fix the permissons etc after every 10 days.

If your machine is slow right now, you need to figure out why--upgrading to Snow Leopard could make the machine even slower. Overall, Snow Leopard improves performance for machines, but if the machine has issues already, you may not see the improvements.
Here's some things to try:
In Applications>Utilities, open *Disk Utility*. In the left-hand column, click *Macintosh HD*, then click the *Verify Disk* button. Report any errors here.
You also want to reseat your RAM and see if that helps; instructions here:
http://support.apple.com/kb/HT1651
~Lyssa

As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version. How can change it back to the laptop version?

As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version. How can change it back to the laptop version 5.7?
Thanks for any help you can provide.

LR on your laptop is still a desktop version. It is just now able to upload to the cloud to replicate photos to either http://lightroom.adobe.com/ or an iPad that has LR Mobile installed.
I think you probably just want to change the LR 5 identity plate back so it doesn’t mention LR Mobile all the time. Hover over the identity-plate area, and click on the little triangle that appears, then choose Change Identity Plate.

Undecorated JInternalFrame becomes decorated by itself.

Hi,
I’m facing a problem with JInternalFrame implementation. I have made the JInternalFrame undecorated, so that the title bar and border of the JInternalFrame gets removed. The problem occurs in the following scenario.
*1)     Execute the program in a Windows 7 machine.*
*•     At this point the JInternalFrame remains undecorated.*
*2)     Access the Windows 7 machine using remote desktop sharing from another machine.*
*•     Now the title bar and border of the internal frame becomes visible.*
This issue occurs only in Windows 7 machine, and not in Windows XP. You can access the Windows 7 machine using remote desktop sharing from another Windows 7 machine or Windows XP machine.
Also if you access the machine using remote desktop sharing first, and then execute the program, the JInternalFrame remains undecorated.
Steps to reproduce
Step 1: Execute the application in a Windows 7 machine.
Step 2: Access the Windows 7 machine using remote desktop sharing from another Windows 7 or Windows XP machine.
Step 3: Check the GUI of the application
Result :- The title bar and border of the undecorated JInternalFrame becomes visible.
If anyone has faced this issue or if anyone has a solution for this issue, kindly share your thoughts.
A sample code using which you can reproduce this issue is given below.
* Copyright (c) 1995, 2008, Oracle and/or its affiliates. All rights reserved.
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* - Neither the name of Oracle or the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
import javax.swing.JInternalFrame;
import javax.swing.JDesktopPane;
import javax.swing.JMenu;
import javax.swing.JMenuItem;
import javax.swing.JMenuBar;
import javax.swing.JFrame;
import javax.swing.KeyStroke;
import javax.swing.plaf.basic.BasicInternalFrameTitlePane;
import javax.swing.plaf.basic.BasicInternalFrameUI;
import java.awt.event.*;
import java.awt.*;
* InternalFrameDemo.java requires:
* MyInternalFrame.java
public class InternalFrameDemo extends JFrame
implements ActionListener {
JDesktopPane desktop;
public InternalFrameDemo() {
super("InternalFrameDemo");
//Make the big window be indented 50 pixels from each edge
//of the screen.
int inset = 50;
Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
setBounds(inset, inset,
screenSize.width - inset*2,
screenSize.height - inset*2);
//Set up the GUI.
desktop = new JDesktopPane(); //a specialized layered pane
createFrame(); //create first "window"
setContentPane(desktop);
setJMenuBar(createMenuBar());
//Make dragging a little faster but perhaps uglier.
desktop.setDragMode(JDesktopPane.OUTLINE_DRAG_MODE);
protected JMenuBar createMenuBar() {
JMenuBar menuBar = new JMenuBar();
//Set up the lone menu.
JMenu menu = new JMenu("Document");
menu.setMnemonic(KeyEvent.VK_D);
menuBar.add(menu);
//Set up the first menu item.
JMenuItem menuItem = new JMenuItem("New");
menuItem.setMnemonic(KeyEvent.VK_N);
menuItem.setAccelerator(KeyStroke.getKeyStroke(
KeyEvent.VK_N, ActionEvent.ALT_MASK));
menuItem.setActionCommand("new");
menuItem.addActionListener(this);
menu.add(menuItem);
//Set up the second menu item.
menuItem = new JMenuItem("Quit");
menuItem.setMnemonic(KeyEvent.VK_Q);
menuItem.setAccelerator(KeyStroke.getKeyStroke(
KeyEvent.VK_Q, ActionEvent.ALT_MASK));
menuItem.setActionCommand("quit");
menuItem.addActionListener(this);
menu.add(menuItem);
return menuBar;
//React to menu selections.
public void actionPerformed(ActionEvent e) {
if ("new".equals(e.getActionCommand())) { //new
createFrame();
} else { //quit
quit();
//Create a new internal frame.
protected void createFrame() {
MyInternalFrame frame = new MyInternalFrame();
frame.setVisible(true); //necessary as of 1.3
desktop.add(frame);
try {
frame.setSelected(true);
} catch (java.beans.PropertyVetoException e) {}
//Quit the application.
protected void quit() {
System.exit(0);
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event-dispatching thread.
private static void createAndShowGUI() {
//Make sure we have nice window decorations.
JFrame.setDefaultLookAndFeelDecorated(true);
//Create and set up the window.
InternalFrameDemo frame = new InternalFrameDemo();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
//Display the window.
frame.setVisible(true);
public static void main(String[] args) {
//Schedule a job for the event-dispatching thread:
//creating and showing this application's GUI.
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
/* Used by InternalFrameDemo.java. */
@SuppressWarnings("serial")
class MyInternalFrame extends JInternalFrame {
static int openFrameCount = 0;
static final int xOffset = 30, yOffset = 30;
public MyInternalFrame() {
super("Document #" + (++openFrameCount),
true, //resizable
true, //closable
true, //maximizable
true);//iconifiable
//...Create the GUI and put it in the window...
//...Then set the window size or call pack...
setSize(300,300);
// Undecorating the internal frame
BasicInternalFrameTitlePane titlePane =
(BasicInternalFrameTitlePane) ((BasicInternalFrameUI) this.getUI()).
getNorthPane();
this.remove(titlePane);
this.setBorder(null);
//Set the window's location.
setLocation(xOffset*openFrameCount, yOffset*openFrameCount);
}

