It can't be done in coldfusion !!!!

Hi
I am trying to create a master detail page for a photography
site, easy enough but I am trying to put next and previous links on
the detail page next to the image so that you can go to the next
and previous record from the original query on the detail page.
I have tried everything but can't get it working, I read a
few forums and they said it couldn't be done so here's a challenge
if anyone would like to accept it.
I somehow need to get the original recordset from the master
page across to the detail page and what position the photo had in
the recordset.
Please help
Kris

In article <fc7ujl$hli$[email protected]>
"whereskris"
<[email protected]> wrote:
> I have tried everything but can't get it working, I read
a few
> forums and they said it couldn't be done so here's a
challenge if
> anyone would like to accept it.
Don't know which forums you were reading but this is trivial
in CF.
You can put the start record number & records per page in
the URL and
use those to drive the query on each page. For extra
performance, you
can cache the query in session scope so you don't have to hit
the
database on each page.
Sean A Corfield -- (904) 302-SEAN
An Architect's View --
http://corfield.org/
cf.Objective() 2008
Early May, near Minneapolis, MN
The world's ONLY enterprise engineering conference for
ColdFusion
http://cfobjective.com/

Similar Messages

Can I upgrade directly from ColdFusion 9 Enterprise to ColdFusion 11 Enterprise without going to 10 first?

Can I upgrade directly from ColdFusion 9 Enterprise to ColdFusion 11 Enterprise without going to 10 first?
For those who have done this,
1. What quirks did you find that you had to overcome in your installation (I know that everyone's environment is different and produces differest results)?
2. What part of your code broke for which you had to find fixes?
Tips and suggestions for a smooth installation, besides following the installation document.
Thanks!

Create a car (archive file) in CF 9 enterprise which will capture all CF 9 settings like Data sources, Web services etc. Make sure when you are doing this, pop up blocker is disabled.
NOTE : While creating the archive file, give the full name with the absolute path in the package name. For example C:\Test\mypackage.car
Then move this car file into the server where you want to install CF 11. Install CF 11 and then deploy this archive (car) file. All CF 9 settings will be migrated to CF 11 enterprise.
Else, if you want to install CF 11 on the same server where CF 11 is installed, then remove the connector for all the websites which are configured with CF 9, make sure the CF 9 services are running and then run the CF 11 installer and at the end of CF 11 installation, you will get a dialogue box which will ask you to migrate CF 9 settings in CF 11.
Run the Code Analyzer in CF 11 Administrator to check whether any the CF 9 code used in your application is breaking in CF 11 or not
HTH
VJ

Can I do this in coldfusion?

Hi all. I need to do the following
1. Log into a website
2. click a link
3 download a file by clicking a button (and accepting the
file download in the pop up)
Can I do this in coldfusion?

quote:
Originally posted by:
SilentBob'secretfusion
Hmmm. This forum is acting funky this morning. Messages
appearing and disappearing.
Anyway, to be honest. I am alittle lazy and don't really want
to code all this. Do applications exist which can capture the users
actions, record them, then repeat them when required.
JMeter (
http://jakarta.apache.org/jmeter/
) can actually do exactly what you're asking for. With Jmeter, you
can "record" a user's session clicking around a web site, and you
can save it to a "test plan". You can then re-run that "test plan"
over and over again. You can also configure it to run multiple
"threads" (users) performing those actions at the same time.
This tool often comes in handy for performance and load
testing, but can be used for a variety of other purposes.

I would like to know it it's possible to change the scroll bar from the right part of the firefox browser, to the left part and, if it's possible, how can it be done. Thank you!

The scroll bar (the one used to scroll up and down any kind of website), that is normally in the right part of the firefox browser, would be of much help to me if it could sometimes be moved to the left part of the browser. Is this possible? How can it be done? Can anybody tell me the exact steps to take in order to do this (if it is possible of course)? This would be helpfull to me, since I think that the firefox scroll bar is overlaping the scroll part of the facebook chat sidebar, since I just can see a few people on this facebook chat sidebar and I can´t scroll along it, as I could a while ago. So my guess is that the firefox scroll bar is covering the other. In order to solve it in a simpler way, I guessed that if the firefox scroll bar could be moved to the left side of the browser, this problem could be solved. So, can anybody help me?

http://kb.mozillazine.org/layout.scrollbar.side
Type '''about:config''' in Location (address) bar
filter for '''layout.scrollbar.side'''
Right-click the Preference and Modify it to '''3'''
You may need to reload any pages open to have scrollbar move to left after Preference change.

Can anything be done to change the white on grey color scheme in Bookmarks?

