It can't read the chinese character in the search engine that I write on the Crystal Touch Penpower

I use the Crystal Touch of Penpower to write Chinese into the Google search but it shows nothing in the search box.

Thanks for the reply Yvan.
I have tried the TextEdit method, using Jedit X, which someone on the Chinese Mac group (see above) suggested. However, using this sort of program is way above my pay grade and I have no idea how to do it!
I am taking you up on your kind offer to look at some of the files, and am sending you 2 files, one an AppleWorks file, and the other an Excel file. I hope you can make more sense of it than I can.
Andrew

Similar Messages

Is there a way to darken the dates (numbers) on ical. After installing Lion I can barely read the dates of the month in ICal

Is there a way to darken the dates (numbers) on the ICal calender. I can barely read mine after installing Lion.

I should note that the time stays on the left of the event name when I re-enter the text (which I had to do all the time before I found the "show event times" button) so I feel like there's a way.

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem-.thanks

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks

If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

I have the latest downloadable version of LR5. It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next

I have the latest downloadable version of LR5. It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next time is launches. I get the same message the next and every subsequent time it launches so I can't launch LR at all now.
I get that the preview file got corrupted somehow. Is there some way to fix this problem without building a new catalog?

Use Windows Explorer to open the folder containing your catalog. You will see a folder with the extension .lrdata. You need to delete that folder and then start Lightroom again. Lightroom will generate a new previews folder.

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

How can I read the bootstrap files and extract the fragment-URLs and fragment-numbers in plain text?

How can I read the bootstrap files of any HDS Live stream and extract the fragment-URLs and fragment-numbers in plain text?
Could it be that it is some kind of compressed format in the bootstrap? Can I uncompress it wirh f4fpackager.exe? Could not find any download for f4fpackager.exe. I would prefere less code to do so. Is there something in Java of JavaScript, that can extract the fragment-numbers?
Thank you!

Doesn't sound too hard to me. Your class User (the convention says to capitalize class names) will have an ArrayList or Vector in it to represent the queue, and a method to store a Packet object into the List. An array or ArrayList or Vector will hold the 10 user objects. You will find the right user object from packet.user_id and call the method.
Please try to write some code yourself. You won't learn anything from having someone else write it for you. Look at sample code using ArrayList and Vector, there's plenty out there. Post in the forum again if your code turns out not to behave.

Help required please. "Itunes can not read the contents of my iphone"

Greetings all,
I know this question has been asked before and I apologize for asking again but all the solutions provided don't seam to work for me, can anyone help me please.
I am receving the message: "Itunes can not read the contents of the iPhone. Go to the summary tab In iPhone Preferences and click restore torestore this Iphone to factory settings".
Now a little about my iphone, Itunes and my laptop and what steps i havealready tried.
I have an iPhone 4 running software 5.0
My itunes version is 10.5.0.142
I know these are not the most up to date versions but I have had this issue for almost 3 months now and updating the software back then was the first step I tried. I don’t believe updating to the latest will fix this issue as updating the last two times did nothing.
Every so often after starting Itunes, The program will stop responding and will require the three finger death kill (CTRL, ALT, DELETE) to open task manager to end the task of Itunes. Once it shuts down, I restart the iTunes and it runs smoothly, apart from not reading my iPhone.
When I run a diagnostic in itunes under the help tab, I get these fail messages:
Network Connectivity test: Secure link to Itunes store fail
Device connectivity test: Under support services: Itunes helper is not running. And under ports: No iPod, iPhone or iPad found.
Device Sync test: No iPod touch, iPhone or iPad found.
*See below for full diagnostic report*
I have restored back to factory settings twice.
I have shut down and restarted both my iPhone and laptop.
I am running Windows 7 32-bit on my laptop.
I am using ZoneAlarm as my fire wall, and have been disabling it when syncing my iPhone to prevent other error messages.
The iPhone is plugged into a genuine Iphone USB cable and is plugged into a USB port not a USB hub on my laptop, I have tried plugging it into all 4 USB ports and this issue still persist. The Cable is less then 5 months old, is not frayed or damaged in any way, have also borrowed 2 other cables from friends and still the same issue.
The iPhone does not even come up in windows explorer as a digital camera.
The iPhone is NOT jailbroken
I do not live close to a so called genius bar, however I have made the journey to them on 3 separate occasions last year when I first received my iPhone for a different issue, the so called genius's could not fix the problem so they just gave me a new (refurbished) iPhone, which did not extend my warranty. I will not be taking the iPhone back to them as I believe they can not resolve many issues, this is why I am reaching out to the power of the people in the wider apple community.
I have read in other forums about ifunbox and other programs for jail broken iPhones to isolate folders “iTunesDB” and "iTunesCDB" and delete them. If this is the issue is there a way to access these files through windows explorer as my iphone is not jailbroken.
I hope I have provided enough information and someone can help me fix this issue. If I have left anything out, please let me know. I thank everyone in advance for your patience and support.
Thanks
Hoggie27
FULL DIAGNOSITC REPORT
Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 001BAD14XXXXEA78
Current user is an administrator.
The current local date and time is 2011-11-16 10:04:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 230M
**** External Plug-ins Information ****
No external plug-ins installed.
The drive H: Vodafone USB SCSI CD-ROM Rev USB is a USB 1 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {97524DB0-B9DC-41DB-8AFA-0CE6938F7C95}
Description:    PC
IP Address:    (HAS BEEN REMOVED FOR PERSONAL REASONS)
Subnet Mask:    255.255.255.255
Default Gateway:    0.0.0.0
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:    10.143.147.147
        10.143.147.148
Adapter Name:    {BFF0456E-DE42-4FEF-B1FA-1EA1C5EDEE42}
Description:    Vodafone Mobile Broadband Network Adapter (ZTE)
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:
Adapter Name:    {D5511FFD-0CA8-4F62-B3CA-E90384FFCD03}
Description:    Broadcom 43225 802.11b/g/n
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:
Active Connection:    PC
Connected:    Yes
Online:        Yes
Using Modem:    Yes
Using LAN:    No
Using Proxy:    No
SSL 3.0 Support:    Enabled
TLS 1.0 Support:    Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-16 09:59:57.
**** CD/DVD Drive Tests ****
LowerFilters: Afc (1.0.0.2),
UpperFilters: GEARAspiWDM (2.2.0.1),
F: hp CDDVDW TS-L633N, Rev 0300
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 5.0
Serial Number:    85107XQLA4S
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
< Edited By Host >

