IT DOES NOT LEAVE ME TO BURN THE DVD WITH SUBTITLES

Hello ... my problem is:
I have 3 different subtitles, in English, French and Portuguese, but to the moment to burn the dvd a mistake happens: "Language codes for 'English' and 'English-2' must differ
Since I can do to solve it. Thank you

hmmm, thought I posted an response to this a while ago. Anyway, that was on the iphone.
But here now...
it sounds like you have two subtitle tracks marked as English. There are small codes to the left of each subtitle track. Simply make sure that they are all different: EN English, ES Espanole, PT Portuguese.
http://dl.dropbox.com/u/129533/subtitle_codes.png
http://dl.dropbox.com/u/129533/selectsubtitlelanguage.png

Similar Messages

My imac does not start anymore (stops at the screen with the apple and a rotating circle). An idea what I could try to make it start again?

My Imac does not start anymore.
==> What I have already done:
1) I tried with the tigger dvd to reinstall. It didn't succeed.
2) Via the single mode, when starting I got the message "disk0s2: I/0 error" several times. After that I got "Root device is mounted read-only"
3) Nevertheless, I tried the "fsck -yf" function. After checking "Journal HFS Plus volume", "extends overflow file", "catalog file"... and invalid record count
==> /dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8
Can someone advices me? I red on the internet I could reformat the disk... loosing all the data I didn't backed up. How am I suppose to reformat?
Thanks in advance,
Fred

Reset the SMC: http://support.apple.com/kb/HT3964
Reset the PRAM: http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
Restart the computer while holding down your mouse button which if you hold it down long enough (5 minutes at most) should eject the disk
If the disk still doesn't come out at that point then you need hardware evaluation;
contact Apple, contact an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.

What codec does iDVD 09 use to burn the DVD?

Hello All,
I might be looking in the wrong place, but I couldn't find this information. Does it use MPEG2? Can I use H.264?
thanks,
Mike

DVDs use 720x480 mpeg2, with AC3 audio or PCM audio up to 24bit/96khz. They also accept halfD1 mpeg2 and mpeg1, although that is not used much at all these days. Every DVD you are probably familiar with uses 720x480 mpeg2.
H.264 is not part of the DVD spec; it is used in Blu-ray, as are VC1 and mpeg2 in high-def resolutions.
Also, it doesn't matter what format you feed iDVD; it will transcode to mpeg2. Just be sure to use a good editing format that won't degrade quality. H.264 is a bad choice; the transcoding to mpeg2 will introduce problems.
Jeremy

I am having trouble clicking on anything in gmail. have tried to reply to mail, open contacts etc but does not open. Have tried the same with safari with no problems

I can open gmail but unable to open contacts, reply/forward to email... i click on the various icons but it just permanently shows 'loading' ... If I try to open gmail via safari or vista there is no problem . . .
I have re-installed firefox but makes no difference

Do you have the right boxes checked/entered right settings?
iTunes 11 for Mac: Sync contacts, calendars, and other info with iPod, iPhone, or iPad

I recently bought an airport express and tried to set it up through my iphone5 wifi settings but the airport setup does not show up. Is the problem with the airport express itself?

Nothing comes up in the airport utilities app either. The amber light continuously blinks. I also tried connecting an ethernet cord.

We have a netgear n150 router in our house as well but it doesn't connect to my phone or MacBook. That's connected to a Windows PC.
Is this Netgear router your "main" wireless router? That is, is it connected directly to the Motorola modem by Ethernet? Which exact model of the AirPort Express do you have? How do you have the Express configured to work with the Netgear?

I created in iMovie, and extracted audio from one of the clips to use in the title sequence. All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

I created in iMovie, and extracted audio from one of the clips to use in the title sequence. All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

I am on a MacBook Pro with OS 10.6.7 running iMovie '11 and iDVD 7.1.1. Thanks for any input.

Can anyone tell me how to get crossfade to work...was working ok, but now for some reason when i click on a track and try to drag on a fade it just highlights the track but does not leave a fade on?

can anyone tell me how to get crossfade to work...was working ok, but now for some reason when i click on a track and try to drag on a fade it just highlights the track but does not leave a fade on?

Hello mate!
Are you sure u have the option on the up-right side of the arrange window checked to x-fade?

Hello, I'm using Mountain Lion and mail does not leave the mails on the server, either on iCloud nor on other suppliers (orange). They are both using iMap protocol... Any place where I could change this ? Thanks for any hall; Christian

Hello, I'm using Mountain Lion and mail does not leave the mails on the server, either on iCloud nor on other suppliers (orange). They are both using iMap protocol... Any place where I could change this ? Thanks for any hall; Christian

Under what circumstances does mail "not leave the mails on the server"?
If you mean that you delete them (or move them out of the inbox) on one device and then find them not in the inbox on the server when you look from another device, that's how IMAP is supposed to work. (Note that the deletion or moving might be the result of rules you have set up in Mail.)
If you mean something else, please explain your issue in more detail.