I just upgraded my Mac Book Pro to OS X Version 10.9.1. I was horrified when I got a look at what Apple has done to Safari! I have macular degeneration - which means that my eyesight is slowly fading away. Bookmarks was especially difficult because all of the bookmrks are shown with a white on grey color scheme. And when the "new" Apple color schemes are not white on grey - they are grey on white. I simply can NOT see anything which is white on grey. OR white on ANY light color. In order to be able to see anything, I need to have contrast. For example, as I type on this page, the scroll bar is grey on white. It has become almost impossible for me to find the scroll bar on most pages. Previously, my scroll bars where usually bright blue. I can see bright blue on white - but NOT grey on white. I can read white letters on BRIGHT or DARK Blue -but NOT light blue.
Apple has made SO many strides in makes computers accessable to those of us who have no other choice except to deal with disabilities! Can ANYTHING be done to change the white on grey color scheme which Apple has adopted throughout its system?
Now, in order to use my Bookmarks, I have to go to my Edit Bookmarks page. Even that solutation is not all that helplful, because the lettering on the Edit Bookmarks page is so small.
Also - I discovered that the "new" Mail pages had the same problem. For the most part, the "innovations" in mail make all of the pages too busy for me to be able to sort my mail or keep track of it in any way. I had to choose to return to the "classic" mail option to be able to get a reasonable facsimile of being able to handle my E mail accounts!
And, of course, once again, the scroll bar on my mail accounts is also grey on white - so it takes a lot of searching for me to just find the scroll bar when I need to scroll down in an E mail!
ALSO - I was equally horrified when I discovered that the Upgrade to Version 10.9.1 made it impossible for me to visit some of my favorite music pages - most of which use MIDI files! I can no longer hear any of my favorite MIDI music pages! I TUNES, of course, is in love with people like Lady Gaga - the type of performers - and performances - which have no relevance to older Americans.
I do volunteer work at a local Assisted Living facility and one of the greatest advances we have been able to make with Alzheimers patients is the way in which Senior Citizens respond to music from their time period. Unfortunately, most of the music which senior citizens prefer to listen to is music which has been preserved in MIDI pages. A few weeks before I "upgraded" my Mac Book Pro - I could take my computer over to the local Assisted Living Facility and play music from Hymn Time's Cyberhymnal or the Angelwinks tunes - but I can NO longer do that with the current Apple "upgrade" in version 10.9.1 - because the music from those MIDI pages can no longer be heard by anyone! The page comes up and you can see the writing - but no one can hear any of the music. We understand that a group in Switzerland has been working on an APP for I Phones which DOES make MIDI files accessable - so surely it should be possible to provide a way for Version 10.9.1 users to listen to MIDI files, such as those provided by Hymn Time's Cyber Hymnal or by Angelwinks!
You will notice that I changed the font for this to Arial Black - primarily because I could NOT see what I was writing when I first began - because, once again, the color scheme was grey on white.

Hi Grandma,
18 point Helvetica Bold .
There is an Apple Support Community called Vision:
https://discussions.apple.com/community/accessibility/vision?view=discussions
I shall ask the Moderators (Hosts) to move your discussion to that forum.
Kind regards,
Ian.

TS3988 I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud?

I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud? I plan on getting rid of my old email address which is my old Apple ID so how is that going to work?

Same question Wish someone had replied!
I changed my Apple ID to my new email and now cannot find any way to access icloud. Unfortunately I had allowed icloud to hijack my airbook files, so of course I am afraid I will lose them tomorrow when I exchange my iphone for a new one and cannot keep an icloud account i cannot access. What a poor sync system! Really atypical for apple!

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

Well, I really would love the new unreleased mac pro however , I'm not sure of the expected cost , Everyone speculates from $3,000 to $8,000, in which I may have to wait a while to purchase.
To the point .... I want fully functional thunderbolt ports to be on the current mac pro's .... wonder if anyone had workarounds yet?... or could I chain the the current mac pro to a mac mini to make that happen?

I AM TRYING TO FORWARD TX MESSAGES TO MY COMPUTER, CAN THIS BE DONE?

I AM TRYING TO FORWARD TX MESSAGES TO MY COMPUTER, CAN THIS BE DONE?

You should be able to forward them to your e-mail, or you could use a text backup app from Google Play that will backup your texts and e-mail them to you (SMS Backup and Restore is an example).

In Mail with Snow Leopard you could number your e-mails. Can this be done with Lion?

In Mail with Snow Leopard you could number your e-mails. Can this be done with Lion?

If you're referring to desktop icons, right click on the desktop > Show view options > check "show item information".

Export a report from another page with parameter problems...can it be done?

Hi All,
I have used Dennis Excel pkg which works fine if on the same page... however, I want users to enter two dates in my items
P5_FIRST_DATE
P5_SECOND_DATE
I have manged to create a button that will execute the report on the second page without parameters
by choosing the redirect to url and this does work...
however, when i parameterize the url, it still works but does not send across the values
here is what i am using in the url
#a href="f?p=102:7:3458199286078769:FLOW_EXCEL_OUTPUT_R2491013790251874" ##a href="f?p=102:0:3458199286078769:DOWNLOAD_EXCEL:NO::T_REGION_ID,T_EXCEL_NAME,T_PAGE,PFIRST_DATE:R2491013790251874,my_report,7,:P5_FIRST_DATE"
This does work... but does not putt the parameters across
Can this be done? or is there a better way of doing this. I dont really want them to see the report because it just a list of urns with dates which the user enters which they will always want to download
so i just want them to add the dates and download
thanks for your time in reading this
cheers

Fazlar,
This is how you do it:
http://apex.oracle.com/pls/otn/f?p=23521:8
You should never name your items
P5_FIRST_DATE
and put the item on the page 8. This is confusing and costs a lot of time to find out an item
doesn't exist.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

How do I set up two separate iTunes accounts on one MacBook Pro in order to manage the wife's iPhone and my iPhone? Can this be done?