Hi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again

After upgrading to ios 6.1, I experienced the following problem: I am no longer able to read the magazine I subscribed (The New Yorker) if I don't have access to internet. If the iPad is on FlightMode I can't read the magazine or the books in iBooks

After upgrading to ios 6.1, I experienced the following problem: I am no longer able to read the magazine I subscribed (The New Yorker) if I don't have access to internet. If the iPad is on FlightMode I can't read the magazine or the books in iBooks. Can you help me?

I am having the same problem. I have a 2nd generation ipad wi-fi only. All was working great until I upgraded. NONE of my downloaded magazines or rss-feeds are accessible. For the magazines, their icons show up on the "shelves" but once you click on one it wont even take you to the "issues" i have downloaded. it jumps back to the shelf page.

My printer menu is no longer displaying in English. I can't read the display to try to troubleshoot

My boss' printer HP Color LaserJet CP2025 - menu no longer displays in English. I can't read the display to troubleshoot or reset. Is there another way to change the setting?

I have not verified these steps, but this is what I located:
A. To change the display language back to English, please perform the following steps:
1. Press the right arrow 2 times, press the OK button (you should be in the System Setup menu).
2. Press the OK button again (you should be in Language).
3. Press the right arrow until you see something that may be English, press OK button. The menu is a continuous loop, so if you miss it the first time the option will return.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

What do you do when you can't read the code on a iTunes gift card?

What do you do when you can't read the code on a iTunes gift card? I tried taking it back to the store with my reciept, but they said I would have to contact Apple support. Am I out just out $25 dollars?

See this support article:
http://support.apple.com/kb/TS1292
Instructions are at the bottom of that article.
BTW, this forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. Normally you want to ask your questions in the general iTunes forums.
Regards.

My iMac suddenly can't read the backup hard drive I've been using for Time Machine. I did NOT just upgrade the OS or anything. The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago.`

My iMac suddenly can't read the backup hard drive I've been using for Time Machine. I tried unplugging the cord that connects the HD to the iMac and plugging it back in, but I still get "The disk you inserted was not readable by this computer" below which are buttons for Initialize, Ignore and Eject. I was using a cord that went from larger square plug to larger square plug. So then I tried one that went from smaller square plug to what I think is USB (thin rectangular plug) of the sort that connects the keyboard and mouse. It's the type that my printers and scanners use to connect to the iMac. I did NOT just upgrade the OS or anything. The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago. What else can I try before just trying to initialize and