I had an accident with my ipod. i did not know that; nowadays, the warranty does not cover my ipod if the screen is cracked. but now the battery is not working. the warranty does help me for something??

i want help, not the same comments that i will not be helped. i admit my fault as the owner that i had the accident, but i believed that i was secured with my warranty. otherwise i would ha decided to do not have it if i was going to be the one paying to be fixed... how can i still trust Aplee Corp if the are not helping me with a devise that i paid the price that they decided giving me a warranty to be sure that i am secure while i use my devise. now i would like to know if i can have a refund of the warranty because i am looking for a different way to fix it because i have to pay and pay. but i paid for this situation and i had such assintance leaving me aside telling me that i am hopeless and also that i have to pay more and more.
ir does not work like that. i feel bad being treated like that.

angelferuz wrote:
nowdays, the warranty does not cover my iPod if the screen is cracked.
It never - ever has. The manufacturer's warranty covers you against faults due to manufacturing. (So if the screen did crack due to a manufacturing defect, Apple warranty would cover it, BUT - Apple would be aware and would be able to identify the cause of a cracked screen due to manufacturing defects, so ...)
Since you did not want comments telling you what you don't want to hear, you should condsider yourself lucky that you have any replies to this post. Sometimes, the truth hurts.

Does Safari use up bandwidth if I leave it running in the background with zero tabs open? Do I have to quit the application each time I am done to avoid exceeding my internet usage/host quota?

If I leave Safari running in the background with zero tabs open, does it still use up bandwidth? Do I have to quit the application each time I am done to avoid exceeding my internet usage/host quota? I'd rather not have to since quitting the application and restarting it when I need to will quickly become tedious, but if that saves me on bandwidth usage, I'll do it. Thanks!

iStat pro is another good means of checking your Mac's activity. Set it up within Dashboard. It is a free facility.
iStat pro for Mac - CNET Download.com

Encore does not see blu ray burner OSX

Running CS 5.5 under OSX 10.5.8. Encore does not find my Pioneer burner. Burner works fine and is seen by the OS. Any suggestions? Thanks!

Running CS 5.5 under OSX 10.5.8. Encore does not find my Pioneer burner. Burner works fine and is seen by the OS. Any suggestions? Thanks!

PRE 12 does not detect my BD burner

I have a Liteon Blu Ray burner which PrE 12 does not detect when I try and burn a BD disc. However if I select DVD to burn a disc PrE does detect the same burner. I never had this issue in previous versions of PrE.
Any suggestions?
Russell

Russell
Unfortunately Premiere Elements (any version) does not have a burn to folder for Blu-ray.
What computer operating system is your Premiere Elements 12 running on? For now, I will assume Windows 7, 8, or 8.1 64 bit.
Have you updated 12 to 12.1 Update, using an opened project's Help Menu/Update? If not, please do so.
Difficult problem which may force you into looking at an external Blu-ray burner for your Premiere Elements 12/12.1 burn to Blu-ray unless you
want to try to replace the Liteon internal for another brand/model internal Blu-ray burner. Can you borrow an external Blu-ray burner from an associate to determine if that route will work for you?
But, let us try two approaches to determine if either will have any impact on this situation....
1. Delete the Adobe Premiere Elements Prefs file and, if necessary, the whole 12.0 Folder in which it exists.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then you delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
2. If "1" does not work, then let us go to
a. Deactivation via Help Menu/Sign Out of an opened project. Close out of there and then....
b. Uninstall via the usual Control Panel/Programs route
c. free ccleaner run through (regular cleaner and registry cleaner parts) to get rid of leftovers from incomplete uninstalls/reinstalls
d. reinstall with antivirus and firewall(s) disabled.
3. Usual drill...
a. Do you have the latest version of QuickTime installed
b. Running program from User Account with Administrative Privileges and Run As Administrator applied to desktop icon of the program
Please review and consider and then we can decide what next.
Thanks.
ATR

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
Sounds like a repair issue, which is not easy to do in India :(

When I try and play music on my iPhone downloaded from iTunes it says 'this URL is not found on this server'. This does not happen when I play the same music through my iPad. Can anyone help?

When I try to play music downloaded from itunes on my iPhone 4S it says 'this URL is not found on the server'. This does not happen when I play the same music on my iPad. The music plays fine. The message also comes up when I try and login to iTunes on my iMac. Can anyone help?

I too am having the same issue as the OP.
Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

IT DOES NOT LEAVE ME TO BURN THE DVD WITH SUBTITLES

Similar Messages

Maybe you are looking for