Thanks a lot for that lead Walter.
Actually when I tried to override updateUI(), I got a NullPoinerException. Instead of that, I tried overriding the paintComponent() method, did the undecoration part in that method and, and called super.paintComponent(g) inside the method. Then the issue was resolved.
Once again, thanks for the quick reply.

Dell Venue 11 Pro 7140 WiFi becomes disconnected during idle or waking from sleep

I have a Dell Venue 11 Pro 7140 in which the wi-fi consistently becomes disconnected when either the tablet is idle for a period of time, or if it has woken from sleep. Period of time varies -- more than 5 minutes, but less than an hour.
When wi-fi connection is lost, the only way to connect again is to reboot. Not much of a solution. USB 3.0-to-Ethernet adapter is rock-solid, but there isn't much point in having a tablet if you can't be wireless at some point.
Things I've tried:
- Optimized the intel driver settings roaming agressivenes: medium-low, Throughput booster: enabled, Transmit Power: highest.
- toggling airplane mode, disabling/enabling via Network Connections
- creating a custom wireless profile
Really, not sure what I can try next. I've used other Windows 8.1 Pro laptops, and none of them have been this spotty.
If anyone has a solution out there, I'm game to try. Otherwise, I'll be returning this back to Dell as a defective product. There seems to be issues about earlier versions of the Venue 11 Pro, but I haven't been able to find much on the 7140 version.
Fully updated Windows 8.1 Pro. Using Intel dual-band Wireless AC 7265 adapter with v17.13.11.5 of the driver. BIOS version A03.

Hi Jennifer, Saturday 4th April 2015
This whole process from order date 14th March 2015 to now has been frustrating, my mistake was to get one of the sales consultants on chat to check the saved cart, had compatible accessories for this tablet. From then on, after multiple quotes in the end he still managed to get the address wrong and missed putting screen protector on the order, multiple emails and phone calls the following week finally got address changed but couldn't get screen protector added to order in the end I ordered it over the internet. I should have cancelled order when I wanted to.
What should have been a simple process is now a nightmare the Tablet with screen protector needs to be replaced has not worked properly since unboxing and first switch on , spent many hours of installing updates, contacted technical assistance last Thursday they did a remote hookup changed some things worked for a little time.
Totally disappointed
Leigh
PS update 7th April 2015 started factory reinstall last Friday reinstalled all recomended updates more wasted time tested over weekend WiFi still not working after sleep mode. When I check for new updates keeps asking to reinstal theses 2 updates already done, reinstal them over and over still tells me to update them, second file fails to instal have to manually instal O2 Micro file searches wrong place for missing component.
"Automatic updates
These updates can be installed automatically.
Intel(R) Management Engine Components Installer View full driver details
Chipset_Driver_3TY1R_WN_10.0.31.1000_A02.EXE | Chipset (107MB) | Recommended
Download File
Add to download list
O2 Micro OZ777xxx/OZ621XX memory card reader Driver View full driver details
Chipset_Driver_VPNKY_WN_3.0.8.45_A06.EXE | Chipset (16MB) | Recommended
This file will automatically self-install after downloading.Restart required "
There is something wrong with this tablet.
Download File
Add to download list

It becomes ... S l o w

Similar Messages

Maybe you are looking for