Thanks, Michael! I do hear it at times spooling up and running. Just after I bumped the thread I looked for troubleshooting for this drive online and found the manual which suggested using Disk Utility which I've seen before accidentally (if I hit Command Shift U instead of Shift U to type "Unit" on a new folder for a student's homework ) but had never really noticed. Disk Utility does see it and also a sub-something (directory?) which might be the Time Machine archives on the disk, called disk1s2), sort of the way that my iMac's hard drive shows up as 640.14 GB Nitachi HDT7... and has a sub-something titled DB iMac, which is what I named my iMac's hard drive.
Anyway the owner's manual just shows the image under the formatting section, not the troubleshooting section, but as soon as I saw it in the manual I remembered seeing it accidentally a few times, went to it, and am now verifying the disk. Right now it's telling me that it will take 2 hours to complete the verification, so I guess I have a bigt of a wait. :-)
Does that fact that Disk Utilities can see it mean it's not failed, or just that it hasn't completely failed?
I can see the virtue in having multiple redundant backups, or at least two backups. What do you suggest? Two external hard drives? I had this one linked by ethernet, and but I also have a cord that could link it by USB (like a printer), so if this one is reparable I could get a second one and link it by USB. If this one is not reparable I could get two and do the same thing. I do have an Airport so I suppose it's possible to get some sort of Wi-Fi hard drive (my new printer/scanner uses only the network and not a cable, although it has a cable that I used for the initial installation), but I'd suspect a Wi-Fi hard drive might have a higher price.
What hard drives, if any, do you recommend? I seem to recall that when I was looking at external hard drives 4 years ago, Apple's were substantially more expensive, which is why I got the OWC Mercury Elite All Pro.

I just downloaded the newest version of Itunes. I can't delete anything and I can't sync to my MP3 player. I tried deleting it and installing an earlier version of Itunes but it can't read the library. Please help.

I just downloaded the newest version of Itunes on my Windows 7 PC. I can't delete anything and I can't sync to my MP3 player. I tried deleting it and installing an earlier version of Itunes but it can't read the library. Please help.

With iTunes 11 on PCs the drop-down menus are hidden by default - control-B should get the menus to show
This screenshot is from a Mac, but it should be similar on a PC :

Hi there, I need to be able to read raw files from an Olympus Stylus 1 via CS5 and Lightroom 4. I have downloaded Raw file plug-in v 6.7.1 but still can't read the files.

Hi there, I need to be able to read raw files from an Olympus Stylus 1 via CS5 and Lightroom 4. I have downloaded Raw file plug-in v 6.7.1 but still can't read the files?

Read this table http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
The Olympus Stylus 1 was first supported in Camera Raw 8.3 which is only compatible with CS6 and CC.
It is not compatible with CS5 or older and never will be.
If you do not want to upgrade to CS6 or CC then you can dwonload the free Adobe DNG converter, convert all Stylus 1 Raw files to DNGs then edit the DNGs in CS5.
Camera raw, DNG | Adobe Photoshop CC

I have CS4 and was using a Canon 5D Mark II with raw photos. I just got the Canon 5D Mark III and CS4 now can not read the raw photos. It has raw version 5.7.0.213 and CS4 version 11.0.2. Can anyone help?

I have CS4 and was using a Canon 5D Mark II with raw photos. I just got the Canon 5D Mark III and CS4 now can not read the raw photos. It has raw version 5.7.0.213 and CS4 version 11.0.2. Can anyone help?

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
EOS 5D Mark II
CR2
5.2
2.2
EOS 5D Mark III
CR2
6.7, 7.1
4.1
Photoshop CS6
7.0
8.3
Photoshop CS5
6.0
6.7
Photoshop CS4
5.0
5.7
The 5D Mark II was first supported by Camera Raw 5.2 which is compatible with CS4+.
The 5D Mark III was first supported by Camera Raw 6.7 and 7.1 which is only compatible with CS5 and CS6.
So the CS4 will never be able to open Raw 5D Mark III files.
Why doesn’t my version of Photoshop or Lightroom support my camera?
Choices:
Purchase CS6 full version (CS4 is too old to qualify for an upgrade)
Join the Cloud
Free option: download the free Adobe DNG converter, convert all 5D Mark III Raw files to DNG format then edit the DNGs in CS4
Photoshop Help | Digital Negative (DNG)

Itunes can't read songs to sync. Every few songs Itunes stops the sync because it can't read the song.

When I sync my ipad or iphone, Itunes will start syncing but after every few songs it syncs, itunes interupts the sync with a message saying it can't read the song. I can go to that song in my list of music and play it in itunes but itunes can't read it to sync. This has just started happening in the last week, 06/28/13.
Does anyone know what is going on. The message is as follows: iTunes could not copy "such and such song" to the iphone because the file could not be read.
rhpiper

I didn't understand what you mean. Most of the songs itunes flags are songs I have had on my list for a long time. I did notice something else. After it sends me the message and stops syncing. I press the apply button and it seams to save the song. Then I have to start resyncing and I noticed it syncs the song that it just previously couldn't read. The problem is I have to do this 50 times to get through a sync. Also, Itunes never stops on the same songs that it did the prior sync.

It can't read the chinese character in the search engine that I write on the Crystal Touch Penpower

Similar Messages

Maybe you are looking for