How do I set up two separate iTunes accounts on one MacBook Pro in order to manage the wife's iPhone and my iPhone (with separate info on each of course) ? Can this be done? A little step by step would be greatly appreciated; just short step by step though, I can follow fairly well.
Kindest Regards,
Phil T.

You would each need to use your own user account on the Mac, you can do this at system preferences > users & groups.

I have produced several short iMovie projects and want to link them into a continuous stream on a DVD. Can it be done? All of the projects are in my Moblie Me Gallery

I have produced several short (2 to 3 minute) iMovie projects and want to link them in a continuous stream on a DVD. The clips are in my Mobile Me gallery. How can it be done?

You can do that too, it's all in the iDVD program.
But first you want to assemble the separate clips into one big long clip. For that you would use iMovie. Share to the Media Browser (choose the Large size). Let it export then quit iMovie.
Open iDVD, click on the Media button and then the Movies button. Under the iMovie star icon you will see your final assembled clips movie. In the iDVD project window turn on the map view (it's little boxes that look like a flowchart) then drag the iMovie project into the first box:
You can set the project to startup without a Menu, and then loop continuously as well. Go up to the Advanced Menu then click on the Loop movie option to turn it on.
Once checked the Loop movie status will appear as curved arrow icon in the Project Window:
In the lower right corner is the icon indicating this video clip will loop while being played.

I would like to transfer the balance from one Apple ID to another how can this be done??

I want to transfer the account ballance from my account to my son's. I unintentionally redeemed one of his gift cards to my account. how can this be done?

Sorry, but balances can't be transferred from one iTunes Store account to another. You'll either have to make his purchases through your account, or buy another prepaid card and redeem that in his account.
BTW, for future questions, this forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help if you ask in the general iTunes forums.
Regards.

I want to shoot a movie on my iPhone and edit it on my iPad using the iMovie app. How can this be done via iTunes on my computer?

I want to shoot a movie on my iPhone and edit it on my iPad using the iMovie app. How can this be done via iTunes on my computer?

You can't drag video into the filesharing pane of iTunes, you can only transfer projects.
Videos need to come in via the photos tab of iTunes.
The easiest way to get videos from the iPhone to the iPad is via the project export import.
Projects can be exported from the iPhone, then imported to the iPad like this:
iPhone Send a project or trailer to iTunes
If the marquee screen isn’t showing, tap the My Projects button .
Scroll to center the project or trailer you want to share.
Tap the Share button at the bottom of the screen, and then tap iTunes; tap OK when iMovie indicates that export is complete.
Connect your device to your computer, and then open iTunes on your computer.After a moment, your device appears in iTunes, below Devices on the left.
Select the device, and then click Apps at the top of the iTunes window.
Select iMovie in the Apps list below File Sharing. (You may need to scroll to see it.)
In the iMovie Documents pane, select the file you just shared, and then click the “Save to” button; save the file to your computer in a place where you can find it easily.You can also save the file by dragging it to the desired location on your computer.
Disconnect the device from your computer.
iPad Import a project or trailer from iTunes
Connect your device to your computer, and open iTunes on your computer.After a moment, your device appears in iTunes, below Devices on the left.
Select the device, and click Apps at the top of the iTunes window.
Select iMovie in the Apps list below File Sharing. (You may need to scroll to see it.)
Click Add below the iMovie Documents pane; in the window that appears, navigate to the file you want to add.
Select the file, and then click Open to copy the file to your device.The file appears in the iMovie Documents pane when copying is complete.
Open iMovie on your device; if the marquee screen isn’t showing, tap the My Projects button in the upper-left corner above the viewer.
Tap the Import button at the bottom of the screen, and then tap the name of the project you want to import.When the import is complete, the project opens and can be edited like any other project.

How can I import a movie into iMovie 09 from a hard drive? The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import. Can it be done?

How can I import a movie into iMovie 09 from a hard drive? The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import. Can it be done? I am trying to create a disc of player highlights for a collegiate coach, and I am using movie files downloaded to my hard drive from a DVD created on a PC.

No unfortunately it won't open in quicktime either. It does the same thing that Imovie does, separates it into two file folders audio and video, and if i select video it opens to reveal 8 files that cannot be selected. VIDEO_TS.BUP, VIDEO_TS.IFO, VIDEO_TS.VOB,VTS_01_0.BUP, VTS_01_0.IFO, VTS_01_1.VOB, VTS_01_2.VB, VTS_01_3.VOB. All of which cannot be opened or selected.
Opening it in Idvd and folllowing your suggestion works and I get a format code of NTSC. Is that the same? Thank you for your time and response.
CaCanuck

It can't be done in coldfusion !!!!

Similar Messages

Maybe you are looking for